Product and Cut-out Dimensions
G1262SCVi Slimline Dishwasher
23" min.
C
17 3/4"
Location Codes
C -
Cutout (2 1/4" x 4") for water, drain
and electric pass-through. Adjust
according to water and drain location.
D -
5 foot flexible drain hose connects
lower center rear.
E -
5 foot - 120 Volt - 15 Amp 3-wire
molded plug power supply connects
lower left rear.
W -
5 foot "Double Waterproof" flexible
water intake hose connects lower
center rear.
Notes
• All installations must be done in
accordance with local codes
• Additional 2" in height may be attained by
ordering extension feet
Water & Electrical
Connection
32 1/16" - 34 5/8"
D
W
E
1 3/8"
Location
22 1/2"
5 1/2 min"
17 5/8"
32 1/16" - 34 5/8"
1 3/4" - 9"
4 5/8"
NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 011008
Front Panel Information
G1262SC Fully Integrated Models
Custom Panel Installations
Some Miele dishwashers do not come equipped with a front panel. These dishwashers are designed to accept a
custom door panel supplied by the cabinet maker. Miele has a unique panel integration system which allows the
dishwasher to align with the surrounding cabinets.
Panel size is determined in the following manner:
Miele
Fully
Integrated
Dishwasher
TKH
HTC
Panel Height
Width: 17 1/2" in all cases
Thickness: 3/4" in all cases
Height:Determined using the following calculation:
Panel Height = HTC - TKH
HTC = Height to the underside of countertop
TKH = Toe-kick height
Note: Control panel is along the top edge of the unit. It
is not visible when the unit is closed.
A handle MUST be located on the front panel in
order to open the unit
Maximum panel height: 31 7/8"
Minimum panel height: 27 3/16"
Maximum panel weight: 21 Pounds
GFVi Installations
Miele offers pre-fabricated stainless steel panels for all fully integrated units. These panels are designed for various
toe-kick heights and offer a choice of handle options.
NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 011008