Miele F1913SF, F1903SF Specifications

Built-In
36” Freezer

F 1913 SF / F 1903 SF

Specification Sheets TRS 01092018

8mieleusa.com

F 1913 SF / F 1903 SF
Features:

• MasterCool controls

• ClearView lighting system

• Drop and Lock Shelves

• SmartFresh storage drawers

• FullView storage drawers

• Ice maker

• RemoteVision capable

• Acoustic door and temperature
alarm

• Optical door and temperature
alarm

• Energy Star

Built-In 36” Freezer with Internal Ice Maker

F 1913 SF / F 1903 SF

SPECIFICATIONS

F 1903 SF — Item 37190311USA - Right Hinged

F 1913 SF — Item 37191311USA - Left Hinged

Overall Unit Width - Excluding Fascia Dimension 35

Overall Unit Height - Excluding Fascia Dimension 84” (2134 mm)

Overall Unit Depth - Excluding Fascia Dimension 24” (610 mm)

Overall Fascia Dimensions

Niche

Minimum Cabinet Opening Width

Minimum Cabinet Opening Height 84” (2134 mm)

Minimum Cabinet Opening Depth 24” (610 mm)

Interior Volume

Freezer Volume

Plumbing

Water Supply Requirements

Water Connection Line

Electrical

Electrical Requirements - Volts/Amps

Power Cord - Plug and length NEMA 5-15 plug, 5 ft (1.52 m)

Shipping

Shipping Weight 511.6 lbs (232 kg)

Shipping Dimensions 39

Support

Call Miele [phone]

Miele Website

20/20 Link

Please note the following:

• This specication sheet is for a single built-in unit.

• When combining multiple MasterCool units side-by-side, please refer to the Merging Kit

specication sheet.

*If design calls for a partition less than 6 5/16” (160 mm) the left unit’s cutout will require an
additional 1/8” (3 mm) to the width to allow installation of the Heating Mat/Merge Kit.

3

/4” (908 mm)

1

/2” (927 mm) W x 841/2” (2146 mm) H

36

3

/4” (19 mm) D

x

36” (915 mm)

19.21 cu-ft (544 L)

Connect to a cold water supply only. Do not
connect to a low-mineral or a reverse
osmosis system. Must be connected to a
shut-off valve. The water shut-off valve must
be accessible after installation. The water
pressure must be between 25 psi (1.7 bar)
and may not exceed 80 psi (5.5 bar). If the
pressure is higher than 80 psi (5.5 bar), a
pressure reducing valve must be installed.

Standard 1/4” O.D flexible water line needed.
The maximum outer diameter of the water
pipe (without fittings): 3/8” (10 mm). Water
line is not included.

110V / 120V, 60Hz, 15 Amps
In the case of side-by-side installations,
a separate outlet must be used for each
appliance.

1

/2” W x 893/4” H x 291/4” D

8www.mieleusa.com

82020technologies.com

F 1913 SF / F 1903 SF

Page 2 of 4

Built-In 36” Freezer with Internal Ice Maker

F 1913 SF / F 1903 SF

FOR PROUD INSTALLATION

Outer Trim Details*

* Outer Trim runs completely across the top and down
the sides of the unit. The Side Trim stops at the
bottom edge of the door panel.

Fascia dimensions

F 1913 SF / F 1903 SF

Page 3 of 5

Built-In 36” Freezer with Internal Ice Maker

POWER SUPPLY AND WATER CONNECTION
BACK VIEW

F 1913 SF / F 1903 SF

Water connection is located in front of unit.

1/4” compression tting is needed.

Electrical - 5 foot (1.52 m) - 120 Volt - 15 Amp - NEMA 5-15 molded plug

Water line - 1/4” exible water line - not included

DOOR PANEL DIMENSIONS
WITHOUT OUTER TRIM
DIMENSIONS

/8” (2029 mm)

7

79

353/4” (908 mm)

353/4” (908 mm)

4”

(102 mm)

F 1913 SF / F 1903 SF

Page 4 of 5

rooD °511rooD °09

HINGING DETAILS

Built-In 36” Freezer with Internal Ice Maker

F 1913 SF / F 1903 SF

Door Swing

18”

(457 mm)

8 3/8"

MAX

NOTE: Additional space needed depending on the thickness

of front panels and handle used.

Freezer units cannot be stop pinned at 90°

F 1913 SF / F 1903 SF

Specification Sheets TRS 01092018

Page 5 of 5