Medion MD 11197 user Manual

11197 EN Aldi USA RC4 QSG.FH11 Tue Mar 18 08:55:47 2008 Seite 1
C M Y CM MY CY CMY K
Digital Body Fat Scale
Quick Set-Up Guide
INSERTING BATTERIES
- Open the battery compartment on the rear of the scale.
- Insert the 4 AAA batteries. Observe the polarity as shown by the diagram in the compartment.
- Close the battery compartment.
THE DISPLAY
Body water level
Body fat level
Body muscle level
Male user
Female user
Athletic mode
Age
Age
Central Support 866-633-4660 Web Support www.medionusa.com Model Number: MD 11197
W
Display of weight
lb
Memory space
Weight in pound
ENTERING PERSONAL DATA
1 ) Select height
2 ) Select age
3 ) Select gender
4 ) Choose athletic mode (on/off)
5 ) Select desired memory preset number. If the selected memory space is already in use, the display shows "HAVE". Replace the chosen preset number or choose another.
Age
lb
Age
Age
lb
lb
Probedruck
11197 EN Aldi USA RC4 QSG.FH11 Tue Mar 18 08:55:47 2008 Seite 2
MEASURING WEIGHT, BODY FAT, AND BODY WATER
To measure body fat and water you have to stand barefoot on the square measuring points on the scale where the electrodes are located. Your feet must be dry and not moist. Stand on the scale with straight legs and without bending your knees; ensure that your knees do not touch each other.
- Press the the screen.
- When the option is flashing press the UP and DOWN buttons at the same time.
- Select the desired memory preset number. Use the UP button to select the uneven memory preset numbers and the DOWN button to select the even ones.
- Confirm your selection by pressing the saved values are displayed.
- Now stand on the scales and carry out the measurement. Notice that your feet should touch the stainless steel portion.
ON/OFF
or
button. The most recently entered option flashes on
SET
button. A beep sounds. The
and
Age
lb
Age
lb
C M Y CM MY CY CMY K
The following is displayed on the screen in quick succession:
Age
Weight
lb
Body fat and water measured
lb
W
Percentage of body fat
lb
W
Percentage of body water
lb
Then the scale turns off automatically.
ERROR MESSAGES
The batteries are low and should be changed.
Error in measuring the weight (overtime). The scale could not measure the weight within 20 seconds. Repeat the measurement and ensure that you stand securely.
SUPPORT
Probedruck
Professional, friendly customer support
We're here to help you.
Please call us TOLL FREE at:
1-866-633-4660
if you have any questions or problems setting up or using
your Body Fat Scale.
Customer Care Hours:
8:00 am - 12:00 am
Central Time
7 Day/Week
Incorrect use or unstable base. Take the measurement again.
The maximum weight (396 lb) has been exceeded.
Error in measuring the body fat percentage. Ensure that you are barefoot and standing securely.
Clean the soles of your feet with a dry cloth and carry out the measurement again; Message will also appear if the maximum body fat percentage has been exceeded.
Battery level too low. Replace the batteries.
Loading...