McIntosh LS-360 Owners manual
LS360 Loudspeaker System
Owners
Manual
LS360
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549
WARNING - TO REDUCE RISK OF
FIRE OR ELECTRICAL SHOCK, DO
NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
IMPORTANT SAFETY
INSTRUCTIONS!
PLEASE READ THEM BEFORE
OPERATING THIS EQUIPMENT.
General:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Warning: To reduce risk of fire or electrical shock,
do not expose this equipment to rain or moisture.
This unit is capable of producing high sound pressure levels. Continued exposure to high sound pressure levels can cause permanent hearing impairment or loss. User caution is advised and ear protection is recommended when playing at high volumes.
6. Only use attachments/accessories specified by the
manufacturer.
Installation:
7. Install in accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other equipment (including
amplifiers) that produce heat.
9. Do not use this equipment near water.
10. Do not expose this equipment to dripping or splashing
and ensure that no objects filled with liquids, such as
vases, are placed on the equipment.
11. Use only with the cart, stand, tripod,
bracket, or table specified by the manufacturer, or sold with the equipment. When a
cart is used, use caution when moving the
cart/equipment combination to avoid injury from tipover.
NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
Care of Equipment:
12. Clean only with a dry cloth.
13. Do not permit objects or liquids of any kind to be
pushed, spilled and/or fall into the equipment through
enclosure openings.
Repair of Equipment:
14. Refer all servicing to qualified service personnel. Servicing is required when the equipment has been damaged in any way, liquid has been spilled or objects
have fallen into the equipment, the equipment has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
15. Do not attempt to service beyond that described in the
operating instructions. All other service should be referred to qualified service personnel.
16. When replacement parts are required, be sure the service technician has used replacement parts specified by
McIntosh or have the same characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.
17. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks
to determine that the product is in proper operating
condition.
2
Thank You
Table of Contents
Your decision to own this McIntosh LS360 Loudspeaker
System ranks you at the very top among discriminating
music listeners. You now have The Best. The McIntosh
dedication to Quality, is assurance that you will receive
many years of musical enjoyment from this unit.
Please take a short time to read the information in this
manual. We want you to be as familiar as possible with all
the features and functions of your new McIntosh.
Please Take A Moment
The serial number, purchase date and McIntosh dealer
name are important to you for possible insurance claim or
future service. The spaces below have been provided for
you to record that information:
Serial Number:
Purchase Date:
Dealer Name:
Technical Assistance
If at any time you have questions about your McIntosh
product, contact your McIntosh dealer who is familiar with
your McIntosh equipment and any other brands that may
be part of your system. If you or your dealer wish additional help concerning a suspected problem, you can receive technical assistance for all McIntosh products at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-1545
Fax: 607-723-3636
Customer Service
If it is determined that your McIntosh product is in need of
repair, you can return it to your dealer. You can also return
it to the McIntosh Laboratory Service Department. For assistance on factory repair return procedure, contact the
McIntosh Service Department at:
Safety Instructions ............................................................. 2
Thank You and Please Take a Moment ............................. 3
Technical Assistance and Customer Service ..................... 3
Table of Contents and General Notes................................ 3
Introduction ....................................................................... 4
Performance Features ........................................................ 4
Dimensions ...................................................................5 - 6
Installation ......................................................................... 7
How to Connect ................................................................. 8
Front and Rear Views ........................................................ 9
Specifications .................................................................. 10
Packing Instruction .......................................................... 11
General Notes
1. It is very important that loudspeaker cables of adequate size
be used in your music system, to ensure that there will be no
power loss or heating. Cable size is specified in Gauge
numbers or AWG (American Wire Gauge). The smaller the
Gauge number, the larger the wire size:
If your loudspeaker cables are 25 feet (7.62m) or less, use
at least 18 Gauge (AWG) wire size or larger.
If your loudspeaker cables are 50 feet (38.1m) or less, use
at least 16 Gauge (AWG) wire size or larger.
If your loudspeaker cables are 100 feet (76.2m) or less,
use at least 14 Gauge (AWG) wire size or larger.
The Loudspeaker Connection Terminals can accept up to
12 Gauge (AWG) wire.
2. For additional connection information, refer to the owner s
manual(s) for any component(s) connected to the LS360
Loudspeaker.
3. The LS360 has built-in speaker protection in the form of three
automatic resetting solid-state devices as part of the
crossover network. One protects the tweeters, one the
midrange and the other the woofers. The characteristics of
this protection are that a certain amount of overdrive is
allowed but extended periods of overdrive will trigger
protection. If an obvious lack of high or low frequencies is
noticed, the Loudspeaker Protection Device may have
activated. Sound output from the Loudspeaker Element
affected will be reduced when the protection is triggered. The
protection devices will automatically reset when the volume
control is reduced significantly and kept low until the output
of the affected Loudspeaker Element returns to normal.
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3515
Fax: 607-723-1917
Copyright 2000 ã by McIntosh Laboratory, Inc.
3
Introduction
Introduction and Performance Features
The McIntosh LS360 Loudspeaker System is designed for
Home Theater and Music Reproduction. It is a three-way
system with two 10 inch LD/HP
HP midrange and five 1 inch dome tweeters. The LS360 is
designed to work as a Left or Right (Main) Loudspeaker in
a Music System, or as a Main or Surround Loudspeaker in
a Home Theater System.
The LS360 Loudspeaker performance is equivalent to
the quality of McIntoshs legendary line of Amplifiers,
Preamplifiers, Signal Processors and Signal Sources, without imparting distortion or coloration of its own. It also
complements the capabilities and the remarkably low distortion of McIntosh Power Amplifiers.
Many of todays loudspeakers are designed only for
Home Theater applications. Not so with the LS360. It is
also designed for the accurate reproduction of music. Motion picture sound effects, explosions, screams, and vehicle crashes require a wide dynamic range and high sound
levels. These sounds are such that a speaker system having
moderate distortion would reproduce them with little audible difference. This is not true with the reproduction of
music. Music is by nature and definition harmonious. To
reproduce it accurately, all forms of distortion, both harmonic and intermodulation, must be kept to a minimum.
This has been the result of the design of the new McIntosh
LS360 Loudspeaker System. Each loudspeaker element
and crossover component has been carefully designed for
durability, efficiency, and above all, low distortion. The
McIntosh LS360 Loudspeaker System will reproduce music accurately and function as an excellent Home Theater
Loudspeaker.
1
woofers, one 8 inch LD/
Performance Features
Patented LD/HP Technology
The McIntosh Low Frequency and Midrange Loudspeaker
Elements feature the patented LD/HP motor structure. This
design, when compared to conventional Loudspeaker
Elements, reduces distortion significantly. It also increases
power handling and efficiency.
Shielded Magnetic Field
The LS360 may be used in Home Theater Installations
near a television receiver or monitor without causing the
television image to degrade. McIntosh has designed
special shielding around the magnetic structure of the
LS360 Loudspeaker Elements to prevent interference.
High Power Handling
The Loudspeaker Elements and crossover components of
the LS360 are all chosen for use with powerful amplifiers
up to 600 watts.
High Efficiency
The Loudspeaker Elements used in the LS360
Loudspeaker System have also been designed for high
efficiency. As a result any McIntosh Power Amplifier, even
our smallest, will provide satisfying room filling sound.
Automatic Overload Protection
The LS360 has built-in Loudspeaker Element Protection in
the form of three automatic resetting solid-state devices as
a part of the crossover network.
Gold Plated Input Connectors
The LS360 input connectors are gold plated for superior
corrosion resistance and high electrical conductivity.
Five Tweeter Bessel Function Array
The LS360 utilizes five tweeters wired to produce a Bessel
Function Array. The individual tweeter amplitudes and
phase relationships are adjusted so the array acts as a high
frequency point source. One advantage of such an
arrangement is a very smooth and even acoustic polar
response. This allows the listener to move off axis without
suffering a change in high frequency output. The use of
multiple tweeters, combined with a mechanical heat sink,
also provides greatly increased power handling at high
frequencies.
4
Flared Acoustic Bass Ports
The Acoustic Bass Ports in the LS360 have flared front
and rear openings to eliminate air movement noise.
1
LD/HP Pat. No. 5,151,943
Loading...