MARL 515 Technical data
How to Order:
website: www.marl.co.uk
•
email: sales@marl.co.uk •webstore: www.leds.co.uk
•
Telephone +44 (0)1229 582430•Fax: +44 (0)1229 585155
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
PART NUMBER COLOUR LENS VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE
DC (Vdc) DC (mA) INTENSITY LENGTH TEMP TEMP
Vopr lopr lv@20mA (mcd) λp (nm) Topr Tstg
515-501-04 Red Colour Diffused 2.6 20 11000 624 -40 ~ +95^ -40 ~ +100 Yes
515-521-04 Yellow Colour Diffused 2.8 20 16000 591 -40 ~ +95^ -40 ~ +100 Yes
515-532-04 Green Colour Diffused 4.1 20 23000 527 -40 ~ +95^ -40 ~ +100 Yes
515-930-04 Blue Colour Diffused 4.1 20 7000 470 -40 ~ +95^ -40 ~ +100 Yes
515-997-04 Cool White Colour Diffused 4.1 20 14000 * -40 ~ +95^ -40 ~ +100 Yes
UNITS Vdc mA mcd nm °C °C
l Bright nickel plated brass housing
l Atex approved to EN50028 (EN50014)
l Sealed to IP67
l Wide viewing angle
l Suitable for high vibration applications
PROFESSIONAL
LED INDICATORS Ø12.7mm Mounting
SAMPLES AVAILABLE
© MARL INTERNATIONAL LTD 2006 : DS 039/06 Issue 1
Ordering Information & Typical Technical Characteristics (Ta = 25°C)
Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.
FEATURES
SPECIFICATION
HIGH INTENSITY
515 SERIES
PACK QUANTITY = 10 PIECES
Max forward DC current vs ambient
temperature (Tjmax=105°C)
* = Typical emission colour: cool white x=0.31, y=0.32
Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a
batch.
^ = Products must be derated when used above 45°C - Refer to fig 1.
fig 1
Page 1 of 2
515 Series
MATERIALS
Body Brass to BS 2874 CZ121 nickel plated BS 1224
Nut Brass to BS 2874 CZ121 nickel plated BS 1224
Panel Seal Viton
Cable Zyrad 500
Fresnel lens Polycarbonate
Clear Encapsulation Stycast 1264A / 1264B catalyst
Blue Encapsulation Stycast 2850FT / 24LV catalyst
TECHNICAL CHARACTERISTICS
SERIES MAXIMUM MAXIMUM PANEL MOUNTING MINIMUM MIN/MAX. BODY LOCK
POWER REVERSE CUTOUT TORQUE MOUNTING PANEL WASHER
DISSIPATION VOLTAGE CENTRES THICKNESS
515 1000 1000 12.7 1.0 x,y=19.5 1.5-5.0 Nickel Plated Zinc Plated
Brass Steel
UNITS mw Vdc mm Nm mm mm
Page 2 of 2
Anode termination indicated by red sleeve
BS EN ISO 9001:2000
Approved Manufacturer
website: www.marl.co.uk
•
email: sales@marl.co.uk •webstore: www.leds.co.uk
•
Telephone +44 (0)1229 582430•Fax: +44 (0)1229 585155
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
Dimensions in mm (Typical)
Not to scale
© MARL INTERNATIONAL LTD 2006 : DS 039/06 Issue 1
Loading...