Marantz VC5400, PMD970 User Manual

Model VC5400/PMD970 User Guide
DVD Player
R
2
Safety Precautions
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING: Do not install this equipment in a confined space such as a book case or similar unit.
CAUTION:
This Digital Video Disc Player employs a Laser System. To ensure proper use of this product, please read this owner’s
manual carefully and retain for future reference should the unit require maintenance, contact an authorized service location (see service procedure).
Use of controls, adjustments, or the performance of proce­dures other than those specified herein may result in haz­ardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.
NOTES ON COPYRIGHTS:
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection tech­nology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
SERIAL NUMBER: The serial number is found on the back of this unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase.
Model No. ___________________________________ Serial No. ___________________________________
WARNING: TO REDUCE THE RISK OF FIRE OR ELEC­TRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
3
INTRODUCTION
Table of Contents
Introduction
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Front Panel and Display Window . . . . . . . . . . . . . . 6
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Preparation
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting to Optional Equipment . . . . . . . . . . . 10
Before Operation . . . . . . . . . . . . . . . . . . . . . . . 11-15
General Explanation. . . . . . . . . . . . . . . . . . . . . . 11
On-Screen Display . . . . . . . . . . . . . . . . . . . . 11-12
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 13-15
Initial Settings General Operation. . . . . . . . . 13
Language . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Parental Control. . . . . . . . . . . . . . . . . . . . . . 15
Operation
Operation with DVD and Video CD . . . . . . . . . 16-20
Playing a DVD and Video CD. . . . . . . . . . . . . . . 16
Exchanging discs during playback . . . . . . . . 16
Skipping discs . . . . . . . . . . . . . . . . . . . . . . . 16
Exchanging the disc and starting playback . . 16
General Features . . . . . . . . . . . . . . . . . . . . . . . . 17
Moving to another TITLE . . . . . . . . . . . . . . . 17
Moving to another CHAPTER/TRACK . . . . . 17
Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Paus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Still Picture and Frame-by-Frame Playback . 17
Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 17
Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 18
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Time Search . . . . . . . . . . . . . . . . . . . . . . . . 18
3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 18
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Marker Search. . . . . . . . . . . . . . . . . . . . . . . 19
Special DVD Features . . . . . . . . . . . . . . . . . . . . 19
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 19
Changing the Audio Language. . . . . . . . . . . 19
Changing the Audio Channel . . . . . . . . . . . . 19
Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
DVD Audio Discs . . . . . . . . . . . . . . . . . . . . . . . . 20
Moving to another GROUP
. . . . . . . . . . . . . . 20
Viewing another PAGE. . . . . . . . . . . . . . . . . 20
Operation with Audio CD and MP3/WMA Disc
. . 21-22
Playing an Audio CD and MP3/WMA Disc . . . . . 21
Notes on MP3/WMA Recordings . . . . . . . . . . . . 21
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Moving to another Track . . . . . . . . . . . . . . . 22
Repeat Track/ All/ Off. . . . . . . . . . . . . . . . . . 22
Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 22
3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 22
Changing the Audio Channel . . . . . . . . . . . . 22
Operation with JPEG Disc. . . . . . . . . . . . . . . . . . . 23
Viewing a JPEG disc . . . . . . . . . . . . . . . . . . . . . 23
Moving to another File . . . . . . . . . . . . . . . . . 23
Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . 23
To flip the picture . . . . . . . . . . . . . . . . . . . . . 23
To rotate picture. . . . . . . . . . . . . . . . . . . . . . 23
Notes on JPEG Recordings . . . . . . . . . . . . . 23
Programmed Playback . . . . . . . . . . . . . . . . . . . . . 24
Programmed Playback with Audio CD and
MP3/WMA Disc . . . . . . . . . . . . . . . . . . . . . . . . . 24
Programmed Playback with Video CD . . . . . . . . 24
Repeat Programmed Tracks . . . . . . . . . . . . 24
Erasing a Track from Program List. . . . . . . . 24
Erasing the Complete Program List . . . . . . . 24
Additional Information . . . . . . . . . . . . . . . . . . . . . 25
Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Video Mode Setting . . . . . . . . . . . . . . . . . . . . . . 25
HDCD Playback. . . . . . . . . . . . . . . . . . . . . . . . . 25
Reference
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Speaker Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Language Code List . . . . . . . . . . . . . . . . . . . . . . . 28
Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . 29
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
About the symbols for instructions
Indicates hazards likely to cause harm to the unit itself or other material damage.
Indicates special operating features of this unit.
Indicates tips and hints for making the task easier.
4
Before Use
Playable Discs
DVD video discs (8 cm / 12 cm disc)
DVD audio discs (8 cm / 12 cm disc)
Video CD (VCD) (8 cm / 12 cm disc)
Audio CD (8 cm / 12 cm disc)
In addition, this unit can play a HDCD, DVD-R, DVD±RW, Kodak PICTURE CD, SVCD, and CD-R or CD-RW that contains audio titles, MP3, WMA or JPEG files.
Notes
– Depending on the conditions of the recording equip-
ment or the CD-R/RW (or DVD-R/±RW) disc itself, some CD-R/RW (or DVD-R/±RW) discs cannot be played on the unit.
– Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions.
Notes on DVDs and Video CDs
Some playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available or other functions may be added. Refer also to the instructions supplied with the DVDs and Video CDs. Some DVDs made for business pur­poses may not be played on the unit.
Regional code of the DVD player and DVDs
This DVD player is designed and manufactured for playback of region “2” encoded DVD soft­ware. The region code on the labels of some DVD discs indicates which type of player can play those discs. This unit can play only DVD discs labeled “2” or “ALL”. If you try to play any other discs, the message “Check Regional Code” will appear on the TV screen. Some DVD discs may not have a region code label even though their play­back is prohibited by area limits.
Disc-related terms
Title (DVD video discs only)
The main film content or accompanying feature content or additional feature content, or music album. Each title is assigned a title reference number enabling you to locate it easily.
Chapter (DVD video discs only)
Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chap­ters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded.
Group (DVD audio discs only)
The main audio content or accompanying feature content or additional feature content, or music album. Each group is assigned a group reference number enabling you to locate it easily.
Track (DVD audio discs,Video CD and audio CD only)
Sections of a picture or a musical piece on a video CD or an audio CD. Each track is assigned a track number, enabling you to locate the track you want.
Scene
On a video CD with PBC (Playback control) functions, moving pictures and still pictures are divided into sec­tions called “Scenes”. Each scene is displayed in the menu screen and assigned a scene number, enabling you to locate the scene you want. A scene is composed of one or several tracks.
Types of video CDs
There are two types of video CDs:
Video CDs equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact with the system via menus, search functions, or other typical computer-like operations. Moreover, still pictures of high resolution can be played if they are included in the disc.
Video CDs not equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC.
HDCD (High Definition Compatible Digital®)
HDCD® (High Definition Compatible Digital®) is a recording system that has improved audio CD sound in dynamic range, sound field reproducibility and vocal acoustics. This DVD player is equipped with an HDCD decoder. The HDCD indicator illuminates when playing an HDCD-encoded audio CD.
2
5
INTRODUCTION
Before Use (Continued)
Precautions
Handling the unit
When shipping the unit
The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory.
When setting up the unit
The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc.
To keep the exterior surfaces clean
Do not use volatile liquids, such as insecticide spray, near the unit. Do not leave rubber or plastic products in contact with the unit for a long period of time. They will leave marks on the surface.
Cleaning the unit
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.
To obtain a clear picture
The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer.
Notes on Discs
Handling discs
Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface. Do not stick paper or tape on the disc.
Storing discs
After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun­light, as there may be a considerable temperature increase inside the car.
Cleaning discs
Fingerprints and dust on the disc can cause poor pic­ture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the cen­ter out.
Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.
About Symbols
About the symbol display
” may appear on the TV screen during operation. This icon means the function explained in this owner’s manual is not available on that specific DVD video disc.
About the disc symbols for instructions
A section whose title has one of the following symbol is applicable only to the disc represented by the symbol.
DVD Video discs DVD Audio discs Video CDs with the PBC (playback control)
function. Video CDs without the PBC (playback control)
function. Audio CDs. MP3 disc. WMA disc. JPEG disc.
JPEG
WMA
MP3
CD
VCD1.1
VCD2.0
DVD-A
DVD-V
6
Front Panel and Display Window
Disc Tray
Insert a disc here.
Forward Skip/Scan (
TT / RR
)
Go to NEXT chapter/track.
Press and hold for two seconds for
a fast forward search.
Reverse Skip/Scan (
QQ / SS
)
Go to beginning of current
chapter/track or to PREVIOUS chap-
ter/track.
Press and hold for two seconds for a
fast reverse search.
STOP ( 99)
Stops playback.
PAUSE ( ;;)
Pause playback temporarily/ press repeatedly
for frame-by-frame playback.
PLAY ( 22)
Starts playback.
STANDBUY
Lights green when the DVD player is turned on.
POWER
ON/STANDBUY
Switches the player ON and OFF.
Display window
Shows the current status of the player.
Remote Sensor
OPEN/CLOSE ( //)
Opens or closes the
disc tray.
DISC SKIP
Moves to the next available disc tray.
DISC EX-CHANGE
Changes a disc (other than the one playing) during playback
Indicates current player function: Playback, Pause, etc.
A light will appear if a disc is in the
disc tray. The current disc tray flashes.
ANGLE Lights when multi angles are
present.
DVD video disc inserted
DVD audio disc inserted
CD Audio CD inserted
VCD Video CD inserted
HD CD HDCD disc inserted
MP3 MP3 or WMA disc inserted
TITLE Indicates current title number
CHP/TRK Indicates current chapter or track number
Indicates total playing time/elapsed time
PROG. Programmed playback active
RANDOM RANDOM
playback active
Indicates repeat mode
DVD
ADVD
MP3 VCD CDHD ADVD
1
2
5
34
TITLE
CHP/TRK
PROG.
RANDOM ALL
AB
7
INTRODUCTION
Remote Control
Remote control battery installation
Detach the battery cover on the rear of the remote control, and insert two R03 (size AAA) batteries with and aligned correctly.
Caution
Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).
Remote Control Operation Range
Point the remote control at the remote sensor and press the buttons.
Distance: About 23 ft (7 m) from the front of the remote sensor.
Angle: About 30° in each direction of the front of the remote sensor.
AAA
AAA
MARKER •
Marks any point during playback.
SEARCH •
Displays MARKER SEARCH menu.
POWER
Switches DVD Player ON and OFF.
AUDIO
Selects an audio language (DVD) or
an audio channel (CD).
SUBTITLE
Selects a subtitle language.
0-9 number buttons
Selects numbered items in a menu.
Reverse SKIP/SCAN (
SS
) •
Search backward*/ go to beginning
of current chapter or track or go to
previous chapter or track.
* Press and hold button for about
two seconds.
PLAY (
HH
) •
Starts playback.
Forward SKIP/SCAN (
TT
) •
Search forward*/ go to next chap-
ter or track.
OSD
Accesses On-Screen display.
MENU
Accesses menu on a DVD disc.
TOP MENU •
Displays the discs Top menu, if
available.
SETUP •
Accesses or removes setup menu.
RETURN •
- Removes the setup menu.
- Displays the menu of a video CD with PBC.
- Selects AUX A/V input channel of TV.
OPEN/CLOSE
Opens and closes the disc tray.
ANGLE
Selects a DVD camera angle if available
RANDOM
Plays tracks in random order.
PROGRAM
Enters to the program edit mode or exits from that.
CLEAR
Removes a track number on the program list or a mark on the MARKER SEARCH menu.
• ZOOM
Enlarges video image.
• STOP ( 99)
Stops playback.
• PAUSE/STEP ( ;;)
Pauses playback temporarily/ press repeatedly for frame-by-frame playback.
SELECT/ENTER
Acknowledges menu selection.
SLOW (
,, / ..
)
Reverse/ Forward slow playback.
11 22 33 44
(left/right/up/down)
- Selects an item in the menu.
- Selects channel of TV and changes volume of TV.
• REPEAT
Repeat chapter, track, title, all.
• A-B
Repeat sequence.
• DISC SKIP
Moves to the next available disc tray.
8
Rear Panel
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
AUDIO OUT (Left/Right)
Connect to an amplifier, receiver, or stereo system.
VIDEO OUT
Connect to a TV with video inputs.
AC Power Cord
Plug into the power source.
S-VIDEO OUT
Connect to a TV with S-Video inputs.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
5.1 CHANNEL AUDIO OUT
Connect to a 5.1 channel receiver – center speaker connection – subwoofer connection – front speakers connections – rear (surround) speakers connections
**REMOTE CONTROL
INTERNAUEXTERNAL Switch
RS232C Terminal
Control terminal for use by custom installers.
* REMOTE CONTROL IN/OUT jacks
By connecting this DVD player to another Marantz audio component uslng a supplled System Control cable, you can remotely operate the components as a single system.
• When connecting to component with a remote sensor, be sure to connect the “REMOTE CONTROL IN” jack of this DVD player to the “REMOTE CONTROL OUT” jack of the component with the remote semsor.
• When connecting to component which is not equipped with a remote sensor, be sure to connect the component to the “REMOTE CONTROL OUT” jack of this DVD player.
** Remote switch
• When using this DVD player independently, set this switch to “INTERNAL”. When using this DVD player in a sys­tem with a Marantz receiver equlpped with a remote sensor, set the switch to “EXTERNAL”.
* REMOTE CONTROL IN/OUT jack
Connections
Tips
Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described below.
Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.
For better sound reproduction, connect the player’s AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See “Connecting to Optional Equipmenton page 10.
Caution
Make sure the DVD Player is connected directly to the TV. Tune the TV to the correct video input channel.
– Do not connect the DVD Player’s AUDIO OUT jack to
the phono in jack (record deck) of your audio system.
– Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection system.
Connecting to a TV
Make one of the following connections, depending on the capabilities of your existing equipment.
Video connection
11
Connect the VIDEO OUT jack on the DVD Player to the video in jack on the TV using the video cable (V).
22
Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV (A) using the audio cables.
S-Video connection
11
Connect the S-VIDEO OUT jack on the DVD Player to the S-Video in jack on the TV using the S-Video cable (S).
22
Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV (A) using the audio cables.
Component Video (Color Stream®) connection
11
Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN jacks on the DVD Player to the corresponding in jacks on the TV using an Y Pb Pr cable (C).
22
Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV (A) using the audio cables.
Progressive Scan (ColorStream®pro) connection
If your television is a high-definition or “digital ready” television, you may take advantage of the DVD Player’s progressive scan output for the highest video resolution possible.
If your TV does not accept the Progressive Scan for­mat, the picture will appear scrambled if you try Progressive Scan on the DVD Player.
11
Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN jacks on the DVD Player to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C).
22
Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV (A) using the supplied audio cables.
Notes
– Set the Progressive to “On” on the setup menu for
progressive signal, see page 13.
– Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack).
PREPARATION
9
Rear of TV
S-VIDEO
INPUT
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Pr
Y
Pb
AUDIO INPUT
L
VIDEO
INPUT
R
L
S A VC
Rear of DVD player
Connections (Continued)
Connecting to Optional Equipment
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic
Connect the Left and Right AUDIO OUT jacks on the DVD Player to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the audio cables (A).
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)
11
Connect one of the DVD Player’s DIGITAL AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the cor­responding in jack on your amplifier. Use an option­al digital (optical O or coaxial X) audio cable.
22
You will need to activate the player’s digital output. (See “Digital Audio Output” on page 14).
Digital Multi-channel sound
A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your DVD Player (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver.
Caution:
Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.
Notes
If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.
– Six Channel Digital Surround Sound via digital con-
nection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder.
–To see the audio format of the current DVD in the on-
screen display, press AUDIO.
Analog connection to a multi-channel A/V receiver with 6 Channel connectors (Dolby Digital)
This DVD Player contains a multi-channel decoder. This enables playback of DVDs recorded in Multi-channel Surround without the need for an optional decoder.
11
Connect the CENTER and WOOFER jacks for the Center speaker and the Subwoofer (C) to the corre­sponding in jacks on your receiver.
22
Connect the Left and Right FRONT speaker jacks (F) to the corresponding in jacks on your receiver.
33
Connect the Left and Right REAR speaker jacks (R) to the corresponding in jacks on your receiver.
44
Make the appropriate Sound settings for Analog Output and Speaker Settings in the setup menu. See page 14.
10
Rear of DVD player
Rear of DVD player
AXO
R
OPTICAL COAXIAL
Amplifier (Receiver)
L
AUDIO INPUTDIGITAL INPUT
Amplifier (Receiver)
Center Subwoofer
Front R Rear R
Front L Rear L
ANALOG 5.1CH
AUDIO INPUT
RCF
Before Operation
Caution:
Before using the remote control, press the DVD or TV button to select the device to be operated.
General Explanation
This manual gives basic instructions for operating the DVD Player. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indi­cating that the operation is not permitted by the DVD Player or is not available on the disc.
On-Screen Display
General playback status can be displayed on the TV screen. Some items can be changed on the menu.
On-screen display operation
11
Press OSD during playback.
22
Press 33/44to select an item.
The selected item will be highlighted.
33
Press 11/22to change the setting of an item.
The number buttons can be also be used for setting numbers (e.g., title number). For some functions, press SELECT/ENTER to execute the setting.
Temporary Feedback Field Icons
Repeat Title
Repeat Chapter
Repeat Group (DVD audio discs only)
Repeat Track (non-PBC Video CDs and DVD audio discs only)
Repeat All Tracks (non-PBC Video CDs only)
Repeat A-B
Repeat Off
Resume play from this point
Action prohibited or not available
Notes
Some discs may not provide all of the features on the
on-screen display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
PREPARATION
Items
Title Number
Chapter Number
Time search
Audio language and Digital Audio Output mode
Subtitle language
Angle
Sound
Function (Press
33/44
to select desired item)
Shows the current title number and total number of titles, and skips to the desired title number.
Shows the current chapter number and total number of chapters, and skips to the desired chapter number.
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
Shows the current audio soundtrack language, encoding method, and channel number, and
changes the setting.
Shows the current subtitles language, and
changes the setting.
Shows the current angle number and total number of angles, and changes the angle number.
Shows the current sound mode, and
changes the setting.
Selection Method
11 / 22
,or
Numbers, SELECT/ENTER
11 / 22
,or
Numbers, SELECT/ENTER
Numbers, SELECT/ENTER
11 / 22
,or
AUDIO
11 / 22
,or
SUBTITLE
11 / 22
,or
ANGLE
11 / 22
,or
SOUND
1 /3
1 /12
0:20:09
1 ENG
D
5.1 CH
OFF
1 /1
NORM.
ABC
11
DVD-V
TITLE
CHAPT
GROUP
TRACK
ALL
A B
OFF
Before Operation (Continued)
12
DVD-A
Items
Track Number
Time
Audio Channel
Sound
Function (Press
33/44
to select desired item)
Shows the current track number, total number of tracks and PBC On mode, and skip to the desired track number.
Shows the elapsed playing time (Display only)
Shows the audio channel, and
changes the audio channel.
Shows the current sound mode, and
changes the setting.
Selection Method
11 / 22
,or
Numbers, SELECT/ENTER
11 / 22
,or
AUDIO
11 / 22
,or
SOUND
1 /4
0:20:09
STER.
NORM.
VCD2.0
VCD1.1
On-Screen Display (Continued)
d
Items
Group Number
Track Number
Time search
DVD Audio Output mode
Subtitle language
Page (or Angle)
Function (Press
33/44
to select desired item)
Shows the current group number and total number of groups, and skips to the desired group number.
Shows the current track number and total number of tracks, and skips to the desired track number.
Shows the elapsed playing time.(Display only)
Shows the current encoding method, and channel number, and changes the setting.
Shows the current subtitles language, and
changes the setting.
Shows the current page (or angle) number and total number of pages (or angle), and changes the page (or angle) number.
Selection Method
11 / 22
,or
Numbers, SELECT/ENTER
11 / 22
,or
Numbers, SELECT/ENTER
_
11 / 22
,or
AUDIO
11 / 22
,or
SUBTITLE
11 / 22
,or
ANGLE
2 /6
1 /12
0:10:15
1
PPCM
5 CH
OFF
ABC
1 /12
1 /1
or
PREPARATION
13
Before Operation (Continued)
Initial Settings
You can set your own Personal Preferences on the player.
Initial Settings General Operation
11
Press SETUP.
The setup menu appears.
22
Press 33/44to select the desired item.
The screen will show the current setting for the selected item, as well as alternate setting(s).
33
While the desired item is selected, press 22, then
33/44
to select the desired setting.
44
Press SELECT/ENTER to confirm your selection.
Some items require additional steps.
55
Press SETUP, RETURN, or PLAY to exit the setup menu.
Language
Disc Language
Select a language for the disc’s Menu, Audio, and Subtitle.
Original : The original language set for the disc is selected. Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the lan­guage code list on page 28. If you enter the wrong language code, press CLEAR.
Menu Language
Select a language for the setup menu. This is the menu you see when you press SETUP.
Picture
TV Aspect
4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars above and below the picture. 4:3 Panscan: Select when a conventional TV set is connected. The video material formatted in the Pan & Scan style is played back in that style (Both sides of the picture are cut off).
16:9 Wide: Select when a 16:9 wide TV is connected.
Progressive Scan
Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN jacks, but are connecting the DVD Player to a standard (analog) television, set Progressive Scan to Off. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On.
Note
Progressive Scan only works when the system is set to NTSC or AUTO. Also if the system is set to AUTO, Progressive Scan only works during DVD of NTSC system is playing back .
Caution
Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. Press STOP to stop any disc that is play­ing. Next, press STOP again and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor.
DVD
DVD
DVD
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Original
English
French
German
Spanish
Italian
Chinese
Polish
Hungarian
Other – – – –
Original
English
French
German
Spanish
Italian
Chinese
Polish
Hungarian
Other – – – –
English
Spanish
French
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
4:3
4:3
16:9
Off
On
Letterbox
Panscan
Wide
Before Operation (Continued)
Sound
Digital Audio Output
Each DVD disc has a variety of audio output options. Set the player’s Digital Audio Output according to the type of audio system you use. DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM” if you connected the DVD Player’s DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equip­ment with a Dolby Digital decoder). Stream/PCM: Select “Stream/PCM” if you connected the DVD Player’s DIGITAL OUT jack to an amplifier or other equipment with a DTS decoder, Dolby Digital decoder or MPEG decoder. PCM: Select when connected to a 2-channel digital stereo amplifier. The DVD player outputs sounds in the PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital, MPEG1, or MPEG2 recording system.
Sample Frequency
To change the Sample Frequency setting, first select the desired Digital Audio Output as indicated as above. If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them. If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is made, this unit will pass each type of signal through without any further processing.
5.1 Speaker settings
Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog Multi­Channel Output. (See “Speaker Settings”, page 27.)
Others
The DRC, Vocal, PBC and Auto Play settings can be changed.
Press
33/44
to select the desired item and press SELECT/ENTER. The setting of the selected item is changed between On and Off.
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s sound­track in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect.
Vocal
Set Vocal to On only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc will mix into normal stereo sound.
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played the same way as Audio
CDs.
Auto Play
You can set up the DVD Player so a DVD disc automat­ically starts playing whenever the DVD is inserted. If Auto Play mode is set to On, this DVD player will search a title that playback time is long most and then play back the title automatically.
On: Auto Play function is activated. Off: Auto Play function is not activated.
Note
The Auto Play function may not work for some DVDs.
DVD
DVD
14
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
DOLBY DIGITAL
Stream/PCM
PCM
Sample Freq.
48 KHz
96KHz
Front L
Volume 0 dB
Size Large
Distance 1 ft
Test
Return
/PCM
R R
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
DRC
Vocal
PBC
Auto Play
On
On
On
Off
PREPARATION
15
Before Operation (Continued)
Parental Control
Rating
Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. Ratings are country-dependent. The Parental Control feature allows you to prevent discs from being played by your children or to have certain discs played with alternative scenes.
11
Select “Rating” on the Setup menu using the
33/44
buttons.
22
While “Rating” is selected, press 22.
33
When you have not entered a password yet.
Enter a 4-digit password using the numbered but­tons to create a personal 4-digit security password. then press SELECT/ENTER. Enter the 4-digit pass­word again and press SELECT/ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numbered but­tons to confirm the personal 4-digit security pass­word, then press SELECT/ENTER.
If you make a mistake before pressing SELECT/ENTER, press CLEAR and enter 4-digit security password again.
44
Select a rating from 1 to 8 using the 33/44but­tons. One (1) has the least playback restrictions. Eight (8) has the most playback restrictions.
Unlock: If you select Unlock, Parental Control is not active. The disc will play in full. Ratings 1 to 8: Some discs contain scenes not suitable for children. If you set a rating for the play­er, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, play­back will stop. You must enter the 4-digit password or change the rating level in order to play the disc.
55
Press SELECT/ENTER to confirm your rating selection, then press SETUP to exit the menu.
Country Code
Enter the code of a country/area whose standards were used to rate the DVD video disc, referring to the list (See “Country Code List”, page 29.).
11
Select Country Code using the 33/44buttons on the setup menu.
22
While Country Code is selected, press 2.
33
Follow step 3 of “Rating” on left.
44
Select the first character using the 33/44buttons.
55
Shift the cursor using 2 button and select the second character using 33/44buttons.
66
Press SELECT/ENTER to confirm your country code selection, then press SETUP to exit the menu.
Note
Confirmation of the 4-digit password is necessary when the code is changed (see “Changing the 4-digit code” below.).
Changing the 4-digit code
1 Follow Steps 1-2 as shown above to the left (Rating). 2 Enter the old code, then press SELECT/ENTER. 3 Select Change using 33/44buttons then press
SELECT/ENTER.
4 Enter the new 4-digit code, then press
SELECT/ENTER.
5 Enter exactly the same code a second time and veri-
fy by pressing SELECT/ENTER.
6 Press SETUP to exit the menu.
If you forget your 4-digit code
If you forget your password, to clear the current pass­word, follow the procedure below.
1 Press SETUP to display the setup menu. 2 Use the Number buttons to enter the 6-digit number
“210499”.
The 4-digit password is cleared. “P CLr” appears on the display for a moment.
3
Enter a new code as shown above to the left (Rating).
DVD
DVD
C N
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
8
7
6
5
4
3
2
1
Unlock
Change
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Code Set
U S
Operation with DVD and Video CD
Playing a DVD and Video CD
Playback Setup
Turn on the TV and select the video input source con-
nected to the DVD player.
Audio system: Turn on the audio system and select
the input source connected to the DVD player.
11
Press OPEN/CLOSE to open the disc tray.
22
Load your chosen disc in the tray, with the playback side down.
• Discs can be loaded one at a time by pressing DISC SKIP to rotate the carousel.
33
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and playback starts automatically. If playback does not start, press PLAY. In some cases, the disc menu might appear instead.
If a menu screen is displayed
The menu screen may be displayed first after loading a DVD or Video CD which offer a menu.
Use the
11 223344
buttons to select the title/chapter you want to view, then press SELECT/ENTER to start play­back. Press TOP MENU or MENU to return to the menu screen.
Use the
11 22 33 44
buttons to select an option you
want, then press SELECT/ENTER to view the option.
Use the number buttons to select the track you want to view. Press RETURN to return to the menu screen.
Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on the each menu screen. You also may set PBC to Off under setup. See page
14.
Notes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized (see “Parental Control, on page 15).
– DVDs may have a region code.
Your player will not play discs that have a region code different from your player. The region code for this player is 2 (two).
Exchanging discs during playback
Press DISC EX-CHANGE on the front panel during
playback to open the disc tray.
Press DISC SKIP to rotate the disc trays to the
desired position. The carousel will rotate clockwise by one disc increments.
Exchange the discs and press DISC EX-CHANGE or
OPEN/CLOSE to close the disc tray.
Note
– The disc tray presently loaded in the play position can
not be exchanged.
Skipping discs
Press DISC SKIP during play or when playback is stopped.
Notes
– When DISC SKIP is pressed, the disc tray rotates and
playback begins from the beginning of the next disc.
– If there is no disc on the next disc tray, the following
disc tray will be selected.
– When DISC SKIP is pressed during playback of disc
5, playback of disc 1 will start.
Exchanging the disc and starting playback
1.Press OPEN/CLOSE during playback or when play-
back is stopped.
Play stops (if pressed during playback), the disc tray opens and the disc that was in the play position comes to the front.
2.Exchange the disc.
3.Press OPEN/CLOSE or PLAY again.
The tray closes and playback begins (with the disc that was in front).
VCD2.0
DVD-A
DVD-V
VCD1.1VCD2.0
DVD-ADVD-V
16
Center position
Do not load a disc in the left and light side position.
OPERATION
17
Operation with DVD and Video CD
General Features
Note
Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.
Moving to another TITLE
When a disc has more than one title, you can move to another title as follows:
Press OSD, then press the appropriate numbered button (0-9) to select a title number.
Moving to another CHAPTER/GROUP/ TRACK
When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/group/track as follows:
Press SKIP/SCAN . or > briefly during playback to select the next chapter/group/track or to return to the beginning of the current chapter/group/track.
Press . twice briefly to step back to the previous chap­ter/group/track.
To go directly to any chapter during DVD playback, press OSD. Then, press 33/44to select the chapter/group/track icon. Then, enter the chapter/group/track number using the numbered buttons (0-9).
Note
For two-digit numbers, press the numbered buttons (0-9)in rapid succession.
Search
1 Press and hold SKIP/SCAN . or > for about
two seconds during playback.
The player will now go into SEARCH mode.
2 Press and hold SKIP/SCAN . or > repeatedly
to select the required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
3 To exit SEARCH mode, press PLAY.
Note
When using a DVD audio disc that includes pictures, this operation may be permitted in some picture segments.
Pause
1 Press PAUSE/STEP during playback. 2 To return to playback, press PLAY.
Still Picture and Frame-by-frame playback
1 Press PAUSE/STEP during playback.
The player will now go into PAUSE mode.
2 You can advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly on the remote con­trol.
Note
When using a DVD audio disc that includes pictures, this operation may be permitted in some picture segments.
Slow Motion
1 Press SLOW t or T during playback.
The player will enter SLOW mode.
2 Use the SLOW t or T to select the required speed:
t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or T 1/16, T 1/8, T 1/4 or T 1/2 (forward).
3 To exit slow motion mode, press PLAY.
Note
Slow motion playback in reverse is not applicable for Video CD.
Random
1 Press RANDOM during playback or in stop mode.
The unit automatically begins Random Playback and “RANDOM(1-3)” appears on the display window.
• RANDOM1: Plays all the tracks on a single disc in random order and then stops.
• RANDOM2: Plays all the tracks on current disc in random order and then plays all the tracks on each suc­ceeding disc in random order and then stops.
• RANDOM3: Plays 2 tracks randomly from a disc and then plays 2 tracks randomly from a different disc until all tracks on all discs have been played.
2 To return to normal playback, press RANDOM until
“RANDOM” disappears on the display window.
Tips
By pressing SKIP/SCAN > during Random playback, the unit selects another title (track) and resumes Random playback.
Note
This function only works with DVD Karaoke discs and
video CD without PBC.
On a Video CD with PBC, you must set PBC to Off on
the setup menu to use the Random function. See page 14.
VCD1.1VCD2.0
Karaoke DVD
VCD1.1VCD2.0
DVD-ADVD-V
VCD1.1VCD2.0
DVD-ADVD-V
DVD-A
VCD1.1VCD2.0
DVD-ADVD-V
VCD1.1
DVD-ADVD-V
DVD-V
1 /12
1 /3
1/6
1 /12
1 /3
Operation with DVD and Video CD
General Features (continued)
Repeat A-B
To repeat a sequence in a title or group: 1 Press A-B at your chosen starting point.
“ A * ” appears briefly on the TV screen.
2 Press A-B again at your chosen end point.
“A B” appears briefly on the TV screen, and the repeat sequence begins (“AsB” appears the display window).
3 To cancel the sequence, press A-B.
Repeat
DVD Video Discs - Repeat Chapter/Title/Off 1 To repeat the currently playing chapter, press
REPEAT.
The Repeat Chapter icon appears on the TV screen.
2 To repeat the title currently playing, press REPEAT a
second time.
The Repeat Title icon appears on the TV screen.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
DVD Audio Discs - Repeat Track/Group/Off 1 To repeat the currently playing track, press REPEAT.
The Repeat Track icon appears on the TV screen.
2 To repeat the group currently playing, press REPEAT
a second time.
The Repeat Group icon appears on the TV screen.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
Video CDs - Repeat Track/All/Off 1 To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the TV screen.
2 To repeat the disc currently playing, press REPEAT a
second time.
The Repeat All icon appears on the TV screen.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
Note
On a Video CD with PBC, you must set PBC to Off on the setup menu to use the Repeat function. See page 14.
Time Search
The Time Search function allows you to start playing at any chosen time on the disc.
1 Press OSD during playback. The on-screen display
appears on the screen.
The Time Search box shows the elapsed playing time of the current disc.
2 Within 10 seconds, press 33/44to select the Time
Search icon in the on-screen display.
The “-:--:--” appears in the Time Search box.
3 Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and sec­onds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers.
4 Within 10 seconds, press SELECT/ENTER to confirm
the start time.
Playback starts from the selected time on the disc. If you enter an invalid time, playback will continue from the current point.
3D Surround
This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multi­channel audio from a home theater system.
1 Press OSD during playback. 2 Press 3 or 4 to select the sound option.
The sound option will be highlighted.
3 Press 1 or 2 to to select “3D SUR”.
To turn off the 3D Surround effect, select “NORM”.
Zoom
The Zoom function allows you to enlarge the video image and to move through the enlarged image.
1 Press ZOOM during playback or still playback to acti-
vate the Zoom function.
If you press ZOOM repeatedly, the magnification level increases up to six steps.
2 Use the
11 223344
buttons to move through the zoomed
picture.
3 Press CLEAR to resume normal playback or return to
the paused image.
Note
The zoom function may not work for some DVDs.
VCD1.1VCD2.0
DVD-ADVD-V
VCD1.1VCD2.0
DVD-V
DVD-V
VCD1.1VCD2.0
DVD-ADVD-V
VCD1.1VCD2.0
DVD-ADVD-V
18
A BA *
OFF
CHAPT
TITLE
1/6
TRACK
ALL
OFF
0:20:09
-:--:--
NORM.
3D SUR
OPERATION
19
Operation with DVD and Video CD
General Features (continued)
Marker Search
You can start playback from a memorized point. Up to nine points can be memorized. To enter a mark, follow these steps.
1 During disc playback, press MARKER when
playback reaches the spot that you want to memorize.
The Marker icon will appear on the TV screen briefly.
2
Repeat step 1 to enter up to nine Marker points on a disc.
To Recall a Marked Scene 1 During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
2 Within 10 seconds, press 1/2 to select a Marker
number that you want to recall.
3 Press SELECT/ENTER.
Playback will start from the Marked scene.
4 To remove the MARKER SEARCH menu, press
SEARCH.
To clear a Marked Scene 1 During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
2 Press 1/2 to select the Marker number that you want
to erase.
3 Press CLEAR.
The Marker number will be erased from the list.
4 Repeat steps 2 and 3 to erase additional Marker
numbers.
5 To remove the MARKER SEARCH menu, press
SEARCH.
Special DVD Features
Checking the contents of DVD discs: Menus
DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Then, press the appropriate number button to select an option. Or, use the
11 223344
buttons to highlight your selection,
then press SELECT/ENTER.
Title Menu
1 Press TOP MENU.
If the current title has a menu, the menu will appear on the screen. Otherwise, the disc menu may appear.
2 The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
3 To remove the title menu, press TOP MENU again.
Disc Menu
1 Press MENU.
The disc menu is displayed.
2 To remove the disc menu, press MENU again.
Camera Angle
If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback.
Press ANGLE repeatedly during playback to select a desired angle.
The number of the current angle appears on the display.
Changing the Audio Language
Press AUDIO repeatedly during playback to hear a dif­ferent audio language or audio track.
Changing the Audio Channel
Press AUDIO repeatedly during playback to hear a dif­ferent audio channel (STER., LEFT or RIGHT).
Subtitles
Press SUBTITLE repeatedly during playback to see the different subtitle languages.
Note
If appears, the feature is not available on the disc.
DVD-ADVD-V
VCD1.1VCD2.0
DVD-ADVD-V
DVD-VDVD-A
DVD-VDVD-A
DVD-VDVD-A
DVD-ADVD-V
VCD1.1VCD2.0
DVD-V
1/9
MARKER SEARCH
1 /1
1 ENG
5.1 CH
1 PPCM
D
5 CH
ABC
1 ENG
Operation with DVD and Video CD
DVD Audio Discs
DVD Audio is a new disc format building on the success of DVD to provide high quality, uncompressed, multi­channel audio for a new experience in audio quality. A DVD Audio disc can be identified by the DVD audio logo on the disc jacket or on the disc itself.
DVD Audio can provide higher quality stereo than Audio CDs with a sampling rate of up to 192kHz (compared to
44.1kHz for CDs). DVD Audio digital sound can be delivered with up to 24 bits of data (compared to 16 bits for a standard CD).
A typical DVD Audio disc contains up to seven times the data capacity of a CD. This additional space is used for music, either Advanced Resolution multi-channel sound quality that is closer to the artist’s master recording or for longer recordings. Many DVD Audio discs contain on-screen text, such as artist biographies, playlists, or lyrics. Some DVD Audio discs contain photo galleries or video clips.
Note
To enjoy maximum sound quality and surround effect of DVD Audio, you must use 5.1 channel analog audio output (5.1CH AUDIO OUT jacks on the DVD Player). If you use the DIGITAL OUT (OPTICAL or COAXIAL) for your audio connection, the sound will only be similar to CD-quality sound even though you’re playing a DVD Audio disc.
Moving to another GROUP
Some DVD Audio discs divide content into different groups. Your player enables you to quickly access dif­ferent groups during playback via the on-screen display.
1 Press OSD during playback on in stop mode. 2 Press 33/44to select Group icon. 3 Press 1/2 or the numbered buttons (0-9) to select a
group number.
Note
Sometimes the author of the disc creates hidden con­tent that can only be accessed by entering a password. If the lock icon appears on the TV screen, enter the password (sometimes you’ll find it on the disc’s jacket cover or on a web site). This password control isn’t dic­tated by your DVD Player — it is a function of the disc. Since the authoring of DVD Audio Discs varies, some of the on-screen display choices might not be available for the disc you’re playing.
Viewing another PAGE
Since DVD Audio discs can hold a lot of content, there are various ways to see what’s available on the disc.
1 Press OSD during playback. 2 Press 33/44to select Page icon. 3 Press 1/2 to select a page number.
What appears on the screen will vary from disc to disc because the information available depends upon the way the disc was created.
Note
Since the authoring of DVD Audio Discs varies, some of the on-screen display choices might not be available for the disc you’re playing.
DVD-A
DVD-A
DVD-A
20
1 /12
1/6
OPERATION
21
Operation with Audio CD and MP3/WMA Disc
Playing an Audio CD and
MP3/WMA
Disc
The DVD Player can play MP3/WMA formatted record­ings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on right.
11
Insert a disc and close the tray. Audio CD; Audio CD menu appears on the TV
screen go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2
22
Press 33/44to select the MP3/WMA then press SELECT/ENTER.
The MP3/WMA menu appears on the TV screen. Press RETURN to move to the MP3/WMA-JPEG choice menu.
33
Press 33/
44
to select a folder, and SELECT/ENTER.
A list of files in the folder appears.
44
Press 33/44to select a track then press PLAY or SELECT/ENTER.
Playback starts. During playback, the current track’s elapsed playing time will appear on the display window and menu. Playback will stop at the end of the disc.
Press TOP MENU to move to the next page. Press MENU to move to the previous page.
Audio CD menu MP3/WMA menu
Tip
If you are in a file list and want to return to the Folder list, use the 33/44to highlight and press
SELECT/ENTER to return to the previous menu screen.
55
To stop playback at any other time, press STOP.
Notes on MP3/WMA Recordings
About MP3
An MP3 file is audio data compressed by using the MPEG1 audio layer-3 file-coding scheme. We call files that have the “.mp3” file extension “MP3 files”.
The player can not read an MP3 file that has a file extension other than “.mp3”.
About WMA(Window Media Audio)
An WMA file is a Microsoft audio compression technology.
WMA(Windows Media Audio) offers double the audio compression of the MP3 format.
MP3/WMA Disc compatibility with this player is limited as follows:
1. Sampling Frequency / only at 44.1kHz (MP3),
22.05 - 44.1kHz (WMA)
2. Bit rate / within 32 - 320kbps (MP3), 32 - 128kbps (WMA)
3. CD-R physical format should be “ISO 9660”
4. If you record MP3/WMA files using the software which cannot create a FILE SYSTEM, for example “Direct-CD” etc., it is impossible to playback MP3/WMA files. We recommend that you use “Easy­CD Creator”, which creates an ISO9660 file system.
5. A single session disc requires MP3/WMA files in the first track. If there is no MP3/WMA file in the 1st track, it cannot playback MP3/WMA files. If you wish to playback MP3/WMA files, format all the data in the disc or use a new one.
6. File names should be named using 8 letters or less and must incorporate “.mp3” or “.wma” extension e.g. “********.MP3” or “********.WMA”.
7. Do not use special letters such as “/ : * ? “ < > ” etc.
8. Total number of files on the disc should be less than
650.
This DVD player requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files). That require certain pre-existing conditions (see above) to insure compatible playback.
Customers should also note that permission is required in order to download MP3/WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.
WMA
MP3CD
Program
CD
STER. NORM.
0: 56: 18
TRACK01
TRACK02
TRACK03
TRACK04
TRACK05
TRACK06
TRACK07
TRACK08
Clear All
TRACK 1.mp3
TRACK 2.mp3 TRACK 3.mp3 TRACK 4.mp3 TRACK 5.mp3 TRACK 6.mp3 TRACK 7.mp3 TRACK 8.mp3
Program
MP3 WMA
OFF00:00
1
Clear All
JPEG
MP3 WMA
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
MP3 WMA
OFF00:00
Program
Clear All
22
Operation with Audio and MP3/WMA Disc (Continued)
Pause
1 Press PAUSE/STEP during playback. 2 To return to playback, press PLAY or press
PAUSE/STEP again.
Moving to another Track
Press SKIP/SCAN . or > briefly during playback to go to the next track or to return to the beginning of the current track.
Press SKIP/SCAN . twice briefly to step back to the previous track.
In case of audio CD, to go directly to any track, enter the track number using the numbered buttons (0-9) during playback.
Repeat Track/All/Off
1 To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appears on the menu screen.
2 To repeat all tracks on a disc, press REPEAT a sec-
ond time.
The Repeat icon and “ALL” appears on the menu screen.
3 To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appears on the menu screen.
Search
1 Press and hold SKIP/SCAN . or > for about
two seconds during playback.
The player will now go into SEARCH mode.
2 Press and hold SKIP/SCAN . or > repeatedly
to select the required speed: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward).
Search speed and direction are indicated on the menu screen.
3 To exit SEARCH mode, press PLAY.
Random
1 Press RANDOM during playback or when playback is
stopped. The unit automatically begins Random Playback and RANDOM or “RAND.” appears on the display window and menu screen.
2 To return to normal playback, press RANDOM repeat-
edly until RANDOM or “RAND.” disappears on the display window and menu screen.
Repeat A-B
To repeat a sequence. 1 During disc playback, press A-B at your chosen start-
ing point.
The Repeat icon and “A* ” appears on the menu screen.
2 Press A-B again at your chosen end point.
The Repeat icon and “A B” appears on the menu screen, and the sequence begins to play repeatedly.
3 To exit the sequence and return to normal play, press
A-B again.
The Repeat icon and “OFF” appears on the menu screen.
3D Surround
This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multi­channel audio from a home theater system.
1 Press OSD during playback. 2 Use 1 or 2 to select the sound option.
The sound option will be highlighted.
3 Use 3 or 4 to to select “3D SUR”.
To turn off the 3D Surround effect, select “NORM”.
Changing the Audio Channel
Press AUDIO repeatedly during playback to hear a different audio channel (STER., LEFT, or RIGHT).
CD
CD
CD
WMA
MP3CD
WMA
MP3CD
WMA
MP3CD
WMA
MP3CD
WMA
MP3CD
OPERATION
23
Viewing a JPEG disc
This DVD Player can play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right.
11
Insert a disc and close the tray.
The MP3/WMA-JPEG choice menu appears on the TV screen.
22
Press 33/44to select the JPEG then press SELECT/ENTER.
The JPEG menu appears on the TV screen.
33
Press 33/
44
to select a folder, and SELECT/ENTER.
A list of files in the folder appears. Press RETURN to move to the MP3/WMA-JPEG choice menu.
Tip
If you are in a file list and want to return to the Folder list, use the 34 buttons on the remote to highlight “
and press SELECT/ENTER to return to the
previous menu screen.
44
If you want to view a particular file, press 33/44to highlight a file and press SELECT/ENTER or PLAY.
Viewing the file proceeding starts. During viewing a file, press RETURN to move to the previous menu (JPEG menu).
Press TOP MENU to move to the next page. Press MENU to move to the previous page.
Tip
There are three viewing Slide Speed options: Fast, Normal, Slow, and Off. Press 1/2 to highlight the Slide Speed then press 3/4 to select the option you want to use, and press SELECT/ENTER.
55
To stop viewing at any other time, press STOP.
The JPEG menu appears.
Moving to another File
Press SKIP/SCAN . or > once during viewing a picture to advance to the next file or to the previous file.
Still Picture
1 Press PAUSE/STEP during slide show.
The player will now go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
To flip the picture
Press 33/44during showing a picture to flip the picture horizontally or a vertically.
To rotate picture
Press 1/2 during showing a picture to rotate the picture clockwise or counter clockwise.
Notes on JPEG Recordings
Depending upon the size and number of the JPEG files, it could take a long time for the DVD player to read the disc’s contents. If you don’t see an on­screen display after several minutes, some of the files are too big — reduce the resolution of the JPEG files to less than 2 mega pixels and burn another disc.
Total number of files and folders on the disc should be less than 650.
Some disc may be incompatible due to different recording format or condition of disc.
When you are using software such as “Easy CD
Creator” to burn the jpeg files into the CD-R, ensure that all the selected files have the “.jpg” extensions when copying into the CD layout.
If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” files.
File names without “.jpg” extension will not be able to
be read by this DVD player. Even though the files are shown as JPEG image files in windows explorer.
JPEG
Operation with JPEG Disc
Slide Speed
5/32 1024X768
Picture1.jpg
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
JPEG
Off
Folder1
MP3 WMA
JPEG
5/32 Picture5.jpg1024X768
Slide Speed
Off
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
JPEG
24
Programmed Playback
WMA
MP3
VCD1.1VCD2.0
CD
Programmed Playback with Audio CD and MP3/WMA Disc
The Program function enables you to store your favorite tracks from any disc in the player memory.
Program can contain 30 tracks.
11
Press PROGRAM during playback or in the stop mode to enter the Program Edit mode.
The mark will appear to the right of the word Program on the right side of the menu screen.
Note
Press PROGRAM to exit the Program Edit mode; the mark will disappear.
22
Select a track, then press SELECT/ENTER to place the selected track on the Program list.
33
Repeat step 2 to place additional tracks on the Program list.
Audio CD menu MP3/WMA menu
44
Press 2.
The programmed track you selected last is highlighted on the program list.
55
Press 33/44to select the track you want to start playing.
Press TOP MENU to move to the next page. Press MENU to move to the previous page.
66
Press PLAY to start.
Playback begins in the order in which you programmed the tracks and “PROG.” appears on the menu screen. Playback stops after all of the tracks on the Program list have played once.
77
To resume normal playback from pro­grammed playback, select a track of CD (or MP3/WMA) list and then press SELECT/ENTER.
“PROG.” indicator disappears on the menu screen.
Programmed Playback with Video CD
Note
On a Video CD with PBC, you must set PBC to Off on the setup menu to use the Program function. See page 14.
11
Insert Video CD and close the tray.
22
Press PROGRAM while playback is stopped.
The VCD Program menu will appear.
Note
Press RETURN or PROGRAM to exit the Program menu.
33
Follow steps 2-6 of “Programmed Playback with Audio CD and MP3/WMA disc” on left.
44
To resume normal playback from programmed playback, press PROGRAM.
“PROG.” indicator disappears in the display window.
Repeat Programmed Tracks
To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appears on the menu screen.
To repeat all tracks on the program list, press REPEAT a second time.
The Repeat icon and “ALL” appears on the menu screen.
To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appears on the menu screen.
Erasing a Track from Program List
1 Press PROGRAM during playback (Audio CD and
MP3/WMA disc only) or in the stop mode to enter the Program Edit mode.
The mark will appear.
2 Press 2 to move to the Program list. 3 Use 33/44to select the track that you wish to erase
from the Program list.
4 Press CLEAR.
The track will be erased from the Program list.
Erasing the Complete Program List
1 Follow steps 1-2 of “Erasing a Track from Program
List” as above.
2 Use 33/44to select “Clear All”, then press
SELECT/ENTER.
The complete Program for the disc will be erased. The programs are also cleared when the disc is removed.
E
E
E
TRACK 8.mp3
TRACK 2.mp3
TRACK 4.mp3
TRACK 3.mp3
Clear All
OFF00:00
E
Program
3
Clear All
E
MP3 WMA
TRACK 1.mp3 TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3 TRACK 5.mp3 TRACK 6.mp3 TRACK 7.mp3 TRACK 8.mp3
CD
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
0: 56: 18
Program
TRACK 12
TRACK 8
TRACK 10
TRACK 3
STER. NORM.
VCD
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
Program
E
Clear All
25
OPERATION
Additional Information
Screen Saver
The screen saver picture appears when you leave the DVD Player in stop mode for about five minutes. After the Screen Saver has been engaged for about five minutes, the DVD Player will automatically turn itself off.
Video Mode Setting
With certain discs, the playback picture may be flick­ering or Dot Crawl is shown on straight lines. That means Vertical interpolation or De-interlace is not perfectly matched with the disc. In this case, the picture quality may be improved by changing the video mode.
To change the video mode, press and hold DISPLAY about 3 seconds during disc playback. The new video mode number selected is displayed on the TV screen. Check whether the video quality has improved. If not, repeat the above procedure until picture quality is improved.
Video mode change sequence:
MODE1 MODE2 MODE3 MODE1
If you turn off the power, the video mode will be back to initial state (MODE1).
Detailed Descriptions for Video Modes
MODE1: The source material of the DVD video (film material
or video material) is determined from disc information. MODE2: Suitable for playing film based content or video based
material recorded by the progressive scan method. MODE3: Suitable for playing video based content with compar­atively little motion.
Note
The video mode setting only works when the Progressive Scan mode is set to “On” in the Setup menu.
HDCD Playback
HDCD is a process that increases the fidelity of both specially encoded HDCD discs and standard CD audio discs. When an HDCD-encoded disc is playing, the spe­cial decoder is automatically activated and the HDCD Indicator lights. No user intervention is required. To enjoy the benefits of HDCD, your DVD Player must be connected to your A/V receiver via the Analog Audio Outputs. However, if your A/V receiver or surround processor is equipped with built-in HDCD decoding, you may also use a Coaxial or Optical digital audio connec­tion so that the HDCD processing is done there.
VCD1.1VCD2.0
DVD-V
26
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Symptom
No power.
The power is on, but the DVD player does not work.
No picture.
No sound.
The playback picture is poor.
The DVD player does not start playback.
The remote control does not work properly.
Cause
The power cord is disconnected.
No disc is inserted.
The TV is not set to receive DVD signal
output.
The video cable is not connected
securely.
The connected TV power is turned off.The equipment connected with the
audio cable is not set to receive DVD signal output.
The audio cables are not connected
securely.
The power of the equipment connected
with the audio cable is turned off.
The Digital Audio Output is set to the
wrong position.
The disc is dirty.
No disc is inserted.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the guide.
The disc is dirty.The Rating level is set.
The remote control is not pointed at the
remote sensor of the DVD player.
The remote control is too far from the
DVD player.
There is an obstacle in the path of the
remote control and the DVD player.
The batteries in the remote control are
exhausted.
Correction
Plug the power cord into the wall outlet
securely.
Insert a disc. (Check that the DVD or,
audio CD indicator in the display window is lit.)
Select the appropriate video input mode
on the TV so the picture from the DVD player appears on the TV screen.
Connect the video cable securely.
Turn on the TV. Select the correct input mode of the
audio receiver so you can listen to the sound from the DVD player.
Connect the audio cable securely.
Turn on the equipment connected with
the audio cable.
Set the Digital Audio Output to the
correct position, then turn on the DVD player again by pressing POWER.
Clean the disc.
Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display is lit.)
Insert a playable disc. (Check the disc
type, color system, and Regional code.)
Place the disc with the playback side
down.
Place the disc on the disc tray correctly
inside the guide.
Clean the disc.Cancel the Rating function or change
the rating level.
Point the remote control at the remote
sensor of the DVD player.
Operate the remote control within 23 ft
(7 m).
Remove the obstacle.
Replace the batteries with new ones.
27
OPERATION
Speaker Settings
Make the following settings for the built-in 5.1 channel surround decoder.
11
Select “5.1 Speaker Setup” using the 33/44but­tons on the setup menu.
22
While “5.1 Speaker Setup” is selected, press 2 button.
33
Press 11/22buttons to select the desired speaker.
44
Adjust options by using
33 4411 22
buttons.
Speaker selection
Select a speaker that you want to adjust. (Front speak­ers (Left), Front speakers (Right), Center Speaker, Rear speakers (Left), Rear speakers (Right), or Subwoofer)
Note
Certain speaker settings are prohibited by the Dolby Digital licensing agreement.
Volume
Press 11/ 22to adjust the output level of the selected speaker. (-10dB - 0dB)
Size
Press 11/ 22to set a mode. (Large, Small or None)
If you have connected the system to a speaker with a low frequency of 100Hz or below, select “Large.”
If you have connected the system to a speaker with­out a low frequency of 100Hz or below, select “Small.” If you have not connected a subwoofer, always select “Large” for Front speaker (L/R).
When you do not have a certain speaker connected, select “None.”
Front L/R speaker’s size can be set to “Large” or “Small.”
If Front L/R speaker’s size is set to “Small,” Rear and Center speaker’s size can be set to “Small” or “None.”
Subwoofer’s size can be set only to “Large” or “None”.
Distance
If you connected speakers to your DVD Player, setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listen­er at the same time. (1 ft = 30.48 cm)
Test
Press SELECT/ENTER to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system.
Front Left (L) Front Right (R) Center
Rear Left (L) Rear Right (R)
Return
Press SELECT/ENTER to return to the previous menu.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
R R
Front L
Volume 0 dB
Size Large
Distance 1 ft
Test
Return
28
Language Code List
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 13).
Code Language
6566 Abkhazian
6565 Afar
6570 Afrikaans
8381 Albanian
6577 Ameharic
6582 Arabic
7289 Armenian
6583 Assamese
6588 Aymara
6590 Azerbaijani
6665 Bashkir
6985 Basque
6678 Bengali; Bangla
6890 Bhutani
6672 Bihari
6682 Breton
6671 Bulgarian
7789 Burmese
6669 Byelorussian
7577 Cambodian
6765 Catalan
9072 Chinese
6779 Corsican
7282 Croatian
6783 Czech
6865 Danish
7876 Dutch
6978 English
6979 Esperanto
6984 Estonian
7079 Faroese
Code Language
7074 Fiji
7073 Finnish
7082 French
7089 Frisian
7176 Galician
7565 Georgian
6869 German
6976 Greek
7576 Greenlandic
7178 Guarani
7185 Gujarati
7265 Hausa
7387 Hebrew
7273 Hindi
7285 Hungarian
7383 Icelandic
7378 Indonesian
7365 Interlingua
7165 Irish
7384 Italian
7465 Japanese
7487 Javanese
7578 Kannada
7583 Kashmiri
7575 Kazakh
7589 Kirghiz
7579 Korean
7585 Kurdish
7679 Laothian
7665 Latin
7686 Latvian, Lettish
Code Language
7678 Lingala
7684 Lithuanian
7775 Macedonian
7771 Malagasy
7783 Malay
7776 Malayalam
7784 Maltese
7773 Maori
7782 Marathi
7779 Moldavian
7778 Mongolian
7865 Nauru
7869 Nepali
7879 Norwegian
7982 Oriya
8065 Panjabi
8083 Pashto, Pushto
7065 Persian
8076 Polish
8084 Portuguese
8185 Quechua
8277 Rhaeto-Romance
8279 Rumanian
8285 Russian
8377 Samoan
8365 Sanskrit
7168 Scots Gaelic
8382 Serbian
8372 Serbo-Croatian
8378 Shona
8368 Sindhi
Code Language
8373 Singhalese
8375 Slovak
8376 Slovenian
8379 Somali
6983 Spanish
8385 Sudanese
8387 Swahili
8386 Swedish
8476 Tagalog
8471 Tajik
8465 Tamil
8484 Tatar
8469 Telugu
8472 Thai
6679 Tibetan
8473 Tigrinya
8479 Tonga
8482 Turkish
8475 Turkmen
8487 Twi
8575 Ukrainian
8582 Urdu
8590 Uzbek
8673 Vietnamese
8679 Volapük
6789 Welsh
8779 Wolof
8872 Xhosa
7473 Yiddish
8979 Yoruba
9085 Zulu
OPERATION
29
Code Country
AD Andorra AE United Arab Emirates AF Afghanistan AG Antigua and Barbuda AI Anguilla AL Albania AM Armenia AN Netherlands Antilles AO Angola AQ Antarctica AR Argentina AS American Samoa AT Austria AU Australia AW Aruba AZ Azerbaidjan BA Bosnia-Herzegovina BB Barbados BD Bangladesh BE Belgium BF Burkina Faso BG Bulgaria BH Bahrain BI Burundi BJ Benin BM Bermuda BN Brunei Darussalam BO Bolivia BR Brazil BS Bahamas BT Bhutan BV Bouvet Island BW Botswana BY Belarus BZ Belize CA Canada CC Cocos (Keeling) Islands CF Central African Republic CG Congo CH Switzerland CI Ivory Coast CK Cook Islands CL Chile CM Cameroon CN China CO Colombia CR Costa Rica CS Former Czechoslovakia CU Cuba CV Cape Verde CX Christmas Island CY Cyprus CZ Czech Republic DE Germany DJ Djibouti DK Denmark DM Dominica DO Dominican Republic DZ Algeria EC Ecuador EE Estonia EG Egypt EH Western Sahara
Code Country
ER Eritrea ES Spain ET Ethiopia FI Finland FJ Fiji FK Falkland Islands FM Micronesia FO Faroe Islands FR France FX France (European
Territory) GA Gabon GB Great Britain GD Grenada GE Georgia GF French Guyana GH Ghana GI Gibraltar GL Greenland GM Gambia GN Guinea GP Guadeloupe (French) GQ Equatorial Guinea GR Greece GS S. Georgia & S. Sandwich
Isls. GT Guatemala GU Guam (USA) GW Guinea Bissau GY Guyana HK Hong Kong HM Heard and McDonald
Islands HN Honduras HR Croatia HT Haiti HU Hungary ID Indonesia IE Ireland IL Israel IN India IO British Indian Ocean
Territory IQ Iraq IR Iran IS Iceland IT Italy JM Jamaica JO Jordan JP Japan KE Kenya KG Kyrgyzstan KH Cambodia6 KI Kiribati KM Comoros KN
Saint Kitts & Nevis Anguilla KP North Korea KR South Korea KW Kuwait KY Cayman Islands KZ Kazakhstan LA Laos LB Lebanon
Code Country
LC Saint Lucia LI Liechtenstein LK Sri Lanka LR Liberia LS Lesotho LT Lithuania LU Luxembourg LV Latvia LY Libya MA Morocco MC Monaco MD Moldavia MG Madagascar MH Marshall Islands MK Macedonia ML Mali MM Myanmar MN Mongolia MO Macau MP Northern Mariana Islands MQ Martinique (French) MR Mauritania MS Montserrat MT Malta MU Mauritius MV Maldives MW Malawi MX Mexico MY Malaysia MZ Mozambique NA Namibia NC New Caledonia (French) NE Niger NF Norfolk Island NG Nigeria NI Nicaragua NL Netherlands NO Norway NP Nepal NR Nauru NU Niue NZ New Zealand OM Oman PA Panama PE Peru PF Polynesia (French) PG Papua New Guinea PH Philippines PK Pakistan PL Poland PM Saint Pierre and Miquelon PN Pitcairn Island PR Puerto Rico PT Portugal PW Palau PY Paraguay QA Qatar RE Reunion (French) RO Romania RU Russian Federation RW Rwanda SA Saudi Arabia SB Solomon Islands
Code Country
SC Seychelles SD Sudan SE Sweden SG Singapore SH Saint Helena SI Slovenia SJ Svalbard and Jan Mayen
Islands SK Slovak Republic SL Sierra Leone SM San Marino SN Senegal SO Somalia SR Suriname ST Saint Tome and Principe SU Former USSR SV El Salvador SY Syria SZ Swaziland TC Turks and Caicos Islands TD Chad TF French Southern
Territories TG Togo TH Thailand TJ Tadjikistan TK Tokelau TM Turkmenistan TN Tunisia TO Tonga TP East Timor TR Turkey TT Trinidad and Tobago TV Tuvalu TW Taiwan TZ Tanzania UA Ukraine UG Uganda UK United Kingdom UM USA Minor Outlying
Islands US United States UY Uruguay UZ Uzbekistan VA Vatican City State VC Saint Vincent &
Grenadines VE Venezuela VG Virgin Islands (British) VI Virgin Islands (USA) VN Vietnam VU Vanuatu WF Wallis and Futuna Islands WS Samoa YE Yemen YT Mayotte YU Yugoslavia ZA South Africa ZM Zambia ZR Zaire ZW Zimbabwe
Country Code List
Enter the appropriate code number for the initial setting “Country Code” (See page 15).
Specifications
General
Power requirements AC 230V , 50 Hz Power consumption 16W Dimensions (approx.) 430 X 80 X 410 mm (w x h x d) Mass (approx.) 7.7 lbs (3.5 kg) Operating temperature 5˚C to 35˚C (41˚F to 95˚F) Operating humidity 5 % to 90 %
System
Laser Semiconductor laser, wavelength 650 nm Signal system NTSC Frequency response DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz Signal-to-noise ratio More than 100dB (ANALOG OUT connectors only) Harmonic distortion Less than 0.008% Dynamic range More than 100 dB (DVD)
More than 95 dB (CD)
Outputs
VIDEO OUT 1 Vp-p 75 Ω, sync negative, RCA jack x 1 S-VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 Ω COMPONENT VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 Audio output (digital audio) 0.5 V (p-p), 75 Ω, RCA jack x 1 Audio output (optical audio) 5 V (p-p), 75 Ω, Optical connector x 1 Audio output (analog audio) 2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
Accessory
Video cable . . . . . . . . . . . . . . . . . . . . . . .1
Audio cable . . . . . . . . . . . . . . . . . . . . . . .1
Remote control . . . . . . . . . . . . . . . . . . . .1
Batteries . . . . . . . . . . . . . . . . . . . . . . . . .2
Design and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. Dolby, MLP Lossless and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.
DTS and DTS Digital Out are registered trademarks of Digital Theater Systems, Inc.
, HDCD®, High Definition Compatible Digital®and Pacific Microsonics™are either registered trademarks or trademarks of Pacific Microsonics, Inc. in the United States and/or other countries. HDCD system manufactured under license from Pacific Microsonics, Inc. This product is covered by one or more of the following patents: United States: 5,479,168, 5,638,074, 5,640,161, 5,808,574, 5,838,274, 5,854,600, 5,872,531 and 5,864,311. Australia: 669114. Other patents pending.
30
P/NO : 3834RS00???
www.marantz.com
You can find your nearest authorized distributor or dealer on our website.
JAPAN Marantz Japan,Inc. 35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan
U.S.A. Marantz America, Inc. 1100 Maplewood Drive, ltasca, IL 60143, U.S.A.
EUROPE Marantz Europe B.V. P.O. Box 8744, 5605 LS Eindhoven, The Netherlands
is a registered trademark.
Printed in Korea
345W851312
Loading...