Speaker System
MKS1000/MKS800
InordertotakemaximumperformanceofthesoundthatMKS1000/MKS800haso er,andtoasatisfactory levelwithsafety,pleasereadthroughthisInstructionManualbeforesetupandoperation.
BEFORE USE
Be sure to turn o your Amplifier before connecting or disconnecting speakers.
Do not operate the speaker with power exceeding limitation, or it may damage the speaker.
CAUTION WHEN INSTALLING
Do not place the Speakers near heat source, such as radiator, or under direct sunlight.
Do not install the speakers on or at unstable location since it is rather heavy.
This speaker is magnetically shielded, so the speaker can be placed close to a TV but it may cause color splotch on the picture depending on type of TV or setting location.
If color splotch occurs;
1:Turn o the TV and turn it on again 15–30 min. later.
2:Or keep more distance between speakers and TV. Be aware if some magnets or magnetic materials are placed near, mutual e ect with the speaker can cause color splotch on the picture.
CONNECTIONS
Align the (+) and (-) polarities for Left ( L ) and Right
( R ) and connect the speaker terminals on the amplifier properly.
+ terminal : BLUE |
+ terminal : RED |
– terminal : BLACK |
– terminal : BLACK |
Right |
Left |
|
|
AMPLIFIER
Connect with speaker cable
Strip cable skin
Twist axial wire
|
Speaker |
|
|
cable |
|
Turn counter- |
Insert axial |
Turn clockwise to |
clockwise to loosen |
wore |
tighten |
Connect with Y lug |
|
|
|
Y lug |
|
Turn counter- |
Insert Y lug |
Turn clockwise to |
clockwise to loosen |
|
tighten |
Connect with Banana plug
Remove the speaker |
Insert banana plug |
terminal lid |
|