Marantz LN-7101-F Owners Manual

Model LN7101F Installation Guide

Anamorphic Lens System

The lightning ﬂash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING - TO REDUCE RISK OF

FIRE OR ELECTRICAL SHOCK, DO

NOT EXPOSE THIS EQUIPMENT TO

RAIN OR MOISTURE.

IMPORTANT SAFETY

INSTRUCTIONS!

PLEASE READ THEM BEFORE OPERATING THIS EQUIPMENT.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO

QUALIFIED PERSONNEL.

To prevent the risk of electric shock, do not remove cover or

back. No user-serviceable parts inside.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. Do not expose this equipment to dripping or splashing and ensure that no objects ﬁlled with liquids, such as vases, are placed on the equipment.

16. To completely disconnect this equipment from the a.c. mains, disconnect the power supply cord plug from the a.c. receptacle.

17. The mains plug of the power supply cord shall remain readily operable.

18. Do not expose batteries to excessive heat such as sunshine, ﬁre or the like.

ADDITIONAL SAFETY

INSTRUCTIONS!

WARNING:

THERE IS A POSSIBILITY OF SERIOUS INJURY IF YOU DO NOT FOLLOW THESE INSTRUCTIONS.

When mounting the projector to a building structure, it is important to follow all of the local building/construction codes. The total weight of the Marantz VP-11, LN7101F Anamorphic Lens System and MT20/EXT10 Mounting Brackets is 80 lbs (36.29 kg). Make sure the ceiling structural members can support five times the total weight, which is 400 lbs (181.44 kg). Proper installation procedure by qualified personnel as outlined in this installation guide is required. It is recommended that the Professionals at your Marantz Dealer, who are skilled in all aspects of installation and operation, install the Marantz Video System and any associated audio equipment. It is important to read this LN7101F Installation Guide and the VP-11 User Guide before starting the installation process. The instructions in this Installation Guide must be adhered to as failure to do so could result in serious injury. To prevent possible damage to the Lens As-

semblies, DO NOT at any time attempt to LIFT, CARRY or RE-ORIENT the equipment using the Lens.

A. Do not remove the cover from the equip-

ment.

B. Do not remove lens covers until instructed to

do so.

C. Do not insert anything into the equipment

through the ventilation holes.

D. Do not handle the mains lead with wet

hands.

E. No naked flame sources, such as lighted

candles, should be placed on the equipment.

F. Do not look into the lens when the projector

is turned on. It could damage your eyesight.

G. When disposing of used batteries, please

comply with governmental regulations or environmental public instructions rules that apply in your country or area.

Technical Assistance

If at any time you have questions about your Marantz product, contact your Marantz Dealer who is familiar with your Marantz equipment and any other brands that may be part of your system. If you or your Dealer wish additional help concerning a suspected problem, you can receive technical assistance for all Marantz products at:

Marantz America, Inc.

100 Corporate Drive

Mahwah, N.J. 07430-2041

Tech & Operational Support hours:

9:00 AM to 5:00 PM ET, M-F

Tel. 800-654-6633 Toll Free

Tel. 201-762-6666

Fax. 201-762-6687 Parts

Customer Service

If it is determined that your Marantz product is in need of repair, you can return it to your Dealer. You can also return it to the Marantz Service Department. For assistance on factory repair return procedure, contact the Marantz at:

Marantz America, Inc.

100 Corporate Drive

Mahwah, N.J. 07430-2041

General Office hours:

8:30 AM to 5:30 PM ET, M-F

Tel. 201-762-6500

Fax. 201-762-6670

Table of Contents

Safety Instructions ....................................................2

Thank You and Please Take a Moment ....................2

Technical Assistance and Customer Service ...........2

Table of Contents ......................................................3

Important, Connector and Cable Information ...........4

Dimensions ...............................................................5

Installation Overview ................................................5

Installation ............................................................ 5-9

Alignment .................................................................9

Specifications .........................................................10

Warranty ................................................................. 11

Important Information

CAUTION: The lenses contained in this product

are extremely delicate precision optics, and may be scratched or otherwise damaged by physical contact with external objects of any kind. It is therefore essential to avoid any such contact, or any other mistreatment of the lenses. Scratches or other externally caused damage to lenses that are deemed to have arisen through neglect or misuse, are excluded from protection under the Marantz Limited Warranty.

1. For additional connection information, refer to the owner’s manual(s) for any component(s)) connected to the LN7101F Anamorphic Lens System.

2. The LN7101F Anamorphic Lens System (Fixed Position) together with the Marantz VP-11 Projector will produce a full screen image when viewing Anamorphic Source Material. It is not intended to produce a full screen image when viewing non Anamorphic Source Material. The Marantz LN9101M Anamorphic Lens System (Two Position) will produce a full screen image with either source material. For additional information contact your Marantz Dealer or Marantz.

3. The LN7101F Anamorphic Lens is designed to produce the best possible images when a curved Anamorphic Projection Screen is used, contact your Marantz Dealer for additional information.

4. The Anamorphic Lens is a precision optical device with special coatings just like you would find on Professional Cameras. In the event the Lens requires cleaning to remove airborne particles such as dust and dirt from the Lens, use a safe cleaning product such as a clean and dry 3M

Brite

Microfiber Lens Cleaning Cloth. At no time should ordinary household cleaning products be used to clean the Lens, as damage will occur.

Scotch-

5. To protect the lens surfaces from accidental damage during the installation process DO NOT REMOVE THE LENS COVERS UNTIL INSTRUCTED.

6. The assembly and adjustment of the LN7101F/ EXT10/MT20 will require a Phillips head screw driver, adjustable wrench, 5/32 and 3/16 allen tools.

7. When the symbol illustrated here is located on the product or on the packaging, it indicates the product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the Marantz Dealer where you purchased the product.

+ 8 hidden pages