Marantz 541110331126M, BD5004 User Manual

BD5004

ENGLISH FRANÇAIS ESPAÑOL

The serial number of this product may be found on the back of the unit. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft.

Date of Purchase Dealer Purchase from Dealer Address Dealer Phone No. Model No. Serial No.

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to consti tute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

The important note and rating are located on the rear or bottom of the cabinet.

Laser Safety

CAUTION:

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

CAUTION:

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THIS PRODUCT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

FCC INFORMATION (For US customers)

1. PRODUCT

This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation.

2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by Marantz may void your authority, granted by the FCC, to use the product.

3. NOTE

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the product into an outlet on a circuit different from that to which the receiver is connected.

• Consult the local retailer authorized to distribute this type of product or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada.

Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LAFICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death.

CLASS 1

LASER PRODUCT

䡵 Copyrights / Droits d’auteur / Derechos de Autor

• It is prohibited by law to reproduce, broadcast, rent or play discs in public without the consent of the copyright holder.

• La reproduction, la diffusion, la location, le prêt ou la lecture publique de ces disques sont interdits sans le consentement du détenteur des droits d’auteur.

• De acuerdo con las leyes está prohibido reproducir, emitir, alquilar o interpretar discos en público sin la autorización del propietario de los derechos de autor.

䡵 Note on use / Observations relatives a l’utilisation / Notas sobre el uso

• Keep the apparatus free from moisture, water, and

•

Avoid high temperatures. Allow for sucient heat dispersion when installed in a rack.

• Eviter des températures élevées Tenir compte d’une dispersion de chaleur susante lors de l’installation sur une étagère.

• Evite altas temperaturas Permite la suciente dispersión del calor cuando está instalado en la consola.

dust.

• Protéger l’appareil contre l’humidité, l’eau et lapoussière.

• Mantenga el equipo libre de humedad, agua y polvo.

• Do not let foreign objects into the apparatus.

• Ne pas laisser des objets étrangers dans l’appareil.

• No deje objetos extraños dentro del equipo.

ESPAÑOL FRANÇAIS ENGLISH

• Handle the power cord carefully. Hold the plug when unplugging the cord.

• Manipuler le cordon d’alimentation avec précaution. Tenir la prise lors du débranchement du cordon.

• Maneje el cordón de energía con cuidado. Sostenga el enchufe cuando desconecte el cordón de energía.

• Unplug the power cord when not using the apparatus for long periods of time.

• Débrancher le cordon d’alimentation lorsque l’appareil n’est pas utilisé pendant de longues périodes.

• Desconecte el cordón de energía cuando no utilice el equipo por mucho tiempo.

* (For apparatuses with ventilation holes)

• Do not obstruct the ventilation holes.

• Ne pas obstruer les trous d’aération.

• No obstruya los oricios de ventilación.

• Do not let insecticides, benzene, and thinner come in contact with the apparatus.

• Ne pas mettre en contact des insecticides, du benzène et un diluant avec l’appareil.

• No permita el contacto de insecticidas, gasolina y diluyentes con el equipo.

• Never disassemble or modify the apparatus in any way.

• Ne jamais démonter ou modier l’appareil d’une manière ou d’une autre.

• Nunca desarme o modique el equipo de ninguna manera.

ENGLISH

Introduction Connections Playback Function Setup Others

Contents

Introduction

Important ..................................................................................2

Power Supply ............................................................................2

Warning .....................................................................................2

Installation Location ................................................................2

Cautions on Installation ...........................................................2

Cautions on Handling ..............................................................2

Dew Warning ............................................................................2

Avoid the Hazards of Electrical Shock and Fire .....................2

Before Using .............................................................................2

About Copyright .......................................................................2

Features ....................................................................................3

Supplied Accessories ...............................................................3

About Discs ...............................................................................3

Disc Handling ........................................................................................... 3

Cleaning Discs ......................................................................................... 3

Playable Discs and Files ....................................................................... 4

Unplayable Discs .................................................................................... 5

Color Systems ..........................................................................................5

Region Codes ........................................................................................... 5

Structure of Disc/SD Memory Card Contents .............................. 5

Symbols Used in this User Guide ...................................................... 5

About the Remote Control ......................................................6

Loading the Batteries ............................................................................ 6

Using a Remote Control ....................................................................... 6

Changing the Signal Code of a Remote Control ......................... 6

Part Names and Functions ....................................................... 7

Front Panel ............................................................................................... 7

Rear Panel ................................................................................................. 7

Remote Control ....................................................................................... 8

Front Panel Display ................................................................................ 9

Adjusting the Brightness of the Display ........................................ 9

Examples of Displays during Operation .......................................10

Connections

Connecting to a TV ...............................................................................12

Connecting to a Display Device with HDMI Cable ...................12

Connecting to a Display Device and an Amplifier/

Receiver with HDMI Cable ..............................................................12

HDMI Output Mode and Actual Output Signals ........................13

Audio Setting .........................................................................................13

Digital Connection to an AV Amplifier with Built-in

Decoder .................................................................................................14

Connection to a Device with 2-channels of Analog

Audio Inputs ........................................................................................15

Network Connection with LAN ........................................................15

Connecting the AC cord .....................................................................16

Playback

Turning the Power On ........................................................... 17

Direct Playback ...................................................................... 17

Operations Using Disc Menu, Title Menu, and

Popup Menu ......................................................................... 18

Playing Back a VR mode DVD-RW/-R ................................... 18

Pause ....................................................................................... 18

Resume Playback ................................................................... 18

Fast Forward / Fast Reverse Playback ..................................19

Slow Forward Playback .........................................................19

Step by Step Playback ...........................................................19

Dialog Speed ..........................................................................19

Repeat Playback ..................................................................... 20

A-B Repeat ...............................................................................................20

Program Playback .................................................................. 20

PIP (Picture in Picture) (BONUSVIEW) Setting .....................20

Random Playback ..................................................................21

Zoom .......................................................................................21

Camera Angle ......................................................................... 22

Search ..................................................................................... 22

On-Screen Display .................................................................. 23

Selecting the Format of Audio and Video ............................24

Selecting Audio Streams/Channels ............................................... 24

Selecting Subtitle Language ............................................................ 25

Virtual Surround ................................................................................... 25

Pure Direct Mode ................................................................................. 25

Setting the BD Audio Mode .............................................................25

Adjusting the Picture .......................................................................... 26

Playing Back an Audio CD or a Disc with DivX®/MP3/

Windows Media™ Audio/JPEG File ......................................26

Kodak Picture CD ................................................................................. 28

Reading the SD Memory Card ...............................................28

Enjoying BD-Live Discs with Internet ...................................29

Function Setup

Using the Setup Menu ....................................................................... 30

Quick ........................................................................................30

Custom ....................................................................................30

Network Connection ..............................................................39

Connection Test ................................................................................... 39

Enable(Easy) ........................................................................................... 39

Enable(Custom) .................................................................................... 39

Disable ..................................................................................................... 41

Network Update .....................................................................41

Initialize ..................................................................................42

Others

Trademark Information .........................................................43

Explanation of Terms .............................................................43

Index ........................................................................................46

Troubleshooting .....................................................................47

Language Code .......................................................................48

Specifications ..........................................................................49

ENGLISH

Introduction

Important

Use only discs marked with logos listed on page 4.

Power Supply

The main power supply is engaged when the main plug is plugged in a 120V, 60Hz AC outlet. To operate the unit, press

[POWER ON] or <POWER ON/STANDBY> to turn on the unit.

Warning

To avoid fire or electric shock, do not expose this unit to rain or moisture.

WARNING: LIVE PARTS INSIDE. DO NOT REMOVE ANY SCREWS.

Installation Location

For safety and optimum performance of this unit:

• Do not stand the unit up vertically. Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV.

• Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields.

• Be sure to remove a disc and unplug the AC cord from the outlet before carrying the unit.

Non-use periods - Turn off the unit when it is not in use. Unplug the unit from the household AC outlet if it is not to be used for a long time. Unplug the unit during lightning storms.

Please read this user guide carefully before using the unit, and keep it for future reference.

Cautions on Installation

Noise or disturbance of the picture may be generated if this unit or any other electronic equipment using microprocessors is used near a tuner or TV.

If this happens, take the following steps:

• Install this unit as far as possible from the tuner or TV.

• Set the antenna wires from the tuner or TV away from this unit’s AC cord and input/output connection cords.

• Noise or disturbance tends to occur particularly when using indoor antennas or 300Ω/ohms feeder wires. We recommend using outdoor antennas and 75Ω/ohms coaxial cables.

Note

• For heat dispersal, do not install this equipment in a

confined space such as a book case or similar unit.

10 cm or more

Wall

Cautions on Handling

●Cautions on using mobile phones.

Using a mobile phone near this unit may result in noise. If so, move the mobile phone away from this unit when it is in use.

●Before turning the power operation button on.

Check once again that all connections are correct and that there are no problems with the connection cables. Always set the power operation button to the standby position before connecting and disconnecting connection cables.

●Sufficiently ventilate the place of installation.

If the unit is left in a room full of the smoke from cigarettes, etc., for long periods of time, the surface of the optical pickup could get dirty, in which case it will not be able to read the signals properly.

Introduction Connections Playback Function Setup Others

Dew Warning

Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. Do not use the unit at least for 2 hours until its inside is dry.

Avoid the Hazards of Electrical Shock and Fire

• Do not handle the AC cord with wet hands.

• Do not pull on the AC cord when disconnecting it from AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on this unit, unplug the AC cord immediately and take the unit to our authorized service center for servicing.

Before Using

Pay attention to the following before using this unit:

●Moving the unit.

To prevent short-circuits or damaged wires in the connection cables, always unplug the power supply cord and disconnect the connection cables between all other audio components when moving the unit.

●Store the user guide in a safe place.

After reading the user guide, store it in a safe place as it could come in handy in the future.

●Whenever <POWER ON/STANDBY> is in the STANDBY state, the unit is still connected to AC line voltage.

Please be sure to unplug the cord when you leave home for, say, a vacation.

●Note that the illustrations in these instructions may differ from the actual unit for explanation purposes.

About Copyright

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.

Reverse engineering or disassembly is prohibited.

U. S. Patent No’s, 6,836,549; 6,381,747; 7,050,698; 6,516,132 and 5,583,936.

ENGLISH

Introduction Introduction

Features

Introduction Connections Playback Function Setup Others

●PIP (Picture in Picture) (BONUSVIEW) Setting

Some BD-Video have the PIP (picture-in-picture) function which enables you to display the secondary video in the primary video. You can call up the secondary video by pressing [MODE] whenever the scene contains the secondary video.

●Pure Direct

The sound quality of analog audio output is improved by stop output of video signals, etc.

●On-Screen Display

Information about the current operation can be displayed on a screen, allowing you to confirm the currently active functions (such as program playback) using the remote control.

●Picture Control

Picture control adjusts the picture quality of the specific display.

●DRC (Dynamic Range Control)

Use this procedure to set the dynamic range of the output signals when playing back BD/DVD/AVCHD recorded in Dolby Digital/Dolby Digital Plus/Dolby TrueHD.

●BD-Live

BD-Live (BD-ROM version 2 Profile 2.0) that allows interactive functions to be used when this unit is connected to the Internet in addition to the BONUSVIEW function. The various functions differ depending on the disc.

●x.v.Color

This unit supports playback of video contents on discs recorded with “x.v.Color” technology. To watch this video content with the “x.v.Color” space, a TV or other display device supporting both video image reproduction using “x.v.Color” standard and capability of manual switching of its color space setting is required. Please refer to the user guide of your display device for further information.

Supplied Accessories

Please check to make sure the following items are included with the main unit in the carton.

remote control (RC004BD) “AA” (R6) batteries x2

About Discs

Disc Handling

• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

• Always store the disc in its protective case when it is not used.

• Note that discs with special shapes cannot be played on this product. Do not attempt to play back such discs, as they may damage the unit.

Cleaning Discs

• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.

• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.

●Playing Back the Contents in SD Memory Card

• You can playback AVCHD, MP3, Windows Media™ Audio, or JPEG stored in an SD Memory Card.

• You can store picture-in-picture commentary, subtitles or other extras for BD-ROM ver. 2 (Profile 2.0/ Profile 1.1) files in an SD Memory Card and playback with the BD-ROM.

AC cord (5.2ft/1.6m) user guide

●Playing Back AVCHD Files

This unit supports playback of AVCHD format files (new format for high definition video camcorders) recorded on disc/SD card. Your high definition personal archive is playable in HD quality.

●Playing Back DivX

You can enjoy DivX® files which are recorded on BD-RE/-R, DVD-RW/-R or CD-RW/-R.

• Official DivX

• Plays all versions of DivX

File

Certified product

video (including DivX® 6/DivX®HD)

warranty card RCA audio cable (3.2ft/1.0m)

with standard playback of DivX® media files.

●Playing Back an MP3 File

You can enjoy MP3 files which are recorded on BD-RE/-R, DVD-RW/-R, CD-RW/-R or SD Memory Card.

●Playing Back Windows Media™ Audio File

You can enjoy Windows Media™ Audio files which are recorded

RCA video cable (3.2ft/1.0m)

on BD-RE/-R, DVD-RW/-R, CD-RW/-R or SD Memory Card.

●Displaying a JPEG picture

Kodak Picture CD can be played back. Still images stored in JPEG format on BD-RE/-R, DVD-RW/-R, CD-RW/-R or SD Memory Card can also be played back.

●BD-J Application

• With some BD that supports Java applications (BD-J), you can enjoy interactive function (e.g. game).

ENGLISH

Introduction Introduction

Playable Discs and Files

This unit is compatible to play back the following discs. To play back a BD or DVD, make sure that it meets the requirements for region codes and color systems as described on page 5. You can play back discs that have the following logos on the disc. Other disc types are not guaranteed to play back.

Playable discs Logos

Blu-ray Disc

-BD-Video

- BD-RE (ver.2.1) (Recorded in BDMV format)

- BD-R (ver.1.1/1.2/1.3) (Recorded in BDMV format) (Unclosed discs may not be played back.)

DVD-Video

DVD-RW (Finalized discs only)

DVD-R DVD-R DL

CD-DA (audio CD)

CD-RW

CD-R

Kodak Picture CD

DTS-CD (5.1 Music Disc)

(Finalized discs only)

—

Playable files Logos Media

DVD-RW/-R SD Memory Card

AVCHD

(including SDHC) miniSD Card microSD Card

BD-RE/-R DVD-RW/-R

DivX

CD-RW/-R

MP3

—

BD-RE/-R DVD-RW/-R

Windows Media™ Audio

CD-RW/-R SD Memory Card (including SDHC) miniSD Card

JPEG

—

microSD Card

Note

• ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official Divx Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.

• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.

• Discs containing the DivX® files with the DivX®GMC (Global Motion Compensation) playback feature, which is DivX supplemental function, cannot be played back on this unit.

• This unit cannot play back the disc contents protected by Windows Media™ Digital Rights Management (DRM).

• “WMA” (Windows Media™ Audio) is an audio codec developed by Microsoft® in the United States of America.

device

Readable cards Playable files / data

SD Memory Card (8MB - 2GB) AVCHD, MP3, Windows Media™ SDHC Memory Card (4GB - 8GB) miniSD Card (8MB - 2GB)

microSD Card (8MB - 2GB)

Audio, JPEG, Picture-in-picture commentary, subtitles or other extras for BD-ROM ver. 2 (Profile

2.0/ Profile 1.1)

Note for SD Memory Cards

• Do not remove the SD Memory Card or turn the unit to the standby mode while the contents of the card is in playback. It may result in malfunction or loss of the card’s data.

• Please keep the SD Memory Cards in their cases when you are not using them.

• Do not try to open or modify the card.

• Do not touch the terminal surface with your fingers or any metals.

• Do not attach additional labels or stickers to cards.

• Do not remove the label of the SD Memory Cards.

• This unit supports SD Memory Card with FAT12/FAT16 file system, and SDHC Memory Card with FAT32 file system.

• This unit may not read the SD Memory Cards formatted on computer. If that is the case, please reformat the SD Memory Cards on this unit and try again.

• This unit does not support mini SDHC and micro SDHC Memory Card.

• For miniSD Card and microSD Card adapter is necessary.

miniSD Card Adapter

miniSD Card

• Portions of this product are protected under copyright law and are provided under license by ARIS/SOLANA/4C.

microSD Card Adapter

microSD Card

Introduction Connections Playback Function Setup Others

ENGLISH

Introduction Introduction

Introduction Connections Playback Function Setup Others

The following discs will not play back on this unit.

BD and DVD are recorded in different color systems throughout the world. The most common color system is NTSC (which is used primarily in the United States and Canada).

This unit uses NTSC, so BD or DVD you play back must be recorded in the NTSC system. You cannot play back BD or DVD recorded in other color systems.

Unplayable Discs

• BD-RE (ver.1.0) (BD-disc with cartridge)

• BD-RE (ver.2.1) (Recorded in BDAV format)

• BD-R (ver.1.1/1.2/1.3) (Recorded in BDAV format)

• BD that contains AVCHD files

• Multi-session burn BD/DVD with DivX

files

• Multi-session burn BD-RE/-R with MP3/Windows Media™ Audio/ JPEG files

• BD/DVD hybrid disc (e.g. Total Hi Def hybrid disc)

•BD-Video that does not include “A” on its region code.

• DVD-Video that does not include either “1” nor “ALL” on its region code.

• DVD-ROM/RAM (For DVD-ROM discs, data files in DivX

3.11, 4.x,

5.x and 6.x can be played)

• DVD-RW/-R recorded in non-compatible recording format

• CD-ROM (Data files in DivX

3.11, 4.x, 5.x and 6.x can be played)

• CDV (Only the audio part can be played)

• CD-G (Only the audio signals can be output)

• Compact Disc-Interactive (CD-I)

• Video Single Disc (VSD)

• Video CD, Super Video CD

• Super audio CD (Only the sound on the CD layer can be heard. The sound on the high-density super audio CD layer cannot be heard.)

•DVD-Audio

•HD DVD

• Disc with recording area less than 55mm in diameter

• Unauthorized disc (Pirated disc)

• Unfinalized disc

Color Systems

Region Codes

This unit has been designed to play back BD with region A and DVD-Video with region 1. You cannot play back BD or DVD-Video that are labeled for other regions. Look for the symbols on the right on your BD or DVD-Video. If these region symbols do not appear on your BD or DVD-Video, you cannot play back the disc in this unit. The letter or number inside the globe refers to region of the world. A BD or DVD-Video labeled for a specific region can only play back on the unit with the same region code.

BD-Video

DVD-Video

Structure of Disc/SD Memory Card Contents

The contents of disc are generally divided into titles. Titles may be further subdivided into chapters.

BD/DVD/AVCHD

title 1 title 2

chapter 1 chapter 2 chapter 1 chapter 2 chapter 3

Audio CDs are divided into tracks.

track 1 track 2 track 3 track 4 track 5

Data discs or SD Memory Cards containing DivX® (in discs only)/ MP3/Windows Media™ Audio/JPEG are divided into folders, and the folders are subdivided into files.

DivX®/MP3/Windows Media™ Audio/JPEG

folder (group) 1 folder (group) 2

group(folder)1 group(folder)2

file (track) 1 file (track) 2 file (track) 3 file (track) 4 file (track) 5

Audio CD

audio CD

MP3, WMA, JPEG, DivX®

Symbols Used in this User Guide

To specify for which media type each function is, we put the following symbols at the beginning of each item to operate.

Symbol Description

BD-V

DVD-V

DVD-VR

AVCHD

DivX

MP3

WMA

JPEG

If you do not find any of the symbols listed above under the function heading, the operation is applicable to all media.

Button name only:

Description refers to BD-Video and BD-RE (ver. 2.1)/ BD-R (ver.1.1/1.2/1.3) recorded in BDMV format

Description refers to DVD-Video and DVD-RW/-R recorded in video mode

Description refers to DVD-RW/-R recorded in VR mode

Description refers to audio CD and DTS-CD

Description refers to DVD-RW/-R and SD Card with AVCHD files

Description refers to BD-RE/-R, DVD-RW/-R and

CD-RW/-R with DivX

files

Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R and SD Memory Card with MP3 files

Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R and SD Memory Card with Windows Media™ Audio files

Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R and SD Memory Card with JPEG files

About the button names in this explanation

< > : Buttons on the main unit [ ] : Buttons on the remote control

Buttons on the main unit and remote control

ENGLISH

Introduction Introduction

About the Remote Control

Loading the Batteries

Using a Remote Control

Keep in mind the following when using the remote control:

• Make sure that there are no obstacles between the remote control and infrared sensor window on the unit.

A Open the battery

compartment cover.

B Insert two “AA” (R6)

batteries, with each one oriented correctly.

• Remote operation may become unreliable if strong sunlight or fluorescent light is shining on infrared sensor window of the unit.

• Remote control for different devices can interfere with each other. Avoid using remote control for other equipment located close to the unit.

• Replace the batteries when you notice a fall off in the operating

• At this point the new signal code of the unit is effective. Please change the signal code of the remote control to match to the signal code of the unit with following procedure.

䡵 Change the signal code of the remote control

Set to “BD1”:

Press and hold down both C and [1] on the remote control for at least five seconds.

Set to “BD2”:

Press and hold down both C and [2] on the remote control for at least five seconds.

range of the remote control.

• The maximum operable ranges from the unit are as follows.

- Line of sight: approx. 16 feet (5m)

- Either side of the center: approx. 16 feet (5m) within 30°

C Close the cover.

• If the signal code does not match, the signal code of the remote control will be displayed on the front panel display.

• The default setting and the setting after you change the batteries is “BD1”.

• If the code setting on the unit is “BD1”, and the setting on the remote control is “BD2”, “BD2” is shown on the front panel display.

Cautions on Batteries

• Use “AA” (R6) batteries in this remote control.

• Replace the batteries with new ones approximately once a year, though this depends on the frequency with which the remote control is used.

• If the remote control does not operate within a close proximity of the main unit, replace the batteries with new ones, even if less than a year has passed.

• The included batteries serve only for verifying operation. Replace them with new batteries as soon as possible.

• When inserting the batteries, be careful to do so in the proper direction, following the and marks in the remote control’s battery compartment.

• To prevent damage or battery fluid leakage:

- Do not mix a new battery with an old one.

- Do not mix two different types of batteries such as alkaline

and manganese.

- Do not short-circuit, disassemble, heat or dispose of

batteries in flames.

• Remove the batteries when not planning to use the remote control for a long period of time.

• If the batteries should leak, carefully wipe off the fluid from the inside of the battery compartment, then insert new batteries.

16 feet (5m) 30° 16 feet (5m) 16 feet (5m) 30°

Changing the Signal Code of a Remote Control

To avoid the other Marantz’s BD players responding the remote signal of this unit, you can change the signal code of the remote control. If the signal code of the remote control does not match to the signal code of the unit, you cannot control the unit with the remote control.

䡵 Change the signal code of the unit

1) In stop mode, press [SETUP].

2) Use [Y / Z] to select , then press [ENTER].

3) Use [Y / Z] to select , then press [ENTER].

4) Use [U / V] to select “Remote Control Setting”.

5) Press [ENTER] to select “BD1” or “BD2”.

30°30°

Others

Remote Control Setting BD1 HDMI CEC On Media Select Disc Network Connection Enable(Easy) Network Update

T Button illustrations used in this manual for operation

explanation are for the Remote Control Unit. You can operate the unit using the button of the same name on the front panel of the unit.

Introduction Connections Playback Function Setup Others

6) Press [SETUP] to exit.

ENGLISH

Introduction Introduction

Introduction Connections Playback Function Setup Others

Part Names and Functions

Front Panel

910111287

The unit can also be turned on by pressing the buttons with circled numbers.

1. STANDBY indicator

This indicator lights up in red in standby mode and turns off when the power is on.

2. POWER ON/STANDBY button

Press to turn on the unit, or to turn the unit to the standby mode. (In standby mode, this unit still consumes small amount of power. To completely shut down the unit, you must unplug the AC cord.)

3. HDMI RESOLUTION button

Press to set the HDMI jack’s video signal

8. A (OPEN/CLOSE) button

Press to open or close the disc tray.

9. Disc tray

Place a disc when opening the disc tray.

10. B (PLAY) button

Press to start or resume playback.

11. C (STOP) button

Press to stop playback.

12. F (STILL/PAUSE) button

Press to pause playback.

output mode.

4. Infrared sensor window

Receives signals from your remote control so that you can control the unit from a distance.

5. Display

Refer to “Front Panel Display” on page 9.

6. SD card slot

Insert an SD Memory Card, and play back the contents in it.

7. H / G (SKIP DOWN/UP) button

Press to skip down/up titles/chapters/tracks/ files.

Rear Panel

AC IN

NETWORK

1. AC IN Terminal

Use to connect the AC cord to supply the power.

2. DIGITAL OUT (COAXIAL) jack

Use digital audio coaxial cable to connect to an AV receiver, Dolby Digital decoder or other device with a digital audio coaxial input jack.

3. COMPONENT VIDEO OUT jacks

Use a component video cable to connect to a display device with component input jacks.

4. VIDEO OUT jack

Use an RCA video cable to connect to a TV monitor, AV receiver or other device.

5. FLASHER IN / OUT jacks

This Input terminal is equipped for controlling this unit by the external Infrared (IR) control device. Connect the IR control signal from a Keypad, IR repeater, etc. The Output terminal repeats the IR signal which was fed into the IR Flasher Input terminal for another device.

2 3 41 5

DIGITAL OUT

COMPONENT VIDEO OUT

COAXIAL

HDMI OUT

VIDEO OUT

6. 2ch AUDIO OUT jacks

Use an RCA audio cable to connect these jacks to the 2-channel audio input jacks of your amplifier with 2- channel input terminals.

7. NETWORK Terminal

Use to connect a telecommunications equipment with LAN cable.

8. HDMI OUT jack

Use an HDMI cable to connect to a display with an HDMI input jack.

Note

• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

FLASHER IN

OUT

2ch AUDIO OUT

ENGLISH

Introduction Introduction

Remote Control

The unit can also be turned on by pressing the buttons with circled numbers.

1. POWER ON button

• Press to turn the unit on.

2. POWER OFF button

• Press to turn the unit to standby mode.

3. A-B REPEAT button

• Press to mark a segment between A and B for A-B repeat playback.

4. REPEAT button

• Press to select the repeat mode.

5. RANDOM button

• Press to display the random playback screen for shuffling the playback order of tracks/files.

6. ZOOM button

• During playback, press to enlarge the picture on the screen.

7. CLEAR button

• Press to clear the information once entered, to clear the marker settings, or to cancel the programming for CD, etc.

8. RED/GRN/BLU/YEL button

• Press to select item on some BD menus.

• When file list / thumbnail list is shown, press to switch between pages.

9. TOP MENU button

• Press to display the top menu.

10. Cursor U / V / Y / Z buttons

• Press to select items or settings.

11. ENTER button

• Press to confirm or select menu items.

12. SETUP button

• Press to display the setup menu.

13. SUBTITLE button

• Press to display the subtitle menu.

14. ANGLE button

• Press to access various camera angles on the disc.

• Press to rotate the JPEG/Kodak Picture images clockwise by 90 degrees.

15. PURE DIRECT button

• Press to stop output of video signals, etc., and output only the analog audio signals to achieve high quality sound from analog audio outputs.

16. DISPLAY button

• Press to display the On-Screen display menu.

17. SKIP H button

• During playback, press to return to the beginning of the current title, chapter, track or file.

18. SKIP G button

• During playback, press to skip the next chapter, track or file.

19. STOP C button

• Press to stop playback.

• Press to exit from the title menu.

20. REW h button

• During playback, press to fast reverse the playback.

21. HDMI RESOLUTION button

• Press to set the HDMI jack’s video signal output mode.

22. INPUT U / V buttons

• These buttons are used to switch the input when using one of the supported Marantz amplifiers. However, this function may not work with some of the older models.

23. VOLUME +/– buttons

• This button can be used to adjust the volume of devices compatible with Marantz amplifiers that come with a remote controller.

24. STILL/PAUSE F button

• Press to pause playback.

• When playback is in pause, press repeatedly to forward the playback step by step.

25. FFW g button

• During playback, press to fast forward the playback.

• When playback is in pause, press to slow forward the playback.

26. PLAY B button

• Press to start playback or resume playback.

27. MODE button

• During playback, press to display the picture adjustment menu, and dialog speed.

• During the JPEG playback, press to display menus for changing the visual effect for switching the image or changing the size of the image.

• In stop mode with BD inserted, press to display a menu for setting the BD audio mode.

• During playback of BD, DVD, audio CD, AVCHD, DivX or Windows Media™ Audio, press to display a menu for setting the virtual surround.

• During BD playback, press to turn the picture-in-picture feature on or off (only applicable to BD-Video which supports the PIP (BONUSVIEW) function).

• In stop mode with audio CD, or disc with MP3, Windows Media™ Audio, JPEG files inserted, press to display menus for program and random playback.

28. AUDIO button

• Press to display the audio menu.

29. RETURN button

• Press to return to the previously displayed menu screen.

, MP3

Introduction Connections Playback Function Setup Others

ENGLISH

Introduction Introduction

30. POP UP MENU / MENU button

Introduction Connections Playback Function Setup Others

31. SEARCH MODE button

32. Number buttons

33. OPEN/CLOSE A button

34. DIMMER button

• Press to display the pop-up menu/disc menu/file list.

• Press to change “Original” and “Playlist” on the TV screen.

• Press to display the search menu.

• Press to enter the title/chapter/track/file numbers.

• Press to open or close the disc tray.

• Press to adjust the brightness of the front panel display.

Front Panel Display

1 2

Note

• [ZOOM] is not available for BD and AVCHD.

• [RANDOM] is not available for BD, DVD, AVCHD and DivX

* Brightness of the display can be adjusted. Refer to “Panel Display” in “Function Setup” on page 37.

1) Displays playback status icon. Refer to the table below.

2) Displays various kinds of information such as title number, elapsed time, repeat mode, etc.

Playback status icon

Disc SD Memory Card

Playback is in progress

Stop mode

Pause mode

Fast forward mode

Fast reverse mode

Slow forward mode

(for AVCHD only)

Appears while repeat function is set

Mode

Adjusting the Brightness of the Display

You can adjust the brightness of the display by the pressing [DIMMER] repeatedly. The brightness changes as bright A dimmer A auto each time you press [DIMMER]. If you select auto, the display gets dimmer during playback.

Note

• [DIMMER] is not available when the setup menu is displayed.

ENGLISH

Introduction Introduction

Examples of Displays during Operation

Display Description

Power on

Standby mode

Tray open

Tray is closing

Loading the disc

No disc inserted

This unit cannot read the disc or SD Memory Card inserted.

Stop mode

HDMI output mode (480i) is selected.

HDMI output mode (480p) is selected.

HDMI output mode (720p) is selected.

HDMI output mode (1080i) is selected.

HDMI output mode (1080p) is selected.

Introduction Connections Playback Function Setup Others

HDMI output mode (1080p24 frame) is selected.

HDMI output mode (Source Direct) is selected.

Pure direct mode is set to pure direct off.

Pure direct mode is set to video signal off.

Pure direct mode is set to front panel display off.

Pure direct mode is set to video signal and front panel display off.

Appears when the connected display device or other device does not support HDCP.

Note

• When playing back the disc that contains more than 100 titles, display of the chapter and time on the front panel display will be moved a few dots to the right.

ENGLISH

Introduction Connections Playback Function Setup Others

Connect the BD5004 as follows before using. Make connections according to the equipment you are connecting. Some BD5004 settings may be necessary depending on the connection method. Check each connection item for more information.

Connections

Home theater playback

- Playing back using multi-channel system

BD5004

Multi-channel Audio + Video

• HDMI connection

“Connecting to a Display Device and an Amplifier/ Receiver with HDMI Cable” (page 12)

Multi-channel Audio

• Digital audio connection

“Digital Connection to an AV Amplifier with Built-in Decoder” (page 14)

Video

•Connecting to a TV (VIDEO OUT/COMPONENT VIDEO OUT)

: page 12

Playing back with a direct connection to a TV

BD5004

Audio + Video

• Connecting to a Display Device with HDMI Cable

Audio

• Connecting to a TV (2ch AUDIO OUT) : page 12

Video

•Connecting to a TV (VIDEO OUT/COMPONENT VIDEO OUT)

Playing back 2-channel audio

BD5004

: page 12

Using BD-Live function or updating the software version of BD5004

• NETWORK connection

“Network Connection with LAN” (page 15)

• Connecting the AC cord : page 16

BD5004

• 2ch audio connection

“Connection to a Device with 2-channels of Analog Audio Inputs” (page 15)

ENGLISH

Connections

Connecting to a TV

Make one of the following connections, depending on the capabilities of your existing device.

Method 1 Method 2

analog audio

display device

AUDIO IN

RCA

audio

cable

and or

this unit

LASHER

OUT

2ch AUDIO OUT

2ch AUDIO OUT VIDEO OUT

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

• RCA video cable x 1 Please purchase the rest of the necessary cables at your local store.

standard picture

VIDEO

RCA video cable

VIDEO OUT

better picture

COMPONENT

VIDEO IN

(Green)

B/CB

(Blue)

PR/C

(Red)

component video cable

(Red) (Blue) (Green)

COMPONENT VIDEO OUT

PB/C

COMPONENT VIDEO OUT

Connections

Connecting to a Display Device with HDMI Cable

Connecting this unit to device with an HDMI jack using an HDMI cable enables digital transfer of both digital video signals and multi-channel audio signals. After making the connection, please make HDMI settings on setup menu according to your display device. Refer to pages 31-33.

this unit

NETWORK

HDMI cable

DIGITAL OUT

COAXIAL

COMPONENT VI

HDMI OUT

best audio and picture

A display device with an HDMI compatible port

Method 3

display device

AC IN

To HDMI Input jack

Cables not included.

Please purchase the necessary cables at your local store. Use a cable on which the HDMI logo is indicated (a certified HDMI product) for connection to the

HDMI connector. Normal playback may not be possible when using a cable other than one on which the HDMI logo is indicated (a non-HDMI-certified product).

Connecting to a Display Device and an Amplifier/Receiver with HDMI Cable

Connecting this unit to display device and an amplifier/receiver with an HDMI jack using HDMI cables enables digital surround sound with high quality video.

Front Speaker (left)

Center

Speaker

Front Speaker (right)

Introduction Connections Playback Function Setup Others

Note

• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy protection system.

display device

HDMI IN HDMI OUT

amplifier

HDMI IN

this unit

DIGITAL OUT

AC IN

COMPONENT VI

COAXIAL

NETWORK

HDMI OUT

• If the display device to which the player is to be connected is compatible with progressive scan video, connect to the component video input.

• This unit’s COMPONENT VIDEO OUT jacks are compatible for 480i/480p/720p/1080i video resolution. If the connected display device is not compatible for 480p/720p/1080i video resolution, set “Component Output” to “480i”.

• If the picture is not output properly to the display device because of the “HDMI Video Resolution” or “Component Output” setting, press and hold B on the front panel for more than 5 seconds. The “HDMI Video Resolution” setting will be reset to the default automatically.

• If you are using HDMI connection and set “HDMI Video Resolution” to “Source Direct”, “1080p” or “1080p24”, picture may not be output properly to the display device. In that case, set “HDMI Video Resolution” to “480i”, “480p”, “720p” or “1080i”.

Surround Speaker (left) Surround Speaker (right)

HDMI cable

Surround back (For

7.1-channel) (left)

Surround back (For

7.1-channel) (right)

HDMI cable

Subwoofer

Cables not included.

Please purchase the necessary cables at your local store.

ENGLISH

Connections Connections

Introduction Connections Playback Function Setup Others

Press [HDMI RESOLUTION] to select the HDMI output mode. HDMI video resolution changes as following.

HDMI Output Mode and Actual Output Signals

Front Panel Display HDMI Video Resolution

480 Interlaced

Press [HDMI RESOLUTION]

480 Progressive

Press [HDMI RESOLUTION]

720 Progressive

Press [HDMI RESOLUTION]

1080 Interlaced

Press [HDMI RESOLUTION]

1080 Progressive

Press [HDMI RESOLUTION]

1080 Progressive 24 frame

Press [HDMI RESOLUTION]

Source Direct

Press [HDMI RESOLUTION]

Note

• You can change the HDMI output mode with [HDMI RESOLUTION] during playback as well. (This

is not available during BD/AVCHD playback.)

• Video and audio signals may be distorted temporarily when switching to/from the HDMI output mode.

• You can also change the HDMI output mode from “HDMI Video Resolution” in the “Video” menu on the setup menu. Refer to page 32.

• In order to get natural and high quality film reproduction of 24-frame film material, use HDMI cable (High Speed HDMI cable is recommended) and select “1080p24”, “Auto” or “Source Direct” if the connected display device is compatible with 1080p24 frame input.

• For AVCHD and DivX device is compatible with 1080p24 frame input and “HDMI Video Resolution” is set to “1080p24”, “Auto” or “Sou rce Direct ”.

• When “HDMI Video Resolution” is set to “1080p”, “1080p24” or “Source Direct”, the “Component Output” will be set to “480i” automatically.

• If the video is not properly from HDMI OUT jack after you set the “HDMI Video Resolution” setting, change the HDMI video resolution to the compatible resolution by pressing [HDMI RESOLUTION] or press and hold B on the front panel for more than 5 seconds to reset the setting.

• “HDMI Deep Color” is available only when the display device is connected by HDMI cable and supports HDMI Deep Color.

• For “Auto” in “HDMI Deep Color”, using the High Speed HDMI cable is recommended.

, 24-frame film material will be output as 60 frame, even if the connected

Audio Setting

When using HDMI connections make the “HDMI Audio Out” settings in the “Audio” menu on the setup menu according to the specifications of the device or monitor to be connected.

Device to be connected “HDMI Audio Out” setting Output HDMI audio signal

Device compatible with DTS, DTS-HD, Dolby Digital, Dolby Digital Plus or Dolby TrueHD decoding

HDMI Multi(Normal) Dolby Digital, Dolby Digital Plus,

Dolby TrueHD, DTS, or DTS-HD bitstream are output from HDMI OUT. Make the speaker settings on the connected AV amplifier, etc.

Device compatible with 3 or more channels of audio inputs (not DTS, DTS-HD, Dolby Digital, Dolby Digital Plus or Dolby TrueHD compatible)

HDMI Multi(LPCM) Multi-channel audio signals are

output from the HDMI OUT. Make the speaker settings with the speaker setting items appear after you select “HDMI Multi(LPCM)”. Refer to page 33.

Device compatible with 2-channel audio input or device not compatible with audio input

HDMI connection to a display device, and digital audio connection (coaxial) to an AV amplifier.

HDMI 2ch Down-mixed 2-channel audio

signals are output from HDMI OUT.

Audio Mute HDMI audio will be muted, and

Dolby Digital/DTS bitstream or PCM will be output from DIGITAL OUT depending on the “Digital Out” setting. Refer to page 14.

䡵 Audio signals output from HDMI OUT

Disc type Audio recording

format

HDMI Multi(Normal) HDMI Multi(LPCM) HDMI 2ch

Dolby Digital Dolby Digital Multi PCM 2ch Downmix PCM

BD-Video

Dolby Digital Plus

Dolby TrueHD

DTS DTS Multi PCM 2ch Downmix PCM DTS-HD

Dolby Digital Plus*

Dolby TrueHD*

DTS-HD*

PCM Multi PCM Multi PCM 2ch Downmix PCM Dolby Digital Dolby Digital Multi PCM 2ch Downmix PCM

DVD-Video

DTS DTS Multi PCM 2ch Downmix PCM PCM 2ch PCM 2ch PCM 2ch PCM

DTS-CD DTS Multi PCM 2ch Downmix PCM

AVCHD

DivX

audio CD/ MP3/ Windows

Dolby Digital Dolby Digital Multi PCM 2ch Downmix PCM PCM Multi PCM Multi PCM 2ch Downmix PCM Dolby Digital Dolby Digital Multi PCM 2ch Downmix PCM MP3/ MP2 2ch PCM 2ch PCM 2ch PCM

2ch PCM 2ch PCM 2ch PCM

Media™ Audio

“HDMI Audio Out” setting

Multi PCM*

2ch Downmix PCM*

ENGLISH

+ 37 hidden pages