Malekko Manther GRowl Instruction Manual

MANTHER GROWL

MANUAL V.1

www.malekkoheavyindustry.com

814 SE 14TH AVENUE
PORTLAND OR 97214

USA

MANTHER GROWL MANUAL V.1

TABLE OF CONTENTS

SPECIFICATIONS 1
INSTALLATION 2
DESCRIPTION 3
GETTING STARTED 4
OSCILLATOR 5
LFO 6
VCA 7
FILTER 8
EXAMPLE PATCH 9
WARRANTY 10

MANTHER GROWL MANUAL V.1

SPECIFICATIONS

FORMAT:
EURORACK

DIMENSIONS:
26HP, 34mm deep

INTERNAL AND EXTERNAL SIGNALS (3.5mm jacks):
0-5V Logic I/O

MAX CURRENT:
+12V: 300mA

-12V: 200mA
+5V: n/a

PG. 1

MANTHER GROWL MANUAL V.1

INSTALLATION

Remove module from packaging.

Power down your modular synthesizer and disconnect the power cable from
the wall outlet.

Attach the included power cable to the module’s power connector and connect
the other end to the power distribution bus in your EuroRack synthesizer case.

Position the module on the mounting rails in your EuroRack case and screw
down mounting screws. Power up! If your case does not turn on properly then
you have installed the module incorrectly. Simply power down and make sure
to follow the diagram when reconnecting the module.

PG. 2