Magellan Navigation, Inc. 960 Overland Court, San Dimas, CA 91773
IMPORTANT SAFETY WARNINGS
The Magellan RoadMate is a vehicle-navigation aid designed to assist you in arriving to your selected destinations. When
using the Magellan RoadMate, these safety rules must be followed to prevent accidents that can result in injury or death to
yourself or others:
•California and Minnesota law prohibits mounting any item to your windshield. Please check with your state or local law
enforcement for applicable regulations regarding windshield mounting. Go to www.magellanGPS.com for alternate
mounting solutions. An adhesive disk is supplied with the Magellan RoadMate for use as an alternate mounting solution
to the dashboard.
•When driving, the need to view the display is minimal. The driver should enter data or program the Magellan RoadMate
only when the vehicle is stopped. Only a vehicle passenger should enter data or program the Magellan RoadMate while
the vehicle is moving.
•It is your responsibility to comply with all traffic laws.
•Every attempt is made to ensure that the database is accurate. However, roadways, points of interest (POIs), and
business and service locations may change over time. The database does not include, analyze, process, consider, or
reflect any of the following: legal restrictions (such as vehicular type, weight, height, width, load and speed restrictions);
road slope or grade; bridge height, width, weight, or other limits; population density; neighborhood quality or safety;
availability or proximity of law enforcement, emergency rescue, medical, or other assistance; construction work zones or
hazards; road or lane closures; road, traffic, or traffic facilities’ safety or condition; weather conditions; pavement
characteristics or conditions; special events; traffic congestion. It is your responsibility to disregard any unsafe,
hazardous, or illegal route suggestions.
•Keep the Magellan RoadMate safe from extreme temperature conditions. For example, do not leave it exposed to direct
sunlight for an extended period of time.
•Take care when mounting the Magellan RoadMate in your vehicle, whether using the windshield mount or other
mounting accessories, that it does not obstruct the driver's view of the road, interfere with the operation of the vehicle's
safety devices such as air bags, or present a hazard to occupants of the vehicle should the Magellan RoadMate be
dislodged while driving. You assume the risks associated with damage to your vehicle or vehicle occupants as the result
of your choices in mounting the Magellan RoadMate.
•The battery in the Magellan RoadMate is rechargeable and should not be removed. In the event it should need to be
replaced, please contact Magellan Technical Support.
About Charging the Magellan RoadMate
•An optional AC adapter is available as an accessory for your Magellan RoadMate. Use of another type of AC adapter can
result in malfunction and/or possible fire hazard due to battery over heating.
•Use only the vehicle power cable approved for / supplied with your Magellan RoadMate. Use of another type of vehicle
power cable will result in malfunction and/or damage to the receiver.
•For safety reasons, the battery in your Magellan RoadMate will stop charging when the ambient temperature is less than
32°F (0°C) or more than 113°F (45°C).
•It will take approximately 6 hours of charging the Magellan RoadMate through the vehicle power adapter or optional AC
adapter to obtain a full battery charge.
About the Battery
•Do not attempt to replace the battery. Please contact Magellan Technical Support for issues related to the battery.
•Use only the charger approved for your Magellan RoadMate.
i
IMPORTANT SAFETY WARNINGS
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
•-Reorient or relocate the receiving antenna.
•-Increase the separation between the equipment and receiver.
•-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with
non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is
cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's
authority to operate this equipment.
The Magellan RoadMate must be installed and operated at a distance no closer then 8 inches (20 cm) from the user.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numerique de la classe B respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada.
ii
IMPORTANT SAFETY WARNINGS
IC statement
Operation is subject to the following two conditions:
1.This device may not cause interference and
2.This device must accept any interference, including interference that may cause undesired operation of the
device.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow
the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The information provided in this document is subject to change without notice. Improvements and enhancements to the
product may occur without any formal notification. Check the Magellan website (www.magellanGPS) for product updates
and additional information.
Using the Simulator ......................................................................................... 50
Setting Tone Options ....................................................................................... 51
Setting Text-To-Speech Use .............................................................................. 51
Viewing Technical GPS Information ................................................................... 51
Setting the GPS Position .................................................................................. 52
Backing Up and Restoring Data ........................................................................ 52
Backing Up Data ............................................................................................. 52
Restoring Data ................................................................................................ 52
Viewing Map Information .................................................................................. 53
Table of ContentsMagellan RoadMate 14124
Magellan RoadMate 1412
The Magellan RoadMate 1412 is a vehicle navigation product that utilizes GPS signals from satellites
to calculate your precise location and compute details about its travel. Knowing its position and
®
movement, it can then overlay this information on detailed maps provided by NAVTEQ
visual representation of your location.
With the Magellan RoadMate 1412 you can:
•Store your home address and quickly get routing details to your home.
•Create and save addresses in your address book that can be accessed at any time and get
routing information to that address.
•Route to an address that you enter using the keypad and Magellan’s QuickSpell feature for
easy, errorless address entry.
•Route to any point of interest (POI) that has been preloaded into your Magellan RoadMate.
•Route to a POI that appears on the map while traveling simply by tapping on the POI icon.
•Route to an intersection by selecting the intersecting streets.
•Create a trip with multiple destinations using the trip planner. Handy for business people
who need routing information to many destinations.
to provide a
•View POIs that are ahead of you on the freeway. The exit POI function provides you with a
list of gas stations, restaurants, hotels and auto repair shops located nearby exits you are
approaching while traveling on a freeway.
•Customize your Magellan RoadMate to meet your needs using the User Options menu.
The interface for the Magellan RoadMate is easy and simple to follow once you understand the basics.
You may never need to refer to this manual but if you do we have tried to present it in a form that you
can access the function you are trying to complete and follow the steps provided.
The Magellan RoadMate has a built-in battery so in most cases you will be able to follow these
instructions while reading them on your computer screen without plugging the Magellan RoadMate to
AC power. You should note that while indoors you may not get any satellite signals so your location
information would not be updated. However, the Centrality™ chipset installed in the Magellan
RoadMate will get satellite signals in some very rough locations so you may notice the Magellan
RoadMate computing a position, even indoors.
This document is set up to be printed on 8.5” x 11” (letter) paper should you desire a printed version
for your reference.
Magellan RoadMate 14121
Magellan RoadMate 1412
A
B
C
D
APower Button
BReset Button
CUSB connector. Power input from vehicle power adapter cable or AC power adapter
(+5 VDC / 2A).
DSD Card slot
Magellan RoadMate 14122
Fundamentals
Powering on the Magellan RoadMate
The On/Off button is located on the bottom right side of the Magellan RoadMate as shown in the
Overview chapter.
Turning the Magellan RoadMate On
1.Press and hold the On/Off button for 1-2 seconds.
2.Read the Warnings and tap OK.
Turning the Magellan RoadMate Off
1.Press and hold the On/Off button for 1-2 seconds.
Selecting Auto-Power Shutdown Time
The Magellan RoadMate can be set up to shut down automatically using the time durations you can
select. The receiver will turn off after the selected duration has passed when; A) the position hasn’t
changed and B) the touchscreen hasn’t been pressed.
1.Access the Main Menu.
2.Tap the Next arrow to access the Main Menu Page 2.
3.Tap User Options.
4.Tap System Settings.
5.Tap Power.
6.Select Auto-Power Off time; Never, 10 Minutes, 20 Minutes or 30 Minutes.
7.Tap Save.
8.Tap the Back arrow to return to the Main Menu.
Volume
There are two ways to access the volume controls; one is tapping the speaker icon on the Map screen
and the other is through User Options.
Changing the Volume from the Map Screen.
1.Tap the speaker icon .
2.Tap on the Mute button to mute the volume or tap inside the volume adjust bar below the
Mute button to change the volume levels.
3.Tap .
If you have the volume muted the speaker icon is displayed with a line through it indicating it is
muted. To unmute, tap the speaker icon again and the Magellan RoadMate will automatically
unmute. To make any other adjustments to the volume, press the speaker icon again.
Fundamentals3
Changing the Volume from User Options
1.Access the Main Menu.
2.Tap the Next arrow to access the Main Menu Page 2.
3.Tap User Options.
4.Tap System Settings.
5.Tap Volume.
6.Tap on the Mute button to mute the volume or tap inside the volume adjust bar below the
Mute button to change the volume levels.
7.Tap .
Brightness
Accessing the Brightness Control
1.Access the Main Menu.
2.Tap the Next arrow to access the Main Menu Page 2.
3.Tap User Options.
4.Tap System Settings.
5.Tap Brightness.
6.Tap inside the brightness adjust bar to set the desired brightness.
7.Tap .
On the Brightness screen there is a checkbox for “On-battery dimming (75%)” When checked, the
Magellan RoadMate will dim to 75% of the brightness when operating exclusively on battery power.
This prolongs the battery life between charges. It can be turned off by tapping on the checkbox.
The Main Menu
The Main Menu screen is the center for all the available functions for the Magellan RoadMate. The
Main Menu consists of two pages with large, easy to access icons.
Accessing the Main Menu
From the Map screen tap the Menu button.
From the other screens, tap the Back button.
Fundamentals4
.Main Menu - Page 1
Show Map: Displays the map with your current position (if computing a position from the GPS
signals) indicated by the blue triangle. See the Map Screen chapter for details.
Enter Address: Displays Enter Address menu. Addresses can be entered by first entering the city, zip
code, or by selecting a city from a list of cities you have already used as destinations. Also provides
access to your address book (my addresses) or to create a route to an intersection. See the chapter on
Routing to an Address for details.
Points of Interest: Displays the Search Points of Interest menu. Search for POIs by entering the
name or by selecting from a list of available categories.
Home: If you have created a Home address, press the Home button for quick access for routing to
your home. If a Home address has not been created, a prompt is displayed to do so. See the Home
Button chapter for more information.
Roadside Assistance: Displays the Locate screen for easy access to information about your present
position should you require assistance.
Fundamentals5
.Main Menu - Page 2
Trip Planner: Opens the Trip Planner menu where you can create, edit, delete, rename or activate a
trip.
Exit POI’s: (Accessible only while on a freeway.) Provides a listing of restaurants, gas stations, or
hotels near approaching freeway exits. You can select one of the POIs presented and create a route to
it.
User Options: Accesses the User Options menu. This menu can be used to access functions used to
customize the Magellan RoadMate to your personal needs.
Home: If you have created a Home address, press the Home button for quick access for routing to
your home. If a Home address has not been created, a prompt is displayed to do so. See the Home
Button chapter for more information.
Roadside Assistance: Displays the Locate screen for easy access to information about your present
position should you require assistance.
Fundamentals6
The Keypad
Understanding the keypad while entering an address is an important part of using your Magellan
RoadMate. The keypad is the most common means of entering data into the Magellan RoadMate.
Keypad Overview
Special Keys
Alphabetic KeypadNumeric Keypad
Symbols KeypadSpacebar
Backspace
AcceptCancel
Selecting From List
After tapping “OK” to accept your input you may get a list of
items found in the database. The sample here shows the result
of tapping “OK” after entering “LOS A”. Use the scroll bar to
move up and down the list and tap on the desired item in the
list to continue.
Fundamentals7
Notes on Entering Data
If you are having trouble getting the results you expected here are a few useful tips.
•Make sure that you have spelled the name correctly. If you are unsure of the spelling, just
enter a few characters and tap “OK”. A long list of names will be displayed but you can
step through the list and probably be able to find the correct spelling.
•Check for apostrophes and hyphens. If you are not seeing the POI you are looking for in
the POI list, check to see if the name has an apostrophe or hyphen.
•When entering a street name you can use the street prefix (N. E. W. S. etc.) to narrow the
search. For example to find N. Main St. you could enter “N. Main” or “N Main”.
•The more characters you enter, the smaller the list of possible options from which to
choose.
Fundamentals8
Installation Instructions
Swivel Mount
Cradle
Alcohol Pad
Adhesive Disk
(optional)
Magellan RoadMate
Vehicle Power Cable
Installation of the Magellan RoadMate is simple and easy. The hardest part will be picking the best
location.
Selecting the Location
A few tips on selecting the proper location.
•Mount the Magellan RoadMate in a place where it can be easily seen and will not interfere
with your view of the road.
•The Magellan RoadMate should be mounted in such a way that the antenna, (located in
the top of the receiver), has an unobstructed view of the sky through the windshield.
•Select whether it will be mounted using the adjustable mount to the windshield or an
adhesive disk. Be sure to check your local and regional laws before mounting to the
windshield. Some states, like California and Minnesota, have laws restricting the
mounting of any device on the windshield. (Adhesive Disks are available from the
Magellan Store at www.magellanGPS.com if one was not supplied with the Magellan
RoadMate.)
•If planning to use the adhesive disk, a smooth surface on the dash board will need to be
selected. Do not attach the adhesive disk to the windshield nor airbag covers.
•Make sure that the Magellan RoadMate nor any cabling will be disturbed in the event that
the airbags are deployed.
Items Needed (no tools required)
Please note that the swivel mount supplied with the Magellan RoadMate may be different then the one shown in this
document.
Installation9
Cleaning the Area
Use the alcohol pad that came with the Magellan RoadMate to clean the area on the windshield or
dash that has been selected for mounting the Magellan RoadMate. Let the area dry completely.
Applying the Adhesive Disk
(Skip if mounting directly to the windshield.)
Remove the protective tape from the back of
the adhesive disk. Apply the disk with the
adhesive side towards the dash. Maintain
pressure on the disk for 5 minutes to allow it
to set in place. Allow the disk 24 hours to
cure before continuing.
Attach the Cradle to the Swivel Mount
Line up the two tabs on the swivel mount
with the holes on the back of the cradle.
Push the cradle down until it locks in place
with the swivel mount.
Secure the Swivel Mount to the Windshield or Adhesive Disk
Make sure that the lever at the base of the
adjustable mount is in the up position. Place
the base of the swivel mount firmly over the
area of the windshield to be used or the
adhesive disk. Push the lever at the base of
the swivel mount all the way down until it
snaps in place. Carefully let go of the
assembly, making sure that it is securely
mounted.
Installation10
Attaching the Magellan RoadMate to the Cradle
Align the tabs on the cradle to the indents on the
bottom of the Magellan RoadMate. Swivel the
cradle up so that it is flush against the back of the
receiver and snap it into place.
Adjust the Mount for Optimum Viewing
Loosen the adjustment locking knobs and position the Magellan RoadMate for optimum viewing.
Once set, tighten the locking knobs. (Never attempt to adjust the mount while driving.)
Connecting Power
Plug the end of the cigarette lighter adapter into a
12 VDC vehicle power receptacle. Connect the
other end of the cable to the Magellan RoadMate’s
USB connector as shown. If there is power at the
receptacle, the Magellan RoadMate will power on.
(Note: some vehicles apply power to the vehicle
power receptacle only when the ignition is on.)
Check Connection and Final Adjustments
If the power indicator light on the vehicle power cable connector is on, power is being supplied to the
Magellan RoadMate. If it is not on, check the cable connection to the vehicle power receptacle. If
the light is still not on, turn the vehicle’s ignition on.
Press the power button (located at the bottom right side of the RoadMate) and hold down for a few
seconds. The Magellan RoadMate will power on. Sit in a normal driving position and make any final
adjustments to the swivel mount for optimum viewing. Tighten the adjusting knobs on the swivel
mount to hold the Magellan RoadMate firmly in place.
Press the power button again to turn the Magellan RoadMate off and turn the ignition switch to the
vehicle to off. The Magellan RoadMate is connected and ready for use.
Installation11
Loading...
+ 42 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.