MG32LED - User’s Quick Reference Guide
KEYPAD OVERVIEW
MG32LED Keypad
Partition 1 Status Partition 2 Status
To Regular Arm:
1. Close all zones in the desired partition.
2. Enter your [
ACCESS CODE]* or [ARM] + [ACCESS
CODE]
To Stay Arm:
1. Press the [
STAY] key.
2. Enter your [
ACCESS CODE]*.
To Sleep Arm:
1. Press the [
SLEEP] key.
2. Enter your [
ACCESS CODE]*
* If needed, press button( s) correspondi ng to desired partitio n(s). For two partitions, p ress the othe r key af ter the confi rmation beep.
ARMING AND DISARMING
TO ARM
WHEN LEAVING...
TO ARM
WHEN STAYING...
To Disarm:
[OFF] + [ACCESS CODE]*
Off Light (orange†)
On = Disarmed
Off = System armed
†Some models feature a red LED
instead of an orange one
AC Light (yellow)
ON = Power on
OFF = Power off
StayD Light (green)
ON = StayD on
= Press once + [
MASTER
CODE] for Quick Menu
Programming)
Zone Display:
The numbers [1] to [32] correspond
to zones 1 to 32 respectively. Open
or entry delay zones are illuminated,
and flash in alarm.
[TBL] Trouble display
ON = Trouble(s) occurring
[
MEM] Alarm memory display
ON = Alarm(s) occurred
[
BYP] Bypass programming
ON = Zone(s) bypassed
Arm (red), Sleep (yel), Stay (grn):
On = Partition armed
Off = Partition disarmed
Flash = Exit Delay
Fast Flash* = Exit Delay (final 10
sec.)
Fast Flash* = Partition in alarm
* Audible Indicators:
Continuous beep = Alarm
Var i ab le be ep = Fire alarm
Intermittent beep = Beginning of exit
delay
Fast beep = Final 10 sec. of
exit delay
Bypassed zones remained unarmed when the
partition is armed.
1. Press the [BYP] key.
2. Enter your [
ACCESS CODE]*.
3. The corresponding LED of all open
zones will illuminate. Select the zone(s)
you want to bypass by entering the twodigit zone number (i.e. zone 3 = 03). The
corresponding zone LED will flash.
4. Press the [
ENTER] key to save and exit.
A Chime Enabled zone will advise you every
time it is opened by causing your keypad to
beep.
1. Press & hold the [
T] key for 3 seconds.
2. Select the zones you want to Chime by
entering the two-digit zone number. The
corresponding zone LED will flash. For
example, to chime zone 2 enter [0] then
[2]. The keypad will automatically save
once the 2-digit zone number is entered.
3. Press the [
ENTER] key to exit.
BYPASS PROGRAMMING
CHIME PROGRAMMING
© Paradox Security Systems Ltd., 2005-2008. Magellan
is a trademark or registered trademark of Paradox
Security Systems Ltd. and its affiliates in Canada , the
United States and/or other countr ies. All rig hts reserve d.
PARADOX.COM
PRINTED IN CANADA 03/2008 MG32LED-EQ02
To send a silent or audible alarm to your
Security Company, press and hold one of the
button combinations listed for 3 seconds.
When a trouble condition occurs, the [
TBL] key
will illuminate.
1. Press the [
TBL] key. The key will flash
and number(s) corresponding to the
trouble(s) will illuminate.
2. Read the corresponding explanation of
the trouble from the trouble list in the
MG5000 User Guide. If no repair
instructions are given, call your security
company for repairs.
3. Press the [
CLEAR] key to exit.
\
To view the alarms that occurred during the
last armed period:
1. Disarm the system.
2. Press the [MEM] key.
3. The corresponding zone numbers that
were in alarm the last time the system
was armed will illuminate.
4. Press the [
CLEAR] key to exit.
To mute the keypad:
Press and hold the [
CLEAR] key for 6
seconds to enable or disable Keypad
Muting.
To modify the backlight:
1. Press and hold the [
S] key for 3 sec-
onds.
2. The [
MEM] key will illuminate.
3. Press the [
S] key to set the desired
backlight level.
4. Press [
CLEAR] or [ENTER] to exit.
PANIC ALARMS
Panic Alarm Type Button Combinations
Police
Medical
Fire
Press [1] & [3]
Press [4] & [6]
Press [7] & [9]
TROUBLE DISPLAY
ALARM MEMORY DISPLAY
KEYPAD SETTINGS
Loading...