Mackie d.2 Specifications

Appendix C: Technical Info

Specifi cations

Owner’s Manual

Frequency Response :

Mic Input to any Output: (Trim at 0 dB):+0, –1 dB
20 Hz to 20 kHz

Line/CD Input to any Output: ±0.5 dB
20 Hz to 20 kHz

Phono input to any Output: ±1 dB of RIAA EQ curve

Distortion (THD and IMD):

THD @ Main Output, 20 Hz to 20 kHz

Mic Input @ 30 dB Gain: Less than 0.0075%

Line/CD Input @ 0 dB Gain: Less than 0.0075%

Phono Input: Less than 0.01%

THD @ Phones Output, 20 Hz to 20 kHz

Line Input @ 0 dB Gain: Less than 0.03%

SMPTE IMD @ +4 dBu Output:

Mic Input @ 30 dB Gain: Less than 0.008%

Line/CD Input @ 0 dB Gain: Less than 0.008%

Common Mode Rejection Ratio (CMRR):

Mic Input (Gain = maximum) Greater than 60 dB
@ 1 kHz

Crosstalk:

Adjacent Inputs or Input to Main Output:
Less than –85 dB
@ 1 kHz

Noise Characteristics:

Equivalent Input Noise (E.I.N.) (20 Hz to 20 kHz):

Mic Input (150 Ω source impedance): Less than –123 dBu

Phono Input (500 Ω/500 mH source impedance):
Less than 0.3 µV

CD/Line Input (150 Ω source impedance):
Less than –110 dBu

Dynamic Range (Main Out): Greater than 100 dB

Maximum Input Levels (rated at 1% THD):

Mic Input (Gain @ minimum): +9 dBu

CD and Line Inputs (PGM Gain = 0 dB):
+22 dBu

FX Input: +22 dBu

Phono Input: 78 mV @ 1kHz

Input Impedance:

Mic Input: 2.4 kΩ balanced

CD/ Line Input: 20 kΩ balanced

FX Return: 20 kΩ balanced

Phono Input: 47.5 kΩ shunted with 200 pF

Maximum Output Levels:

XLR Main Output: +22 dBu

RCA Main Output: +22 dBu

Booth Output: +22 dBu

FX Send: +22 dBu

Phones: 15 volts rms into 8Ω (28 watts)

Output Impedance:

Main XLR/RCA Output: 150 Ω

Booth Output: 150 Ω

FX Send: 150 Ω

Phones: 25 Ω

Equalization

Mic Channel

Low: ±15 dB @ 80 Hz

Mid: ±15 dB @ 2.5 kHz

High: ±15 dB @ 12 kHz

PGM Channel

Low: +10/–inf dB @ 300 Hz

Mid: +10/–inf dB @ 1 kHz

High: +10/–inf dB @ 4 kHz

VU Meters

12-segment pre-fader PGM meters

12-segment pre-fader Main Mix meters

OL (+20), +10, +7, +4, +2, 0, –2, –4, –7, –10, –20, –30

0 LED = +4 dBu

Mic Input Signal Present LED (Sensitivity): –20 dBu

Input/Output Characteristics:

Input Gain Control Range:

Mic Input: +13 dB to +63 dB

PGM Input: OFF to +13 dB

FX Return: OFF to +13 dB

continued

Owner’s Manual

21

AC Power Requirements:

Power Consumption: 20 watts

Universal AC Power Supply: 100 VAC – 240 VAC,
50-60 Hz

Physical Dimensions and Weight:

Height: 15.49”/393.4 mm (including knobs and connectors)

Width: 10"/254 mm

Depth: 4.62”/ 117.3 mm (including knobs and connectors)

Weight: 11 lb/5 kg (with FireWire card)

The d.2 mounting slots are compatible with the Odyssey Battle
Bridge. This consists of two L brackets which bolt to the d.2
and allow you to fi t it securely between two turntable cases.
See www.odysseygear.com for more details.

Options

d.2 FireWire Interface Card

d.2 2-channel DJ Mixer

4.62"

117.3 mm

15.49"

393.4 mm

9.06"

230.1 mm

3.59"

91.2 mm

0.28"

7.1 mm

7.1"

180.3 mm

WEIGHT

11 lb
5 kg

14.79"

375.7 mm

22

4.42"

112.3 mm

10.00"

254 mm

LOUD Technologies Inc. is always striving to improve our prod­ucts by incorporating new and improved materials, components,
and manufacturing methods. Therefore, we reserve the right to
change these specifi cations at any time without notice.

“Mackie,” and the “Running Man” are registered trademarks of
LOUD Technologies Inc. All other brand names mentioned are
trademarks or registered trademarks of their respective hold­ers, and are hereby acknowledged.

©2005 LOUD Technologies Inc. All Rights Reserved.

d.2 DJ Mixer