Sales
P: 801-822-5450
E: sales@luxul.com
Technical Support
P: 801-822-5450 Option 3
E: support@luxul.com
READ ME FIRST
QUICK INSTALL GUIDE
ROUTER SETUP AND CONFIGURATION
Physical Installation
1
The XWR-1750 Wireless Router is designed for simple and e cient installation.
For horizontal installation, position the XWR-1750 on a desk or other horizontal surface with adequate room around the device for ventilation. For wall or
ceiling mounting, the XWR-1750 includes keyholes.
If your computer or device isn’t set to obtain an IP address automatically,
you’ll need to set a temporary static IP address on that device. Set the IP
address of your computer to an address in the 192.168.0.X range, then
set the Gateway/Router address to 192.168.0.1 (the default IP address of
the XWR-1750).
n Note: Visit http://luxul.com/ip-addressing to learn more about
changing your computer’s IP address and getting connected.
Copyright and Trademark Notices
No part of this document may be modifi ed or adapted in any way, for any purposes without permission in
writing from Luxul. The material in this document is subject to change without notice. Luxul reserves the
right to make changes to any product to improve reliability, function, or design. No license is granted, either
expressly or by implication or otherwise under any Luxul intellectual property rights. An implied license
only exists for equipment, circuits and subsystems contained in this or any Luxul product.
© Copyright 2016 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and Simply
Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other trademarks and
registered trademarks are property of their respective holders.
LUX-QIG-XWR-1750-v1 10131602
Dual-Band Wireless
AC1750 Gigabit Router
XWR-1750
Includes:
One: XWR-1750 Dual-Band Wireless AC1750
Gigabit Router
Three: Dual Band Antennas
One: Ethernet Cable
One: Power Adaptor
Connecting Antennas, Ethernet and Power
2
Antennas: Ensure all three antennas are installed on the router.
WAN Connection: Connect the Ethernet cable from the modem/router
equipment provided by your Internet Service Provider (ISP) to the black
WAN port of the XWR-1750.
AC Power: Connect the included AC Adapter to the XWR-1750 fi rst and then
to the AC outlet.
Preparing for Access
3
IP Addressing
The XWR-1750 default LAN IP address is 192.168.0.1. The DHCP server on the
XWR-1750 is confi gured by default to create a 192.168.0.x network.
Both the default LAN IP address and subnet scheme can be changed. However
for hassle-free plug-and-play installation of other Luxul hardware, we recommend you use the default IP address if possible.
If your client device is set to obtain an address automatically, no further
confi guration is required and you can skip to the next step, Access and Setup.
Access and Setup
4
Getting Connected
Connecting Via an Ethernet Device: Use an Ethernet cable to connect
your computer to one of the green XWR-1750 LAN ports. Ethernet is the
preferred method of connection.
Connecting Via a Wireless Device: Connect a wireless client device
to one of the XWR-1750 default wireless networks (Luxul1750 or
Luxul17505G). Both Wireless networks will run in Open Security mode, so
a passphrase will not be required until Wireless Security is confi gured.
Open a web browser, enter 192.168.0.1, then log in to the router using the
default user name and password and proceed with confi guration:
Default IP: 192.168.0.1
Username: admin
Password: admin
n NOTE: If another device on your network shares the 192.168.0.1
address, you’ll need to reassign that device a di erent IP
address to confi gure the XWR-1750.
n NOTE: Only devices that support the 5GHz frequency will see the
default Luxul17505G wireless network.
Hardware Operation
5
XWR-1750 Front Panel LED Indicators
Indicator Name Status Function
For future or custom design
considerations.
5GHz ON A 5GHz wireless network is
broadcasting.
2.4GHz ON A 2.4GHz network is broadcasting.
1-4 LED ON A device is connected to the
corresponding Ethernet port.
FLASHING Data packets are being transmitted
to the connected device.
Internet
LED
USB
LED
ON XWR-1750 is connected to the ISP.
FLASHING Data packets are being transmitted
ON A USB-enabled device is connected
and confi gured.
Indicator Name Status Function
System
LED
Power
LED
LEDs that are not labeled are for future use.
ON The XWR-1750 is booting.
FLASHING The XWR-1750 is operating normally.
OFF The XWR-1750 will not boot
ON Power is applied to the XWR-1750.
OFF Power is not applied to the
XWR-1750.
Front Panel
Rear Panel
XWR-1750 Front Panel View
Antenna Ports: 3 RPSMA female antenna ports to connect the
included antennas.
n NOTE: All three antennas should be installed prior to powering up
the XWR-1750 and are required for optimal performance.
Power Input: Power adapter included.
n NOTE: To reboot the router, disconnect the power adapter,
wait 10 seconds and reconnect the power adapter.
WAN Port: (1) black RJ-45 Ethernet Port for Internet connection.
LAN 1 - 4 Ports: (4) green RJ-45 Ethernet ports for connecting to the
local network.
n NOTE: A Luxul switch is recommended in conjunction with the
XWR-1750 to increase the number of local ports available.
Reset Button: Used to restore factory default settings.
c CAUTION: Holding the Reset button longer than 10 seconds will
result in a factory reset.
To restore factory defaults, press and hold the Reset button until the
System LED stops fl ashing (approximatly 20 seconds). A factory reset
will take one minute or more to complete. A successful factory reset is
indicated when all of the Port LEDs fl ash once. When the System LED
starts fl ashing again, the unit is ready.
c CAUTION: Resetting the XWR-1750 to factory defaults will remove
all custom settings.
XWR-1750 Rear Panel View
Loading...