Logitech 920-002912 User Manual
Getting started with
Première utilisation
Logitech® Wireless Solar Keyboard K750
for Mac
pour Mac
Contents
Logitech® Wireless Solar Keyboard K750
English. . . . . . . . . . 3
Español . . . . . . . . . 7
Français . . . . . . . . . 11
Português . . . . . . . . 15
www.logitech.com/k750-mac/support
. . . . . . . . . . 19
2
Logitech® Wireless Solar Keyboard K750
What’s in the box
Wireless Solar Keyboard K750 for Mac
Unifying receiver
Wireless extender
Cleaning cloth
Setting up the keyboard
1 2 3
USB
USB
1. Plug the Unifying receiver into a computer USB port.
For iMac, Mac Mini and Mac Pro, use the Wireless
extender to minimize the possibility of radio frequency
(RF) interference.
2. Pull the tab to activate the keyboard.
3. Turn on the keyboard.
3 English
Logitech® Wireless Solar Keyboard K750
How much light is needed?
The K750 requires only a modest level of light to operate and store energy. Indirect sunlight or indoor illumination is fine.
When exposed to dim room light on a continuous basis, the K750 has enough power for use. Because indoor environments
usually have periods of darkness, a moderate level of room lighting is recommended for much of the day. The recharge time
for the K750 is much less in brightly lit environments or when the K750 is placed in direct sunlight.
The K750 stores energy automatically, even when turned o. This stored energy allows you to use the K750 without light
for a while. With a full charge, the K750 can operate up to three months in total darkness before needing a recharge.
Checking for adequate light
How do you know whether there’s enough light for the K750? Use the Check Light hot key. The K750 tells you if it’s getting
enough illumination.
1
1. Make sure the K750 is turned on. 2. Press the Check Light hot key. The Check Light LED
will flash either green or red, or it won’t produce any
light at all. For more information, see Reading the Check
Light LED.
2
Reading the Check Light LED
• Check Light LED flashes green. The K750 is receiving
enough light and is ready for use.
• Check Light LED flashes red. The K750 requires more light
to continue working on a long-term basis.
Note: If the Check Light LED produces no light, please see Help
with setup for more information.
4 English
Logitech® Wireless Solar Keyboard K750
Using the Solar App
Want an easy and more visual way of checking the
available light falling on the K750 while keeping track
of the keyboard’s energy reserve? Download and install
the Solar App from www.logitech.com/k750-mac/solarapp
• The Solar App operates in the background and
notifies you whenever there is a change (up or down)
in the K750’s energy reserve.
• Try to keep the Check Light gauge pointing at 100 lux or
higher to make sure the K750 will have plenty of energy.
• To bring the Solar App to the foreground, press the Check
Light hot key on the keyboard. The Solar App will pop up,
and the Check Light gauge will activate immediately.
Check Light gauge
Check Light gauge readout
Energy reserve (historical)
Energy reserve (real time)
Energy reserve readout
(real time)
Status notifications about
energy reserve
Click for guidance about energy
reserve management
Keyboard features
Decrease display brightness
Increase display brightness
Mission control*
Dashboard
Rewind
Play/Pause
*Only works with OS X Lion default Keyboard Shortcuts. See Help with setup section for more details.
Fast-forward
Mute sound
Decrease volume
Increase volume
Eject disc
Plug it. Forget it. Add to it.
You’ve got a Logitech® Unifying receiver. Now add
a compatible wireless keyboard or mouse that uses
the same receiver.
It’s easy. Just start the Logitech® Unifying software*
and follow the onscreen instructions.
For more information and to download the software,
visit www.logitech.com/unifying
*Go to Applications/Utilities/Logitech Unifying Software
5 English
Logitech® Wireless Solar Keyboard K750
Help with setup
Keyboard not working
• Check the Unifying receiver. Also, try changing USB ports.
• Move closer? Try moving the K750 closer to the Unifying receiver, or plug the Unifying receiver into the Wireless extender
if you are using an iMac, Mac Mini, or Mac Pro.
• Is the K750 turned on? Slide the keyboard O/On switch to O and then to On position.
• Re-establish the connection. Use the Unifying software to reset the connection between the K750 and Unifying receiver.
Refer to the Unifying section in this guide for more information.
• Restart the computer.
• Press the Check Light hot key. If the Check Light LED produces no light, the K750 is out of energy. To use the K750 again,
significantly increase the amount of light over the keyboard to a level you might see in a brightly lit oce. It may take
a day or two for the K750 to recharge when exposed to this increased level of illumination, but only several hours if
the K750 is placed in direct sunlight.
Note: Any time the Check Light LED flashes red automatically, the K750 is nearly out of energy and needs more light to keep working on
a long-term basis.
• Download and use the Solar App. This handy widget gives you an easy and more visual way of checking the available light
hitting the K750 while keeping track of the keyboard’s energy reserve. Download the Solar App from www.logitech.com/
k750-mac/solarapp
Mission Control on F3 key not working
This feature only works with OS X Lion default Keyboard Shortcuts. To restore default shortcuts, go to your Mac
System Preferences>Keyboard>Keyboard Shortcuts>Mission Control>Restore Defaults.
If you are using Leopard (Mac OS 10.5) or Snow Leopard (10.6) you can re-assign this key to do ‘Expose’.
Go to Keyboard Shortcuts. Select Exposé. Double click the shortcut and then press the F3 key on the keyboard.
Handling the product at end of life
When you have made the decision to stop using your product, recycle it according to your local laws. Follow the instructions
below to remove the battery (not user replaceable) from the keyboard, and then recycle both the keyboard and battery
as recommended in steps 3 and 4.
1. Use a screwdriver to open the battery tray.
2. Carefully remove the battery from the tray.
3. Hand over the spent battery to the appropriate collection
point for the recycling of batteries.
4. Hand over the product to the appropriate collection point
for the recycling of electrical and electronic equipment.
What do you think?
Please take a minute to tell us.
Thank you for purchasing our product.
www.logitech.com/ithink
6 English
Loading...