Lippert Components Manual Step Owner's Manual

Manual Step

Assemblies

OWNER'S MANUAL

TABLE OF CONTENTS

Introduction 2
Safety 2
Step Operation 3

Unfolding Steps 3
Folding Steps 3

Maintenance 3

Scratches 3
Lubrication 3
Anti-Skid Tape 3

Manual Steps Assemblies 4

Alumi-Tread® 4

Manual Steps Assemblies 5

Steel Steps 5

Manual Steps Assemblies 6

Tread-Lite® 6

Manual Steps Assemblies 7

Introduction

This document details the operation and maintenance of manual steps.

Safety

The “WARNING” symbol above is a sign that an installation procedure has a safety risk involved and

may cause death or serious injury if not performed safely and within the parameters set forth in

this manual. The trailer MUST be supported per manufacturer's recommendations before working

underneath. Failure to do so may result in death, serious personal injury or severe product or

property damage.

Moving parts can pinch, crush or cut. Keep clear and use caution.

Rev: 07.18.18

Page 2

CCD-0001645

Step Operation

Unfolding Steps

1. Pull out on the top lip of the step vertically stored (Fig. 1A).

2. Pull up and out on the back of step resting on the second step (Fig 2A).

3. Unfold bottom step (Fig. 3).

Folding Steps

1. Pull up on bottom step and fold over the second step (Fig. 2A).

2. Pull up on bottom of steps and fold inward under top step (Fig. 1A).

Fig. 1 Fig. 2 Fig. 3

A

A

Maintenance

Scratches

1. Clear any chipped paint or material adhering to scratched area.

2. Apply automotive grade primer to scratch.

3. Paint primed area with automotive high gloss paint.

Lubrication

1. Remove all dirt and foreign matter from hinge areas.

2. Lubricate hinge areas in between the sheet metal portions of the steps.

NOTE: Utilize a dry silicone lubricant. Wet lubricants will attract dirt and possibly cause damage to the hinge

areas.

Anti-Skid Tape

1. Inspect steps for loose, missing or damaged anti-skid tape.

2. Replace anti-skid tape as necessary.

Rev: 07.18.18

Page 3

CCD-0001645

MANUAL STEPS ASSEMBLIES

STEPS

Alumi-Tread

®

B

A

D

C

Callout Part # Description

A 430063 Alumi-Tread® Single Step (OBSOLETE)
B 429994 Alumi-Tread® Double Step (OBSOLETE)
C
D

Rev: 07.27.2018 Contact us: Lippert Components Inc. - ww.lci1.com/support - Phone: [phone] - Email: [e-mail] Page 4 of 8

432696 Alumi-Tread® Triple Step
432698 Alumi-Tread® Quad Step

Steel Steps

MANUAL STEPS ASSEMBLIES

STEPS

F

E

G

H

I

Callout Part # Description

E
F

G

H

I

Rev: 07.27.2018 Contact us: Lippert Components Inc. - ww.lci1.com/support - Phone: [phone] - Email: [e-mail] Page 5 of 8

432678 24" Radius Single Step
432682 24" Radius Double Step
432687 24" Radius Triple Step (7" rise)
432690 24" Radius Triple Step (9" rise)
367091 24" Radius Quad Step (8" rise)
181638 Anti-Skid Tape (19.5" x 1.25")
226893 Anti-Skid Tape (22.25" x .5")
237520 Anti-Skid Tape (21" x 3")

MANUAL STEPS ASSEMBLIES

STEPS

Tread-Lite

®

J

K

L

Callout Part # Description

J 328730 Tread-Lite® - Single (OBSOLETE)
K 344420 Tread-Lite® - Double (OBSOLETE)
L 258998 Tread-Lite® - Triple (OBSOLETE)

Rev: 07.27.2018 Contact us: Lippert Components Inc. - ww.lci1.com/support - Phone: [phone] - Email: [e-mail] Page 6 of 8

MANUAL STEPS ASSEMBLIES

STEPS

NOTE: The below steps are supported by Hickory Springs. To determine if your steps are supported by

Hickory Springs, thoroughly examine them for an "HS" embossed in the side plates. If they are
supported by LCI, you will see an embossed "X" on the side plates instead.

M

O

N

P

Callout

M 235453

N 235454
O 235456

Hickory

Springs Part #

LCI Part # Description

432678 Single Step 24" Radius
432682 Double Step 24" Radius
432687 Triple Step 24" Radius

P 235457 199182 Triple Step Wide Body (OBSOLETE)

Rev: 07.27.2018 Contact us: Lippert Components Inc. - ww.lci1.com/support - Phone: [phone] - Email: [e-mail] Page 7 of 8

The contents of this manual are proprietary and copyright protected by Lippert Components, Inc. (“LCI”).

LCI prohibits the copying or dissemination of portions of this manual unless prior written consent from an

authorized LCI representative has been provided. Any unauthorized use shall void any applicable warranty.

The information contained in this manual is subject to change without notice and at the sole discretion of LCI.

Revised editions are available for free download from lci1.com.

For all concerns or questions, please contact

Ph: [phone] | Web: lci1.com | Email: [e-mail]

Please recycle all obsolete materials.

Lippert Components, Inc.