
Installation 1
Insert the Setup CD-ROM into your CD-ROM drive.A.
If asked, select your preferred language and click B. OK. Click Start Setup
on the first Welcome screen. Then to begin installation, click Next.
Select C. I accept this agreement. Click Next.
The Setup Wizard checks your connection. Click D. Next.

The Setup Wizard displays a series of screens that walk you through the E.
Router’s physical installation. Follow the instructions in these screens.

Wait until the Setup Wizard configures the Router. When the F.
Configuration Complete screen appears, click Next.
Follow the instructions in the remaining screens until you see the G.
Network Configured screen. Click on Learn about connecting other
computers to this network to view sharing options, or click Next to
close the Setup Wizard.
Congratulations! Setup is complete.
NOTE: For more advanced settings and security options, refer to
the User Guide on the CD-ROM.
For additional information or troubleshooting help, refer to the User Guide on the CD-ROM.
Additional support is also available by phone or online.
Website
http://www.linksys.eu
Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries.
Copyright © 2008 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their
respective holders.
8091130NC-AI 3240-00448
Product Registration
http://www.linksys.com/registration