Linksys MB100 User Manual

Wall Mount Bracket for

Quick Installation

Mounting Bracket for
Linksys IP Phones

Linksys SPA900 Series
IP Phones

To attach the Mounting Bracket (MB),
align the two cleats on the MB with the
holes in the phone’s base.

Orient the MB such that the phone’s
Ethernet and handset ports are
accessible after installation.

Enables a phone to be
mounted on a wall

Convenient tray to hold

optional Wi-Fi or PoE dongle

Universal design fits all Linksys
SPA900 Series IP Phones

Linksys
A Division of Cisco Systems, Inc.
121 Theory Drive
Irvine, CA 926127USA

Push the MB onto the phone’s base.
Slide the MB upwards to lock it in place.

Plug in the Ethernet and power cables.

If a Wi-Fi or PoE dongle is installed (optional),
place in the tray.

Hang onto screws mounted in the wall.

E-mail: [e-mail]
[e-mail]

Web:http://www.linksys.com

Linksys products are available in more than
50 countries, supported by 12 Linksys
Regional Offices throughout the world. For a
complete list of local Linksys Sales and
Technical Support contacts, visit our
Worldwide Web Site at www.linksys.com.

Specifications are subject to change without
notice. Linksys is a registered trademark or
trademark of Cisco Systems, Inc. and/or its
affiliates in the U.S. and certain other
countries. Copyright © 2006 Cisco Systems,
Inc. All rights reserved. Other brands and
product names are trademarks or registered
trademarks of their respective holders.

MB100-QI-61130NC LH

Model No.

MB100