EtherFast®8-Port
Gigabit Ethernet Switch
he EtherFast®8-Port Gigabit Ethernet Switch takes your
network to a whole new level of productivity—and does it
using your existing architecture. There’s no need to abandon your present equipment or radically change your way of
doing things. This switch from Linksys allows you to do what you
already do—only faster!
Apply this switching power to your current Ethernet network,and
your data traffic efficiency will improve several times over.
Connect your Gigabit-equipped workstations to the Switch's
10/100/1000 ports for full-duplex, dedicated bandwidth of up to
1000Mbps!
With the EtherFast 8-Port Gigabit Ethernet Switch, you can connect your existing 10/100 Ethernet network to your Gigabit network backbone without any additional equipment. All ports are
auto-negotiating, and have auto MDI/MDI-X. Address learning
and aging is supported,as well as 802.3x flow control with headof-line blocking prevention to keep your high-speed clients from
bogging down in low-speed traffic.
The EtherFast 8-Port Gigabit Ethernet Switch from Linksys is the
all-in-one solution for your Gigabit and 10/100 networking needs.
• 8 10/100/1000 Mbps Auto-Negotiating Half/Full Duplex
Switched Ports
• Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x,
IEEE 802.3ab
• Fully wire speed reception and transmission
• Integrated address look-up engine supports 8K MAC
addresses
• Automatic address learning and address aging
• Embedded 512K data packet memory
• Head of Line (HOL) blocking prevention
• Auto MDI/MDI-X on each port
EtherFast®8-Port Gigabit Ethernet Switch
Model No.: EF3508
Wire-speed switching and Linksys reliability
in an 8-port Gigabit switch
Features
Features
Benefits
Benefits
• Eight 10/100/1000Mbps, half/full duplex,
switched ports
• Forwards and filters packets at non-blocking,
full wire speed
• All ports have auto speed negotiation and
MDI/MDI-X
• Supports address learning and aging, 802.3x
flow control and head-of-line blocking prevention
Instant EtherFast®Series
T