Linear ENC-PS User Manual

ENC-PS
Power Supply
Installation Instructions
Multi-Room Audio
Distribution System
1. PRODUCT DESCRIPTION
This switching power supply is designed for structured wiring grid mounting in Linear’s structured wiring enclosures and on Linear’s structured wiring mounting brackets.
The AC line cord connects the 120 VAC supply. The two-terminal low voltage connector on the 26 VDC output connects to the system’s music distribution hub (Model ENC-HUB).
An internal green power indicator lights when the supply is operating and is visible through the unit’s case vents.
2. POWER SUPPLY FEATURES
ENC-PS
POWER OUTPUT 26 VDC @ 1.2 A
POWER INDICATOR (INSIDE CASE)
USA & Canada (800) 421-1587 & (800) 392-0123
(760) 438-7000 - Toll Free FAX (800) 468-1340
www.linearcorp.com
POWER INPUT 120 VAC
3. CABINET WITH AC OUTLET INSTALLED 4. HUB AND POWER SUPPLY INSTALLATION LIMITED WARRANTY
This Linear product is warranted against defects in material and workmanship for twenty four (24) months. This warranty extends only to wholesale customers who buy direct from Linear or through Linear’s normal distribution channels. Linear does not warrant this product to consumers. Consumers should inquire from their selling dealer as to the nature of the dealer’s warranty, if any. There are no obligations or liabilities
on the part of Linear LLC for consequential damages arising out of or in connection with use or performance of this product or other indirect damages with respect to loss of property, revenue, or profi t, or cost of removal, installation, or reinstallation. All implied warranties, including
implied warranties for merchantability and implied warranties for fi tness, are valid only until the warranty expires. This Linear LLC Warranty is in lieu of
all other warranties express or implied.
All products returned for warranty service require a Return Product Authorization Number (RPA#). Contact Linear Technical Service at 1-800­421-1587 for an RPA# and other important details.
Copyright © 2009 Linear LLC 227876 A
STRUCTURED
WIRING
ENCLOSURE
(LINEAR H312KIT
ENCLOSURE
SHOWN)
120 VAC OUTLET IN J-BOX INSTALLED BY LICENSED ELECTRICIAN
MOUNTING
GRID
ENC-HUB
(LINEAR MODEL H336 ENCLOSURE SHOWN)
CONNECT POWER SUPPLY OUTPUT CABLE TO HUB POWER INPUT CONNECTOR
CONNECT POWER SUPPLY INPUT CABLE TO 120 VAC OUTLET IN WIRING ENCLOSURE
ENC-PS
Loading...