Linear EASY-TOUCH User Manual
EASY-TOUCH Request to Exit
PRESS
TO
EXIT
Front View
Back View
SPECIFICATIONS:
ELECTRICAL:
VOLTAGE:
0 to 40 VDC
CURRENTRATING:
200ma typical, 400 ma maximum
RESISTANCE:
ON: less then 50 ohms
OFF: Greater than 5 Meg ohms
MECHANICAL:
3" wide x, 4.5" Length, x .5" Depth
ENVIRONMENTAL:
TEMPERATURE:
-20° F to 180° F ( This is not limited
by the switch but the label material)
Switch Life:
Greater than 20,000,000 operations
Closure Duration:
1/4 seconds typical
To operate an External relay
Connect one wire
from your power
supply to the EASYTouch.
The other wire connects to one side of
the relay coil then to
the EASY-Touch
Power
Supply
Relay
Packing Checklist:
IEIEASY-TOUCH (1)
Two Conductor Harness(1)
5/64 Allen Head Screws (2)
Mounting Gasket (1)
5/64 Allen Wrench (1)
Self Adhesive labels (3)
Side View
RED
Side View
Connecting EASY-TOUCHto an IEIKeypad
Black
Connect to either:
Screw terminals marked
W/O and BR
or
Wires:
white with orange trace
and brown
Other Access
Control Device
Requiring a
Normally Open
Momentary
Push to Close
for Egress
Side View
610 0580 Rev 1.1
To Install:
1.) Attach Red & Black wires to normally open request to exit loop.
2.) Secure the wire connections and tuck them inside the electrical box
3.) Place the foam gasket behind the EASY-TOUCH and mount to an electrical box with the allen
screws provided.
4.) When wiring the EASY-TOUCH or any request to exit device to any of the IEI access control
keypads ( excluding the 212 series ) and you are not using a door position switch, you must
jump closed the door position loop.
* any further install questions, please consult the Technical Support Department at IEI
Features:
IEI Access Control Products:
• Weatherproof self-contained
IEI Self-Contained Access Control Series
metal housing
The powerful features of an intergrated access control
system in the form of a simple to install self-contained unit
• Suitable for most environments
IEI Secured Series
• No moving parts
Networkable, single-door controllers allow flexible yet
powerful, full-function access control.
IEI Command and Control Series
Flexible keypads with user programmable outputs which
• Rugged and vandal resistant
• No need for skin contact; gloved
hands, elbows, etc. o.k.
can control a lock or any device with an on/off switch.
• No Power Required
If this product does not seem to operate properly, please call our Technical Department toll free at 1-800-343- 9502
(781-821-5566) Monday -Friday 8:00 am-7:00 pm EST.
We understand your time is valuable, and we know that calling our Technical Support Department will ensure that you’ll
make the most profit possible with your IEI product. Thank you for your purchase. We appreciate your business.
the manufacturer’s instructions, and have not been modified or tampered with. IEI does not assume any responsibility for damage or injury to person or property due to
improper care, storage handling, abuse, misuse, normal wear and tear, or an act of God.
charges prepaid), after obtaining IEI’s Return Merchandise Authorization. IEI will not be liable to the purchaser or any one else for incidental or consequential damages
arising from any defect in, or malfunction of, its products.
er, including, without limitation to, the condition of its products, their merchantability, or fitness for any particular.
International Electronics,Inc.(IEI) warrants its products to be free from defects in material and workmanship, when they have been installed in accordance with
IEI’s sole responsibility is limited to the repair (at IEI’s option)or the replacement of the defective product or part when sent to IEI’s facility (freight and insurance
This warranty shall expire two years after shipping date. Except as stated above, IEI makes no warranties, either express or implied, as to any matter whatsoev-
INTERNATIONAL
ELECTRONICS, INC
INTERNATIONAL ELECTRONICS, INC.
427TURNPIKE STREET, CANTON,MA02021 U.S.A.
800-343-9502, 781-821-5566
781-821-4443 (FAX)
TM
FAX INFORMATION CENTER 781-821-0734 (FROM YOUR FAX MACHINE)
Visit our website for Access Control & Glassbreak information,
New Products, Specifications, Applications, Seminars, and Partners
@ www.ieib.com
610 0580 Rev 1.1
Loading...