Line 6 Catalyst CX 200 Watt 2x12 gitaarversterker combo, Catalyst CX 60 Watt 1x12 gitaarversterker combo, Catalyst CX 100 Watt 1x12 gitaarversterker combo Line 6 Quick Start Guide
Factory Reset: Press and hold B and MANUAL while powering on
NEW
2.0
UPDATE
AMP MODELS EFFECT MODELS
Select one of six amp voicings from group
1 or 2 using the SELECTOR knob
CARILLON
ELMSLEY
ARISTOCRAT
GSG-100
ARCHETYPE CLEAN
1
2
CLARITY
1
2
1
2
VOLTAGE
1
2204 MOD
2
OBLIVION
1
BADONK
2
KINETIC
1
VENTOUX
2
Press and hold EFFECT 1 or 2
1
button to enter selection mode
Press TAP button to switch
2
categories
Turn the SELECTOR knob to
3
select the desired effect model
Press EFFECT 1 or 2 button
4
again to lock selection and exit
HOLD
EFFECT
Tape Echo Analog Delay
Vintage Digital
Simple Delay
DELAY
Dual Delay
Dynamic
PRESS
TAP
MODULATION
Phaser
Tremolo
Chorus
®
QUICK START GUIDE
Turn over to see the
feature specifications
PRESS
TAP
PRESS
EFFECT
EXIT
Flanger
U-Vibe
Rotary
PRESS
TAP
Pitch Harmony
Growler
Octaver
PITCH
PRESS
TAP
Pitch Shift
Octave Fuzz
Synth String
REVERB
Chamber Plate
Spring
Modulated
ShimmerHall
AMP GROUP SELECTION SAVE CHANNEL MANUAL MODE BANK SELECTION SOFTWARE
PRESS A + B
Press A and B simultaneously
to switch between
Amp Groups 1 and 2
HOLD A or B
Hold either channel button
A or B until you see the
lights blink to save
PRESS MANUAL
Press MANUAL to use
manual mode - what you
see is what you get
HOLD MANUAL
Press and hold MANUAL and use
the SELECTOR knob to access six
banks of preset channels
The Catalyst Edit free software
lets you adjust deep edit
parameters and save/organize
your presets
NEW
2.0
UPDATE
®
SPECIFICATIONS
Turn over to see the
quick start guide
12 Amp Voicings
Models taken from the Helix® family of products
®
Boost
Custom matched to each amp design
Built-In Effects
24 effects taken from the Helix® family of products
DUAL-CHANNEL AMPLIFIERS FEATURING 12 AMP VOICINGS
TAKEN FROM THE HELIX® FAMILY OF PRODUCTS
Traditional Controls
Primary controls immediately recognizable
Tap Tempo/Tuner
Set time-based effects or activate the onboard tuner
Optional LFS2 Footswitch
Change channels, effects, banks, and more
60W 1X12” GUITAR AMP
© 2023 Yamaha Guitar Group, Inc. All rights reserved. Line 6, the Line 6 logo, HELIX, CATALYST, and the CATALYST logo are registered trademarks of Yamaha Guitar Group, Inc. in the U.S. and/or other jurisdictions.
100W 1X12” GUITAR AMP
200W 2X12” GUITAR AMP
XLR Output
Pro connection for stage and recording
Effects Loop
Insert external effects
Power Amp In
Connect your favorite modeler
Power Level Control
Consistent tone at any volume
USB Interface
Connect to Catalyst Edit app or record direct
MIDI*
Receive channel/preset and CC messages
*USB MIDI only on Catalyst CX 60
Loading...