FUNCTIONS:
In this modification all electrical control
equipment on the operator is enclosed in a
Watertight/Oiltight Control Enclosure. If the
operator is supplied with a solenoid brake,
the solenoid itself is not considered part of
the electrical control equipment (it has no
electrical contact points) and is therefore
supplied in a general purpose enclosure
only. This modification may be supplied
even if the only controls on the operator are
the limit switches and interlock switches, but
the price remains the same (separate wall
mounted starter supplied at additional cost).
Must be factory installed.
WATER TIGHT / OILTIGHT
CONTROL ENCLOSURE
65-9206
NOTE: This modification does not include
watertight/oiltight enclosures for push button
stations or other similar remote control
stations.
Model H
01-13419A All Rights Reserved
© 1998, The Chamberlain Group, Inc.