Life Fitness Olympic Heavy Duty User Manual
Olympic Heavy Duty
Accessory Rack
Owner’s Manual
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Qty
2
1
12
12
12
12
1
2
1
1
8
8
8
1
Tools Required:
O
3/4” Wrench
O
Standard Allen Wrench Set
O
Ratchet with 3/4” Socket
O
Rubber Mallet
O
Ratchet Extension
O
9/16” Socket
Description
Upright
Left Base
1/2” x 4.25” Bolt
Plastic Dome Washer
1/2” I.D. Washer
1/2” Nylock Nut
Right Base
Bracket
Center Cross Brace
Left Adjustment Rack
3/8” x 3.5” Hex Screw
3/8” I.D. Washer
3/8” Nylock Nut
Right Adjustment Rack
Part Number
80304XX
80889XX
3239317
7617301
3239505
3102801
80306XX
80888XX
80302XX
7584501
3245201
3239503
3102802
7584401
OHD Accessory Rack
1. Assembly Instructions
1. Assemble one UPRIGHT (1) and the LEFT BASE (2) using two 1/2” X
4.25” BOLTS (3), two 1/2” PLASTIC DOMED WASHERS (4), two 1/2” I.D.
WASHERS (5) and two 1/2” NYLOCK NUTS (6) as shown. Tighten the
BOLTS and NUTS securely. Do not overtighten the BOLTS and NUTS.
NOTE: Be sure the flush-ground surface Q at the bottom of the
UPRIGHT (1) is positioned to face the inward as shown.
Repeat the procedure to assemble the remaining UPRIGHT (1) to the
RIGHT BASE (7)
2. Assemble one BRACKET (8) to each UPRIGHT (1) and base (2, 7) using
four 1/2” X 4.25” BOLTS (3), four 1/2” PLASTIC DOMED WASHERS (4),
four 1/2” I.D. WASHERS (5) and four 1/2” NYLOCK NUTS (6) as shown.
Tighten the BOLTS and NUTS securely. Do not overtighten the BOLTS
and NUTS.
3. Assemble the CENTER CROSS-BRACE (9) to the two UPRIGHTS (1) using
four 1/2” X 4.25” BOLTS (3), four 1/2” PLASTIC DOMED WASHERS (4),
four 1/2” I.D. WASHERS (5) and four 1/2” NYLOCK NUTS (6) as shown.
Tighten the BOLTS and NUTS securely. Do not overtighten the BOLTS
and NUTS.
Loading...