Life Fitness 90R, 95Xi, 90S, 93C, 91Ti User Manual 2

LCD Entertainment Ready

Installation Instructions

CORPORATE HEADQUARTERS

10601 West Belmont Avenue

Franklin Park, Illinois 60131 • U.S.A.

847.288.3300 • FAX: [phone]

800.735.3867 (Toll-free within U.S.A., Canada)

INTERNATIONAL OFFICES

M051-00K71-A002

07/07

1

LIFE FITNESS ASIA PACIFIC LTD

Room 2610, Miramar Tower
132 Nathan Road
Tsimshatsui, Kowloon
HONG KONG
Telephone: [phone]
FAX: [phone]

LIFE FITNESS ATLANTIC BV
LIFE FITNESS BENELUX

Bijdorpplein 25-31
2992 LB Barendrecht
THE NETHERLANDS
Telephone: [phone]
FAX: [phone]

LIFE FITNESS BENELUX NV

Parc Industriel de Petit-Rechain
4800 Verviers
BELGIUM
Telephone: [phone]
FAX: [phone]

LIFE FITNESS DO BRAZIL

Av. Dr. Dib Sauaia Neto 1478
Alphaville, Barueri, SP
06465-140
BRAZIL
Telephone [phone]
FAX: [phone]

LIFE FITNESS AUSTRIA

Vertriebs GmbH
Hintschiggasse 1
1100 Vienna
AUSTRIA
Telephone: [phone]
FAX: [phone]

LIFE FITNESS IBERIA

Pol. Ind. Molí dels Frares. c/C, nº 12
08620 Sant Vicenç dels Horts (Barcelona)
España
Telephone: [phone]
FAX: [phone]

LIFE FITNESS EUROPE GMBH

Siemensstrasse 3
85716 Unterschleissheim
GERMANY
Telephone: [phone]
FAX: [phone]

LIFE FITNESS ITALIA S.R.L.

Via San Pieretto
37010 AFFI (Verona)
ITALY
Telephone: [phone]
FAX: [phone]

LIFE FITNESS LATIN AMERICA
and CARIBBEAN

10601 West Belmont Avenue
Franklin Park, Illinois 60131
U.S.A.
Telephone: [phone]
FAX:[phone]

LIFE FITNESS UK LTD

Queen Adelaide
Ely, Cambs CB7 4UB
UNITED KINGDOM
Telephone: [phone]
FAX: [phone]

LIFE FITNESS JAPAN

Nippon Brunswick Bldg., #8F
5-27-7 Sendagaya
Shibuya-Ku, Tokyo
Japan 151-0051
Telephone: [phone]
FAX: [phone]

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi­dential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference with radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antennas.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modifications to this equipment could void the

product warranty.
Mise en garde : tout changement ou toute modification de ce matériel peut annuler la garantie

du produit.

Any service, other than cleaning or user maintenance, must be performed by an authorized service representative.
There are no user serviceable parts.

2

TABLE OF CONTENTS

3

Section Description Page

1. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

2. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Models New 95Ti Treadmill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Models 95Li Summit Trainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Models 95Ci, 93C, 90C Upright Exercise Bikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Models 95Ri, 93R, 90R Recumbent Exercise Bikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Models 95Si, 93S, 90S Stairclimbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Models 95Xi, 93X, 90X Cross-Trainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Models 91Ti, 90T Treadmills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Models 97Ti, 95Ti, 93T Treadmills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

3. Console Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

© 2007 Life Fitness, a division of Brunswick Corporation. All rights reserved.

• DANGER: To reduce the risk of electrical shock, always unplug this Life Fitness product before cleaning or

attempting any maintenance activity.

• WARNING:To reduce the risk of burns, fire, electric shock, or injury, it is imperative to connect each prod-

uct to a properly grounded electrical outlet.

• WARNING:To prevent injury, this product must be securely attached in accordance with the installation

instructions.

• Never operate a Life Fitness product if it has a damaged power cord or electrical plug, or if it has been dropped,
damaged, or even partially immersed in water. If this occurs, contact Life Fitness Customer Support Services as out­lined in Service Contacts at the end of this manual.

• Position this product so that the AC power cord plug is accessible to the user.

• Keep the power cord away from heated surfaces. Do not pull the equipment by the power cord or use the cord as a
handle.

• If the electrical supply cord is damaged, it must be replaced by the manufacturer, an authorized service agent, or a
similarly qualified person to avoid a hazard.

• Do not use this product in areas where aerosol spray products are being used or where
oxygen is being administered. Such substances create the danger of combustion and
explosion.

• Always follow the product instructions for proper operation.

• Never insert objects into any opening of the Life Fitness product. If an object should drop inside, unplug this Life
Fitness product and carefully retrieve it while the unit is not in use. If the object cannot be reached, contact Life
Fitness Customer Support Services.

• Do not use this product outdoors, near swimming pools or in areas of high humidity. Do not expose this product to
dripping or splashing liquids .If the product should be exposed to liquid, contact Life Fitness Customer Support
Services.

• Never operate a Life Fitness product with the air openings blocked. Keep air openings free of lint, hair, or any
obstructing material.

• Use this product only for its intended use as described in this manual. Do not use attachments that have not been
recommended by the manufacturer.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

IMPORTANT SAFETY INSTRUCTIONS

4

• DANGER:Pour réduire les risques de décharge électrique, toujours débrancher cet appareil Life Fitness

avant le nettoyage ou toute mesure d'entretien.

•

AVERTISSEMENT: Pour réduire les risques de brûlures, d'incendies, de décharges électriques ou de

blessures, chaque appareil doit absolument être branché sur une prise électrique correctement mise à la terre.

•

AVERTISSEMENTPour prévenir les blessures, ce produit doit être solidement fixé, conformément

aux instructions d'installation.

• Ne jamais faire fonctionner un produit Life Fitness dont la fiche ou le cordon d'alimentation est endommagé, ni

aucun appareil qui serait tombé ou aurait été endommagé ou même partiellement plongé dans l'eau. Si cela se pro­duit, communiquer avec le service à la clientèle de Life Fitness de la manière indiquée à la rubrique Coordonnées
des réparateurs agréés à la fin du présent guide.

• Placer l'appareil de façon à ce que l'utilisateur ait accès à la fiche du cordon d'alimentation.

• Tenir le cordon d'alimentation à l'écart de toute surface chauffée. Ne pas tirer l'appareil par le cordon d'alimentation;

ne pas utiliser le cordon comme poignée.

• Si le cordon d'alimentation électrique est endommagé, il doit être remplacé par le fabricant, par un réparateur agréé

ou par une personne qualifiée afin d'éviter tout danger.

• Ne pas utiliser ce produit dans des salles où des vaporisateurs aérosols sont employés ou bien où de l'oxygène est

administré. Ces substances créent des risques de combustion et d'explosion.

• Toujours suivre les instructions sur le produit pour s'assurer de son fonctionnement adéquat.

• Ne jamais insérer aucun objet dans les ouvertures du produit Life Fitness. Si un objet tombe à l'intérieur du produit

Life Fitness, le débrancher et extraire l'objet soigneusement pendant que l'appareil est débranché. S'il est impossi­ble d'atteindre l'objet, communiquer avec le service à la clientèle de Life Fitness.

• Ne pas utiliser ce produit à l'extérieur, près d'une piscine ou dans des endroits très humides. Ne pas exposer ce pro-

duit à des liquides qui s'égouttent ni à des éclaboussures. Si le produit est en contact avec des liquides, communi­quer avec le service à la clientèle de Life Fitness.

• Ne jamais faire fonctionner d'appareil Life Fitness dont les orifices d'aération seraient bloqués. Les garder exempts

de peluches, de cheveux ou de toute obstruction.

• Utiliser ce produit uniquement pour les fins auxquelles il est destiné et de la manière décrite dans le présent

manuel. Ne pas utiliser d'accessoires qui ne sont pas recommandés par le fabricant.

CONSERVER CES INSTRUCTIONS POUR TOUT USAGE ULTÉRIEUR.

5

CONSIGNES DE SECURITE IMPORTANTES

Note to the CATV Installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the ground­ing system of the building as close to the point of cable entry as practical.

Antenna Grounding According to the NEC

Antenna Grounding According to the National Electrical Code, ANSI/NFPA 70.

1. Antenna lead in wire

2. Antenna discharge unit (NEC Section 810-20)

3. Grounding conductors (NEC Section 810-21)

4. Ground clamp

5. Power service grounding electrode system (NEC Article 250, Part H)

6. Ground clamp

7. Electric service equipment

REMOTE CONTROL CONFIGURATION

TOOLS REQUIRED: Metric Allen Set

Mount the PIVOT DISC (A) and FRONT BRACKET (B) to the back of the REMOTE CONTROL (C) using
one SCREW (D). Leave the SCREW loose at this time.

Select a user accessible location to mount the REMOTE CONTROL. Position the remote with
bracket at the desired location. Pivot the remote as necessary for optimal user access.

NOTE: If the desired location is such that the BRACKET will not work for mounting,
remove the FRONT BRACKET and reinstall the PIVOT DISC. The remote can now
be installed using the two CABLE TIES (E) or FASTENER DISCS provided with the
REMOTE. Be sure the PIVOT DISC is oriented to accomodate the mounting sur­face.

Tighten the screw to secure the PIVOT DISC and FRONT BRACKET to the
remote.

Reposition the REMOTE with BRACKET in the desired location and secure the
REMOTE to the equipment using the REAR BRACKET (F) and two SCREWS (G).
Tighten the SCREWS securely.

NOTE: Two differing length of SCREWS (G) are included to accomodate various mounting thicknesses.
NOTE: The REMOTE CABLE (H) can be routed through any of two cable routing channels in the back of the REMOTE or around the

PIVOT DISC.

Recommended Remote Locations:
Product Location Attachment Method

95/97Ti Treadmill Ergobar - far right side Bracket direct to tube
90/91Ti Treadmill Ergobar - far right side Bracket direct to tube
90/93/95Xi Cross-Trainer Aft of water bottle tray - centered Controller mounts to unique bracket

on monocolumn

91X Cross-Trainer Bullhorn near weld to console support tube Bracket direct to tube

- near LEFT side
95Li Summit Trainer Handrail crossbar - near right of water tray Bracket direct to tube
90/93/95Si Stairclimber Handrail crossbar - near left of Polar cover Bracket direct to tube
90/93/95Ci Upright Bike Modified Polar cover w/ holes for Controller mounts to modified Polar

cable ties - centered cover via cable ties

90/93/95Ri Recumbent Bike Front bullhorn handle - right side Bracket direct to tube

INSTALLATION

6

MODELS NEW 95TI TREADMILLS

TOOLS REQUIRED: Phillips Screwdriver, Metric Allen Set, M16 & M17 Wrench
PARTS

NOT USED FROM KIT: (1) Main Bracket Cap, (1) Grommet

1. Turn off the treadmill and unplug it from the power outlet.

2. Remove the six SCREWS securing the MOTOR COVER. Remove the MOTOR COVER and set it
and the screws aside.

3. Remove the protective liner from one of the provided FASTENER STRIPS.Attach the fastener
strip to the bottom of the POWER BLOCK (1). Interlock the remaining FASTENER STRIP to the
installed FASTENER STRIP. Remove the remaining protective liner from FASTENER STRIP and
secure the POWER BLOCK to the FRAME as shown.

4. Plug the POWER CORDS (2) leading from the MOTOR COMPARTMENT and LEFT UPRIGHT
into their respective ends of the POWER BLOCK (1). Feed excess cable into the LEFT UPRIGHT.

5. Re-install the MOTOR COVER using the six previously removed SCREWS.

6. Attach the LOWER MOUNTING BRACKET (3) to the MAIN BRACKET (4) as shown using four
SCREWS (5) and WASHERS (6) each. Tighten the SCREWS securely. (8-10 ft. lbs.)

7. Slide the new BRACKET COVER (7) over the top end of the MAIN BRACKET (4) and down to
meet the LOWER MOUNTING BRACKET (3) as shown.

8. Attach the TV BRACKET (with bent tab) (8) to the MAIN BRACKET (4) as shown using four
SCREWS (5) and WASHERS (6). Tighten the SCREWS securely. (8-10 ft. lbs.)

9. Remove the two SCREWS (9) securing the REAR CONSOLE COVER (10) to the FRAME.
Remove the REAR CONSOLE COVER. Remove the TOP INSERT (11) from the REAR CON­SOLE COVER and discard. Set the REAR CONSOLE COVER aside.

Achieve Console Units Only:

10. Remove the two SCREWS (--) securing the BOTTOM INSERT (--) and remove the insert. Do not
discard the SCREWS.

11. Locate the REMOTE CONTROL (--) and REMOTE BRACKET (--). Feed the REMOTE CABLE (-­) through the large access hole in the REMOTE BRACKET (--). With the REMOTE CONTROL (-

-) and REMOTE BRACKET (--) oriented as shown, secure them together using one SCREW.
Tighten the SCREW securely.

12. Carefully feed the REMOTE CABLE (--) through the opening in the bottom of the CONSOLE (-­) and through the back of the CONSOLE. Position the REMOTE BRACKET (--) into position
replacing the BOTTOM INSERT (--). Secure the REMOTE BRACKET using the previously
removed SCREWS.

13. Carefully pull the MEDIA CABLE BUNDLE (12) (POWER, COAXIAL, I-R CONTROL
(remote cable on achieve consoles), S-VIDEO) from inside the CONSOLE BRIDGE
(13). Un-bundle and straighten the MEDIA CABLES.

Install the COAXIAL EXTENSION COUPLER and COAXIAL EXTENSION
CABLE.

14. Connect the I-R CONTROL (A) and S-VIDEO (B) CABLES to the back
of the DISPLAY CONSOLE (C).

15. Tape the ends of the all CABLES (POWER, COAXIAL, I-R CONTROL
(remote cable on achieve consoles), S-VIDEO) together.

16. Holding the MAIN BRACKET ASSEMBLY (4) close to the CONSOLE
BRIDGE (13) as shown. With the holes facing upward, feed the taped end of
the MEDIA CABLES (12) through the bottom of the MAIN BRACKET ASSEM­BLY and out of the UPPER HOLE as shown. Carefully pull excess MEDIA
CABLE through the MAIN BRACKET ASSEMBLY.

17. Slide one GROMMET (14) over the taped end of the MEDIA CABLES (12).
Install the GROMMET into the top access hole.

18. Tilt the MAIN BRACKETASSEMBLY (4) upward and align the
LOWER MOUNTING BRACKET (3) holes with those in
the CONSOLE BRACKET POSTS. Secure the MAIN
BRACKET ASSEMBLY using four SCREWS (5)
and WASHERS (6). Tighten the SCREWS
securely. (8-10 ft. lbs.)

CAUTION: Raise the BRACKET COVER (7) to meet the
exiting MEDIA CABLES before mounting the MAIN BRACKET
ASSEMBLY.

7