Life Fitness 841101 User Manual
841101 WEIGHT STACK OPTION
ASSEMBLY INSTRUCTIONS
CLASS H
PART # 6754401
REV . A
1
Version: 841101
Revision: 06/19/01
IMPORTANT NOTES
WELCOME TO THE WORLD OF Serious steel!
Please note:
* Thank you for purchasing the Parabody 841 101 WEIGHT STACK OPTION. Please read these
instructions thoroughly and keep them for future reference. This product must be assembled on
a flat, level surface to assure its proper function.
We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy
water. Touch-up paint can be purchased from your Parabody customer service representative
at (800) 328-9714.
There is a risk assumed by individuals who use this type of equipment. To minimize risk, please
follow these rules:
1. Inspect equipment daily . T ighten all loose connections and replace worn parts immediately.
Failure to do so may result in serious injury.
2. Do not allow minors or children to play on or around this equipment.
3. Exercise with care to avoid injury .
4. If unsure of proper use of equipment, call your local Parabody distributor or call the
Parabody customer service department at (800) 328-9714.
5. Consult a physician before beginning any exercise program.
T ools Required for Assembly
* 3/4” wrench
* 9/16” wrench
* Ratchet with 3/4” and 9/16” sockets
* Adjustable wrench
* T ape measure
Bolt Length Ruler
NOTE: BOL T LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.
BOL T LENGTH RULER:
1/2 1/2 1/2 1/2 1/2 1/2
0
1
BOLT LENGTH
2
345
2
6
PARTS LIST
KEY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
PART #
6750803
6753703
6274402
6275302
6609002
6610402
6750503
6176201
6754501
6189501
3116101
3116201
6284501
6714601
6758701
6577701
6542402
3103102
3108002
6595201
3117401
6467001
DESCRIPTION
UPRIGHT
TOP BOOM
LOW ROW BAR
LAT BAR
LOW ROW ATTACHMENT
KNEE SUPPORT
WEIGHT STACK BASE
ROLLER P AD
79-1/2” GUIDE ROD
WEIGHT STACK LABEL
4-1/2” PULLEY
3-1/2” PULLEY
WEIGHT STACK SHAFT
HEAD PLATE
LAT CABLE
LOW ROW CABLE
1-3/4” X 5-1/4” PLATE
1 X 8” GRIP
WEIGHT STACK CUSHION
GUIDE ROD BUSHING
CAP PLUG
2” SQ COVER CAP
QTY
1
1
1
1
1
1
1
2
2
1
1
6
1
1
1
1
2
4
2
2
4
1
KEY
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
PART #
3102901
3102933
3102922
3102904
3102915
3102910
3102502
3102801
3102501
3102802
6480301
6692601
3119301
6405201
6236701
6177001
6214401
3013801
6075906
6382301
6214501
DESCRIPTION
3/8 X 1-1/4” BOLT
3/8 X 2” BOLT
3/8 X 2-3/4” BOLT
3/8 X 3” BOLT
3/8 X 3-1/4” BOLT
1/2 X 3” BOLT
1/2” WASHER
1/2” LOCK NUT
3/8” WASHER
3/8” LOCK NUT
3/8” FLANGE SPACER
3 X 2” END CAP
2-1/2” ROUND END CAP
2” SQ. END CAP
1-3/4” SQ. END CAP
NON-SKID STRIP
SELECTOR PIN
5/16” SNAP LINK
12 LINK CHAIN
PLATE BUSHING 10 CT
WEIGHT PLATE
QTY
1
2
6
2
2
4
4
3
11
12
10
2
2
2
1
2
1
3
1
4
20
5
35
FIGURE 1
38
STEP 1:
• Insert two 2-1/2” ROUND END CAPS (35) to the LOW ROW ATTACHMENT (5) as shown in FIGURE 1.
• Attach two NON-SKID STRIPS (38) to the LOW ROW ATTACHMENT (5) as shown in FIGURE 1.
3
POWER RACK
36
1
36
32
31
31
3/8 X 3-1/4” 27
5
FIGURE 2
STEP 2:
• Insert two 2” SQ ENDCAPS (36) into the ends of the UPRIGHT (1) as shown in FIGURE 2.
• SECURELY assemble the LOW ROW ATTACHMENT (5) and the UPRIGHT (1) to the POWER RACK using two 3/8 X 3-1/4”
BOLTS (27), four 3/8” WASHERS (31), and two 3/8” LOCK NUTS (32). See FIGURE 2.
1/2 1/2 1/2 1/2 1/2 1/2
0
1
2
345
4
6
1/2 X 3” 28
1
29
7
30
22
FIGURE 3
STEP 3
• Slide one 2” SQ. COVER CAP (22) over the end of the WEIGHT STACK BASE (7) as shown in FIGURE 3.
• SECURELY assemble the WEIGHT STACK BASE (7) to the UPRIGHT (1) using two 1/2 X 3” BOLTS (28), two 1/2” WASH-
ERS (29), and two 1/2” LOCK NUTS (30) as shown in FIGURE 3.
STEP 4
• Insert two WEIGHT PLATE BUSHINGS (42) into
the “PARABODY” side of each of the twenty
WEIGHT PLATES (43) as shown in FIGURE 4.
42
43
FIGURE 4
5
Loading...