Liebherr R954C User Manual

Machine for Industrial Applications

Operating Weight: 96,800 – 100,600 kg Engine Output: 240 kW / 326 HP

R 954 C

li tr on ic

`

High Rise

Technical Data

Engine

Rating per ISO 9249

��

Model

��

Type Bore/Stroke Displacement Engine operation

��

Cooling

Air cleaner

Fuel tank Standard Electrical system Voltage Batteries Starter

��

Alternator

��

Hydraulic System

Hydraulic pump for attachment and travel drive

Max. flow Max. pressure Pump regulation

Hydraulic pump for swing drive

Max. flow Max. pressure Hydraulic tank Hydraulic system Hydraulic oil filter

Hydraulic oil cooler

MODE selection

ECO

POWER

LIFT FINE

RPM adjustment

��

Hydraulic Controls

Power distribution

Flow summation Closed-loop circuit Servo circuit Attachment and swing Travel

��

Additional functions

��

240 kW (326 HP) at 1,800 RPM Liebherr D 936 L 6 cylinder in-line 122/150 mm

10.5 l 4-stroke diesel

unit pump system turbo-charged and after-cooled

water-cooled and integrated motor oil

cooler

dry-type air cleaner with pre-cleaner,

primary and safety elements, automatic

dust discharge 700 l sensor controlled engine idling

24 V 2 x 170 Ah/12 V 24 V/7.8 kW three phase current 28 V/80 A

two Liebherr variable flow, swash plate

pumps 2 x 350 l/min. 350 bar electro-hydraulic with electronic engine

speed sensing regulation, pressure com-

pensation, flow compensation, automatic

oil flow optimizer

reversible, variable flow, swash plate pump,

closed-loop circuit 211 l/min. 384 bar 440 l 790 l 2 full flow filters in return line with inte-

grated fine filter area (5 µm) cooler unit, consisting of radiator for engine

coolant with after-cooler core, sandwiched

with cooler for hydraulic fluid and fuel with

hydro statically controlled fan drives adjustment of machine performance and

the hydraulics via a mode selector to match

application for especially economical and environ-

mentally friendly operation for maximum digging power and heavy

duty jobs for lifting for precision work and lifting through very

sensi tive movements stepless adjustment of engine output via

rpm at each selected mode

via control valves in single block with inte-

grated safety valves to boom and stick for uppercarriage swing drive

�

proportional via joystick levers proportional via foot pedal via foot pedals or joystick push buttons

Swing Drive

��

Drive by

Transmission Swing ring

Swing speed Swing torque Holding brake

Option

��

Operator’s Cab

��

Cab

Operator’s seat

Joysticks Monitoring

Air conditioning

Noise emission ISO 6396 2000/14/EC

��

Undercarriage

Version HR

��

Drive

Transmission Travel speed

��

Drawbar pull max. Track components Track rollers/ Carrier rollers Tracks Track pads Digging locks

Brake valves

��

Attachment

��

Type

Hydraulic cylinders

��

Pivots Lubrication

VarioLiftPlus

��

Liebherr swash plate motor with integrated

brake valves Liebherr compact planetary reduction gear Liebherr, sealed single race ball bearing

swing ring, internal teeth 0 – 6.0 RPM stepless 154 kNm wet multi-disc (spring applied, pressure

released) pedal controlled positioning brake

resiliently mounted, sound insulated, tinted

windows, front window stores overhead,

door with sliding window fully adjustable, shockabsorbing suspen-

sion, adjustable to operator’s weight and

size, 6-way adjustable Liebherr seat integrated into adjustable consoles menu driven query of current operating

conditions via the LCD display. Automatic

monitoring, display, warning (acoustical

and optical signal) and saving machine

data, for example, engine overheating, low

engine oil pressure or low hydraulic oil level standard air conditioning, combined

cooler/ heater, additional dust filter in fresh

air/recircu lated

LpA (inside cab) = 77 dB(A) LWA (surround noise) = 105 dB(A)

Liebherr swash plate motors with inte-

grated brake valves on both sides Liebherr planetary reduction gears low range – 2,6 km/h

high range – 3,6 km/h 553 kN D 8 K, maintenance-free

13/3 sealed and greased flat pad

wet multi-discs (spring applied, pressure

released) integrated into travel motor

high-strength steel plates at highly-

stressed points for the toughest require-

ments. Complex and stable mountings of

attachment and cylinders. Unrivalled

strength, even at high loads Liebherr cylinders with special seal system.

Shock absorption sealed, low maintenance Liebherr semi-automatic central lubrication

system variable boom mounting positions for opti-

mized lift capacities

2 R 954 C Litronic High Rise

Dimensions

W

L

U

Z

V

X

mm A 3,060 A1 5,320 C 6,350 D 4,510 E 4,600 F 4,400 H with Double Parallelogram 6,000 H with Parallelogram + Intermediate Piece 0.5 m 6,340 K 3,780 L 6,400 P 1,395 Q 640 S 5,250 U 7,540 Z 8,260 N 750 B 6,120 G 6,450

E = Tail radius

E D

H

K

N

A1

A

Q

S B G

Industrial-Type Straight Boom 11.50 m and Industrial Stick m 9.00 10.00

V mm 8,800 8,200 W mm 5,800 5,800 X mm 16,650 16,650

Industrial-Type Straight Boom 12.50 m and Industrial Stick m 9.00 10.00

V mm 9,700 8,600 W mm 5,800 5,800 X mm 17,650 17,650

Industrial-Type Gooseneck Boom 11.50 m and Industrial Stick m 9.00 10.00

W mm 5,900 5,900 X mm 16,100 16,100

Industrial-Type Gooseneck Boom 12.50 m and Industrial Stick m 9.00 10.00

W mm 5,800 5,800 X mm 17,100 17,100

P

E

F

W

L

U

Z

X

D

H

K

N

A1

A

C

Q

S B G

P

R 954 C Litronic High Rise 3

VarioLiftPlus

Variable Boom Mounting Positions for Optimized Lift Capacities

with the same working range with a different working range

Hole A

Hole B

Hole 3

Hole 2

Hole D

2A

Version 2A

2A

3B

Kinematic variant 2A:

Increased lift capacities above ground level

Kinematic variant 3B:

Increased lift capacities below ground level and when working at large outreach

with a different working range

Kinematic variant 3A:

Altered range curve with additional reach depth, e.g. for unloading from ships

3B

3A

Hole C

Hole 3

Hole 2

3D

Version 3D

3D

Kinematic variant 3D:

Increased lift capacities below ground level and when working at large outreach

3C

Kinematic variant 3C:

Altered range curve with additional reach depth, e.g. for unloading from ships

4 R 954 C Litronic High Rise

Industrial Attachment

with Industrial-Type Straight Boom 11.50 m

m

80

70

60

50

40

30

20

10

-10

-20

-30

ft

26

24

22

20

18

16

14

12

10

8

6

4

2

0

-2

-4

-6

-8

1

3

2

4

1618202224

m024614 812 10

Attachment Envelope

Kinematic variant 2A

1 with industrial stick 9.00 m 2 with industrial stick 10.00 m 3 with industrial stick 9.00 m and grapple model 72 C 4 with industrial stick 10.00 m and grapple model 72 C

Operating Weight and Ground Pressure

Operating weight includes basic machine with hydraulic cab elevation parallelogram + intermediate piece 0.5 m, counterweight 14.5 t, industrial-type straight boom 11,.0 m, industrial stick 9.00 m and grapple model 72 C with 5 semi-closed tines 1.20 m

Undercarriage HR

Pad width mm 750 Weight kg 96,800 Ground pressure kg/cm

Operating weight includes basic machine with hydraulic cab elevation parallelogram + intermediate piece 0.5 m, counterweight 14.5 t, industrial-type straight boom 11.50 m, industrial stick 10.00 m and grapple model 72 C with 5 semi-closed tines 1.20 m

Undercarriage HR

3

.

2

1.01

3

.

5080

ft0102030406070

Pad width mm 750 Weight kg 97,200 Ground pressure kg/cm

2

1.01

R 954 C Litronic High Rise 5

Lift Capacities

with Industrial-Type Straight Boom 11.50 m

Industrial Stick 9.00 m (Variant 2A)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

carriage

m

13.0* 13.0* 5.92

12.9* 12.9* 10.9* 10.9* 9.9* 9.9* 9.56

12.6* 12.6* 11.0* 11.0* 8.6* 8.6* 11.95

13.3* 13.3* 12.3* 12.3* 10.8* 10.8* 8.5* 8.5* 7.9* 7.9* 13.76

13.0* 13.0* 11.6* 11.6* 10.5* 10.5* 7.9* 7.9* 7.4* 7.4* 15.20

13.0* 13.0* 11.6* 11.6* 10.4* 10.4* 9.4* 9.4* 7.0* 7.0* 16.38

13.0* 13.0* 11.6* 11.6* 10.4* 10.4* 9.3* 9.3* 8.4* 8.4* 6.8* 6.8* 17.35

14.6* 14.6* 13.1* 13.1* 11.6* 11.6* 10.4* 10.4* 9.3* 9.3* 8.4* 8.4* 7.1* 7.1* 6.7* 6.7* 18.14

15.2* 15.2* 13.2* 13.2* 11.7* 11.7* 10.4* 10.4* 9.3* 9.3* 8.3* 8.3* 7.4* 7.4* 6.6* 6.6* 18.77

15.6* 15.6* 15.5* 15.5* 13.5* 13.5* 11.8* 11.8* 10.5* 10.5* 9.3* 9.3* 8.3* 8.3* 7.3* 7.3* 6.4* 6.4* 19.27

15.9* 15.9* 18.5* 18.5* 15.9* 15.9* 13.7* 13.7* 11.9* 11.9* 10.5* 10.5* 9.3* 9.3* 8.2* 8.2* 7.2* 7.2* 6.1* 6.1* 6.0* 6.0* 19.64

23.9* 23.9* 24.8* 24.8* 19.7* 19.7* 16.3* 16.3* 13.8* 13.8* 12.0* 12.0* 10.5* 10.5* 9.2* 9.2* 8.1* 8.1* 7.1* 7.1* 5.9* 5.9* 5.6* 5.6* 19.88

9.4* 9.4* 25.5* 25.5* 20.0* 20.0* 16.4* 16.4* 13.9* 13.9* 11.9* 11.9* 10.4* 10.4* 9.1* 9.1* 7.9* 7.9* 6.9* 6.9* 5.7* 5.7* 5.1* 5.1* 20.01

2.5* 2.5* 12.3* 12.3* 19.9* 19.9* 16.3* 16.3* 13.7* 13.7* 11.7* 11.7* 10.2* 10.2* 8.8* 8.8* 7.7* 7.7* 6.6* 6.6* 5.3* 5.3* 4.7* 4.7* 20.03

2.2* 2.2* 7.3* 7.3* 19.2* 19.2* 15.8* 15.8* 13.3* 13.3* 11.4* 11.4* 9.8* 9.8* 8.5* 8.5* 7.3* 7.3* 6.1* 6.1* 4.7* 4.7* 4.2* 4.2* 19.93

2.9* 2.9* 6.5* 6.5* 14.0* 14.0* 14.9* 14.9* 12.6* 12.6* 10.8* 10.8* 9.3* 9.3* 7.9* 7.9* 6.7* 6.7* 5.5* 5.5* 4.0* 4.0* 3.7* 3.7* 19.72

4.0* 4.0* 6.9* 6.9* 12.5* 12.5* 13.5* 13.5* 11.6* 11.6* 9.9* 9.9* 8.5* 8.5* 7.2* 7.2* 6.0* 6.0* 4.7* 4.7* 3.3* 3.3* 19.20

7.7* 7.7* 12.4* 12.4* 11.7* 11.7* 10.1* 10.1* 8.7* 8.7* 7.4* 7.4* 6.2* 6.2* 5.0* 5.0* 3.6* 3.6* 17.93

9.4* 9.4* 8.3* 8.3* 7.2* 7.2* 6.1* 6.1* 4.9* 4.9* 4.3* 4.3* 15.79

Industrial Stick 10.00 m (Variant 2A)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

The lift capacities are stated in metric tonnes (t) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities are valid for 750 mm track flat pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic check valves on the hoist cylinders, when they are used for lifting operations which require the use of lifting accessories.

carriage

m

11.4* 11.4* 9.7* 9.7* 8.70

11.2* 11.2* 9.6* 9.6* 8.1* 8.1* 11.48

10.9* 10.9* 9.5* 9.5* 7.3* 7.3* 7.2* 7.2* 13.52

11.5* 11.5* 10.6* 10.6* 9.2* 9.2* 7.0* 7.0* 6.7* 6.7* 15.14

11.9* 11.9* 11.2* 11.2* 10.1* 10.1* 8.8* 8.8* 6.3* 6.3* 16.46

12.2* 12.2* 11.2* 11.2* 10.0* 10.0* 9.1* 9.1* 8.1* 8.1* 6.0* 6.0* 17.56

12.5* 12.5* 11.2* 11.2* 10.0* 10.0* 9.1* 9.1* 8.2* 8.2* 7.0* 7.0* 5.9* 5.9* 18.46

12.6* 12.6* 11.2* 11.2* 10.1* 10.1* 9.1* 9.1* 8.2* 8.2* 7.3* 7.3* 5.8* 5.8* 19.20

12.8* 12.8* 11.3* 11.3* 10.1* 10.1* 9.1* 9.1* 8.2* 8.2* 7.3* 7.3* 6.4* 6.4* 5.7* 5.7* 19.80

13.7* 13.7* 13.0* 13.0* 11.4* 11.4* 10.2* 10.2* 9.1* 9.1* 8.1* 8.1* 7.2* 7.2* 6.3* 6.3* 5.7* 5.7* 20.28

13.9* 13.9* 15.4* 15.4* 13.2* 13.2* 11.6* 11.6* 10.2* 10.2* 9.1* 9.1* 8.1* 8.1* 7.2* 7.2* 6.2* 6.2* 5.4* 5.4* 20.63

15.1* 15.1* 17.9* 17.9* 15.8* 15.8* 13.4* 13.4* 11.7* 11.7* 10.2* 10.2* 9.0* 9.0* 8.0* 8.0* 7.1* 7.1* 6.1* 6.1* 5.0* 5.0* 20.86

33.8* 33.8* 24.8* 24.8* 19.5* 19.5* 16.1* 16.1* 13.6* 13.6* 11.7* 11.7* 10.2* 10.2* 9.0* 9.0* 7.9* 7.9* 6.9* 6.9* 5.9* 5.9* 4.6* 4.6* 20.98

6.0* 6.0* 25.2* 25.2* 19.7* 19.7* 16.1* 16.1* 13.5* 13.5* 11.6* 11.6* 10.1* 10.1* 8.8* 8.8* 7.7* 7.7* 6.6* 6.6* 5.6* 5.6* 4.3* 4.3* 4.3* 4.3* 21.00

3.3* 3.3* 10.5* 10.5* 19.4* 19.4* 15.8* 15.8* 13.3* 13.3* 11.3* 11.3* 9.8* 9.8* 8.5* 8.5* 7.4* 7.4* 6.3* 6.3* 5.2* 5.2* 3.8* 3.8* 20.91

3.3* 3.3* 7.6* 7.6* 17.9* 17.9* 15.2* 15.2* 12.8* 12.8* 10.9* 10.9* 9.4* 9.4* 8.1* 8.1* 6.9* 6.9* 5.8* 5.8* 4.6* 4.6* 3.3* 3.3* 20.70

4.0* 4.0* 7.2* 7.2* 13.8* 13.8* 14.1* 14.1* 11.9* 11.9* 10.2* 10.2* 8.7* 8.7* 7.5* 7.5* 6.3* 6.3* 5.2* 5.2* 3.9* 3.9* 2.8* 2.8* 20.38

4.9* 4.9* 7.6* 7.6* 12.7* 12.7* 12.6* 12.6* 10.8* 10.8* 9.2* 9.2* 7.9* 7.9* 6.7* 6.7* 5.5* 5.5* 4.3* 4.3* 3.0* 3.0* 19.31

8.3* 8.3* 12.1* 12.1* 10.6* 10.6* 9.2* 9.2* 7.9* 7.9* 6.7* 6.7* 5.6* 5.6* 4.4* 4.4* 3.4* 3.4* 17.69

8.2* 8.2* 7.3* 7.3* 6.3* 6.3* 5.2* 5.2* 4.3* 4.3* 14.75

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity

6 R 954 C Litronic High Rise

Industrial Attachment

with Industrial-Type Straight Boom 11.50 m

m

80

70

60

50

40

30

20

10

-10

-20

-30

ft

26

24

22

20

18

16

14

12

10

8

6

4

2

0

-2

-4

-6

-8

-10

1

3

2

4

1618202224

m024614 812 10

Attachment Envelope

Kinematic variants 3A/3B

1 with industrial stick 9.00 m (3B) 2 with industrial stick 9.00 m and grapple model 72 C (3B) 3 with industrial stick 9.00 m (3A) 4 with industrial stick 9.00 m and grapple model 72 C (3A)

Operating Weight and Ground Pressure

Operating weight includes basic machine with hydraulic cab elevation parallelogram + intermediate piece 0.5 m, counterweight 14.5 t, industrial-type straight boom 11.50 m, industrial stick 9.00 m and grapple model 72 C with 5 semi-closed tines 1.20 m

Undercarriage HR

Pad width mm 750 Weight kg 96,800 Ground pressure kg/cm

3

.

2

1.01

80

70

60

50

40

30

20

10

-10

-20

-30

5080

m

ft

26

24

22

20

18

16

14

12

10

8

6

4

ft0102030406070

Attachment Envelope

Kinematic variants 3A/3B

1 with industrial stick 10.00 m (3B) 2 with industrial stick 10.00 m and grapple model 72 C (3B) 3 with industrial stick 10.00 m (3A) 4 with industrial stick 10.00 m and grapple model 72 C (3A)

Operating Weight and Ground Pressure

Operating weight includes basic machine with hydraulic cab elevation parallelogram + intermediate piece 0.5 m, counterweight 14.5 t, industrial-type straight boom 11.50 m, industrial stick 10.00 m and grapple model 72 C with 5 semi-closed tines 1.20 m

3

.

Undercarriage HR

2

0

-2

-4

-6

-8

-10

1

3

2

4

1618202224

m024614 812 10

Pad width mm 750 Weight kg 97,200 Ground pressure kg/cm

2

1.01

5080

ft0102030406070

R 954 C Litronic High Rise 7

Lift Capacities

with Industrial-Type Straight Boom 11.50 m

Industrial Stick 9.00 m (Variant 3A)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

carriage

m

9.7* 9.7* 10.12

9.3* 9.3* 8.5* 8.5* 12.40

10.7* 10.7* 9.2* 9.2* 7.8* 7.8* 14.14

9.8* 9.8* 8.6* 8.6* 7.3* 7.3* 15.54

9.7* 9.7* 9.0* 9.0* 7.5* 7.5* 7.0* 7.0* 16.69

9.7* 9.7* 9.0* 9.0* 8.4* 8.4* 6.8* 6.8* 17.63

9.7* 9.7* 9.0* 9.0* 8.4* 8.4* 7.8* 7.8* 6.7* 6.7* 18.39

10.8* 10.8* 9.9* 9.9* 9.1* 9.1* 8.4* 8.4* 7.8* 7.8* 6.6* 6.6* 19.00

12.4* 12.4* 11.1* 11.1* 10.1* 10.1* 9.2* 9.2* 8.5* 8.5* 7.8* 7.8* 6.6* 6.6* 19.48

14.8* 14.8* 12.9* 12.9* 11.4* 11.4* 10.3* 10.3* 9.3* 9.3* 8.5* 8.5* 7.8* 7.8* 7.1* 7.1* 6.6* 6.6* 19.83

23.4* 23.4* 18.6* 18.6* 15.6* 15.6* 13.4* 13.4* 11.8* 11.8* 10.5* 10.5* 9.5* 9.5* 8.6* 8.6* 7.8* 7.8* 7.1* 7.1* 6.7* 6.7* 20.06

5.4* 5.4* 25.4* 25.4* 19.8* 19.8* 16.3* 16.3* 13.9* 13.9* 12.1* 12.1* 10.7* 10.7* 9.6* 9.6* 8.7* 8.7* 7.8* 7.8* 7.0* 7.0* 6.5* 6.5* 20.17

1.9* 1.9* 9.5* 9.5* 20.7* 20.7* 16.9* 16.9* 14.2* 14.2* 12.3* 12.3* 10.8* 10.8* 9.6* 9.6* 8.6* 8.6* 7.7* 7.7* 6.8* 6.8* 6.3* 6.3* 20.17

2.0* 2.0* 6.4* 6.4* 16.9* 16.9* 17.2* 17.2* 14.4* 14.4* 12.4* 12.4* 10.9* 10.9* 9.6* 9.6* 8.6* 8.6* 7.6* 7.6* 6.6* 6.6* 6.1* 6.1* 20.06

2.8* 2.8* 6.1* 6.1* 12.6* 12.6* 17.1* 17.1* 14.4* 14.4* 12.4* 12.4* 10.8* 10.8* 9.5* 9.5* 8.4* 8.4* 7.3* 7.3* 6.2* 6.2* 5.8* 5.8* 19.83

4.0* 4.0* 6.7* 6.7* 11.7* 11.7* 16.6* 16.6* 14.1* 14.1* 12.1* 12.1* 10.5* 10.5* 9.2* 9.2* 8.0* 8.0* 6.9* 6.9* 5.5* 5.5* 19.48

5.2* 5.2* 7.6* 7.6* 11.8* 11.8* 15.7* 15.7* 13.4* 13.4* 11.6* 11.6* 10.0* 10.0* 8.7* 8.7* 7.5* 7.5* 6.2* 6.2* 5.1* 5.1* 19.00

8.6* 8.6* 12.5* 12.5* 14.4* 14.4* 12.4* 12.4* 10.7* 10.7* 9.3* 9.3* 8.0* 8.0* 6.7* 6.7* 5.3* 5.3* 17.92

12.6* 12.6* 11.0* 11.0* 9.5* 9.5* 8.1* 8.1* 6.8* 6.8* 6.1* 6.1* 15.76

Industrial Stick 10.00 m (Variant 3A)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

The lift capacities are stated in metric tonnes (t) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities are valid for 750 mm track flat pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic check valves on the hoist cylinders, when they are used for lifting operations which require the use of lifting accessories.

carriage

m

7.9* 7.9* 11.97

8.0* 8.0* 7.1* 7.1* 13.94

9.4* 9.4* 7.6* 7.6* 6.6* 6.6* 15.51

9.2* 9.2* 8.6* 8.6* 6.9* 6.9* 6.3* 6.3* 16.79

8.5* 8.5* 8.0* 8.0* 6.0* 6.0* 17.85

9.1* 9.1* 8.5* 8.5* 8.0* 8.0* 7.5* 7.5* 5.8* 5.8* 18.73

9.2* 9.2* 8.6* 8.6* 8.0* 8.0* 7.4* 7.4* 5.7* 5.7* 19.45

9.4* 9.4* 8.6* 8.6* 8.0* 8.0* 7.4* 7.4* 6.9* 6.9* 5.7* 5.7* 20.03

10.5* 10.5* 9.6* 9.6* 8.8* 8.8* 8.1* 8.1* 7.5* 7.5* 6.9* 6.9* 5.7* 5.7* 20.49

12.2* 12.2* 10.9* 10.9* 9.8* 9.8* 8.9* 8.9* 8.2* 8.2* 7.5* 7.5* 6.9* 6.9* 5.7* 5.7* 20.82

14.7* 14.7* 12.7* 12.7* 11.2* 11.2* 10.0* 10.0* 9.1* 9.1* 8.3* 8.3* 7.6* 7.6* 6.9* 6.9* 5.9* 5.9* 5.7* 5.7* 21.04

32.7* 32.7* 23.8* 23.8* 18.7* 18.7* 15.5* 15.5* 13.3* 13.3* 11.6* 11.6* 10.3* 10.3* 9.2* 9.2* 8.3* 8.3* 7.6* 7.6* 6.9* 6.9* 6.1* 6.1* 5.8* 5.8* 21.14

4.2* 4.2* 21.8* 21.8* 19.8* 19.8* 16.2* 16.2* 13.7* 13.7* 11.9* 11.9* 10.5* 10.5* 9.3* 9.3* 8.4* 8.4* 7.6* 7.6* 6.8* 6.8* 5.9* 5.9* 5.8* 5.8* 21.14

2.8* 2.8* 8.7* 8.7* 20.5* 20.5* 16.6* 16.6* 14.0* 14.0* 12.1* 12.1* 10.6* 10.6* 9.4* 9.4* 8.4* 8.4* 7.5* 7.5* 6.6* 6.6* 5.6* 5.6* 5.6* 5.6* 21.03

3.1* 3.1* 6.9* 6.9* 15.4* 15.4* 16.8* 16.8* 14.1* 14.1* 12.1* 12.1* 10.6* 10.6* 9.3* 9.3* 8.3* 8.3* 7.3* 7.3* 6.4* 6.4* 5.4* 5.4* 20.81

3.9* 3.9* 6.9* 6.9* 12.6* 12.6* 16.6* 16.6* 13.9* 13.9* 12.0* 12.0* 10.4* 10.4* 9.1* 9.1* 8.0* 8.0* 7.0* 7.0* 6.0* 6.0* 5.1* 5.1* 20.48

4.9* 4.9* 7.4* 7.4* 12.0* 12.0* 16.0* 16.0* 13.5* 13.5* 11.6* 11.6* 10.1* 10.1* 8.8* 8.8* 7.6* 7.6* 6.6* 6.6* 5.3* 5.3* 4.8* 4.8* 20.03

5.9* 5.9* 8.2* 8.2* 12.2* 12.2* 14.9* 14.9* 12.7* 12.7* 11.0* 11.0* 9.5* 9.5* 8.2* 8.2* 7.0* 7.0* 5.8* 5.8* 4.5* 4.5* 19.31

9.1* 9.1* 12.9* 12.9* 13.5* 13.5* 11.6* 11.6* 10.0* 10.0* 8.6* 8.6* 7.4* 7.4* 6.1* 6.1* 5.1* 5.1* 17.68

11.5* 11.5* 10.0* 10.0* 8.6* 8.6* 7.4* 7.4* 6.4* 6.4* 14.68

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity

8 R 954 C Litronic High Rise

Lift Capacities

with Industrial-Type Straight Boom 11.50 m

Industrial Stick 9.00 m (Variant 3B)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

carriage

m

13.6* 13.6* 12.3* 12.3* 6.77

13.2* 13.2* 11.5* 11.5* 9.7* 9.7* 10.12

11.8* 11.8* 10.8* 10.8* 9.3* 9.3* 8.5* 8.5* 12.40

11.3* 11.3* 10.4* 10.4* 9.6* 9.6* 9.1* 9.1* 7.8* 7.8* 14.14

10.1* 10.1* 9.4* 9.4* 8.8* 8.8* 8.4* 8.4* 7.3* 7.3* 15.54

10.1* 10.1* 9.3* 9.3* 8.7* 8.7* 8.3* 8.3* 7.5* 7.5* 7.0* 7.0* 16.69

10.1* 10.1* 9.4* 9.4* 8.7* 8.7* 8.2* 8.2* 7.8* 7.8* 6.8* 6.8* 17.63

11.4* 11.4* 10.3* 10.3* 9.5* 9.5* 8.8* 8.8* 8.2* 8.2* 7.8* 7.8* 7.4* 7.4* 6.7* 6.7* 18.39

11.8* 11.8* 10.7* 10.7* 9.7* 9.7* 9.0* 9.0* 8.3* 8.3* 7.8* 7.8* 7.4* 7.4* 6.6* 6.6* 19.00

14.3* 14.3* 12.5* 12.5* 11.1* 11.1* 10.1* 10.1* 9.2* 9.2* 8.5* 8.5* 7.9* 7.9* 7.4* 7.4* 6.6* 6.6* 19.48

16.3* 16.3* 15.5* 15.5* 13.3* 13.3* 11.7* 11.7* 10.4* 10.4* 9.5* 9.5* 8.7* 8.7* 8.0* 8.0* 7.5* 7.5* 6.9* 6.9* 6.6* 6.6* 19.83

28.4* 28.4* 21.1* 21.1* 16.9* 16.9* 14.2* 14.2* 12.3* 12.3* 10.8* 10.8* 9.7* 9.7* 8.9* 8.9* 8.1* 8.1* 7.5* 7.5* 6.9* 6.9* 6.7* 6.7* 20.06

5.4* 5.4* 23.5* 23.5* 18.3* 18.3* 15.1* 15.1* 12.9* 12.9* 11.3* 11.3* 10.0* 10.0* 9.1* 9.1* 8.3* 8.3* 7.6* 7.6* 6.9* 6.9* 6.6* 6.6* 20.17

1.9* 1.9* 9.5* 9.5* 19.5* 19.5* 15.9* 15.9* 13.4* 13.4* 11.6* 11.6* 10.3* 10.3* 9.2* 9.2* 8.4* 8.4* 7.6* 7.6* 6.9* 6.9* 6.5* 6.5* 20.17

2.0* 2.0* 6.4* 6.4* 16.9* 16.9* 16.4* 16.4* 13.8* 13.8* 11.9* 11.9* 10.5* 10.5* 9.4* 9.4* 8.4* 8.4* 7.6* 7.6* 6.8* 6.8* 6.4* 6.4* 20.06

2.8* 2.8* 6.1* 6.1* 12.6* 12.6* 16.7* 16.7* 14.1* 14.1* 12.1* 12.1* 10.6* 10.6* 9.4* 9.4* 8.4* 8.4* 7.5* 7.5* 6.6* 6.6* 6.3* 6.3* 19.83

6.7* 6.7* 11.7* 11.7* 16.7* 16.7* 14.1* 14.1* 12.1* 12.1* 10.6* 10.6* 9.3* 9.3* 8.3* 8.3* 7.3* 7.3* 6.4* 6.4* 19.19

7.6* 7.6* 11.8* 11.8* 16.3* 16.3* 13.8* 13.8* 11.9* 11.9* 10.4* 10.4* 9.1* 9.1* 8.0* 8.0* 7.0* 7.0* 17.83

15.5* 15.5* 13.2* 13.2* 11.4* 11.4* 9.9* 9.9* 8.6* 8.6* 8.3* 8.3* 15.46

Industrial Stick 10.00 m (Variant 3B)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

The lift capacities are stated in metric tonnes (t) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities are valid for 750 mm track flat pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic check valves on the hoist cylinders, when they are used for lifting operations which require the use of lifting accessories.

carriage

m

11.8* 11.8* 9.9* 9.9* 9.4* 9.4* 9.34

11.5* 11.5* 10.0* 10.0* 7.9* 7.9* 11.97

10.0* 10.0* 9.3* 9.3* 8.0* 8.0* 7.1* 7.1* 13.94

9.6* 9.6* 8.9* 8.9* 8.4* 8.4* 7.6* 7.6* 6.6* 6.6* 15.51

9.4* 9.4* 8.8* 8.8* 8.2* 8.2* 7.8* 7.8* 6.9* 6.9* 6.3* 6.3* 16.79

9.4* 9.4* 8.7* 8.7* 8.2* 8.2* 7.7* 7.7* 7.3* 7.3* 6.0* 6.0* 17.85

9.4* 9.4* 8.7* 8.7* 8.2* 8.2* 7.7* 7.7* 7.3* 7.3* 6.9* 6.9* 5.8* 5.8* 18.73

9.6* 9.6* 8.9* 8.9* 8.3* 8.3* 7.7* 7.7* 7.3* 7.3* 6.9* 6.9* 5.7* 5.7* 19.45

9.9* 9.9* 9.1* 9.1* 8.4* 8.4* 7.8* 7.8* 7.3* 7.3* 6.9* 6.9* 6.6* 6.6* 5.7* 5.7* 20.03

11.6* 11.6* 10.4* 10.4* 9.4* 9.4* 8.6* 8.6* 8.0* 8.0* 7.5* 7.5* 7.0* 7.0* 6.6* 6.6* 5.7* 5.7* 20.49

14.0* 14.0* 12.3* 12.3* 10.9* 10.9* 9.8* 9.8* 8.9* 8.9* 8.2* 8.2* 7.6* 7.6* 7.1* 7.1* 6.6* 6.6* 5.7* 5.7* 20.82

11.1* 11.1* 15.9* 15.9* 15.6* 15.6* 13.2* 13.2* 11.5* 11.5* 10.2* 10.2* 9.2* 9.2* 8.4* 8.4* 7.7* 7.7* 7.1* 7.1* 6.6* 6.6* 5.9* 5.9* 5.7* 5.7* 21.04

29.7* 29.7* 21.6* 21.6* 17.1* 17.1* 14.2* 14.2* 12.2* 12.2* 10.7* 10.7* 9.5* 9.5* 8.6* 8.6* 7.9* 7.9* 7.2* 7.2* 6.7* 6.7* 6.1* 6.1* 5.8* 5.8* 21.14

4.2* 4.2* 21.8* 21.8* 18.4* 18.4* 15.0* 15.0* 12.7* 12.7* 11.1* 11.1* 9.8* 9.8* 8.8* 8.8* 8.0* 8.0* 7.3* 7.3* 6.7* 6.7* 6.0* 6.0* 5.9* 5.9* 21.14

2.8* 2.8* 8.7* 8.7* 19.4* 19.4* 15.7* 15.7* 13.2* 13.2* 11.4* 11.4* 10.1* 10.1* 9.0* 9.0* 8.1* 8.1* 7.3* 7.3* 6.6* 6.6* 5.9* 5.9* 5.9* 5.9* 21.03

3.1* 3.1* 6.9* 6.9* 15.4* 15.4* 16.2* 16.2* 13.6* 13.6* 11.7* 11.7* 10.2* 10.2* 9.1* 9.1* 8.1* 8.1* 7.3* 7.3* 6.5* 6.5* 5.8* 5.8* 20.81

3.9* 3.9* 6.9* 6.9* 12.6* 12.6* 16.3* 16.3* 13.7* 13.7* 11.8* 11.8* 10.3* 10.3* 9.1* 9.1* 8.1* 8.1* 7.2* 7.2* 6.3* 6.3* 5.7* 5.7* 20.39

7.4* 7.4* 12.0* 12.0* 16.2* 16.2* 13.6* 13.6* 11.7* 11.7* 10.2* 10.2* 9.0* 9.0* 7.9* 7.9* 7.0* 7.0* 6.1* 6.1* 19.26

12.2* 12.2* 15.7* 15.7* 13.3* 13.3* 11.4* 11.4* 9.9* 9.9* 8.7* 8.7* 7.6* 7.6* 6.8* 6.8* 17.53

12.6* 12.6* 10.8* 10.8* 9.4* 9.4* 8.9* 8.9* 14.07

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity

R 954 C Litronic High Rise 9

Industrial Attachment

with Industrial-Type Gooseneck Boom 11.50 m

m

-10

-20

-30

ft

80

24

22

70

20

60

18

16

50

14

40

12

10

30

8

20

6

4

10

2

0

-2

-4

-6

-8

-10

-12

1

3

2

4

1618202224

m024614 812 10

Attachment Envelope

Kinematic variants 3C/3D

1 with industrial stick 9.00 m (3D) 2 with industrial stick 9.00 m and grapple model 72 C (3D) 3 with industrial stick 9.00 m (3C) 4 with industrial stick 9.00 m and grapple model 72 C (3C)

Operating Weight and Ground Pressure

Operating weight includes basic machine with hydraulic cab elevation parallelogram + intermediate piece 0.5 m, counterweight 14.5 t, industrial-type gooseneck boom 11.50 m, industrial stick 9.00 m and grapple model 72 C with 5 semi-closed tines 1.20 m

Undercarriage HR

Pad width mm 750 Weight kg 97,200 Ground pressure kg/cm

3

.

2

1.01

-10

-20

-30

5080

m

ft

80

24

22

70

20

60

18

16

50

14

40

12

10

30

8

20

6

4

10

2

0

-2

-4

-6

-8

-10

1

3

2

4

1618202224

ft0102030406070

Attachment Envelope

Kinematic variants 3C/3D

1 with industrial stick 10.00 m (3D) 2 with industrial stick 10.00 m and grapple model 72 C (3D) 3 with industrial stick 10.00 m (3C) 4 with industrial stick 10.00 m and grapple model 72 C (3C)

Operating Weight and Ground Pressure

Operating weight includes basic machine with hydraulic cab elevation parallelogram + intermediate piece 0.5 m, counterweight 14.5 t, industrial-type gooseneck boom 11.50 m, industrial stick 10.00 m and grapple model 72 C with 5 semi-closed tines 1.20 m

Undercarriage HR

Pad width mm 750 Weight kg 97,600 Ground pressure kg/cm

m024614 812 10

3

.

2

1.02

10 R 954 C Litronic High Rise

5080

ft0102030406070

Lift Capacities

with Industrial-Type Gooseneck Boom 11.50 m

Industrial Stick 9.00 m (Variant 3C)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

carriage

m

7.1* 7.1* 13.13

6.7* 6.7* 6.7* 6.7* 14.63

6.6* 6.6* 6.5* 6.5* 6.5* 6.5* 15.84

6.6* 6.6* 6.4* 6.4* 6.3* 6.3* 6.3* 6.3* 16.83

6.7* 6.7* 6.5* 6.5* 6.3* 6.3* 6.2* 6.2* 17.63

6.9* 6.9* 6.6* 6.6* 6.4* 6.4* 6.2* 6.2* 6.2* 6.2* 18.27

7.7* 7.7* 7.2* 7.2* 6.8* 6.8* 6.5* 6.5* 6.3* 6.3* 6.2* 6.2* 18.77

8.9* 8.9* 8.2* 8.2* 7.6* 7.6* 7.1* 7.1* 6.7* 6.7* 6.4* 6.4* 6.3* 6.3* 19.13

13.0* 13.0* 11.1* 11.1* 9.7* 9.7* 8.7* 8.7* 8.0* 8.0* 7.4* 7.4* 6.9* 6.9* 6.6* 6.6* 6.3* 6.3* 19.37

12.0* 12.0* 19.0* 19.0* 14.8* 14.8* 12.2* 12.2* 10.5* 10.5* 9.3* 9.3* 8.4* 8.4* 7.7* 7.7* 7.2* 7.2* 6.7* 6.7* 6.4* 6.4* 19.48

5.0* 5.0* 14.5* 14.5* 16.5* 16.5* 13.4* 13.4* 11.3* 11.3* 9.9* 9.9* 8.8* 8.8* 8.0* 8.0* 7.4* 7.4* 6.9* 6.9* 6.5* 6.5* 19.48

4.4* 4.4* 9.4* 9.4* 17.9* 17.9* 14.4* 14.4* 12.1* 12.1* 10.5* 10.5* 9.3* 9.3* 8.4* 8.4* 7.7* 7.7* 7.1* 7.1* 6.7* 6.7* 19.36

4.8* 4.8* 8.4* 8.4* 15.3* 15.3* 15.2* 15.2* 12.7* 12.7* 10.9* 10.9* 9.6* 9.6* 8.6* 8.6* 7.9* 7.9* 7.2* 7.2* 6.8* 6.8* 19.12

5.6* 5.6* 8.4* 8.4* 13.6* 13.6* 15.8* 15.8* 13.2* 13.2* 11.3* 11.3* 9.9* 9.9* 8.9* 8.9* 8.0* 8.0* 7.3* 7.3* 7.0* 7.0* 18.76

6.5* 6.5* 8.9* 8.9* 13.1* 13.1* 16.1* 16.1* 13.5* 13.5* 11.6* 11.6* 10.1* 10.1* 9.0* 9.0* 8.1* 8.1* 7.3* 7.3* 7.2* 7.2* 18.26

7.3* 7.3* 9.5* 9.5* 13.3* 13.3* 16.2* 16.2* 13.6* 13.6* 11.7* 11.7* 10.2* 10.2* 9.0* 9.0* 8.0* 8.0* 7.4* 7.4* 17.62

10.3* 10.3* 13.9* 13.9* 15.9* 15.9* 13.5* 13.5* 11.6* 11.6* 10.1* 10.1* 8.9* 8.9* 7.8* 7.8* 7.5* 7.5* 16.82

14.8* 14.8* 15.3* 15.3* 13.0* 13.0* 11.2* 11.2* 9.7* 9.7* 8.4* 8.4* 7.7* 7.7* 15.83

Industrial Stick 10.00 m (Variant 3C)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

The lift capacities are stated in metric tonnes (t) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities are valid for 750 mm track flat pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic check valves on the hoist cylinders, when they are used for lifting operations which require the use of lifting accessories.

carriage

m

6.2* 6.2* 14.49

6.0* 6.0* 5.9* 5.9* 15.86

5.8* 5.8* 5.8* 5.8* 5.8* 5.8* 16.98

5.8* 5.8* 5.7* 5.7* 5.7* 5.7* 17.91

5.9* 5.9* 5.7* 5.7* 5.6* 5.6* 5.6* 5.6* 18.66

6.0* 6.0* 5.8* 5.8* 5.7* 5.7* 5.6* 5.6* 19.26

6.6* 6.6* 6.2* 6.2* 6.0* 6.0* 5.8* 5.8* 5.6* 5.6* 5.6* 5.6* 19.73

7.4* 7.4* 6.9* 6.9* 6.5* 6.5* 6.2* 6.2* 5.9* 5.9* 5.7* 5.7* 5.6* 5.6* 20.08

8.8* 8.8* 8.0* 8.0* 7.3* 7.3* 6.8* 6.8* 6.4* 6.4* 6.1* 6.1* 5.8* 5.8* 5.7* 5.7* 20.31

16.7* 16.7* 13.2* 13.2* 11.1* 11.1* 9.6* 9.6* 8.6* 8.6* 7.8* 7.8* 7.1* 7.1* 6.7* 6.7* 6.3* 6.3* 5.9* 5.9* 5.8* 5.8* 20.42

9.0* 9.0* 19.5* 19.5* 15.0* 15.0* 12.3* 12.3* 10.5* 10.5* 9.2* 9.2* 8.2* 8.2* 7.5* 7.5* 6.9* 6.9* 6.5* 6.5* 6.1* 6.1* 5.9* 5.9* 20.42

5.6* 5.6* 12.7* 12.7* 16.5* 16.5* 13.4* 13.4* 11.2* 11.2* 9.8* 9.8* 8.7* 8.7* 7.8* 7.8* 7.2* 7.2* 6.6* 6.6* 6.2* 6.2* 6.0* 6.0* 20.30

5.2* 5.2* 9.5* 9.5* 17.8* 17.8* 14.3* 14.3* 11.9* 11.9* 10.3* 10.3* 9.1* 9.1* 8.1* 8.1* 7.4* 7.4* 6.8* 6.8* 6.3* 6.3* 6.2* 6.2* 20.08

5.6* 5.6* 8.8* 8.8* 14.9* 14.9* 15.0* 15.0* 12.5* 12.5* 10.7* 10.7* 9.4* 9.4* 8.4* 8.4* 7.6* 7.6* 7.0* 7.0* 6.4* 6.4* 6.3* 6.3* 19.73

6.2* 6.2* 8.8* 8.8* 13.5* 13.5* 15.5* 15.5* 12.9* 12.9* 11.1* 11.1* 9.7* 9.7* 8.6* 8.6* 7.8* 7.8* 7.0* 7.0* 6.5* 6.5* 19.26

6.9* 6.9* 9.2* 9.2* 13.2* 13.2* 15.7* 15.7* 13.2* 13.2* 11.3* 11.3* 9.9* 9.9* 8.7* 8.7* 7.8* 7.8* 7.0* 7.0* 6.7* 6.7* 18.65

7.5* 7.5* 9.7* 9.7* 13.4* 13.4* 15.7* 15.7* 13.2* 13.2* 11.3* 11.3* 9.9* 9.9* 8.7* 8.7* 7.7* 7.7* 6.9* 6.9* 17.89

10.3* 10.3* 14.0* 14.0* 15.3* 15.3* 13.0* 13.0* 11.1* 11.1* 9.7* 9.7* 8.5* 8.5* 7.4* 7.4* 7.0* 7.0* 16.97

14.6* 14.6* 12.4* 12.4* 10.6* 10.6* 9.2* 9.2* 7.9* 7.9* 7.8* 7.8* 15.14

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity

R 954 C Litronic High Rise 11

Lift Capacities

with Industrial-Type Gooseneck Boom 11.50 m

Industrial Stick 9.00 m (Variant 3D)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

carriage

m

9.1* 9.1* 8.0* 8.0* 11.22

8.4* 8.4* 7.4* 7.4* 13.13

8.2* 8.2* 7.8* 7.8* 7.0* 7.0* 14.63

8.1* 8.1* 7.7* 7.7* 7.4* 7.4* 6.8* 6.8* 15.84

8.1* 8.1* 7.7* 7.7* 7.3* 7.3* 7.1* 7.1* 6.6* 6.6* 16.83

8.9* 8.9* 8.3* 8.3* 7.8* 7.8* 7.4* 7.4* 7.1* 7.1* 6.6* 6.6* 17.63

9.2* 9.2* 8.5* 8.5* 8.0* 8.0* 7.5* 7.5* 7.1* 7.1* 6.8* 6.8* 6.6* 6.6* 18.27

10.8* 10.8* 9.7* 9.7* 8.9* 8.9* 8.2* 8.2* 7.7* 7.7* 7.2* 7.2* 6.9* 6.9* 6.6* 6.6* 18.77

13.5* 13.5* 11.7* 11.7* 10.3* 10.3* 9.3* 9.3* 8.5* 8.5* 7.9* 7.9* 7.4* 7.4* 6.9* 6.9* 6.7* 6.7* 19.13

25.0* 25.0* 18.6* 18.6* 15.0* 15.0* 12.7* 12.7* 11.0* 11.0* 9.8* 9.8* 8.9* 8.9* 8.1* 8.1* 7.5* 7.5* 7.1* 7.1* 6.7* 6.7* 19.37

12.0* 12.0* 21.3* 21.3* 16.6* 16.6* 13.7* 13.7* 11.7* 11.7* 10.3* 10.3* 9.2* 9.2* 8.4* 8.4* 7.7* 7.7* 7.2* 7.2* 6.7* 6.7* 19.48

5.0* 5.0* 14.5* 14.5* 18.0* 18.0* 14.6* 14.6* 12.4* 12.4* 10.8* 10.8* 9.6* 9.6* 8.7* 8.7* 7.9* 7.9* 7.3* 7.3* 6.7* 6.7* 19.48

4.4* 4.4* 9.4* 9.4* 19.1* 19.1* 15.4* 15.4* 13.0* 13.0* 11.2* 11.2* 9.9* 9.9* 8.9* 8.9* 8.1* 8.1* 7.4* 7.4* 6.8* 6.8* 19.36

4.8* 4.8* 8.4* 8.4* 15.3* 15.3* 16.0* 16.0* 13.4* 13.4* 11.5* 11.5* 10.1* 10.1* 9.0* 9.0* 8.2* 8.2* 7.4* 7.4* 6.9* 6.9* 19.12

5.6* 5.6* 8.4* 8.4* 13.6* 13.6* 16.3* 16.3* 13.7* 13.7* 11.8* 11.8* 10.3* 10.3* 9.1* 9.1* 8.2* 8.2* 7.4* 7.4* 6.9* 6.9* 18.76

6.5* 6.5* 8.9* 8.9* 13.1* 13.1* 16.3* 16.3* 13.7* 13.7* 11.8* 11.8* 10.3* 10.3* 9.1* 9.1* 8.1* 8.1* 7.2* 7.2* 7.0* 7.0* 18.26

9.5* 9.5* 13.3* 13.3* 16.0* 16.0* 13.6* 13.6* 11.7* 11.7* 10.2* 10.2* 8.9* 8.9* 7.9* 7.9* 7.1* 7.1* 17.62

15.4* 15.4* 13.1* 13.1* 11.3* 11.3* 9.8* 9.8* 8.5* 8.5* 8.1* 8.1* 15.57

Industrial Stick 10.00 m (Variant 3D)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

The lift capacities are stated in metric tonnes (t) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities are valid for 750 mm track flat pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic check valves on the hoist cylinders, when they are used for lifting operations which require the use of lifting accessories.

carriage

m

7.6* 7.6* 7.5* 7.5* 10.61

7.8* 7.8* 6.7* 6.7* 12.80

7.7* 7.7* 7.4* 7.4* 6.3* 6.3* 14.49

7.5* 7.5* 7.2* 7.2* 6.9* 6.9* 6.0* 6.0* 15.86

7.4* 7.4* 7.1* 7.1* 6.8* 6.8* 6.6* 6.6* 5.8* 5.8* 16.98

7.5* 7.5* 7.1* 7.1* 6.8* 6.8* 6.5* 6.5* 5.7* 5.7* 17.91

7.6* 7.6* 7.2* 7.2* 6.8* 6.8* 6.5* 6.5* 6.3* 6.3* 5.7* 5.7* 18.66

7.9* 7.9* 7.4* 7.4* 7.0* 7.0* 6.6* 6.6* 6.3* 6.3* 5.7* 5.7* 19.26

9.0* 9.0* 8.2* 8.2* 7.6* 7.6* 7.1* 7.1* 6.7* 6.7* 6.4* 6.4* 6.1* 6.1* 5.7* 5.7* 19.73

10.7* 10.7* 9.5* 9.5* 8.7* 8.7* 7.9* 7.9* 7.4* 7.4* 6.9* 6.9* 6.5* 6.5* 6.2* 6.2* 5.8* 5.8* 20.08

13.6* 13.6* 11.6* 11.6* 10.2* 10.2* 9.1* 9.1* 8.3* 8.3* 7.6* 7.6* 7.1* 7.1* 6.6* 6.6* 6.2* 6.2* 5.9* 5.9* 20.31

26.4* 26.4* 19.2* 19.2* 15.2* 15.2* 12.7* 12.7* 10.9* 10.9* 9.6* 9.6* 8.7* 8.7* 7.9* 7.9* 7.3* 7.3* 6.8* 6.8* 6.3* 6.3* 6.1* 6.1* 20.42

9.0* 9.0* 21.6* 21.6* 16.7* 16.7* 13.7* 13.7* 11.6* 11.6* 10.1* 10.1* 9.0* 9.0* 8.2* 8.2* 7.5* 7.5* 6.9* 6.9* 6.4* 6.4* 6.1* 6.1* 20.42

5.6* 5.6* 12.7* 12.7* 18.0* 18.0* 14.6* 14.6* 12.3* 12.3* 10.6* 10.6* 9.4* 9.4* 8.4* 8.4* 7.7* 7.7* 7.0* 7.0* 6.5* 6.5* 6.2* 6.2* 20.30

5.2* 5.2* 9.5* 9.5* 18.9* 18.9* 15.2* 15.2* 12.8* 12.8* 11.0* 11.0* 9.7* 9.7* 8.6* 8.6* 7.8* 7.8* 7.1* 7.1* 6.5* 6.5* 6.2* 6.2* 20.08

5.6* 5.6* 8.8* 8.8* 14.9* 14.9* 15.7* 15.7* 13.1* 13.1* 11.3* 11.3* 9.9* 9.9* 8.8* 8.8* 7.9* 7.9* 7.1* 7.1* 6.4* 6.4* 6.3* 6.3* 19.73

6.2* 6.2* 8.8* 8.8* 13.5* 13.5* 15.9* 15.9* 13.3* 13.3* 11.4* 11.4* 10.0* 10.0* 8.8* 8.8* 7.9* 7.9* 7.1* 7.1* 6.4* 6.4* 19.26

6.9* 6.9* 9.2* 9.2* 13.2* 13.2* 15.8* 15.8* 13.3* 13.3* 11.4* 11.4* 10.0* 10.0* 8.8* 8.8* 7.8* 7.8* 6.9* 6.9* 6.5* 6.5* 18.65

9.7* 9.7* 13.4* 13.4* 15.4* 15.4* 13.0* 13.0* 11.2* 11.2* 9.8* 9.8* 8.5* 8.5* 7.5* 7.5* 6.7* 6.7* 17.56

12.5* 12.5* 10.7* 10.7* 9.3* 9.3* 8.6* 8.6* 14.36

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity

12 R 954 C Litronic High Rise

Industrial Attachment

with Industrial-Type Straight Boom 12.50 m

m

80

70

60

50

40

30

20

10

-10

-20

-30

ft

26

24

22

20

18

16

14

12

10

8

6

4

2

0

-2

-4

-6

-8

1

2

3

4

1618202224

m024614 812 10

Attachment Envelope

Kinematic variant 2A

1 with industrial stick 9.00 m 2 with industrial stick 10.00 m 3 with industrial stick 9.00 m and grapple model 72 C 4 with industrial stick 10.00 m and grapple model 72 C

Operating Weight and Ground Pressure

Operating weight includes basic machine with hydraulic cab elevation parallelogram + intermediate piece 0.5 m, counterweight 14.5 t, industrial-type straight boom 12.50 m, industrial stick 9.00 m and grapple model 72 C with 5 semi-closed tines 1.20 m

Undercarriage HR

Pad width mm 750 Weight kg 97,300 Ground pressure kg/cm

Operating weight includes basic machine with hydraulic cab elevation parallelogram + intermediate piece 0.5 m, counterweight 14.5 t, industrial-type straight boom 12.50 m, industrial stick 10.00 m and grapple model 72 C with 5 semi-closed tines 1.20 m

Undercarriage HR

3

.

2

1.01

3

.

5080

ft0102030406070

Pad width mm 750 Weight kg 97,700 Ground pressure kg/cm

2

1.02

R 954 C Litronic High Rise 13

Lift Capacities

with Industrial-Type Straight Boom 12.50 m

Industrial Stick 9.00 m (Variant 2A)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

carriage

m

12.4* 12.4* 10.7* 10.7* 8.71

12.3* 12.3* 10.6* 10.6* 9.0* 9.0* 11.49

13.1* 13.1* 12.1* 12.1* 10.6* 10.6* 8.2* 8.2* 8.1* 8.1* 13.53

13.6* 13.6* 12.9* 12.9* 11.4* 11.4* 10.2* 10.2* 7.9* 7.9* 7.6* 7.6* 15.15

12.9* 12.9* 11.4* 11.4* 10.1* 10.1* 9.0* 9.0* 7.2* 7.2* 16.47

12.8* 12.8* 11.3* 11.3* 10.1* 10.1* 9.0* 9.0* 8.1* 8.1* 6.9* 6.9* 17.56

14.4* 14.4* 12.9* 12.9* 11.3* 11.3* 10.1* 10.1* 9.0* 9.0* 8.1* 8.1* 7.1* 7.1* 6.8* 6.8* 18.47

15.0* 15.0* 13.0* 13.0* 11.4* 11.4* 10.1* 10.1* 9.0* 9.0* 8.0* 8.0* 7.1* 7.1* 6.3* 6.3* 19.21

15.0* 15.0* 15.2* 15.2* 13.1* 13.1* 11.5* 11.5* 10.1* 10.1* 9.0* 9.0* 8.0* 8.0* 7.1* 7.1* 6.1* 6.1* 5.9* 5.9* 19.81

14.7* 14.7* 17.0* 17.0* 15.5* 15.5* 13.2* 13.2* 11.5* 11.5* 10.1* 10.1* 9.0* 9.0* 7.9* 7.9* 7.0* 7.0* 6.1* 6.1* 5.5* 5.5* 20.28

16.0* 16.0* 20.3* 20.3* 19.0* 19.0* 15.7* 15.7* 13.4* 13.4* 11.5* 11.5* 10.1* 10.1* 8.9* 8.9* 7.9* 7.9* 6.9* 6.9* 6.0* 6.0* 5.1* 5.1* 20.63

19.5* 19.5* 24.6* 24.6* 19.3* 19.3* 15.9* 15.9* 13.4* 13.4* 11.5* 11.5* 10.0* 10.0* 8.8* 8.8* 7.7* 7.7* 6.8* 6.8* 5.8* 5.8* 4.7* 4.7* 20.87

11.2* 11.2* 19.3* 19.3* 15.8* 15.8* 13.2* 13.2* 11.3* 11.3* 9.8* 9.8* 8.6* 8.6* 7.5* 7.5* 6.5* 6.5* 5.5* 5.5* 4.3* 4.3* 20.99

4.6* 4.6* 16.4* 16.4* 15.4* 15.4* 12.9* 12.9* 11.1* 11.1* 9.6* 9.6* 8.3* 8.3* 7.2* 7.2* 6.2* 6.2* 5.2* 5.2* 3.9* 3.9* 3.9* 3.9* 21.01

0.5* 0.5* 3.7* 3.7* 10.0* 10.0* 14.6* 14.6* 12.3* 12.3* 10.6* 10.6* 9.1* 9.1* 7.9* 7.9* 6.8* 6.8* 5.8* 5.8* 4.8* 4.8* 3.5* 3.5* 20.91

1.5* 1.5* 4.1* 4.1* 8.5* 8.5* 13.4* 13.4* 11.5* 11.5* 9.9* 9.9* 8.5* 8.5* 7.4* 7.4* 6.3* 6.3* 5.3* 5.3* 4.2* 4.2* 3.0* 3.0* 20.71

4.9* 4.9* 8.5* 8.5* 11.8* 11.8* 10.3* 10.3* 9.0* 9.0* 7.8* 7.8* 6.7* 6.7* 5.6* 5.6* 4.6* 4.6* 3.4* 3.4* 2.6* 2.6* 20.20

9.0* 9.0* 9.9* 9.9* 8.9* 8.9* 7.8* 7.8* 6.7* 6.7* 5.7* 5.7* 4.7* 4.7* 3.7* 3.7* 2.9* 2.9* 18.93

7.7* 7.7* 7.1* 7.1* 6.3* 6.3* 5.4* 5.4* 4.6* 4.6* 3.6* 3.6* 3.4* 3.4* 16.79

Industrial Stick 10.00 m (Variant 2A)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

The lift capacities are stated in metric tonnes (t) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities are valid for 750 mm track flat pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic check valves on the hoist cylinders, when they are used for lifting operations which require the use of lifting accessories.

carriage

m

10.7* 10.7* 10.6* 10.6* 7.57

10.9* 10.9* 9.1* 9.1* 8.5* 8.5* 10.87

11.7* 11.7* 10.7* 10.7* 9.2* 9.2* 7.5* 7.5* 13.18

11.4* 11.4* 10.5* 10.5* 9.1* 9.1* 6.9* 6.9* 15.00

11.8* 11.8* 11.1* 11.1* 9.9* 9.9* 8.8* 8.8* 6.5* 6.5* 16.47

12.1* 12.1* 11.0* 11.0* 9.8* 9.8* 8.8* 8.8* 7.9* 7.9* 6.2* 6.2* 17.69

12.4* 12.4* 11.0* 11.0* 9.8* 9.8* 8.8* 8.8* 7.9* 7.9* 7.0* 7.0* 6.0* 6.0* 18.71

12.5* 12.5* 11.0* 11.0* 9.8* 9.8* 8.8* 8.8* 7.9* 7.9* 7.0* 7.0* 6.0* 6.0* 5.8* 5.8* 19.56

12.6* 12.6* 11.1* 11.1* 9.8* 9.8* 8.8* 8.8* 7.8* 7.8* 7.0* 7.0* 6.2* 6.2* 5.7* 5.7* 20.26

13.4* 13.4* 12.7* 12.7* 11.1* 11.1* 9.8* 9.8* 8.8* 8.8* 7.8* 7.8* 7.0* 7.0* 6.1* 6.1* 5.3* 5.3* 20.83

13.2* 13.2* 14.7* 14.7* 12.9* 12.9* 11.2* 11.2* 9.9* 9.9* 8.7* 8.7* 7.8* 7.8* 6.9* 6.9* 6.1* 6.1* 5.2* 5.2* 4.9* 4.9* 21.28

13.1* 13.1* 15.8* 15.8* 15.3* 15.3* 13.0* 13.0* 11.3* 11.3* 9.9* 9.9* 8.7* 8.7* 7.7* 7.7* 6.8* 6.8* 6.0* 6.0* 5.1* 5.1* 4.6* 4.6* 21.61

19.8* 19.8* 22.9* 22.9* 18.9* 18.9* 15.5* 15.5* 13.1* 13.1* 11.3* 11.3* 9.8* 9.8* 8.6* 8.6* 7.6* 7.6* 6.7* 6.7* 5.8* 5.8* 4.9* 4.9* 4.3* 4.3* 21.84

6.1* 6.1* 24.3* 24.3* 19.0* 19.0* 15.5* 15.5* 13.1* 13.1* 11.2* 11.2* 9.7* 9.7* 8.5* 8.5* 7.4* 7.4* 6.5* 6.5* 5.6* 5.6* 4.7* 4.7* 3.9* 3.9* 21.96

1.4* 1.4* 8.5* 8.5* 18.7* 18.7* 15.3* 15.3* 12.8* 12.8* 11.0* 11.0* 9.5* 9.5* 8.3* 8.3* 7.2* 7.2* 6.3* 6.3* 5.3* 5.3* 4.4* 4.4* 3.5* 3.5* 21.97

1.3* 1.3* 5.1* 5.1* 13.9* 13.9* 14.7* 14.7* 12.4* 12.4* 10.6* 10.6* 9.1* 9.1* 7.9* 7.9* 6.9* 6.9* 5.9* 5.9* 5.0* 5.0* 3.9* 3.9* 3.1* 3.1* 21.88

1.9* 1.9* 4.6* 4.6* 10.0* 10.0* 13.8* 13.8* 11.7* 11.7* 10.0* 10.0* 8.7* 8.7* 7.5* 7.5* 6.4* 6.4* 5.5* 5.5* 4.5* 4.5* 3.4* 3.4* 2.7* 2.7* 21.69

2.8* 2.8* 5.0* 5.0* 9.0* 9.0* 12.5* 12.5* 10.7* 10.7* 9.3* 9.3* 8.0* 8.0* 6.9* 6.9* 5.9* 5.9* 4.9* 4.9* 3.9* 3.9* 2.6* 2.6* 2.2* 2.2* 21.38

5.7* 5.7* 9.0* 9.0* 10.9* 10.9* 9.5* 9.5* 8.2* 8.2* 7.1* 7.1* 6.1* 6.1* 5.1* 5.1* 4.1* 4.1* 3.0* 3.0* 2.3* 2.3* 20.31

9.5* 9.5* 8.9* 8.9* 7.9* 7.9* 6.9* 6.9* 6.0* 6.0* 5.1* 5.1* 4.1* 4.1* 3.1* 3.1* 2.6* 2.6* 18.69

6.0* 6.0* 5.4* 5.4* 4.6* 4.6* 3.8* 3.8* 3.4* 3.4* 15.75

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity

14 R 954 C Litronic High Rise

Industrial Attachment

with Industrial-Type Straight Boom 12.50 m

m

80

70

60

50

40

30

20

10

-10

-20

-30

ft

26

24

22

20

18

16

14

12

10

8

6

4

2

0

-2

-4

-6

-8

-10

1

2

3

4

1618202224

m024614 812 10

Attachment Envelope

Kinematic variants 3A/3B

1 with industrial stick 9.00 m (3B) 2 with industrial stick 9.00 m and grapple model 72 C (3B) 3 with industrial stick 9.00 m (3A) 4 with industrial stick 9.00 m and grapple model 72 C (3A)

Operating Weight and Ground Pressure

Operating weight includes basic machine with hydraulic cab elevation parallelogram + intermediate piece 0.5 m, counterweight 14.5 t, industrial-type straight boom 12.50 m, industrial stick 9.00 m and grapple model 72 C with 5 semi-closed tines 1.20 m

Undercarriage HR

Pad width mm 750 Weight kg 97,300 Ground pressure kg/cm

3

.

2

1.01

80

70

60

50

40

30

20

10

-10

-20

-30

5080

m

ft

26

24

22

20

18

16

14

12

10

8

6

4

ft0102030406070

Attachment Envelope

Kinematic variants 3A/3B

1 with industrial stick 10.00 m (3B) 2 with industrial stick 10.00 m and grapple model 72 C (3B) 3 with industrial stick 10.00 m (3A) 4 with industrial stick 10.00 m and grapple model 72 C (3A)

Operating Weight and Ground Pressure

Operating weight includes basic machine with hydraulic cab elevation parallelogram + intermediate piece 0.5 m, counterweight 14.5 t, industrial-type straight boom 12.50 m, industrial stick 10.00 m and grapple model 72 C with 5 semi-closed tines 1.20 m

3

.

Undercarriage HR

2

0

-2

-4

-6

-8

-10

1

2

3

4

1618202224

024614 812 10

m

Pad width mm 750 Weight kg 97,700 Ground pressure kg/cm

2

1.02

5080

0102030406070

ft

R 954 C Litronic High Rise 15

Lift Capacities

with Industrial-Type Straight Boom 12.50 m

Industrial Stick 9.00 m (Variant 3A)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

carriage

m

8.9* 8.9* 11.98

8.9* 8.9* 8.0* 8.0* 13.95

9.4* 9.4* 8.6* 8.6* 7.5* 7.5* 15.51

9.3* 9.3* 8.6* 8.6* 7.9* 7.9* 7.1* 7.1* 16.80

9.3* 9.3* 8.6* 8.6* 8.0* 8.0* 6.9* 6.9* 17.86

9.3* 9.3* 8.6* 8.6* 7.9* 7.9* 7.4* 7.4* 6.7* 6.7* 18.74

9.4* 9.4* 8.6* 8.6* 7.9* 7.9* 7.3* 7.3* 6.6* 6.6* 19.46

10.6* 10.6* 9.6* 9.6* 8.7* 8.7* 8.0* 8.0* 7.3* 7.3* 6.8* 6.8* 6.5* 6.5* 20.04

12.3* 12.3* 10.9* 10.9* 9.7* 9.7* 8.8* 8.8* 8.0* 8.0* 7.4* 7.4* 6.7* 6.7* 6.3* 6.3* 20.49

17.7* 17.7* 14.8* 14.8* 12.7* 12.7* 11.1* 11.1* 9.9* 9.9* 8.9* 8.9* 8.1* 8.1* 7.4* 7.4* 6.7* 6.7* 6.1* 6.1* 20.82

7.0* 7.0* 23.9* 23.9* 18.7* 18.7* 15.4* 15.4* 13.1* 13.1* 11.4* 11.4* 10.1* 10.1* 9.0* 9.0* 8.2* 8.2* 7.4* 7.4* 6.7* 6.7* 5.9* 5.9* 5.9* 5.9* 21.04

7.7* 7.7* 19.5* 19.5* 15.9* 15.9* 13.4* 13.4* 11.6* 11.6* 10.2* 10.2* 9.1* 9.1* 8.2* 8.2* 7.4* 7.4* 6.6* 6.6* 5.8* 5.8* 5.7* 5.7* 21.15

3.8* 3.8* 13.0* 13.0* 16.2* 16.2* 13.6* 13.6* 11.7* 11.7* 10.3* 10.3* 9.1* 9.1* 8.1* 8.1* 7.3* 7.3* 6.5* 6.5* 5.6* 5.6* 5.5* 5.5* 21.15

0.4* 0.4* 3.3* 3.3* 8.8* 8.8* 16.2* 16.2* 13.7* 13.7* 11.8* 11.8* 10.3* 10.3* 9.1* 9.1* 8.1* 8.1* 7.2* 7.2* 6.3* 6.3* 5.3* 5.3* 5.3* 5.3* 21.04

1.5* 1.5* 3.9* 3.9* 7.9* 7.9* 15.9* 15.9* 13.5* 13.5* 11.6* 11.6* 10.1* 10.1* 8.9* 8.9* 7.9* 7.9* 6.9* 6.9* 6.0* 6.0* 5.0* 5.0* 20.82

2.8* 2.8* 4.7* 4.7* 8.1* 8.1* 14.4* 14.4* 13.0* 13.0* 11.2* 11.2* 9.8* 9.8* 8.6* 8.6* 7.6* 7.6* 6.6* 6.6* 5.6* 5.6* 4.7* 4.7* 20.49

5.8* 5.8* 8.7* 8.7* 14.1* 14.1* 12.3* 12.3* 10.7* 10.7* 9.3* 9.3* 8.1* 8.1* 7.1* 7.1* 6.1* 6.1* 4.9* 4.9* 4.4* 4.4* 20.03

9.6* 9.6* 12.9* 12.9* 11.3* 11.3* 9.9* 9.9* 8.6* 8.6* 7.5* 7.5* 6.4* 6.4* 5.3* 5.3* 4.4* 4.4* 19.06

11.2* 11.2* 9.9* 9.9* 8.7* 8.7* 7.6* 7.6* 6.5* 6.5* 5.4* 5.4* 5.0* 5.0* 17.03

Industrial Stick 10.00 m (Variant 3A)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

The lift capacities are stated in metric tonnes (t) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities are valid for 750 mm track flat pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic check valves on the hoist cylinders, when they are used for lifting operations which require the use of lifting accessories.

carriage

m

8.3* 8.3* 11.41

7.6* 7.6* 7.4* 7.4* 13.63

9.1* 9.1* 7.5* 7.5* 6.8* 6.8* 15.38

8.3* 8.3* 7.1* 7.1* 6.4* 6.4* 16.82

8.2* 8.2* 7.6* 7.6* 6.1* 6.1* 6.1* 6.1* 18.00

8.2* 8.2* 7.6* 7.6* 7.0* 7.0* 5.9* 5.9* 19.00

8.2* 8.2* 7.6* 7.6* 7.0* 7.0* 6.5* 6.5* 5.8* 5.8* 19.83

9.0* 9.0* 8.2* 8.2* 7.6* 7.6* 7.0* 7.0* 6.5* 6.5* 5.7* 5.7* 20.51

9.1* 9.1* 8.3* 8.3* 7.6* 7.6* 7.0* 7.0* 6.5* 6.5* 5.8* 5.8* 5.7* 5.7* 21.06

10.4* 10.4* 9.3* 9.3* 8.4* 8.4* 7.7* 7.7* 7.1* 7.1* 6.5* 6.5* 5.9* 5.9* 5.7* 5.7* 21.49

12.1* 12.1* 10.6* 10.6* 9.5* 9.5* 8.6* 8.6* 7.8* 7.8* 7.1* 7.1* 6.5* 6.5* 5.9* 5.9* 5.5* 5.5* 21.81

22.4* 22.4* 17.7* 17.7* 14.7* 14.7* 12.5* 12.5* 10.9* 10.9* 9.7* 9.7* 8.7* 8.7* 7.8* 7.8* 7.1* 7.1* 6.5* 6.5* 5.8* 5.8* 5.4* 5.4* 22.01

3.4* 3.4* 24.0* 24.0* 18.7* 18.7* 15.3* 15.3* 12.9* 12.9* 11.2* 11.2* 9.8* 9.8* 8.8* 8.8* 7.9* 7.9* 7.1* 7.1* 6.4* 6.4* 5.8* 5.8* 5.2* 5.2* 22.12

0.9* 0.9* 6.6* 6.6* 19.3* 19.3* 15.7* 15.7* 13.2* 13.2* 11.4* 11.4* 9.9* 9.9* 8.8* 8.8* 7.9* 7.9* 7.1* 7.1* 6.4* 6.4* 5.6* 5.6* 5.0* 5.0* 22.12

1.1* 1.1* 4.4* 4.4* 11.7* 11.7* 15.9* 15.9* 13.3* 13.3* 11.4* 11.4* 10.0* 10.0* 8.8* 8.8* 7.8* 7.8* 7.0* 7.0* 6.2* 6.2* 5.5* 5.5* 4.8* 4.8* 22.01

1.8* 1.8* 4.3* 4.3* 9.0* 9.0* 15.8* 15.8* 13.3* 13.3* 11.4* 11.4* 9.9* 9.9* 8.7* 8.7* 7.7* 7.7* 6.9* 6.9* 6.0* 6.0* 5.2* 5.2* 4.6* 4.6* 21.80

2.7* 2.7* 4.8* 4.8* 8.5* 8.5* 15.3* 15.3* 13.0* 13.0* 11.1* 11.1* 9.7* 9.7* 8.5* 8.5* 7.5* 7.5* 6.6* 6.6* 5.7* 5.7* 4.8* 4.8* 4.3* 4.3* 21.48

3.7* 3.7* 5.6* 5.6* 8.7* 8.7* 14.5* 14.5* 12.4* 12.4* 10.7* 10.7* 9.3* 9.3* 8.2* 8.2* 7.1* 7.1* 6.2* 6.2* 5.3* 5.3* 4.1* 4.1* 4.0* 4.0* 21.05

6.4* 6.4* 9.3* 9.3* 13.5* 13.5* 11.6* 11.6* 10.1* 10.1* 8.8* 8.8* 7.6* 7.6* 6.6* 6.6* 5.7* 5.7* 4.6* 4.6* 3.7* 3.7* 20.42

10.1* 10.1* 12.0* 12.0* 10.5* 10.5* 9.1* 9.1* 8.0* 8.0* 6.9* 6.9* 5.9* 5.9* 4.8* 4.8* 4.1* 4.1* 18.86

9.0* 9.0* 7.9* 7.9* 6.8* 6.8* 5.8* 5.8* 5.1* 5.1* 16.11

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity

16 R 954 C Litronic High Rise

Lift Capacities

with Industrial-Type Straight Boom 12.50 m

Industrial Stick 9.00 m (Variant 3B)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

carriage

m

14.3* 14.3* 5.06

12.8* 12.8* 10.9* 10.9* 10.3* 10.3* 9.35

11.9* 11.9* 10.7* 10.7* 8.9* 8.9* 11.98

11.4* 11.4* 10.3* 10.3* 9.4* 9.4* 8.7* 8.7* 8.0* 8.0* 13.95

10.0* 10.0* 9.2* 9.2* 8.5* 8.5* 8.0* 8.0* 7.5* 7.5* 15.51

9.9* 9.9* 9.1* 9.1* 8.4* 8.4* 7.8* 7.8* 7.4* 7.4* 7.1* 7.1* 16.80

9.9* 9.9* 9.1* 9.1* 8.4* 8.4* 7.8* 7.8* 7.3* 7.3* 6.9* 6.9* 17.86

11.2* 11.2* 10.1* 10.1* 9.1* 9.1* 8.4* 8.4* 7.8* 7.8* 7.3* 7.3* 6.8* 6.8* 6.7* 6.7* 18.74

11.6* 11.6* 10.3* 10.3* 9.3* 9.3* 8.5* 8.5* 7.8* 7.8* 7.3* 7.3* 6.8* 6.8* 6.5* 6.5* 19.46

13.9* 13.9* 12.0* 12.0* 10.6* 10.6* 9.5* 9.5* 8.7* 8.7* 8.0* 8.0* 7.4* 7.4* 6.9* 6.9* 6.4* 6.4* 6.3* 6.3* 20.04

14.8* 14.8* 14.8* 14.8* 12.6* 12.6* 11.0* 11.0* 9.8* 9.8* 8.9* 8.9* 8.1* 8.1* 7.5* 7.5* 6.9* 6.9* 6.4* 6.4* 6.1* 6.1* 20.49

17.5* 17.5* 19.8* 19.8* 15.9* 15.9* 13.3* 13.3* 11.5* 11.5* 10.2* 10.2* 9.1* 9.1* 8.3* 8.3* 7.6* 7.6* 7.0* 7.0* 6.5* 6.5* 6.0* 6.0* 20.82

7.0* 7.0* 21.8* 21.8* 17.1* 17.1* 14.1* 14.1* 12.0* 12.0* 10.5* 10.5* 9.3* 9.3* 8.4* 8.4* 7.7* 7.7* 7.0* 7.0* 6.5* 6.5* 5.9* 5.9* 5.9* 5.9* 21.04

7.7* 7.7* 18.1* 18.1* 14.8* 14.8* 12.5* 12.5* 10.8* 10.8* 9.6* 9.6* 8.6* 8.6* 7.8* 7.8* 7.1* 7.1* 6.5* 6.5* 5.9* 5.9* 5.8* 5.8* 21.15

3.8* 3.8* 13.0* 13.0* 15.3* 15.3* 12.9* 12.9* 11.1* 11.1* 9.8* 9.8* 8.7* 8.7* 7.8* 7.8* 7.1* 7.1* 6.5* 6.5* 5.8* 5.8* 5.7* 5.7* 21.15

0.4* 0.4* 3.3* 3.3* 8.8* 8.8* 15.7* 15.7* 13.1* 13.1* 11.3* 11.3* 9.9* 9.9* 8.8* 8.8* 7.9* 7.9* 7.1* 7.1* 6.4* 6.4* 5.6* 5.6* 5.6* 5.6* 21.04

3.9* 3.9* 7.9* 7.9* 15.8* 15.8* 13.2* 13.2* 11.4* 11.4* 9.9* 9.9* 8.8* 8.8* 7.9* 7.9* 7.0* 7.0* 6.3* 6.3* 5.5* 5.5* 20.82

4.7* 4.7* 8.1* 8.1* 14.4* 14.4* 13.1* 13.1* 11.3* 11.3* 9.9* 9.9* 8.7* 8.7* 7.7* 7.7* 6.9* 6.9* 6.0* 6.0* 5.6* 5.6* 20.19

8.7* 8.7* 14.1* 14.1* 12.8* 12.8* 11.0* 11.0* 9.6* 9.6* 8.5* 8.5* 7.5* 7.5* 6.6* 6.6* 6.0* 6.0* 18.83

12.2* 12.2* 10.6* 10.6* 9.2* 9.2* 8.1* 8.1* 7.1* 7.1* 16.46

Industrial Stick 10.00 m (Variant 3B)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

The lift capacities are stated in metric tonnes (t) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities are valid for 750 mm track flat pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic check valves on the hoist cylinders, when they are used for lifting operations which require the use of lifting accessories.

carriage

m

11.3* 11.3* 10.2* 10.2* 8.32

11.2* 11.2* 9.7* 9.7* 8.3* 8.3* 11.41

10.0* 10.0* 9.1* 9.1* 7.6* 7.6* 7.4* 7.4* 13.63

9.6* 9.6* 8.8* 8.8* 8.1* 8.1* 7.5* 7.5* 6.8* 6.8* 15.38

9.4* 9.4* 8.6* 8.6* 8.0* 8.0* 7.4* 7.4* 7.0* 7.0* 6.4* 6.4* 16.82

9.3* 9.3* 8.5* 8.5* 7.9* 7.9* 7.3* 7.3* 6.9* 6.9* 6.1* 6.1* 6.1* 6.1* 18.00

9.4* 9.4* 8.5* 8.5* 7.9* 7.9* 7.3* 7.3* 6.8* 6.8* 6.5* 6.5* 5.9* 5.9* 19.00

9.5* 9.5* 8.6* 8.6* 7.9* 7.9* 7.3* 7.3* 6.8* 6.8* 6.4* 6.4* 6.1* 6.1* 5.8* 5.8* 19.83

9.7* 9.7* 8.8* 8.8* 8.0* 8.0* 7.4* 7.4* 6.9* 6.9* 6.4* 6.4* 6.1* 6.1* 5.7* 5.7* 20.51

11.3* 11.3* 10.0* 10.0* 9.0* 9.0* 8.2* 8.2* 7.5* 7.5* 7.0* 7.0* 6.5* 6.5* 6.1* 6.1* 5.7* 5.7* 5.7* 5.7* 21.06

13.2* 13.2* 11.8* 11.8* 10.4* 10.4* 9.3* 9.3* 8.4* 8.4* 7.7* 7.7* 7.1* 7.1* 6.5* 6.5* 6.1* 6.1* 5.7* 5.7* 5.5* 5.5* 21.49

13.4* 13.4* 14.8* 14.8* 12.5* 12.5* 10.9* 10.9* 9.6* 9.6* 8.6* 8.6* 7.8* 7.8* 7.2* 7.2* 6.6* 6.6* 6.1* 6.1* 5.7* 5.7* 5.4* 5.4* 21.81

27.4* 27.4* 20.1* 20.1* 16.0* 16.0* 13.3* 13.3* 11.4* 11.4* 10.0* 10.0* 8.9* 8.9* 8.0* 8.0* 7.3* 7.3* 6.7* 6.7* 6.2* 6.2* 5.7* 5.7* 5.3* 5.3* 22.01

3.4* 3.4* 22.0* 22.0* 17.1* 17.1* 14.0* 14.0* 11.9* 11.9* 10.3* 10.3* 9.1* 9.1* 8.2* 8.2* 7.4* 7.4* 6.8* 6.8* 6.2* 6.2* 5.7* 5.7* 5.3* 5.3* 22.12

0.9* 0.9* 6.6* 6.6* 18.0* 18.0* 14.6* 14.6* 12.3* 12.3* 10.6* 10.6* 9.3* 9.3* 8.3* 8.3* 7.5* 7.5* 6.8* 6.8* 6.2* 6.2* 5.6* 5.6* 5.2* 5.2* 22.12

1.1* 1.1* 4.4* 4.4* 11.7* 11.7* 15.1* 15.1* 12.6* 12.6* 10.9* 10.9* 9.5* 9.5* 8.4* 8.4* 7.6* 7.6* 6.8* 6.8* 6.2* 6.2* 5.6* 5.6* 5.1* 5.1* 22.01

1.8* 1.8* 4.3* 4.3* 9.0* 9.0* 15.3* 15.3* 12.8* 12.8* 11.0* 11.0* 9.6* 9.6* 8.5* 8.5* 7.6* 7.6* 6.8* 6.8* 6.1* 6.1* 5.4* 5.4* 5.0* 5.0* 21.80

2.7* 2.7* 4.8* 4.8* 8.5* 8.5* 15.3* 15.3* 12.8* 12.8* 11.0* 11.0* 9.6* 9.6* 8.5* 8.5* 7.5* 7.5* 6.7* 6.7* 6.0* 6.0* 5.2* 5.2* 4.9* 4.9* 21.39

5.6* 5.6* 8.7* 8.7* 14.5* 14.5* 12.6* 12.6* 10.9* 10.9* 9.5* 9.5* 8.3* 8.3* 7.4* 7.4* 6.5* 6.5* 5.7* 5.7* 5.3* 5.3* 20.26

9.3* 9.3* 14.3* 14.3* 12.2* 12.2* 10.5* 10.5* 9.2* 9.2* 8.1* 8.1* 7.1* 7.1* 6.2* 6.2* 5.9* 5.9* 18.53

10.0* 10.0* 8.7* 8.7* 7.6* 7.6* 7.5* 7.5* 15.07

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity

R 954 C Litronic High Rise 17

Industrial Attachment

with Industrial-Type Gooseneck Boom 12.50 m

m

-10

-20

-30

ft

80

24

22

70

20

60

18

16

50

14

40

12

10

30

8

20

6

4

10

2

0

-2

-4

-6

-8

-10

-12

1

2

3

4

1618202224

m024614 812 10

Attachment Envelope

Kinematic variants 3C/3D

1 with industrial stick 9.00 m (3D) 2 with industrial stick 9.00 m and grapple model 72 C (3D) 3 with industrial stick 9.00 m (3C) 4 with industrial stick 9.00 m and grapple model 72 C (3C)

Operating Weight and Ground Pressure

Operating weight includes basic machine with hydraulic cab elevation parallelogram + intermediate piece 0.5 m, counterweight 14.5 t, industrial-type gooseneck boom 12.50 m, industrial stick 9.00 m and grapple model 72 C with 5 semi-closed tines 1.20 m

Undercarriage HR

Pad width mm 750 Weight kg 97,700 Ground pressure kg/cm

3

.

2

1.02

80

70

60

50

40

30

20

10

-10

-20

-30

-40

5080

ft

m

26

24

22

20

18

16

14

12

10

8

6

4

2

0

-2

-4

-6

-8

-10

-12

1

3

2

4

1618202224

ft0102030406070

Attachment Envelope

Kinematic variants 3C/3D

1 with industrial stick 10.00 m (3D) 2 with industrial stick 10.00 m and grapple model 72 C (3D) 3 with industrial stick 10.00 m (3C) 4 with industrial stick 10.00 m and grapple model 72 C (3C)

Operating Weight and Ground Pressure

Operating weight includes basic machine with hydraulic cab elevation parallelogram + intermediate piece 0.5 m, counterweight 14.5 t, industrial-type gooseneck boom 12.50 m, industrial stick 10.00 m and grapple model 72 C with 5 semi-closed tines 1.20 m

Undercarriage HR

Pad width mm 750 Weight kg 98,100 Ground pressure kg/cm

m024614 810

m024614 812 10

3

.

2

1.02

18 R 954 C Litronic High Rise

5080

ft0102030406070

Lift Capacities

with Industrial-Type Gooseneck Boom 12.50 m

Industrial Stick 9.00 m (Variant 3C)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

carriage

m

6.4* 6.4* 6.3* 6.3* 14.52

6.0* 6.0* 6.0* 6.0* 15.88

6.0* 6.0* 5.8* 5.8* 5.8* 5.8* 17.00

6.0* 6.0* 5.8* 5.8* 5.6* 5.6* 17.92

6.4* 6.4* 6.1* 6.1* 5.8* 5.8* 5.6* 5.6* 5.6* 5.6* 18.68

6.6* 6.6* 6.2* 6.2* 5.9* 5.9* 5.7* 5.7* 5.5* 5.5* 19.28

7.5* 7.5* 6.9* 6.9* 6.4* 6.4* 6.1* 6.1* 5.8* 5.8* 5.5* 5.5* 5.5* 5.5* 19.75

8.9* 8.9* 8.0* 8.0* 7.2* 7.2* 6.7* 6.7* 6.2* 6.2* 5.9* 5.9* 5.6* 5.6* 5.5* 5.5* 20.10

17.5* 17.5* 17.1* 17.1* 13.4* 13.4* 11.1* 11.1* 9.6* 9.6* 8.4* 8.4* 7.6* 7.6* 7.0* 7.0* 6.4* 6.4* 6.0* 6.0* 5.7* 5.7* 5.6* 5.6* 20.32

3.1* 3.1* 13.5* 13.5* 14.9* 14.9* 12.1* 12.1* 10.3* 10.3* 8.9* 8.9* 8.0* 8.0* 7.2* 7.2* 6.7* 6.7* 6.2* 6.2* 5.8* 5.8* 5.6* 5.6* 20.43

1.9* 1.9* 7.0* 7.0* 16.3* 16.3* 13.0* 13.0* 10.9* 10.9* 9.4* 9.4* 8.4* 8.4* 7.5* 7.5* 6.9* 6.9* 6.4* 6.4* 5.9* 5.9* 5.7* 5.7* 20.43

2.5* 2.5* 5.8* 5.8* 11.9* 11.9* 13.9* 13.9* 11.5* 11.5* 9.9* 9.9* 8.7* 8.7* 7.8* 7.8* 7.1* 7.1* 6.5* 6.5* 6.1* 6.1* 5.8* 5.8* 20.32

3.4* 3.4* 5.9* 5.9* 10.2* 10.2* 14.5* 14.5* 12.0* 12.0* 10.3* 10.3* 9.0* 9.0* 8.0* 8.0* 7.3* 7.3* 6.7* 6.7* 6.1* 6.1* 5.9* 5.9* 20.09

4.4* 4.4* 6.4* 6.4* 9.8* 9.8* 14.9* 14.9* 12.4* 12.4* 10.6* 10.6* 9.3* 9.3* 8.2* 8.2* 7.4* 7.4* 6.7* 6.7* 6.2* 6.2* 6.1* 6.1* 19.75

5.4* 5.4* 7.1* 7.1* 10.0* 10.0* 15.1* 15.1* 12.6* 12.6* 10.8* 10.8* 9.4* 9.4* 8.4* 8.4* 7.5* 7.5* 6.8* 6.8* 6.2* 6.2* 19.27

6.3* 6.3* 7.9* 7.9* 10.5* 10.5* 15.0* 15.0* 12.7* 12.7* 10.9* 10.9* 9.5* 9.5* 8.4* 8.4* 7.5* 7.5* 6.7* 6.7* 6.4* 6.4* 18.67

8.6* 8.6* 11.2* 11.2* 14.7* 14.7* 12.5* 12.5* 10.8* 10.8* 9.4* 9.4* 8.3* 8.3* 7.3* 7.3* 6.5* 6.5* 17.91

12.0* 12.0* 14.2* 14.2* 12.1* 12.1* 10.4* 10.4* 9.1* 9.1* 8.0* 8.0* 7.0* 7.0* 6.6* 6.6* 16.99

9.8* 9.8* 8.7* 8.7* 13.30

Industrial Stick 10.00 m (Variant 3C)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

The lift capacities are stated in metric tonnes (t) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities are valid for 750 mm track flat pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic check valves on the hoist cylinders, when they are used for lifting operations which require the use of lifting accessories.

carriage

m

5.9* 5.9* 14.27

5.6* 5.6* 5.5* 5.5* 15.80

5.5* 5.5* 5.3* 5.3* 5.3* 5.3* 17.07

5.4* 5.4* 5.3* 5.3* 5.1* 5.1* 5.1* 5.1* 18.11

5.5* 5.5* 5.3* 5.3* 5.1* 5.1* 5.0* 5.0* 18.98

5.6* 5.6* 5.3* 5.3* 5.1* 5.1* 5.0* 5.0* 5.0* 5.0* 19.69

5.7* 5.7* 5.4* 5.4* 5.2* 5.2* 5.0* 5.0* 4.9* 4.9* 20.26

6.4* 6.4* 5.9* 5.9* 5.6* 5.6* 5.3* 5.3* 5.1* 5.1* 4.9* 4.9* 20.71

7.3* 7.3* 6.7* 6.7* 6.2* 6.2* 5.8* 5.8* 5.4* 5.4* 5.2* 5.2* 5.0* 5.0* 5.0* 5.0* 21.04

10.1* 10.1* 8.8* 8.8* 7.8* 7.8* 7.0* 7.0* 6.4* 6.4* 6.0* 6.0* 5.6* 5.6* 5.3* 5.3* 5.0* 5.0* 5.0* 5.0* 21.26

9.2* 9.2* 17.5* 17.5* 13.5* 13.5* 11.1* 11.1* 9.5* 9.5* 8.3* 8.3* 7.4* 7.4* 6.7* 6.7* 6.2* 6.2* 5.8* 5.8* 5.4* 5.4* 5.1* 5.1* 5.1* 5.1* 21.36

3.8* 3.8* 11.0* 11.0* 15.0* 15.0* 12.1* 12.1* 10.1* 10.1* 8.8* 8.8* 7.8* 7.8* 7.0* 7.0* 6.4* 6.4* 5.9* 5.9* 5.5* 5.5* 5.2* 5.2* 5.1* 5.1* 21.36

3.3* 3.3* 7.2* 7.2* 15.6* 15.6* 12.9* 12.9* 10.8* 10.8* 9.3* 9.3* 8.2* 8.2* 7.3* 7.3* 6.6* 6.6* 6.1* 6.1* 5.7* 5.7* 5.3* 5.3* 5.2* 5.2* 21.25

3.7* 3.7* 6.5* 6.5* 11.6* 11.6* 13.6* 13.6* 11.3* 11.3* 9.7* 9.7* 8.5* 8.5* 7.6* 7.6* 6.8* 6.8* 6.3* 6.3* 5.8* 5.8* 5.4* 5.4* 5.3* 5.3* 21.04

4.3* 4.3* 6.5* 6.5* 10.4* 10.4* 14.2* 14.2* 11.8* 11.8* 10.1* 10.1* 8.8* 8.8* 7.8* 7.8* 7.0* 7.0* 6.4* 6.4* 5.9* 5.9* 5.5* 5.5* 20.71

5.1* 5.1* 6.9* 6.9* 10.1* 10.1* 14.5* 14.5* 12.1* 12.1* 10.3* 10.3* 9.0* 9.0* 8.0* 8.0* 7.1* 7.1* 6.5* 6.5* 5.9* 5.9* 5.6* 5.6* 20.26

5.8* 5.8* 7.5* 7.5* 10.3* 10.3* 14.6* 14.6* 12.2* 12.2* 10.5* 10.5* 9.1* 9.1* 8.1* 8.1* 7.2* 7.2* 6.5* 6.5* 5.8* 5.8* 5.7* 5.7* 19.68

6.5* 6.5* 8.1* 8.1* 10.7* 10.7* 14.5* 14.5* 12.2* 12.2* 10.5* 10.5* 9.1* 9.1* 8.0* 8.0* 7.2* 7.2* 6.4* 6.4* 5.9* 5.9* 18.97

8.7* 8.7* 11.3* 11.3* 14.2* 14.2* 12.0* 12.0* 10.3* 10.3* 9.0* 9.0* 7.9* 7.9* 7.0* 7.0* 6.1* 6.1* 6.0* 6.0* 18.10

13.5* 13.5* 11.5* 11.5* 9.9* 9.9* 8.6* 8.6* 7.5* 7.5* 6.5* 6.5* 6.3* 6.3* 16.77

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity

R 954 C Litronic High Rise 19

Lift Capacities

with Industrial-Type Gooseneck Boom 12.50 m

Industrial Stick 9.00 m (Variant 3D)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

carriage

m

8.5* 8.5* 8.3* 8.3* 10.64

8.9* 8.9* 8.2* 8.2* 7.6* 7.6* 12.82

8.0* 8.0* 7.5* 7.5* 7.1* 7.1* 14.52

7.9* 7.9* 7.4* 7.4* 7.0* 7.0* 6.8* 6.8* 15.88

7.9* 7.9* 7.3* 7.3* 6.9* 6.9* 6.6* 6.6* 6.5* 6.5* 17.00

8.0* 8.0* 7.4* 7.4* 6.9* 6.9* 6.5* 6.5* 6.3* 6.3* 17.92

8.9* 8.9* 8.1* 8.1* 7.5* 7.5* 7.0* 7.0* 6.6* 6.6* 6.2* 6.2* 6.1* 6.1* 18.68

9.3* 9.3* 8.4* 8.4* 7.7* 7.7* 7.1* 7.1* 6.7* 6.7* 6.3* 6.3* 6.0* 6.0* 19.28

11.0* 11.0* 9.7* 9.7* 8.7* 8.7* 7.9* 7.9* 7.3* 7.3* 6.8* 6.8* 6.3* 6.3* 6.0* 6.0* 5.9* 5.9* 19.75

17.3* 17.3* 14.0* 14.0* 11.8* 11.8* 10.2* 10.2* 9.1* 9.1* 8.2* 8.2* 7.5* 7.5* 6.9* 6.9* 6.4* 6.4* 6.0* 6.0* 5.9* 5.9* 20.10

17.5* 17.5* 19.5* 19.5* 15.3* 15.3* 12.6* 12.6* 10.8* 10.8* 9.5* 9.5* 8.5* 8.5* 7.7* 7.7* 7.1* 7.1* 6.5* 6.5* 6.1* 6.1* 5.9* 5.9* 20.32

3.1* 3.1* 13.5* 13.5* 16.6* 16.6* 13.5* 13.5* 11.4* 11.4* 9.9* 9.9* 8.8* 8.8* 7.9* 7.9* 7.2* 7.2* 6.7* 6.7* 6.2* 6.2* 5.9* 5.9* 20.43

1.9* 1.9* 7.0* 7.0* 17.6* 17.6* 14.2* 14.2* 11.9* 11.9* 10.3* 10.3* 9.1* 9.1* 8.1* 8.1* 7.4* 7.4* 6.8* 6.8* 6.2* 6.2* 5.9* 5.9* 20.43

2.5* 2.5* 5.8* 5.8* 11.9* 11.9* 14.8* 14.8* 12.4* 12.4* 10.6* 10.6* 9.3* 9.3* 8.3* 8.3* 7.5* 7.5* 6.8* 6.8* 6.3* 6.3* 6.0* 6.0* 20.32

3.4* 3.4* 5.9* 5.9* 10.2* 10.2* 15.2* 15.2* 12.7* 12.7* 10.9* 10.9* 9.5* 9.5* 8.5* 8.5* 7.6* 7.6* 6.9* 6.9* 6.2* 6.2* 6.0* 6.0* 20.09

4.4* 4.4* 6.4* 6.4* 9.8* 9.8* 15.3* 15.3* 12.8* 12.8* 11.0* 11.0* 9.6* 9.6* 8.5* 8.5* 7.6* 7.6* 6.9* 6.9* 6.2* 6.2* 6.0* 6.0* 19.75

7.1* 7.1* 10.0* 10.0* 15.2* 15.2* 12.8* 12.8* 11.0* 11.0* 9.6* 9.6* 8.5* 8.5* 7.6* 7.6* 6.7* 6.7* 6.1* 6.1* 19.27

10.5* 10.5* 14.8* 14.8* 12.6* 12.6* 10.8* 10.8* 9.5* 9.5* 8.3* 8.3* 7.4* 7.4* 6.5* 6.5* 6.1* 6.1* 18.67

14.1* 14.1* 12.1* 12.1* 10.5* 10.5* 9.1* 9.1* 8.0* 8.0* 7.0* 7.0* 6.8* 6.8* 16.85

Industrial Stick 10.00 m (Variant 3D)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

The lift capacities are stated in metric tonnes (t) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities are valid for 750 mm track flat pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic check valves on the hoist cylinders, when they are used for lifting operations which require the use of lifting accessories.

carriage

m

7.4* 7.4* 7.0* 7.0* 12.35

7.6* 7.6* 7.1* 7.1* 6.4* 6.4* 14.27

7.4* 7.4* 6.9* 6.9* 6.6* 6.6* 6.1* 6.1* 15.80

6.8* 6.8* 6.4* 6.4* 6.1* 6.1* 5.9* 5.9* 17.07

6.8* 6.8* 6.4* 6.4* 6.1* 6.1* 5.8* 5.8* 5.8* 5.8* 18.11

7.4* 7.4* 6.9* 6.9* 6.4* 6.4* 6.1* 6.1* 5.8* 5.8* 5.6* 5.6* 18.98

7.6* 7.6* 7.0* 7.0* 6.5* 6.5* 6.1* 6.1* 5.8* 5.8* 5.5* 5.5* 5.5* 5.5* 19.69

8.6* 8.6* 7.8* 7.8* 7.2* 7.2* 6.7* 6.7* 6.2* 6.2* 5.8* 5.8* 5.5* 5.5* 5.4* 5.4* 20.26

9.0* 9.0* 8.1* 8.1* 7.4* 7.4* 6.8* 6.8* 6.3* 6.3* 5.9* 5.9* 5.6* 5.6* 5.4* 5.4* 20.71

12.8* 12.8* 10.9* 10.9* 9.5* 9.5* 8.5* 8.5* 7.7* 7.7* 7.0* 7.0* 6.5* 6.5* 6.0* 6.0* 5.7* 5.7* 5.3* 5.3* 5.3* 5.3* 21.04

24.0* 24.0* 17.7* 17.7* 14.1* 14.1* 11.8* 11.8* 10.1* 10.1* 8.9* 8.9* 8.0* 8.0* 7.2* 7.2* 6.6* 6.6* 6.1* 6.1* 5.7* 5.7* 5.4* 5.4* 5.3* 5.3* 21.26

9.2* 9.2* 19.9* 19.9* 15.4* 15.4* 12.6* 12.6* 10.7* 10.7* 9.3* 9.3* 8.3* 8.3* 7.5* 7.5* 6.8* 6.8* 6.3* 6.3* 5.8* 5.8* 5.4* 5.4* 5.3* 5.3* 21.36

3.8* 3.8* 11.0* 11.0* 16.5* 16.5* 13.4* 13.4* 11.2* 11.2* 9.7* 9.7* 8.6* 8.6* 7.7* 7.7* 7.0* 7.0* 6.4* 6.4* 5.9* 5.9* 5.5* 5.5* 5.4* 5.4* 21.36

3.3* 3.3* 7.2* 7.2* 15.6* 15.6* 14.0* 14.0* 11.7* 11.7* 10.1* 10.1* 8.8* 8.8* 7.9* 7.9* 7.1* 7.1* 6.5* 6.5* 6.0* 6.0* 5.5* 5.5* 5.4* 5.4* 21.25

3.7* 3.7* 6.5* 6.5* 11.6* 11.6* 14.5* 14.5* 12.1* 12.1* 10.4* 10.4* 9.1* 9.1* 8.1* 8.1* 7.2* 7.2* 6.6* 6.6* 6.0* 6.0* 5.4* 5.4* 5.4* 5.4* 21.04

4.3* 4.3* 6.5* 6.5* 10.4* 10.4* 14.8* 14.8* 12.3* 12.3* 10.6* 10.6* 9.2* 9.2* 8.2* 8.2* 7.3* 7.3* 6.6* 6.6* 6.0* 6.0* 5.5* 5.5* 20.71

5.1* 5.1* 6.9* 6.9* 10.1* 10.1* 14.8* 14.8* 12.4* 12.4* 10.7* 10.7* 9.3* 9.3* 8.2* 8.2* 7.3* 7.3* 6.6* 6.6* 5.9* 5.9* 5.5* 5.5* 20.26

7.5* 7.5* 10.3* 10.3* 14.6* 14.6* 12.3* 12.3* 10.6* 10.6* 9.2* 9.2* 8.1* 8.1* 7.2* 7.2* 6.4* 6.4* 5.6* 5.6* 5.5* 5.5* 19.68

10.7* 10.7* 14.2* 14.2* 12.0* 12.0* 10.4* 10.4* 9.0* 9.0* 7.9* 7.9* 7.0* 7.0* 6.1* 6.1* 5.7* 5.7* 18.74

11.5* 11.5* 9.9* 9.9* 8.6* 8.6* 7.5* 7.5* 7.0* 7.0* 15.82

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity

20 R 954 C Litronic High Rise

Industrial Attachment

with Industrial-Type Gooseneck Boom 11.50 m with Tower Elevation 1.20 m

m

80

70

60

50

40

30

20

10

-10

-20

-30

ft

24

22

20

18

16

14

12

10

8

6

4

2

0

-2

-4

-6

-8

-10

-12

1

3

2

4

m024614 812 10

1618202224

m024614 810

Attachment Envelope

Kinematic variants 3C/3D

1 with industrial stick 9.00 m (3D) 2 with industrial stick 9.00 m and grapple model 72 C (3D) 3 with industrial stick 9.00 m (3C) 4 with industrial stick 9.00 m and grapple model 72 C (3C)

Operating Weight and Ground Pressure

Operating weight includes basic machine with tower elevation 1.20 m, hydraulic cab elevation parallelogram + intermediate piece 0.5 m, counterweight 14.5 t, industrial-type gooseneck boom 11.50 m, industrial stick 9.00 m and grapple model 72 C with 5 semi-closed tines

3

1.20 m

.

Undercarriage HR

Pad width mm 750 Weight kg 99,700 Ground pressure kg/cm

2

1.04

80

70

60

50

40

30

20

10

-10

-20

-30

ft0102030406070

5080

m

ft

24

22

20

18

16

14

12

10

8

6

4

2

0

-2

-4

-6

-8

-10

-12

1

3

2

4

1618202224

ft0102030406070

Attachment Envelope

Kinematic variants 3C/3D

1 with industrial stick 10.00 m (3D) 2 with industrial stick 10.00 m and grapple model 72 C (3D) 3 with industrial stick 10.00 m (3C) 4 with industrial stick 10.00 m and grapple model 72 C (3C)

Operating Weight and Ground Pressure

Operating weight includes basic machine with tower elevation 1.20 m, hydraulic cab elevation parallelogram + intermediate piece 0.5 m, counterweight 14.5 t, industrial-type gooseneck boom 11.50 m, industrial stick 10.00 m and grapple model 72 C with 5 semi-closed tines

3

1.20 m

.

Undercarriage HR

Pad width mm 750 Weight kg 100,100 Ground pressure kg/cm

m024614 812 10

2

1.04

5080

ft0102030406070

R 954 C Litronic High Rise 21

Lift Capacities

with Industrial-Type Gooseneck Boom 11.50 m with Tower Elevation 1.20 m

Industrial Stick 9.00 m (Variant 3C)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

carriage

m

7.2* 7.2* 12.79

6.8* 6.8* 6.7* 6.7* 14.36

6.6* 6.6* 6.5* 6.5* 6.5* 6.5* 15.62

6.6* 6.6* 6.4* 6.4* 6.3* 6.3* 6.3* 6.3* 16.65

6.7* 6.7* 6.5* 6.5* 6.3* 6.3* 6.3* 6.3* 17.48

6.9* 6.9* 6.6* 6.6* 6.4* 6.4* 6.2* 6.2* 6.2* 6.2* 18.15

7.6* 7.6* 7.1* 7.1* 6.8* 6.8* 6.5* 6.5* 6.3* 6.3* 6.2* 6.2* 18.68

8.1* 8.1* 7.5* 7.5* 7.0* 7.0* 6.7* 6.7* 6.4* 6.4* 6.3* 6.3* 19.07

10.8* 10.8* 9.5* 9.5* 8.6* 8.6* 7.9* 7.9* 7.3* 7.3* 6.9* 6.9* 6.5* 6.5* 6.3* 6.3* 19.33

17.8* 17.8* 18.4* 18.4* 14.4* 14.4* 12.0* 12.0* 10.4* 10.4* 9.2* 9.2* 8.3* 8.3* 7.6* 7.6* 7.1* 7.1* 6.7* 6.7* 6.4* 6.4* 19.47

5.5* 5.5* 17.1* 17.1* 16.1* 16.1* 13.1* 13.1* 11.2* 11.2* 9.8* 9.8* 8.8* 8.8* 8.0* 8.0* 7.4* 7.4* 6.9* 6.9* 6.5* 6.5* 19.49

4.4* 4.4* 9.9* 9.9* 17.6* 17.6* 14.2* 14.2* 11.9* 11.9* 10.3* 10.3* 9.2* 9.2* 8.3* 8.3* 7.6* 7.6* 7.1* 7.1* 6.6* 6.6* 19.40

4.7* 4.7* 8.5* 8.5* 16.0* 16.0* 15.0* 15.0* 12.6* 12.6* 10.9* 10.9* 9.6* 9.6* 8.6* 8.6* 7.8* 7.8* 7.2* 7.2* 6.8* 6.8* 19.18

5.5* 5.5* 8.4* 8.4* 13.8* 13.8* 15.7* 15.7* 13.1* 13.1* 11.3* 11.3* 9.9* 9.9* 8.8* 8.8* 8.0* 8.0* 7.3* 7.3* 6.9* 6.9* 18.84

6.3* 6.3* 8.8* 8.8* 13.1* 13.1* 16.1* 16.1* 13.4* 13.4* 11.5* 11.5* 10.1* 10.1* 9.0* 9.0* 8.1* 8.1* 7.3* 7.3* 7.1* 7.1* 18.37

7.2* 7.2* 9.4* 9.4* 13.3* 13.3* 16.2* 16.2* 13.6* 13.6* 11.7* 11.7* 10.2* 10.2* 9.0* 9.0* 8.1* 8.1* 7.3* 7.3* 17.76

10.1* 10.1* 13.8* 13.8* 16.0* 16.0* 13.5* 13.5* 11.6* 11.6* 10.1* 10.1* 8.9* 8.9* 7.9* 7.9* 7.5* 7.5* 16.99

14.6* 14.6* 15.5* 15.5* 13.1* 13.1* 11.3* 11.3* 9.8* 9.8* 8.5* 8.5* 7.7* 7.7* 16.04

12.4* 12.4* 10.6* 10.6* 10.3* 10.3* 12.30

Industrial Stick 10.00 m (Variant 3C)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

The lift capacities are stated in metric tonnes (t) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities are valid for 750 mm track flat pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic check valves on the hoist cylinders, when they are used for lifting operations which require the use of lifting accessories.

carriage

m

6.3* 6.3* 14.18

6.0* 6.0* 6.0* 6.0* 15.61

5.8* 5.8* 5.8* 5.8* 5.8* 5.8* 16.78

5.8* 5.8* 5.7* 5.7* 5.7* 5.7* 17.73

5.9* 5.9* 5.7* 5.7* 5.6* 5.6* 5.6* 5.6* 18.52

6.0* 6.0* 5.8* 5.8* 5.7* 5.7* 5.6* 5.6* 19.15

6.5* 6.5* 6.2* 6.2* 5.9* 5.9* 5.7* 5.7* 5.6* 5.6* 5.6* 5.6* 19.65

7.3* 7.3* 6.8* 6.8* 6.4* 6.4* 6.1* 6.1* 5.9* 5.9* 5.7* 5.7* 5.6* 5.6* 20.02

8.7* 8.7* 7.9* 7.9* 7.2* 7.2* 6.7* 6.7* 6.3* 6.3* 6.0* 6.0* 5.8* 5.8* 5.7* 5.7* 20.27

12.9* 12.9* 10.9* 10.9* 9.5* 9.5* 8.5* 8.5* 7.7* 7.7* 7.1* 7.1* 6.6* 6.6* 6.2* 6.2* 5.9* 5.9* 5.8* 5.8* 20.40

11.0* 11.0* 19.0* 19.0* 14.7* 14.7* 12.0* 12.0* 10.3* 10.3* 9.1* 9.1* 8.1* 8.1* 7.4* 7.4* 6.9* 6.9* 6.4* 6.4* 6.1* 6.1* 5.9* 5.9* 20.43

5.8* 5.8* 14.1* 14.1* 16.3* 16.3* 13.2* 13.2* 11.1* 11.1* 9.6* 9.6* 8.6* 8.6* 7.8* 7.8* 7.1* 7.1* 6.6* 6.6* 6.2* 6.2* 6.0* 6.0* 20.33

5.2* 5.2* 9.9* 9.9* 17.6* 17.6* 14.1* 14.1* 11.8* 11.8* 10.2* 10.2* 9.0* 9.0* 8.1* 8.1* 7.4* 7.4* 6.8* 6.8* 6.3* 6.3* 6.1* 6.1* 20.13

5.5* 5.5* 8.8* 8.8* 15.4* 15.4* 14.9* 14.9* 12.4* 12.4* 10.7* 10.7* 9.4* 9.4* 8.4* 8.4* 7.6* 7.6* 6.9* 6.9* 6.4* 6.4* 6.3* 6.3* 19.81

6.1* 6.1* 8.8* 8.8* 13.7* 13.7* 15.4* 15.4* 12.9* 12.9* 11.0* 11.0* 9.6* 9.6* 8.6* 8.6* 7.7* 7.7* 7.0* 7.0* 6.4* 6.4* 19.36

6.7* 6.7* 9.1* 9.1* 13.2* 13.2* 15.7* 15.7* 13.1* 13.1* 11.3* 11.3* 9.8* 9.8* 8.7* 8.7* 7.8* 7.8* 7.0* 7.0* 6.6* 6.6* 18.78

7.4* 7.4* 9.6* 9.6* 13.3* 13.3* 15.7* 15.7* 13.2* 13.2* 11.3* 11.3* 9.9* 9.9* 8.7* 8.7* 7.7* 7.7* 6.9* 6.9* 6.8* 6.8* 18.06

10.2* 10.2* 13.8* 13.8* 15.4* 15.4* 13.0* 13.0* 11.2* 11.2* 9.7* 9.7* 8.5* 8.5* 7.5* 7.5* 7.0* 7.0* 17.17

14.7* 14.7* 14.8* 14.8* 12.5* 12.5* 10.8* 10.8* 9.3* 9.3* 8.1* 8.1* 7.4* 7.4* 15.80

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity

22 R 954 C Litronic High Rise

Lift Capacities

with Industrial-Type Gooseneck Boom 11.50 m with Tower Elevation 1.20 m

Industrial Stick 9.00 m (Variant 3D)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

carriage

m

8.6* 8.6* 8.2* 8.2* 10.77

9.0* 9.0* 8.5* 8.5* 7.5* 7.5* 12.79

8.2* 8.2* 7.9* 7.9* 7.1* 7.1* 14.36

8.1* 8.1* 7.7* 7.7* 7.4* 7.4* 6.8* 6.8* 15.62

8.1* 8.1* 7.7* 7.7* 7.3* 7.3* 7.0* 7.0* 6.7* 6.7* 16.65

8.3* 8.3* 7.8* 7.8* 7.4* 7.4* 7.0* 7.0* 6.6* 6.6* 17.48

9.2* 9.2* 8.5* 8.5* 7.9* 7.9* 7.5* 7.5* 7.1* 7.1* 6.8* 6.8* 6.6* 6.6* 18.15

10.6* 10.6* 9.6* 9.6* 8.8* 8.8* 8.2* 8.2* 7.6* 7.6* 7.2* 7.2* 6.8* 6.8* 6.6* 6.6* 18.68

13.2* 13.2* 11.5* 11.5* 10.2* 10.2* 9.2* 9.2* 8.5* 8.5* 7.8* 7.8* 7.3* 7.3* 6.9* 6.9* 6.7* 6.7* 19.07

24.0* 24.0* 18.1* 18.1* 14.7* 14.7* 12.5* 12.5* 10.9* 10.9* 9.7* 9.7* 8.8* 8.8* 8.1* 8.1* 7.5* 7.5* 7.0* 7.0* 6.7* 6.7* 19.33

17.8* 17.8* 20.8* 20.8* 16.3* 16.3* 13.5* 13.5* 11.6* 11.6* 10.2* 10.2* 9.2* 9.2* 8.3* 8.3* 7.7* 7.7* 7.2* 7.2* 6.7* 6.7* 19.47

5.5* 5.5* 17.1* 17.1* 17.7* 17.7* 14.4* 14.4* 12.3* 12.3* 10.7* 10.7* 9.5* 9.5* 8.6* 8.6* 7.9* 7.9* 7.3* 7.3* 6.7* 6.7* 19.49

4.4* 4.4* 9.9* 9.9* 18.9* 18.9* 15.3* 15.3* 12.9* 12.9* 11.1* 11.1* 9.8* 9.8* 8.8* 8.8* 8.0* 8.0* 7.4* 7.4* 6.8* 6.8* 19.40

4.7* 4.7* 8.5* 8.5* 16.0* 16.0* 15.9* 15.9* 13.3* 13.3* 11.5* 11.5* 10.1* 10.1* 9.0* 9.0* 8.1* 8.1* 7.4* 7.4* 6.9* 6.9* 19.18

5.5* 5.5* 8.4* 8.4* 13.8* 13.8* 16.3* 16.3* 13.6* 13.6* 11.7* 11.7* 10.3* 10.3* 9.1* 9.1* 8.2* 8.2* 7.4* 7.4* 6.9* 6.9* 18.84

6.3* 6.3* 8.8* 8.8* 13.1* 13.1* 16.3* 16.3* 13.7* 13.7* 11.8* 11.8* 10.3* 10.3* 9.1* 9.1* 8.1* 8.1* 7.2* 7.2* 7.0* 7.0* 18.37

9.4* 9.4* 13.3* 13.3* 16.1* 16.1* 13.6* 13.6* 11.7* 11.7* 10.2* 10.2* 9.0* 9.0* 7.9* 7.9* 7.1* 7.1* 17.76

13.8* 13.8* 15.5* 15.5* 13.2* 13.2* 11.4* 11.4* 9.9* 9.9* 8.6* 8.6* 7.7* 7.7* 16.16

Industrial Stick 10.00 m (Variant 3D)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

The lift capacities are stated in metric tonnes (t) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities are valid for 750 mm track flat pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic check valves on the hoist cylinders, when they are used for lifting operations which require the use of lifting accessories.

carriage

m

7.7* 7.7* 10.08

7.4* 7.4* 6.9* 6.9* 12.41

7.8* 7.8* 7.4* 7.4* 6.4* 6.4* 14.18

7.5* 7.5* 7.2* 7.2* 6.9* 6.9* 6.1* 6.1* 15.61

7.4* 7.4* 7.1* 7.1* 6.8* 6.8* 6.4* 6.4* 5.9* 5.9* 16.78

7.5* 7.5* 7.1* 7.1* 6.8* 6.8* 6.5* 6.5* 5.7* 5.7* 17.73

7.6* 7.6* 7.2* 7.2* 6.8* 6.8* 6.5* 6.5* 6.3* 6.3* 5.7* 5.7* 18.52

7.8* 7.8* 7.3* 7.3* 6.9* 6.9* 6.6* 6.6* 6.3* 6.3* 5.7* 5.7* 19.15

8.8* 8.8* 8.2* 8.2* 7.6* 7.6* 7.1* 7.1* 6.7* 6.7* 6.4* 6.4* 6.0* 6.0* 5.7* 5.7* 19.65

10.5* 10.5* 9.4* 9.4* 8.6* 8.6* 7.9* 7.9* 7.3* 7.3* 6.9* 6.9* 6.5* 6.5* 6.1* 6.1* 5.8* 5.8* 20.02

13.3* 13.3* 11.4* 11.4* 10.1* 10.1* 9.0* 9.0* 8.2* 8.2* 7.6* 7.6* 7.0* 7.0* 6.6* 6.6* 6.2* 6.2* 5.9* 5.9* 20.27

25.4* 25.4* 18.6* 18.6* 14.9* 14.9* 12.5* 12.5* 10.8* 10.8* 9.5* 9.5* 8.6* 8.6* 7.8* 7.8* 7.2* 7.2* 6.7* 6.7* 6.3* 6.3* 6.0* 6.0* 20.40

11.0* 11.0* 21.2* 21.2* 16.4* 16.4* 13.5* 13.5* 11.5* 11.5* 10.0* 10.0* 9.0* 9.0* 8.1* 8.1* 7.4* 7.4* 6.9* 6.9* 6.4* 6.4* 6.1* 6.1* 20.43

5.8* 5.8* 14.1* 14.1* 17.7* 17.7* 14.4* 14.4* 12.1* 12.1* 10.5* 10.5* 9.3* 9.3* 8.4* 8.4* 7.6* 7.6* 7.0* 7.0* 6.5* 6.5* 6.2* 6.2* 20.33

5.2* 5.2* 9.9* 9.9* 18.7* 18.7* 15.1* 15.1* 12.7* 12.7* 10.9* 10.9* 9.6* 9.6* 8.6* 8.6* 7.8* 7.8* 7.1* 7.1* 6.5* 6.5* 6.2* 6.2* 20.13

5.5* 5.5* 8.8* 8.8* 15.4* 15.4* 15.6* 15.6* 13.1* 13.1* 11.2* 11.2* 9.8* 9.8* 8.8* 8.8* 7.9* 7.9* 7.1* 7.1* 6.4* 6.4* 6.3* 6.3* 19.81

6.1* 6.1* 8.8* 8.8* 13.7* 13.7* 15.9* 15.9* 13.3* 13.3* 11.4* 11.4* 10.0* 10.0* 8.8* 8.8* 7.9* 7.9* 7.1* 7.1* 6.4* 6.4* 19.36

6.7* 6.7* 9.1* 9.1* 13.2* 13.2* 15.9* 15.9* 13.3* 13.3* 11.4* 11.4* 10.0* 10.0* 8.8* 8.8* 7.8* 7.8* 6.9* 6.9* 6.4* 6.4* 18.78

9.6* 9.6* 13.3* 13.3* 15.5* 15.5* 13.1* 13.1* 11.3* 11.3* 9.8* 9.8* 8.6* 8.6* 7.6* 7.6* 6.6* 6.6* 17.96

14.9* 14.9* 12.6* 12.6* 10.8* 10.8* 9.4* 9.4* 8.2* 8.2* 7.9* 7.9* 15.29

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity

R 954 C Litronic High Rise 23

Industrial Attachment

with Industrial-Type Gooseneck Boom 12.50 m with Tower Elevation 1.20 m

m

-10

-20

-30

ft

26

80

24

22

70

20

60

18

16

50

14

40

12

10

30

8

20

6

4

10

2

0

-2

-4

-6

-8

-10

-12

1

3

2

4

m024614 812 10

161820

1618202224

m024614 812 10

Attachment Envelope

Kinematic variants 3C/3D

1 with industrial stick 9.00 m (3D) 2 with industrial stick 9.00 m and grapple model 72 C (3D) 3 with industrial stick 9.00 m (3C) 4 with industrial stick 9.00 m and grapple model 72 C (3C)

Operating Weight and Ground Pressure

Operating weight includes basic machine with tower elevation 1.20 m, hydraulic cab elevation parallelogram + intermediate piece 0.5 m, counterweight 14.5 t, industrial-type gooseneck boom 12.50 m, industrial stick 9.00 m and grapple model 72 C with 5 semi-closed tines

3

1.20 m

.

Undercarriage HR

Pad width mm 750 Weight kg 100,200 Ground pressure kg/cm

2

1.04

-10

-20

-30

ft0102030406070

5080

m

ft

26

80

24

22

70

20

60

18

16

50

14

40

12

10

30

8

20

6

4

10

2

0

-2

-4

-6

-8

-10

-12

1

3

2

4

1618202224

ft0102030406070

Attachment Envelope

Kinematic variants 3C/3D

1 with industrial stick 10.00 m (3D) 2 with industrial stick 10.00 m and grapple model 72 C (3D) 3 with industrial stick 10.00 m (3C) 4 with industrial stick 10.00 m and grapple model 72 C (3C)

Operating Weight and Ground Pressure

Operating weight includes basic machine with tower elevation 1.20 m, hydraulic cab elevation parallelogram + intermediate piece 0.5 m, counterweight 14.5 t, industrial-type gooseneck boom 12.50 m, industrial stick 10.00 m and grapple model 72 C with 5 semi-closed tines

3

1.20 m

.

Undercarriage HR

Pad width mm 750 Weight kg 100,600 Ground pressure kg/cm

m024614 812 10

m024614 810

2

1.05

24 R 954 C Litronic High Rise

ft0102030406070

5080

ft0102030406070

Lift Capacities

with Industrial-Type Gooseneck Boom 12.50 m with Tower Elevation 1.20 m

Industrial Stick 9.00 m (Variant 3C)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

carriage

m

6.4* 6.4* 6.4* 6.4* 14.21

6.1* 6.1* 6.0* 6.0* 15.63

6.0* 6.0* 5.8* 5.8* 5.8* 5.8* 16.80

6.0* 6.0* 5.8* 5.8* 5.6* 5.6* 17.75

6.4* 6.4* 6.1* 6.1* 5.8* 5.8* 5.6* 5.6* 5.6* 5.6* 18.54

6.6* 6.6* 6.2* 6.2* 5.9* 5.9* 5.6* 5.6* 5.5* 5.5* 19.17

7.4* 7.4* 6.9* 6.9* 6.4* 6.4* 6.0* 6.0* 5.7* 5.7* 5.5* 5.5* 5.5* 5.5* 19.67

8.8* 8.8* 7.9* 7.9* 7.2* 7.2* 6.6* 6.6* 6.2* 6.2* 5.9* 5.9* 5.6* 5.6* 5.5* 5.5* 20.04

23.0* 23.0* 16.6* 16.6* 13.1* 13.1* 10.9* 10.9* 9.4* 9.4* 8.3* 8.3* 7.5* 7.5* 6.9* 6.9* 6.4* 6.4* 6.0* 6.0* 5.7* 5.7* 5.6* 5.6* 20.29

3.9* 3.9* 17.3* 17.3* 14.6* 14.6* 11.9* 11.9* 10.1* 10.1* 8.8* 8.8* 7.9* 7.9* 7.2* 7.2* 6.6* 6.6* 6.2* 6.2* 5.8* 5.8* 5.6* 5.6* 20.42

2.0* 2.0* 7.6* 7.6* 16.0* 16.0* 12.9* 12.9* 10.8* 10.8* 9.4* 9.4* 8.3* 8.3* 7.5* 7.5* 6.8* 6.8* 6.3* 6.3* 5.9* 5.9* 5.7* 5.7* 20.44

2.3* 2.3* 5.9* 5.9* 12.5* 12.5* 13.7* 13.7* 11.4* 11.4* 9.8* 9.8* 8.6* 8.6* 7.8* 7.8* 7.1* 7.1* 6.5* 6.5* 6.0* 6.0* 5.8* 5.8* 20.35

3.2* 3.2* 5.8* 5.8* 10.4* 10.4* 14.4* 14.4* 11.9* 11.9* 10.2* 10.2* 9.0* 9.0* 8.0* 8.0* 7.2* 7.2* 6.6* 6.6* 6.1* 6.1* 5.9* 5.9* 20.15

4.2* 4.2* 6.3* 6.3* 9.8* 9.8* 14.8* 14.8* 12.3* 12.3* 10.6* 10.6* 9.2* 9.2* 8.2* 8.2* 7.4* 7.4* 6.7* 6.7* 6.2* 6.2* 6.0* 6.0* 19.83

5.2* 5.2* 7.0* 7.0* 10.0* 10.0* 15.1* 15.1* 12.6* 12.6* 10.8* 10.8* 9.4* 9.4* 8.3* 8.3* 7.5* 7.5* 6.8* 6.8* 6.2* 6.2* 19.38

6.1* 6.1* 7.7* 7.7* 10.4* 10.4* 15.1* 15.1* 12.7* 12.7* 10.9* 10.9* 9.5* 9.5* 8.4* 8.4* 7.5* 7.5* 6.7* 6.7* 6.3* 6.3* 18.80

8.5* 8.5* 11.1* 11.1* 14.8* 14.8* 12.5* 12.5* 10.8* 10.8* 9.4* 9.4* 8.3* 8.3* 7.4* 7.4* 6.5* 6.5* 6.5* 6.5* 18.08

11.8* 11.8* 14.3* 14.3* 12.2* 12.2* 10.5* 10.5* 9.2* 9.2* 8.1* 8.1* 7.1* 7.1* 6.6* 6.6* 17.19

11.5* 11.5* 10.0* 10.0* 8.7* 8.7* 7.7* 7.7* 14.80

Industrial Stick 10.00 m (Variant 3C)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

The lift capacities are stated in metric tonnes (t) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities are valid for 750 mm track flat pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic check valves on the hoist cylinders, when they are used for lifting operations which require the use of lifting accessories.

carriage

m

6.0* 6.0* 13.92

5.6* 5.6* 5.6* 5.6* 15.52

5.5* 5.5* 5.4* 5.4* 5.3* 5.3* 16.83

5.4* 5.4* 5.3* 5.3* 5.2* 5.2* 17.92

5.5* 5.5* 5.3* 5.3* 5.1* 5.1* 5.0* 5.0* 18.82

5.5* 5.5* 5.3* 5.3* 5.1* 5.1* 5.0* 5.0* 5.0* 5.0* 19.56

5.7* 5.7* 5.4* 5.4* 5.2* 5.2* 5.0* 5.0* 4.9* 4.9* 20.16

6.3* 6.3* 5.9* 5.9* 5.5* 5.5* 5.3* 5.3* 5.1* 5.1* 4.9* 4.9* 20.63

7.2* 7.2* 6.6* 6.6* 6.1* 6.1* 5.7* 5.7* 5.4* 5.4* 5.1* 5.1* 5.0* 5.0* 20.98

9.9* 9.9* 8.6* 8.6* 7.7* 7.7* 7.0* 7.0* 6.4* 6.4* 5.9* 5.9* 5.5* 5.5* 5.3* 5.3* 5.0* 5.0* 5.0* 5.0* 21.22

13.4* 13.4* 17.0* 17.0* 13.2* 13.2* 10.9* 10.9* 9.3* 9.3* 8.2* 8.2* 7.3* 7.3* 6.7* 6.7* 6.1* 6.1* 5.7* 5.7* 5.4* 5.4* 5.1* 5.1* 5.1* 5.1* 21.35

4.1* 4.1* 12.8* 12.8* 14.7* 14.7* 11.9* 11.9* 10.0* 10.0* 8.7* 8.7* 7.7* 7.7* 7.0* 7.0* 6.4* 6.4* 5.9* 5.9* 5.5* 5.5* 5.2* 5.2* 5.1* 5.1* 21.37

3.2* 3.2* 7.6* 7.6* 16.0* 16.0* 12.8* 12.8* 10.7* 10.7* 9.2* 9.2* 8.1* 8.1* 7.3* 7.3* 6.6* 6.6* 6.1* 6.1* 5.6* 5.6* 5.3* 5.3* 5.2* 5.2* 21.28

3.6* 3.6* 6.5* 6.5* 12.1* 12.1* 13.5* 13.5* 11.2* 11.2* 9.6* 9.6* 8.4* 8.4* 7.5* 7.5* 6.8* 6.8* 6.2* 6.2* 5.8* 5.8* 5.3* 5.3* 5.3* 5.3* 21.09

4.2* 4.2* 6.5* 6.5* 10.5* 10.5* 14.1* 14.1* 11.7* 11.7* 10.0* 10.0* 8.7* 8.7* 7.8* 7.8* 7.0* 7.0* 6.4* 6.4* 5.8* 5.8* 5.4* 5.4* 20.78

4.9* 4.9* 6.8* 6.8* 10.1* 10.1* 14.4* 14.4* 12.0* 12.0* 10.3* 10.3* 9.0* 9.0* 7.9* 7.9* 7.1* 7.1* 6.5* 6.5* 5.9* 5.9* 5.6* 5.6* 20.36

5.7* 5.7* 7.4* 7.4* 10.2* 10.2* 14.6* 14.6* 12.2* 12.2* 10.5* 10.5* 9.1* 9.1* 8.0* 8.0* 7.2* 7.2* 6.5* 6.5* 5.8* 5.8* 5.7* 5.7* 19.81

6.4* 6.4* 8.0* 8.0* 10.6* 10.6* 14.6* 14.6* 12.2* 12.2* 10.5* 10.5* 9.1* 9.1* 8.1* 8.1* 7.2* 7.2* 6.4* 6.4* 5.9* 5.9* 19.12

8.6* 8.6* 11.1* 11.1* 14.3* 14.3* 12.0* 12.0* 10.4* 10.4* 9.0* 9.0* 7.9* 7.9* 7.0* 7.0* 6.2* 6.2* 6.0* 6.0* 18.29

11.8* 11.8* 13.7* 13.7* 11.6* 11.6* 10.0* 10.0* 8.7* 8.7* 7.6* 7.6* 6.6* 6.6* 6.1* 6.1* 17.28

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity

R 954 C Litronic High Rise 25

Lift Capacities

with Industrial-Type Gooseneck Boom 12.50 m with Tower Elevation 1.20 m

Industrial Stick 9.00 m (Variant 3D)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

carriage

m

8.5* 8.5* 10.12

8.9* 8.9* 8.3* 8.3* 7.7* 7.7* 12.43

8.0* 8.0* 7.5* 7.5* 7.2* 7.2* 14.21

7.9* 7.9* 7.4* 7.4* 7.0* 7.0* 6.9* 6.9* 15.63

7.9* 7.9* 7.3* 7.3* 6.9* 6.9* 6.6* 6.6* 6.5* 6.5* 16.80

7.9* 7.9* 7.4* 7.4* 6.9* 6.9* 6.5* 6.5* 6.3* 6.3* 17.75

8.8* 8.8* 8.1* 8.1* 7.5* 7.5* 7.0* 7.0* 6.6* 6.6* 6.2* 6.2* 6.1* 6.1* 18.54

9.2* 9.2* 8.3* 8.3* 7.6* 7.6* 7.1* 7.1* 6.6* 6.6* 6.3* 6.3* 6.0* 6.0* 19.17

10.9* 10.9* 9.6* 9.6* 8.6* 8.6* 7.9* 7.9* 7.3* 7.3* 6.7* 6.7* 6.3* 6.3* 6.0* 6.0* 6.0* 6.0* 19.67

16.9* 16.9* 13.7* 13.7* 11.6* 11.6* 10.1* 10.1* 9.0* 9.0* 8.1* 8.1* 7.4* 7.4* 6.9* 6.9* 6.4* 6.4* 6.0* 6.0* 5.9* 5.9* 20.04

26.5* 26.5* 19.1* 19.1* 15.0* 15.0* 12.5* 12.5* 10.7* 10.7* 9.4* 9.4* 8.4* 8.4* 7.7* 7.7* 7.0* 7.0* 6.5* 6.5* 6.1* 6.1* 5.9* 5.9* 20.29

3.9* 3.9* 17.3* 17.3* 16.3* 16.3* 13.3* 13.3* 11.3* 11.3* 9.8* 9.8* 8.7* 8.7* 7.9* 7.9* 7.2* 7.2* 6.6* 6.6* 6.2* 6.2* 5.9* 5.9* 20.42

2.0* 2.0* 7.6* 7.6* 17.5* 17.5* 14.1* 14.1* 11.8* 11.8* 10.2* 10.2* 9.0* 9.0* 8.1* 8.1* 7.4* 7.4* 6.7* 6.7* 6.2* 6.2* 5.9* 5.9* 20.44

2.3* 2.3* 5.9* 5.9* 12.5* 12.5* 14.7* 14.7* 12.3* 12.3* 10.6* 10.6* 9.3* 9.3* 8.3* 8.3* 7.5* 7.5* 6.8* 6.8* 6.3* 6.3* 5.9* 5.9* 20.35

3.2* 3.2* 5.8* 5.8* 10.4* 10.4* 15.1* 15.1* 12.6* 12.6* 10.8* 10.8* 9.5* 9.5* 8.4* 8.4* 7.6* 7.6* 6.9* 6.9* 6.3* 6.3* 6.0* 6.0* 20.15

4.2* 4.2* 6.3* 6.3* 9.8* 9.8* 15.3* 15.3* 12.8* 12.8* 11.0* 11.0* 9.6* 9.6* 8.5* 8.5* 7.6* 7.6* 6.9* 6.9* 6.2* 6.2* 6.0* 6.0* 19.83

7.0* 7.0* 10.0* 10.0* 15.2* 15.2* 12.8* 12.8* 11.0* 11.0* 9.6* 9.6* 8.5* 8.5* 7.6* 7.6* 6.8* 6.8* 6.1* 6.1* 19.38

10.4* 10.4* 14.9* 14.9* 12.6* 12.6* 10.9* 10.9* 9.5* 9.5* 8.4* 8.4* 7.4* 7.4* 6.6* 6.6* 6.1* 6.1* 18.80

14.3* 14.3* 12.2* 12.2* 10.6* 10.6* 9.2* 9.2* 8.1* 8.1* 7.1* 7.1* 6.5* 6.5* 17.39

Industrial Stick 10.00 m (Variant 3D)

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m 19.5 m 21.0 m Under m

25.5 HR

24.0 HR

22.5 HR

21.0 HR

19.5 HR

18.0 HR

16.5 HR

15.0 HR

13.5 HR

12.0 HR

10.5 HR

9.0 HR

7.5 HR

6.0 HR

4.5 HR

3.0 HR

1.5 HR 0 HR – 1.5 HR – 3.0 HR – 4.5 HR – 6.0 HR – 7.5 HR

The lift capacities are stated in metric tonnes (t) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities are valid for 750 mm track flat pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic check valves on the hoist cylinders, when they are used for lifting operations which require the use of lifting accessories.

carriage

m

7.1* 7.1* 11.91

7.6* 7.6* 7.1* 7.1* 6.5* 6.5* 13.92

7.4* 7.4* 7.0* 7.0* 6.6* 6.6* 6.2* 6.2* 15.52

6.8* 6.8* 6.5* 6.5* 6.2* 6.2* 5.9* 5.9* 16.83

6.8* 6.8* 6.4* 6.4* 6.1* 6.1* 5.8* 5.8* 17.92

7.4* 7.4* 6.9* 6.9* 6.4* 6.4* 6.1* 6.1* 5.8* 5.8* 5.7* 5.7* 18.82

7.5* 7.5* 7.0* 7.0* 6.5* 6.5* 6.1* 6.1* 5.8* 5.8* 5.5* 5.5* 5.5* 5.5* 19.56

7.8* 7.8* 7.1* 7.1* 6.6* 6.6* 6.2* 6.2* 5.8* 5.8* 5.5* 5.5* 5.4* 5.4* 20.16

8.9* 8.9* 8.1* 8.1* 7.4* 7.4* 6.8* 6.8* 6.3* 6.3* 5.9* 5.9* 5.6* 5.6* 5.4* 5.4* 20.63

10.8* 10.8* 9.4* 9.4* 8.4* 8.4* 7.6* 7.6* 7.0* 7.0* 6.4* 6.4* 6.0* 6.0* 5.6* 5.6* 5.3* 5.3* 20.98

23.1* 23.1* 17.2* 17.2* 13.8* 13.8* 11.6* 11.6* 10.0* 10.0* 8.8* 8.8* 7.9* 7.9* 7.2* 7.2* 6.6* 6.6* 6.1* 6.1* 5.7* 5.7* 5.4* 5.4* 5.3* 5.3* 21.22

13.4* 13.4* 19.4* 19.4* 15.1* 15.1* 12.4* 12.4* 10.6* 10.6* 9.2* 9.2* 8.2* 8.2* 7.4* 7.4* 6.8* 6.8* 6.2* 6.2* 5.8* 5.8* 5.4* 5.4* 5.3* 5.3* 21.35

4.1* 4.1* 12.8* 12.8* 16.3* 16.3* 13.2* 13.2* 11.1* 11.1* 9.6* 9.6* 8.5* 8.5* 7.6* 7.6* 6.9* 6.9* 6.4* 6.4* 5.9* 5.9* 5.4* 5.4* 5.3* 5.3* 21.37

3.2* 3.2* 7.6* 7.6* 17.2* 17.2* 13.9* 13.9* 11.6* 11.6* 10.0* 10.0* 8.8* 8.8* 7.9* 7.9* 7.1* 7.1* 6.5* 6.5* 5.9* 5.9* 5.5* 5.5* 5.4* 5.4* 21.28

3.6* 3.6* 6.5* 6.5* 12.1* 12.1* 14.4* 14.4* 12.0* 12.0* 10.3* 10.3* 9.0* 9.0* 8.0* 8.0* 7.2* 7.2* 6.6* 6.6* 6.0* 6.0* 5.4* 5.4* 5.4* 5.4* 21.09

4.2* 4.2* 6.5* 6.5* 10.5* 10.5* 14.7* 14.7* 12.3* 12.3* 10.5* 10.5* 9.2* 9.2* 8.1* 8.1* 7.3* 7.3* 6.6* 6.6* 6.0* 6.0* 5.5* 5.5* 20.78

4.9* 4.9* 6.8* 6.8* 10.1* 10.1* 14.8* 14.8* 12.4* 12.4* 10.6* 10.6* 9.3* 9.3* 8.2* 8.2* 7.3* 7.3* 6.6* 6.6* 5.9* 5.9* 5.5* 5.5* 20.36

7.4* 7.4* 10.2* 10.2* 14.7* 14.7* 12.4* 12.4* 10.6* 10.6* 9.3* 9.3* 8.2* 8.2* 7.2* 7.2* 6.5* 6.5* 5.7* 5.7* 5.5* 5.5* 19.81

10.6* 10.6* 14.3* 14.3* 12.1* 12.1* 10.4* 10.4* 9.1* 9.1* 8.0* 8.0* 7.1* 7.1* 6.2* 6.2* 5.6* 5.6* 19.12

13.6* 13.6* 11.6* 11.6* 10.0* 10.0* 8.7* 8.7* 7.6* 7.6* 6.7* 6.7* 6.6* 6.6* 16.64

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity

26 R 954 C Litronic High Rise

Choice of Cab Elevation and Cab Protection

C2

B2

C1 B1

D2

D1

D2

D1

Hydraulic Cab Elevation Parallelogram + Intermediate Piece 0,5 m

B1 5,850 mm B2 9,420 mm C1 6,345 mm C2 9,915 mm D1 2,850 mm D2 3,000 mm

Hydraulic Cab Elevation with Double Parallelogram

B1 5,495 mm B2 9,255 mm C1 5,990 mm C2 9,755 mm D1 3,080 mm D2 4,415 mm

Additional weight in relation to hydraulic cab elevation parallelogram + intermediate piece 0.5 m: 2,500 kg

C1 B1

FOPS Guard Front Guard

R 954 C Litronic High Rise 27

Variety of Tools

Shells for loose material with

Shells for Loose Material Clamshell Model 22 C

cutting edge (without teeth) Cutting width of shells mm 1,500 1,500 Capacity m Total weight kg 2,500 2,600

Multiple Tine Grapples open tines semi-closed tines closed tines

Grapple model 72 C Capacity m

(4 tines) Weight kg 2,090 2,140 2,160 2,410 2,470 2,510 2,700 2,760 2,810 Grapple model 72 C Capacity m (5 tines) Weight kg 2,520 2,570 2,590 2,920 2,990 3,040 3,020 3,100 3,160

3

1.85 2.20

3

1.20 1.40 1.60 1.20 1.40 1.60 1.20 1.40 1.60

3

1.20 1.40 1.60 1.20 1.40 1.60 1.20 1.40 1.60

Crane Hook with Suspension

Max. load t 32 Total weight kg 180

Electro Magnets with Suspension

Magnet information on request

28 R 954 C Litronic High Rise

Equipment

Undercarriage

Three track guide per track • Lifetime lubricated track rollers • Tracks sealed and greased • Idler protection • Two-stage travel motors •

Uppercarriage

Wide walkways and handrails • Maintenance-free swing brake lock • Handrails, Non slip surfaces • Main switch for electric circuit • Engine hood with lift help • Pedal controlled positioning swing brake • Sound insulation • Maintenance-free HD-batteries • Lockable tool box • Tool kit • Electric fuel tank filler pump + Customized colors +

Hydraulics

Hydraulic tank shut-off valve • Pressure compensation • Hook up for pressure checks • Pressure storage for controlled lowering of attachments with engine turned off • Filter with integrated fine filter area (5 µm) • Electronic pump regulation • Stepless mode system (ECO) • Four different power modes adjustable • Extra hydr. control for hydr. swivel + Hydraulic drive for generator + Full flow micro filtration + Bio degradable hydraulic oil +

Engine

Turbo charger • After-cooled • Sensor controlled engine idling • Air filter with automatic dust ejector • Unit pump system • Dry-type air cleaner w/pre-cleaner, main and safety element • Reversible radiator fan +

Operator’s Cab

Storage tray • Displays for engine operating condition • Mechanical hour meters, readable from outside the cab • Roof hatch • Removable handles for travel pedals • 6-way adjustable seat • Seat and consoles independently adjustable • Removable customized foot mat • Dome light • Cab heater with defroster • Cloth hook • Air conditioning • Rain hood over front window opening • All tinted windows • Door with sliding window • Sun roller blind • Wiper/washer • Cigarette lighter and ashtray • Airpressure operator seat with heating and head-rest + Extinguisher + Electric cool box + Bullet proof window (fixed installation – can not be opened) + Stereo radio + Preparation for radio installation + Beacon + Auxiliary heating + Electronic drive away lock + Additional flood lights +

Attachment

Flood lights • Hydr. lines for clam operation in stick • Sealed pivots • Liebherr semi-automatic central lubrication system • Safety check valves on hoist cylinder, regenerative • Safety check valves on stick cylinder, regenerative • Hose quick connection • Cylinders with shock absorber • Hydraulic or manual quick change tool adapter + Industrial-type gooseneck sticks with remote hydraulic pin puller + Safety lift hook + Liebherr line of clams + Liebherr fully-automatic central lubrication system + Customized colors + Overload warning device +

• = Standard, + = Option

Options and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr to retain warranty.

R 954 C Litronic High Rise 29

Liebherr-France SAS

2 avenue Joseph Rey, B.P. 90287, F-68005 Colmar Cedex  +33 389 21 30 30, Fax +33 389 21 37 93 www.liebherr.com, E-Mail: info.lfr@liebherr.com

Printed in Germany by DWS RG-BK LFR/SP 10471744-2-03.10_enGB All illustrations and data may differ from standard equipment. Subject to change without notice. All indicated loads are based in accordance with ISO 9248.

Liebherr R954C User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual