Design Guide 2015-06
Freestanding / Semi Built-In Models 24" and 48"
Welcome
Liebherr's engineering excellence in Germany provides the largest
selection of freezers, refrigerators and wine refrigerators worldwide.
Liebherr appliances consistently specializes in the manufacturing of high
quality freezers and refrigerators. With more than 300 basic models, we have
the widest selection in the world. Liebherr appliances feature premium quality,
numerous innovative product ideas and advanced design. Liebherr freezers and
refrigerators are manufactured at three modern production plants:
Liebherr Marica in Bulgaria, Liebherr-Hausgeräte Ochsenhausen GmbH in
Germany and the Liebherr-Hausgeräte Lienz GmbH in Austria.
The appliances for the North American market are produced in Austria and in
Germany.
Liebherr is commited to the protection of the environment and recognizes it
as a critical priority. To guarantee an optimum and consistent implementation,
all ecological aspects were observed and integrated into the quality control of
Liebherr in compliance with DIN EN ISO 9001.
Liebherr's Commitment to the Environment
The components of Liebherr products can be recycled when the necessary
resources are applied. A concern for the environment and a desire to protect
resources has lead to increased levels of recycling year after year. When
Liebherr manufactures products, it is essential that the recyclable recovery rate
of the materials we use constantly increases.
Recycling is a common goal among all manufacturers, municipalities and
recycling companies to protect our environment. Protecting the environment
and producing products which have a low impact on the environment, is one
of Liebherr's core values. Whether you are replacing a unit or starting fresh,
remember to dispose of your old appliance in an environmentally safe and
friendly manner.
Introduction
LIEBHERR WARRANTY PLAN
FULL TWO YEAR WARRANTY - For two years from the date of original purchase, your Liebherr Warranty
covers all parts and labor to repair or replace any part of the product which proves to be defective in materials or workmanship.
FULL FIVE YEAR WARRANTY - For five years from the date of original purchase, your Liebherr Warranty
covers all parts and labor to repair or replace any components that prove to be defective in materials or
workmanship in the sealed system. The "Sealed System" means only the compressor, condenser, evaporator, drier and all connecting tubing.
LIMITED 6TH THROUGH 12TH YEAR WARRANTY - From the 6th through 12th year from the date of
original purchase, your Liebherr Warranty covers all parts that prove to be defective in materials or workmanship in the sealed system (parts only).
For Service and Parts in the U.S.:
Customer Service
If your appliance is not working properly, or if the temperature display reads "F0" to "F9”, please call the
numbers listed below.
Give the fault number displayed, together with the
Type Designation,
Service Number and
Appliance Number (Serial Number)
from the model plate, to ensure prompt, accurate servicing. The model plate is located inside the appliance.
Leave the appliance door closed until the customer service technician arrives to minimize any further cold loss.
PlusOne Solutions, Inc.
3501 Quadrangle Blvd, Suite 120
Orlando, FL 32817
Toll Free: 1-866-LIEBHER or
1-866-543-2437
Service-appliances.us@liebherr.com
www.liebherr-appliances.com
For Service and Parts in Canada:
Euro-Parts Canada
39822 Belgrave Road,
BELGRAVE, Ontario, N0G 1E0
Phone: (519) 357-3320
Fax: (519) 357-1326
Toll Free: 1-888-LIEBHER or
1-888-543-2437
www.euro-parts.ca
Need help?
For design related inquiries not addressed in this
Design Guide please email install.americas@
liebherr.com
Contents
General Remarks
I. Safety Warnings ........................................................................................................................................ 1
II. Electrical Requirements & Safety ........................................................................................................... 2
III. IceMaker (if equipped) ............................................................................................................................ 2
IV. Area Requirements .................................................................................................................................. 3
V. Safety Regulations ................................................................................................................................... 3
Freestanding/Semi Built In Models
24" and 48" Models: CS 1311 / CS 1360, SBS 26S1, CS 1200, CS 1350B ................................................ 4
Unit Dimensions ........................................................................................................................................ 8
Kitchen cabinet setup for the water filter .................................................................................................. 9
Cabinet Opening Dimensions: CS 1311, CS 1360, CS 1200, CS 1350B ................................................. 10
Cabinet Opening Dimensions: SBS 26S1 ................................................................................................. 11
Ventilation Requirements .......................................................................................................................... 13
Top Door Hinge Clearance CS 13.. - SBS 26S1 ....................................................................................... 14
Top Door Hinge Clearance CS1200 .......................................................................................................... 15
Door Swing Clearance CS 1200, CS 13.. - SBS 26S1 ............................................................................. 16
Accessories for Liebherr Freestanding - Semi Built In Appliances ........................................................... 17
General Remarks
I. Safety Warnings
PLEASE READ AND FOLLOW THESE INSTRUCTIONS
This design guide contains Warning and Caution statements. This information is important for safe and
efficient installation.
This design guide is not replacing the use and care manual which contains important information on how to use Liebherr appliances.
Always read and follow all Warning and Caution statements!
States a hazard that may cause serious injury or death if precautions are not followed.
Signals a situation where minor injury or product damage may occur if you do not follow instructions.
States a hazard will cause serious injury or death if precautions are not followed.
IMPORTANT
This highlights information that is especially relevant to a problem-free installation.
Make sure incoming voltage is the same as the unit rating.
To reduce the risk of fire, electric shock, or personal injury, the installation work and electrical wiring must be done by
a qualified electrician in accordance with all applicable codes and standards, including fire rated construction.
To the Installer
It is very important that the guidelines and instructions are followed in this design guide to ensure proper installation and operation of the unit. The Installation Guidelines section contains important information for making sure the
installation is correct. Read and understand all the information and installation guidelines in this manual before the
unit is installed.
It is also very important to know the Safety Information.
1
General Remarks
II. Electrical Requirements & Safety
A 115 Volt, 60 Hz, 15 Amp (20 Amp for side-by-side
installation) fused electrical supply is required. Connect
undercounter wine cabinet to a 115 VAC, 10 amp (15
Amp for side-by-side installations) circuit that is controlled by a circuit breaker or fuse.
We recommend using a dedicated circuit for these appliances to prevent electrical overload. Comply with
the National Electrical Code as well as local codes and
ordinances when installing the receptacle.
The power cord is equipped with a three-prong (grounding) plug for your protection against possible shock
hazards. To maintain this protection:
• Do not modify the plug by removing the round grounding prong.
• Do not use a power cord that is frayed or damaged.
Do not ground to a gas pipe. Check with a
qualified electrician if you are not sure the
appliance is properly grounded. Do not have
a fuse in the neutral or grounding circuit.
ELECTROCUTION HAZARD
Electrical Grounding Required. This
appliance is equipped with a threeprong(grounding) polarized plug for your
protection against possible shock hazards.
• DO NOT remove the round grounding
prong from the plug.
• DO NOT use a two-prong grounding
adapter.
• DO NOT use an extension cord to connect
power to the unit.
III. IceMaker (if equipped)
The icemaker is located in the freezer compartment.
It must be connected to the water supply to function
properly. The appliance must be level for the icemaker to
function properly.
The water supply pressure requirements are different
based on whether or not the supplied Liebherr water filter
is installed. With the filter installed, the pressure must be
in the range of 40-90 psi (2.8-6.2 bar). Without the filter
installed the acceptable pressure range is 22-87 psi (1.5-6
bar).
Use a 1/4" OD copper line to connect the water supply to
the solenoid valve. This is not supplied with the refrigerator.
If you have hard water, we recommend you install a
water softener. Also, a filter must be installed if the water
contains solids such as sand. All equipment and devices
used to supply the water to the appliance must comply
with the current regulations for your geographical area.
Safety Instructions and Warnings
• Do not attach the water source while the appliance is
connected to an electrical outlet.
• A shut-off valve, must be installed between the hose
line and the main water supply so that the water supply can be stopped if necessary. Do not install the
shut-off valve behind the refrigeration unit.
• The connection to the water supply may only be made
by a trained and licensed plumber.
• The water quality must comply with the drinking water
regulations for the geographical area where the appliance is located.
• The icemaker is designed exclusively to make ice
cubes in quantities needed by a household and may
only be operated with water appropriate for this purpose.
• All repairs and work on the icemaker may only be done
by customer service personnel or other trained personnel.
• The manufacturer cannot accept liability for damage
caused by equipment or water lines between the solenoid valve and the water supply.
2
Loading...