LG SPK8-S Quick Guide

SIMPLE MANUAL

MFL70420306

Wireless Rear Speakers Kit

ENGLISHENGLISH

Please read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit.

LG Customer Information Center

1-800-243-0000 USA, Consumer 1-888-865-3026 USA, Commercial

www.lg.com

Printed in China

SPK8-S.DUSALLK_SIM_MFL70420306.indd 1-2 2018-01-09  9:20:03

MODEL

SPK8-S

www.lg.com

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

yReorient or relocate the receiving antenna. yIncrease the separation between the equipment and the

receiver.

yConnect the equipment to an outlet on a circuit

different from that to which the receiver is connected.

yConsult the dealer or an experienced radio/TV

technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modications in construction of this device

which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement : This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the

antenna and your body. Users must follow the specic

operating instructions for satisfying RF exposure compliance.

FCC Radio Frequency Interference Requirements :

High power radars are allocated as primary users of the

5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. This device cannot be co-located with any other transmitter.

Responsible Party :

LG Electronics USA, Inc. 1000 Sylvan Ave Englewood Cliffs, NJ 07632 Tel: 1-800-243-0000

Rear Speakers Connection1

Speaker design and connection method may be different according to models.

Transparent

Black stripe

Rear speaker

(Left)

Wireless Receiver

Black stripe

Transparent

Rear speaker (Right)

a Connect the speaker cables to rear speakers

correctly.

b Connect the Wireless Receiver and the rear

speakers (Grey: right, Blue: left) with the speakers cables.

c Turn on the Surround function to enjoy surround

sound.

Wireless Receiver Connection2

a Connect the power cord of the wireless receiver

to the AC outlet.

b Turn on the unit: The unit and wireless receiver

will be automatically connected. The receiver's yellow - green LED turns on

Wireless Receiver Connection Manually

If the rear speakers do not make sound, try to connect manually.

a Press PAIRING button on the rear of the

wireless receiver.

yThe yellow - green LED on the wireless receiver

blinks quickly.

b Turn on the main unit. c Pairing is completed.

yThe yellow - green LED on the wireless receiver

turns on.

Surround Sound On/Off

When you turn on surround function, you can enjoy magnificent surround sound for all the input sound source with rear speakers.

The initial setting for the surround function is OFF, turn the surround function ON to use it.

SK5Y

Surround On: Press and hold REAR

o button on the

remote control about 2 seconds.

Surround Off: Press and hold REAR

p button on the

remote control about 2 seconds.

SK10Y/SK9Y/SK8Y/SK6Y

Surround On: Press and hold AUTO VOL button on the remote control about 2 seconds and then press AUTO VOL button repeateadly to select ON - SURROUND in the display window.

Surround Off: Press and hold AUTO VOL button on the remote control about 2 seconds and then press AUTO VOL button repeateadly to select OFF - SURROUND in the display window.

Additional Information

Specication of Wireless receiver

Power requirement

Power consumption

Dimensions (W x H x D)

Design and specications are subject to change

without notice.

About Ferrite Core (Optional)

twice

Refer to the main label on the wireless receiver.

Approx.

60.0 mm x 220.0 mm x

175.0 mm (2.4 inch x 8.7 inch x

6.9 inch)

SPK8-S.DUSALLK_SIM_MFL70420306.indd 3-4 2018-01-09  9:20:05