LG SOUNDPLATE 240, LAP240-NB User Manual

OWNER’S MANUAL

SoundPlate 240

ENGLISH

DEUTSCH

FRANÇAIS

NEDERLANDS

SLOVENŠČINA

ITALIANO ESPAÑOL

Please read this manual carefully before operating
your set and retain it for future reference.

SOUNDPLATE240

www.lg.com

LAP240-NB_DDEULLK_ENG.indd 1 2014-03-06  5:45:26

ΕΛΛΗΝΙΚΑ

PORTUGUÊS

1 Getting Started

Getting Started2

Safety Information

1

Getting Started

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.

CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This lightning ash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sucient magnitude to constitute a
risk of electric shock to persons.

The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the
product.

WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built­in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon
a dedicated circuit;

That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
centre. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.

NOTICE: For Product Identication and
Compliance/Safety labeling information please
refer to Main label on the bottom of unit.

LAP240-NB_DDEULLK_ENG.indd 2 2014-03-06  5:45:27

Getting Started 3

This device is equipped with a portable battery or
accumulator.

Safety way to remove the battery or the
battery from the equipment: Remove the

old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, re or the like.

Disposal of your old appliance

1. When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by
the European Directive 2002/96/EC.

2. All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or
the local authorities.

3. The correct disposal of your
old appliance will help prevent
potential negative consequences
for the environment and human
health.

4. For more detailed information about
disposal of your old appliance,
please contact your city office,
waste disposal service or the shop
where you purchased the product.

Disposal of waste batteries/accumulators

1. When this crossed-out wheeled
bin symbol is attached to batteries/
accumulators of Your product
it means they are covered by
European Directive 2006/66/EC.

2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the
battery Contains more that 0.0005%
of mercury,0.002% of cadmium or

0.004% of lead.

3. All batteries/accumulators should
be disposed separately from
the municipal waste stream via
designated collection facilities
appointed by the government or
the local authorities.

4. The correct disposal of Your old
batteries/accumulators will help
to prevent potential negative
consequences for the environment,
animal and human health.

5. For more detailed information
about disposal of Your old batteries/
accumulators, please contact Your
city office, waste disposal service or
the shop where You purchased the
product.

1

Getting Started

LAP240-NB_DDEULLK_ENG.indd 3 2014-03-06  5:45:28

Getting Started4

Europe Notice

LG Electronics hereby declares that this/these

1

product(s) is/are in compliance with the essential

Getting Started

requirements and other relevant provisions of
Directive 1999/5/EC, 2004/108/EC, 2006/95/EC,
2009/125/EC and 2011/65/EU.

Please contact to the following address for
obtaining a copy of the DoC (Declaration of
Conformity).

Contact oce for compliance of this product :

LG Electronics Inc.
EU Representative, Krijgsman 1,
1186 DM Amstelveen, The Netherlands

yPlease note that this is NOT a Customer Service

contact point. For Customer Service Information,
see Warranty Card or contact the dealer that you
purchased this product.

Indoor Use Only

RF Radiation Exposure Statement

This equipment should be installed and operated
with minimum distance 20 cm between the
radiator and your body.

LAP240-NB_DDEULLK_ENG.indd 4 2014-03-06  5:45:28

Table of Contents

Table of Contents 5

1 Getting Started

2 Safety Information
6 Unique features
6 Introduction
6 Accessories
7 Front panel
7 Rear panel
8 Remote control
10 Setting up the unit

2 Operating

13 Basic operations
13 – Optical input operation
13 – LG Sound Sync
14 – AUTO POWER On/Off
15 – Auto function change
16 Using Bluetooth technology
16 – Listening to music stored on the

Bluetooth devices
17 Using Bluetooth App
17 – Install “LG Bluetooth Remote” App

onto Your Bluetooth Device
18 – Activate Bluetooth with “LG Bluetooth

Remote” App
19 Setting sound effect

1

2

3

4

3 Troubleshooting

20 Troubleshooting

4 Appendix

21 Trademarks and licenses
22 Specifications
23 Maintenance
23 – Handling the unit

LAP240-NB_DDEULLK_ENG.indd 5 2014-03-06  5:45:29

Getting Started6

Unique features

LG Sound Sync

1

Getting Started

Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.

Bluetooth

Enjoys music from bluetooth device with simple
connection.

LG Bluetooth Remote

"LG Bluetooth Remote" is an App designed to
let you take control of some of LG’s latest Audio
devices.

Introduction

Symbols used in this manual

Note

,

Indicates special notes and operating features.

Caution

>

Indicates cautions for preventing possible damages
from abuse.

Accessories

Please check and identify the supplied accessories.

Designs and specications of the accessories are
subject to change without prior notice.

Remote Control (1) Battery (1)

Power cord (1) Cable ties for arranging

cables (2)

Cable holder (1) Screw (2)

LAP240-NB_DDEULLK_ENG.indd 6 2014-03-06  5:45:33

Getting Started 7

Front panel

Remote sensor

A

LED indicator

B

You can check the current state of the unit by the color LED on it. Refer to the table below.

LED Color

LED State

O Disconnected power cord

On Standby Bluetooth paired

Blink

(Twice rapidly)

Blink

(Twice per second)

Blink

(Once per second)

Red Orange Green White

Optical function

selected

Sound eect

(Standard) is

selected.

Booting Bluetooth ready -

Mute - - -

-

Sound eect

(Music) is
selected.

1

Getting Started

LG sound sync

(LG TV) paired

Sound eect

(Cinema) is

selected.

LG sound sync

(LG TV) ready

Rear panel

(Standby/On)

A 1/!

B

LAP240-NB_DDEULLK_ENG.indd 7 2014-03-06  5:45:35

(Volume)

o/p

Adjusts speaker volume.

F (Function)
Press it repeatedly to select other function.

AC power input

AUTO POWER ON/OFF

C

Turns on or o AUTO POWER function.

Optical input

D

Getting Started8

Remote control

1

Getting Started

Switches the unit ON or OFF.

Select sound eect.

Reduce the sound volume.

Mutes or unmutes the sound.

Select LG TV function.

Note

,

yOnce the unit is shut down to standby,

please wait several seconds before trying to
use remote again.

yWhen you press any button on the remote

control, the red LED on the main unit blinks
twice. (Except 1(Power), SOUND EFFECT)

yThe red LED on Unit will be lit If the volume

level is adjusted between minimum to
maximum.

yThe color LED that indicates the current

function is lit up.

yThe red LED blinks twice rapidly when the

sound eect (Standard) is selected.

yThe green LED blinks twice rapidly when the

sound eect (Music) is selected.

yThe white LED blinks twice rapidly when the

sound eect (Cinema) is selected.

Increase the sound volume.

Select Optical function.

Select Bluetooth function.

LAP240-NB_DDEULLK_ENG.indd 8 2014-03-06  5:45:36

Getting Started 9

Battery installation

Caution

>

Do not open the battery cover by using your
nger. Or else, your nail could break.

1. Turn the battery cover counterclockwise by

using a coin. Then remove the battery cover.

2. Insert and fix the battery with the minus (-)

facing in the same direction as the minus (-) on
the battery compartment.

+

3. Put the battery cover on the remote control and
turn it clockwise to close.

Warning

!

yDO NOT INGEST BATTERY. CHEMICAL BURN

HAZARD.

yThe battery used in this device may present a

re or chemical burn hazard if mistreated. Do
not recharge, disassemble, incinerate, or heat
above 100 °C (212 °F). Replace the battery part
no. CR2025 only. Use of another battery may
present a risk of re or explosion. Dispose of used
battery. Keep battery away from children. Do not
disassemble or dispose of in re.

y[The remote control supplied with] This product

contains a coin/button cell battery. If the coin/
button cell battery is swallowed, it can cause
severe internal burns in just 2 hours and can lead
to death. Keep new and used batteries away
from children. If the battery compartment does
not close securely, stop using the product and
keep it away from children. If you think batteries
might have been swallowed or placed inside
any part of the body, seek immediate medical
attention.

1

Getting Started

LAP240-NB_DDEULLK_ENG.indd 9 2014-03-06  5:45:38

Getting Started10

Setting up the unit

This unit is designed to be positioned under your
TV.

1

Getting Started

Before setting up this system with your TV, make
sure your TV's specications.

yWeight

Max. 18 kg

Caution

>

yDo not try to set up this unit alone. It may

need at least 2 persons to lift your TV.
Otherwise it may result in a personal injury
and/or property damages.

yDo not connect a CRT type TV to this unit.

Because this unit contains magnetic parts,
color irregularity may occur on the TV
screen.

yDo not put the other objects except a TV or

a monitor on the unit.

yThe unit must be set up on a stable and

horizontal surface.

yDo not put any other object between the

unit and the supporting furniture when you
set up the unit.

Recommendation

,

It is recommended to set up the unit on a
suciently rm and horizontal surface.

1. Remove the protection caps for woofer from
the bottom of this unit.

ySize of the base

Max. 530 mm

2. Place the unit on the position where you want
to place your TV.

Max. 270 mm

LAP240-NB_DDEULLK_ENG.indd 10 2014-03-06  5:45:41

Getting Started 11

3. Connect the optical cable and the power cord
to the unit.

4. Connect another end of optical cable
connecting the unit to your TV.

Note

,

You can arrange the cables of the unit.

1. Fix the cable holder with screws.

2. Arrange the cables as the below.

1

Getting Started

5. Place your TV on the centre of the unit.

6. Plug in the power cord of the unit.

LAP240-NB_DDEULLK_ENG.indd 11 2014-03-06  5:45:44

Getting Started

Getting Started12

Caution

>

yDo not place your TV on the edge of this

unit. Otherwise it may result in a personal
injury and/or property damages.

1

yIf your TV is over recommended weight

(max 18 kg) or has a Base larger in area than
the Unit do NOT place TV on the Unit.

-In this case, it is recommended to place this
system in another location such as on the
shelf under the TV.

How to Affix the Ferrite Core
(Optional)

You may need to attach Ferrite core in order to
reduce or eliminate any electrical interference.

1. Open

2. Wind (Once)

3. Close

LAP240-NB_DDEULLK_ENG.indd 12 2014-03-06  5:45:49

2 Operating

Operating 13

Basic operations

Optical input operation

Note

,

Before operating this Unit it is advised to turn
OFF TV speaker Sound as it may create sound
dierences between the 2 products running
simultaneously.
Refer to TV menu/Specications and select
from below methods :

-Mute your TV.

-Select [O ] on the TV sound setup menu
not to output the sound through the TV.

-Select [Optical output] on the TV sound
setup menu to listen to the sound through
this unit.

1. Connect your TV to the unit by using an optical
cable. (Refer to the pages 10 - 11.)

2. Turn on the unit by pressing 1 (Power) on the
remote control.

3. Select OPTICAL function by using OPTICAL on
the remote control.

Green LED on the unit is lit up and you can

listen to the TV's sound.

Note

,

ySet up the sound output of TV to listen to

the sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [External speaker (Optical)]

yDetails of TV setting menu vary depending

on the manufacturers or models of your TV.

LG Sound Sync

You can control some functions of this unit by
your TV's remote control with LG Sound Sync. It
is compatible with the LG TV that is supported LG
Sound Sync. Make sure of the LG Sound Sync logo
on your TV.

Controllable function by LG TV's remote control :
Volume up/down, mute

Refer to the TV's instruction manual for the details
of LG Sound Sync.

Make one of the following connections, depending
on the capabilities of your equipment.

Note

,

yYou can also use the remote control of

this unit while using LG Sound Sync. If you
use TV's remote control again, the unit
synchronizes with the TV.

yWhen the connections failed, make sure of

the condition of the TV and power of it.

yMake sure of the condition of this unit and

the connection in the cases below when
using LG Sound Sync.

-Turned o the unit.

-Changing the function to the others.

-Disconnecting the optical cable.

-Disconnecting the wireless connection
caused by interference or a distance.

yThe amount of time to turn o this unit is

dierent depending on your TV when you
set AUTO POWER function to ON.

yVolume controls dier slightly depending

on what you use among the supplied
remote control, LG TV's remote control or “LG
Bluetooth Remote” app.

2

Operating

LAP240-NB_DDEULLK_ENG.indd 13 2014-03-06  5:45:50

Operating14

With wired connection

1. Connect your LG TV to the unit by using an
optical cable. (Refer to the pages 10 - 11.)

2. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [LG Sound Sync (Optical)]

3. Turn on the unit by pressing 1 (Power) on the

2

Operating

remote control.

4. Select OPTICAL function by using OPTICAL on
the remote control.

Green LED on the unit is lit up and you can

listen to the TV's sound.

With wireless connection

1. Turn on the unit by pressing 1 (Power) on the
remote control.

2. Select LG TV function by using LG T V on the
remote control. Then white LED on the unit
starts to blink.

3. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [LG Sound Sync (Wireless)]

When connection is completed normally

between this unit and your TV, white LED on
the unit is lit up.

Note

,

yIf you turned o the unit directly by pressing

(Power), LG Sound Sync (Wireless) will

1

be disconnected. To use this function again,
you should reconnect the TV and the unit.

yDetails of TV setting menu vary depending

on the manufacturers or models of your TV.

yThe device with Bluetooth® wireless

technology will be disconnected, if Sound
Sync function is selected. “LG Bluetooth
Remote” app you’ve already connected is
disconnected either.

AUTO POWER On/Off

This unit automatically turns on by an input source :
Optical, LG TV or Bluetooth.

When you turn on your TV or an external device
connected to this unit, this unit recognizes the
input signal and select the suitable function. You
can hear the sound from your device.

If you try to connect your Bluetooth device, this unit
turns on and ready to pair. Connect your Bluetooth
device and play your music.

You can turn on or o AUTO POWER function by
using AUTO POWER ON/OFF switch on the rear
panel of the unit.

Note

,

yAfter the unit is turned on by AUTO POWER

function, it will be automatically turned o if
there is no signal for a certain period of time
from the TV connected by LG Sound Sync
(Optical/Wireless).

yAfter the unit is turned on by AUTO POWER

function, it will be automatically turned o if
there is no signal for a certain period of time
from the external device.

yAUTO POWER function is initially turned on.

yIf you turned o the unit directly, it cannot

be turned on automatically by AUTO POWER
function. However the unit can be turned
on by AUTO POWER function when optical
signal comes in after 5 seconds of no signal.

yDepending on the connected device, this

function may not operate.

yWhen booting this unit on LG TV fucntion,

it takes about 25 seconds to turn it on and
the red LED is blinking twice per second.
During that time, you cannot control this
unit except turn it o.

yIf you used Bluetooth or LG TV function

before turning o this unit, the unit keeps
the current function when Bluetooth or LG
TV signals comes in.
Besides, if you used optical function, this
unit turns on Bluetooth function when LG
TV signal comes in.

LAP240-NB_DDEULLK_ENG.indd 14 2014-03-06  5:45:50

Auto power down

This unit will turn itself o to save electric
consumption in the case were main unit is not
connected to external device and is not used for
20 minutes.

Auto function change

This unit recognizes Bluetooth or optical signals
and changes suitable function automatically.

When optical signal comes in

When you turn on the external device connected
to this unit by an optical cable, this unit change the
function to optical. You can hear the sound from
your device.

When you try to connect Bluetooth
device

When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.

Note

,

yTo change to optical function, it needs 5

seconds of no signal.

yIf you are using LG TV function, this unit

does not react to the Bluetooth connection.

Operating 15

2

Operating

LAP240-NB_DDEULLK_ENG.indd 15 2014-03-06  5:45:50

Operating16

Using Bluetooth
technology

About Bluetooth

Bluetooth is wireless communication technology
for short range connection.

The sound may be interrupted when there is

2

interference by the other electronic waves which

Operating

run on same frequency or if you connect bluetooth
devices in the other rooms nearby.

Connecting individual devices under Bluetooth®
wireless technology does not incur any charges. A
mobile phone with Bluetooth® wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth® wireless technology.

Available Devices : Mobile phone, MP3, Laptop,
PDA etc.

Bluetooth profiles

In order to use Bluetooth® wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.

A2DP (Advanced Audio Distribution Profile)

Listening to music stored on
the Bluetooth devices

Pairing this unit and Bluetooth
device

Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.

1. Select the Bluetooth function by using h on
the remote control. Then the orange LED on the
unit starts to blink.

2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as “LG SOUND PLATE
(XX:XX)”.

Note

,

yXX:XX means the last four digits of BT

address. For example, if your unit has a
BT address such as 9C:02:98:4A:F7:08,
you will see “LG SOUND PLATE (F7:08)” on
your Bluetooth device.

yDepending on the Bluetooth device type,

some device have a dierent pairing way.
Enter the PIN code (0000) as needed.

3. The orange LED is lit up when this unit
successfully paired with your Bluetooth device.

4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.

LAP240-NB_DDEULLK_ENG.indd 16 2014-03-06  5:45:51

Note

,

yWhen using Bluetooth® technology, you

have to make a connection between the
unit and the bluetooth device as close as
possible and keep the distance.
However it may not work well in the case
below :

-There is a obstacle between the unit and
the bluetooth device.

-There is a device using same frequency
with Bluetooth® technology such as a
medical equipment, a microwave or a
wireless LAN device.

yThis unit supports Bluetooth auto pairing.

However it does not operate in the case
below :

-When you restart this unit.

-When you return to Bluetooth function
after using LG TV function.

yThe sound may be interrupted when

the connection interfered by the other
electronic wave.

yYou cannot control the Bluetooth device

with this unit.

yPairing is limited one Bluetooth device per

one unit and multi-pairing is not supported.

yDepending on the type of the device,

you may not be able to use the Bluetooth
function.

yYou can enjoy wireless system using phone,

MP3, Notebook, etc..

yThe more distant between the unit and

the bluetooth device, the lower the sound
quality becomes.

yBluetooth connection will be disconnected

when the unit is turned o or the bluetooth
device gets far from the unit.

yWhen Bluetooth connection is

disconnected, connect the bluetooth device
to the unit again.

yWhen not connected the Bluetooth, orange

LED is blinking.

Operating 17

Using Bluetooth App

Note

,

Only Android OS is available to use “LG
Bluetooth remote” app with this unit.

About “LG Bluetooth Remote” App

“LG Bluetooth Remote” app brings a suite of new
features to this unit.

To enjoy more features, you are recommended to
download and install free “LG Bluetooth Remote”
app.

Install “LG Bluetooth Remote”
App onto Your Bluetooth
Device

There are two ways to install“ LG Bluetooth Remote”
App onto Your Bluetooth Device.

Install “LG Bluetooth Remote” App
through QR code

1. Install “LG Bluetooth Remote” app through QR
code. Use the scanning software to scan the QR
code.

2. Tap an icon for installation.

3. Tap an icon for downloading.

Note

,

yMake sure that your Bluetooth device is

connected to the Internet.

yMake sure that your Bluetooth device has a

scanning software application. If you don’t
have one, download one from “Google
Android Market (Google Play Store)”.

2

Operating

LAP240-NB_DDEULLK_ENG.indd 17 2014-03-06  5:45:51

Operating18

Install “LG Bluetooth Remote” App
through “Google Android Market
(Google Play Store)”

1. Tap the “Google Android Market (Google Play
Store)” icon.

2. In the search bar, type in the “LG Bluetooth
Remote” and search it.

3. In the search result list, find and tap “LG

2

Operating

Bluetooth Remote” to start downloading
Bluetooth app.

4. Tap an icon for installation.

5. Tap an icon for downloading.

Note

,

yMake sure that your Bluetooth device is

connected to the Internet.

yMake sure that your Bluetooth device is

equipped with “Google Android Market
(Google Play Store)”.

Activate Bluetooth with “LG
Bluetooth Remote” App

“LG Bluetooth Remote” app helps to connect your
bluetooth device to this unit.

1. Tap “LG Bluetooth Remote” app icon on the
home screen to open “LG Bluetooth Remote”
app, and go to the main menu.

2. Tap [Setting] and select the unit you want.

3. If you want to get more information to operate,
tap [Setting] and [Help].

Note

,

y“LG Bluetooth Remote” app will be available

in the software version as follow;

-Android O/S : Ver 2.3.3 (or later)

yThis unit does not support the multi-pairing.

If this unit is already connected with other
Bluetooth device, disconnect that device
and then try again.

yIf you use “LG Bluetooth Remote” app for

operation, there would be some dierences
between “LG Bluetooth Remote” app and the
supplied remote control. Use the supplied
remote control as necessary.

yDepending on the Bluetooth device, “LG

Bluetooth Remote” app may not work.

yAfter connection of “LG Bluetooth Remote”

app, music may be output from your device.
In this case, try connecting procedure again.

yIf you operate the other applications or

change the settings on your Bluetooth
device while using “LG Bluetooth Remote”
app, “LG Bluetooth Remote” app may
operate abnormally.

yWhen “LG Bluetooth Remote” app operate

abnormally, check your Bluetooth device
and the connection of “LG Bluetooth
Remote” app and then try to connect again.

yDepending on the smart phone's operating

system, you have some dierences for “LG
Bluetooth Remote” operation.

yIf you select Bluetooth function after

“LG Bluetooth Remote” app has been
disconnected, this unit and your Bluetooth
device will be paired automatically but you
cannot control this unit by “LG Bluetooth
Remote” app. To use “LG Bluetooth Remote”
app, reconnect the app.

yEven though Bluetooth connection will be

disconnected, you can use “LG Bluetooth
Remote” app when you change the function
to the others except LG TV function.

LAP240-NB_DDEULLK_ENG.indd 18 2014-03-06  5:45:52

Setting sound effect

This system has a number of pre-set surround
sound fields. You can select a desired sound
mode by using SOUND EFFECT. A color LED that
indicates the sound effect you select will blink
rapidly twice.

The displayed items for the equalizer may be
different depending on sound sources and effects.

Sound

eect

Standard Red

Music Green

Cinema White

,

yIn some of surround modes, some speakers,

there’s no sound or low sound. It depends
on the mode of surround and the source of
audio, it is not defective.

yYou may need to reset the surround mode,

after switching the input, sometimes even
after the sound le changed.

Note

LED

blinking

Description

You can enjoy the
sound without
equalizer eect.

You can enjoy
comfortable and
natural sound.

You can enjoy more
immersive and
cinematic surround
sound.

Operating 19

2

Operating

LAP240-NB_DDEULLK_ENG.indd 19 2014-03-06  5:45:52

3 Troubleshooting

Troubleshooting20

Troubleshooting

PROBLEM CAUSE & CORRECTION

No Power

No sound

3

Troubleshooting

The remote control

does not work

properly.

yThe power cord is unplugged.

Plug in the power cord.

yCheck the condition by operating other electronic devices.

yIncorrect input source is selected.

Check the input source and select the correct input source.

yThe mute function is activated.

Press i or adjust the volume level to cancel the mute function.

yWhen you are using connection with a external device (set top box, Bluetooth

device etc.), adjust volume level of the device.

yThe remote control is too far from the unit.

Operate the remote control within about 7 m.

yThere is an obstacle in the path of the remote control and the unit.

Remove the obstacle.

yThe battery in the remote control is exhausted.

Replace the battery with new one.

The AUTO POWER

on/o function does

not work.

LG Sound Sync does

not work.

When you feel the

output sound of the

unit is low.

There is a noise on

the periphery of the

unit.

yCheck connection of the external device such as TV, DVD/Blu-Ray player or

Bluetooth device.

yDepending on the connected device, this function may not operate.

yCheck the status of AUTO POWER ON/OFF switch on the rear panel of the unit.

yCheck whether your LG TV supports LG Sound Sync.

yCheck connection of LG Sound Sync (Optical or wireless).

yCheck sound setting of your TV and this unit.

Check the details below and adjust the unit according to them.

yWith the unit connected with TV, change the AUDIO DIGITAL OUT setting on TV

Setup Menu from [PCM] to [AUTO] or [BITSTREAM].

yWith the unit connected with Player, change the AUDIO DIGITAL OUT setting on

Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or [BITSTREAM].

yChange Audio DRC setting on Player setup menu to [OFF] state.

Depending on the type of the furniture where the unit is placed, you might hear a
slight noise from the furniture due to the dual subwoofers built within the product.

yCheck the supporting furniture whether it is suciently rm and horizontal.

yHowever, if you still hear a noise, place a tablecloth between the unit and the

surface.

LAP240-NB_DDEULLK_ENG.indd 20 2014-03-06  5:45:52

4 Appendix

Trademarks and
licenses

Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS 2.0
Channel is a trademark of DTS, Inc. © DTS, Inc. All
Rights Reserved.

Appendix 21

4

Appendix

Bluetooth® wireless technology is a system which
allows radio contact between electronic devices.

Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless
technology can be operated via the Cascade if
the connection was made via Bluetooth® wireless
technology.

The Bluetooth® word mark and logos are owned
by the Bluetooth® SIG, Inc. and any use of such
marks by LG Electronics is under license.

Other trademarks and trade names are those of
their respective owners.

LAP240-NB_DDEULLK_ENG.indd 21 2014-03-06  5:45:54

Appendix22

Specifications

General

Power requirements Refer to the main label on the unit.

Power consumption Refer to the main label on the unit.

Dimensions (W x H x D) (560 x 54.5 x 320) mm (With foot)

Net Weight (Approx.) 4.4 kg

Operating temperature 5 °C to 35 °C

Operating humidity 5 % to 90 %

Inputs

DIGITAL IN (OPTICAL IN) 3.3 V (p-p), Optical jack

Available Digital Input Audio
Sampling Frequency

32 kHz, 44.1 kHz, 48 kHz, 96 kHz

4

Appendix

Amplier

Total output 100 W

Stereo mode 20 W x 2 (at 1 kHz, 8 Ω)

Surround mode 20 W x 2 (at 1 kHz, 8 Ω)

Built-In subwoofer 20 W (at 100 Hz, 8 Ω)

THD 0.1 %

yDesigns and specications are subject to change without prior notice.

LAP240-NB_DDEULLK_ENG.indd 22 2014-03-06  5:45:54

Maintenance

Handling the unit

When shipping the unit

Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.

Keeping the exterior surfaces clean

yDo not use volatile liquids such as insecticide

spray near the unit.

yWiping with strong pressure may damage the

surface.

yDo not leave rubber or plastic products in

contact with the unit for a long period of time.

Cleaning the unit

To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.

Appendix 23

4

Appendix

LAP240-NB_DDEULLK_ENG.indd 23 2014-03-06  5:45:54

LAP240-NB_DDEULLK_ENG.indd 24 2014-03-06  5:45:54