LG SN7Y User Guide

SIMPLE MANUAL

Wireless
Sound Bar

Please read this manual carefully before operating your set and retain it for
future reference.
To view the instructions of advanced features, visit http://www.lg.com and
then download Owner’s Manual. Some of the content in this manual may
differ from your unit.

MODEL

SN7Y

www.lg.com

Copyright © 2020 LG Electronics Inc. All Rights Reserved.

2003_Rev01

MFL71672211

ENGLISH

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK) NO USER-

SERVICEABLE PARTS INSIDE REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage within the

sufcient magnitude to constitute a risk of electric shock
to persons.

the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.

WARNING: Do not install this equipment in a conned
space such as a book case or similar unit.

CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.

CAUTION: No naked ame sources, such as lighted
candles, should be placed on the apparatus.

CAUTION: Do not block any ventilation openings. Install
in accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product
and to protect it from over heating. The openings should
never be blocked by placing the product on a bed, sofa,
rug or other similar surface. This product shall not be
placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s
instruction has been adhered to.

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In case of an
emergency, the Power Plug must remain readily accessible.

CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects lled with liquids,
such as vases, should be placed on the apparatus.

NOTICE: For safety marking information including
product identication and supply ratings, please refer to
the main label on the bottom or the other surface of the
product.

product’s enclosure that may be of

The exclamation point within an
equilateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying

CAUTION: Only use the AC adapter supplied with this
device. Do not use a power supply from another device
or another manufacturer. Using any other power cable or
power supply may cause damage to the device and void
your warranty.

yThe appliance is not intended for use by young

children or inrm persons without supervision.

yYoung Children should be supervised to ensure

that they do not play with appliance.

yIf the appliance is supplied from a cord extension

set or an electrical portable outlet device, the
cord extension set on electrical portable outlet
device must be positioned so that it is not subject
to splashing (of water or any form of liquid) or
ingress of moisture.

For models using a battery

This device is equipped with a portable battery or
accumulator.

Risk of re or explosion if the battery is replaced by an
incorrect type.

RF Radiation Exposure Statement

This equipment shall be installed and used at a minimum
distance of 20 cm from the human body.

Symbols

Refers to alternating current (AC).

~

0

Refers to direct current (DC).

Refers to class II equipment.

1

Refers to stand-by.

!

Refers to “ON” (power).

Refers to dangerous voltage.

SN7Y.DAUSLLK_SIM (Sheet)_ENG_MFL71672211.indd 1-4 2020-03-26  12:47:52

Front Panel

1 (Standby) ··········Switches the unit ON or OFF.

F (Function) ························Selects function.
p/o (Volume)····················Adjusts volume.

Rear Panel

DC IN····················· Connect to the AC adapter.
OPTICAL IN ············Connect to an optical device.

USB Port ····················Connect to a USB device.

HDMI IN ··········Connect to device with HDMI OUT.
HDMI OUT (TV ARC)··············· Connect to a TV.

Subwoofer Connection

Place the wireless subwoofer near the sound bar and
follow steps below.

a Connect the power cord of the sound bar and the

wireless subwoofer to the outlet.

b Turn on the sound bar.

• The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
green LED turns on.

Manual Subwoofer Connection

If the subwoofer does not make sound, try to
connect manually.

a Press PAIRING on the rear of the wireless

subwoofer.

• The green LED on the rear of the wireless
subwoofer blinks quickly.
(If the green LED does not blink, press and
hold the PAIRING.)

b Turn on the sound bar.

• Pairing is completed. The green LED on the
rear of the wireless subwoofer turns on.

Keep the sound bar and the subwoofer
away from the device (ex. wireless router,
microwave oven, etc.) over 1 m to prevent
wireless interference.

TV Connection

Connect the sound bar and TV using Optical ( ) or

HDMI ARC ( ).

Optical Connection

a Connect the sound bar to the TV using Optical

cable.

b Set up [External Speaker (Optical)] on your TV

setting menu.

HDMI (ARC) Connection

a Connect the sound bar to the TV using HDMI

cable.

b Set up [External Speaker (HDMI ARC)] on your

TV setting menu.

• HDMI connection is unavailable if your TV
does not support HDMI ARC.

• If this unit is connected by OPTICAL and
ARC at the same time, the ARC signal
has a higher priority.

Remote control

Replacement of Battery

C/V: Skip/Search
N: Play/Pause

- Bluetooth connection lock (BT LOCK): Select
the Bluetooth function by pressing F repeatedly.
Long press N and press it again to limit
Bluetooth connection to only BT and LG TV.

SOUND EFFECT: Selects a sound effect mode.

- TV remote: Long press SOUND EFFECT and

press it again to use TV remote control.

FOLDER W/S: Searches a folder.
J: Displays the information of a le, an input source

or connected Bluetooth device name.

- Auto Power ON/OFF: Long press J and press

it again.

: Adjusts sound level of each speaker.

- Surround sound: Long press
again.

REPEAT: Listens to your les repeatedly or randomly.

and press it

Additional Information

Specication

Power
consumption

AC adapter

Dimensions
(W x H x D)

Bus Power
Supply

(USB)

Amplier
(Total RMS
Output
power)

Design and specications are subject to change
without notice.

Rear Speakers Ready

Ready for surround sound with Rear
Speakers Kit sold separately. (SPK8-S)

Refer to the main label.

• Model : DA-50F25

• Manufacturer : Asian Power
Devices Inc.

• Input : 100 - 240 V ~
50 - 60 Hz

• Output : 25 V 0 2 A

Approx.

890.0 mm x 65.0 mm x

119.0 mm With foot

5 V 0 500 mA

380 W RMS

OPEN SOURCE SOFTWARE NOTICE
INFORMATION

To obtain the source code under GPL, LGPL, MPL, and
other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.

In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices are
available for download.

LG Electronics will also provide open source code to
you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of
media, shipping, and handling) upon email request to
[e-mail].

This offer is valid for a period of three years after our
last shipment of this product. This offer is valid to
anyone in receipt of this information.

• It is recommended that you purchase
a USB gender separately for the
convenience of USB insertion and
extraction. (Recommended USB gender
type : USB 2.0 extension cable)

• Make sure to properly align and connect
the optical cable; improper alignment may
cause damage to the jack.

SN7Y.DAUSLLK_SIM (Sheet)_ENG_MFL71672211.indd 5-8 2020-03-26  12:47:54

1 m

!

a Connect to the external device like as follow.

(Set-top Box,

Player etc.)

OR

b Set the input source by pressing F repeatedly.

Additional Device Connection