LG SN5R Quick Guide

www.lg.com

Copyright © 2020 LG Electronics Inc. All Rights Reserved.1912_Rev01

MFL71672710

SIMPLE MANUAL

Wireless
Sound Bar

Please read this manual carefully before operating your set and retain it for
future reference.
To view the instructions of advanced features, visit
http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.

MODEL

SN5R

ENGLISH

SN5R.DCISLLK_SIM_ENG_MFL71672710.indd 1 2020-01-29   4:52:44

Front Panel

Subwoofer Connection

The buttons are located on the side.

1 (Standby) ··········Switches the unit ON or OFF.
F (Function) ························Selects function.
p/o (Volume)····················Adjusts volume.

Rear Panel

DC IN····················· Connect to the AC adapter.
OPTICAL IN ············Connect to an optical device.
HDMI IN ··········Connect to device with HDMI OUT.
HDMI OUT (TV ARC)··············· Connect to a TV.

USB (Service only)··········S/W download connector.

Make sure to properly align and connect
the optical cable; improper alignment may
cause damage to the jack.

Place the wireless subwoofer near the sound bar and
follow steps below.

a Connect the power cord of the sound bar and the

wireless subwoofer to the outlet.

b Turn on the sound bar.

• The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
green LED turns on.

Manual Subwoofer Connection

If the subwoofer does not make sound, try to
connect manually.

a Press PAIRING on the rear of the wireless

subwoofer.

• The green LED on the rear of the wireless
subwoofer blinks quickly.
(If the green LED does not blink, press and
hold the PAIRING.)

b Turn on the sound bar.

• Pairing is completed. The green LED on the
rear of the wireless subwoofer turns on.

Keep the sound bar and the subwoofer
away from the device (ex. wireless router,
microwave oven, etc.) over 1 m to prevent
wireless interference.

1 m

!

SN5R.DCISLLK_SIM_ENG_MFL71672710.indd 2 2020-01-29   4:52:46

TV Connection

Remote control

Connect the sound bar and TV using Optical ( ) or
HDMI ARC ( ).

Optical Connection

a Connect the sound bar to the TV using Optical

cable.

b Set up [External Speaker (Optical)] on your TV

setting menu.

TV

HDMI (ARC) Connection

a Connect the sound bar to the TV using HDMI

cable.

b Set up [External Speaker (HDMI ARC)] on your

TV setting menu.

TV

• HDMI connection is unavailable if your TV
does not support HDMI ARC.

• If this unit is connected by OPTICAL and
ARC at the same time, the ARC signal
has a higher priority.

Replacement of Battery

C/V: Skip
N: Play/Pause

- Bluetooth connection lock (BT LOCK): Select
the Bluetooth function by pressing F repeatedly.
Long press N and press it again to limit
Bluetooth connection to only BT and LG TV.

SOUND EFFECT: Selects a sound effect mode.

- TV remote: Long press SOUND EFFECT and

press it again to use TV remote control.

8: Turns on or off the Night time mode.

J:Displaystheinformationofale,aninputsource

or connected Bluetooth device name.

- Auto Power ON/OFF: Long press J and press

it again.

: Adjusts sound level of each speaker.

- Surround sound: Long press
again.

: This button is not available.

*

and press it

Additional Device Connection

a Connect to the external device like as follow.

(Set-top Box,
Player etc.)

TV

OR

OR

b Set the input source by pressing F repeatedly.

SN5R.DCISLLK_SIM_ENG_MFL71672710.indd 3 2020-01-29   4:52:48

Additional Information

Specication

Refer to the main label.

Power
consumption

AC adapter

Dimensions
(W x H x D)

Amplier
(Total RMS
Output
power)

Designandspecicationsaresubjecttochange

without notice.

Rear Surround sound

Wireless Rear Speakers Kit included for real
surround sound. (SPJ4-S)

Networked standby : 1.0 W
(If all network ports are

activated.)

• Model : DA-50F25

• Manufacturer : Asian Power

Devices Inc.

• Input : 100 - 240 V ~
50 - 60 Hz

• Output : 25 V 0 2 A

Approx.

890.0 mm X 57.0 mm X

85.0 mm With foot

520 W RMS

OPEN SOURCE SOFTWARE NOTICE
INFORMATION

To obtain the source code under GPL, LGPL, MPL, and
other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.

In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices are
available for download.

LG Electronics will also provide open source code to
you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of
media, shipping, and handling) upon email request to
[e-mail].

This offer is valid for a period of three years after our
last shipment of this product. This offer is valid to
anyone in receipt of this information.

Declaration of Conformity

Hereby, LG Electronics declares that the radio
equipment type Wireless Sound Bar is in compliance
with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following
internet address:

http://www.lg.com/global/support/cedoc/cedoc#

For consideration of the user, this device should be
installed and operated with a minimum distance of
20 cm between the device and the body.

How to disconnect the wireless network
connection or the wireless device

Set up the AUTO POWER ON/OFF function to off
and turn off the unit.

SN5R.DCISLLK_SIM_ENG_MFL71672710.indd 4 2020-01-29   4:52:48