<![endif]>AISENODNI HSILGNE
OWNER’S MANUAL
AIRCONDITIONER
Please read this manual carefully before operating your set and retain itforfuture reference.
TYPE : WALL MOUNTED
MODELS :
S10INV-2 S13INV-2
P/NO : MFL66102309 |
www.lge.com |
Air Conditioner Owner’s Manual
TABLE OF CONTENTS
A. Safety Precautions................................................ |
3 |
B. Electrical Safety...................................................... |
6 |
Temporary Use of an Adapter ......................... |
6 |
Temporary Use of an Extension Cord ........... |
6 |
Symbols used in this Manual........................... |
6 |
C. Product Introduction........................................... |
7 |
Indoor Units ........................................................... |
7 |
Operation Indication Lamps ........................... |
7 |
Outdoor Unit ......................................................... |
7 |
D. Operating Instructions ........................................ |
8 |
How to insert the Batteries .............................. |
8 |
Wireless Remote Controller |
|
Maintenance........................................................ |
8 |
Operating Method.............................................. |
8 |
Wireless Remote Controller............................. |
9 |
Operation Mode................................................. |
10 |
Auto Operation .................................................. |
11 |
Healthy Dehumidi cation Operation......... |
11 |
Auto Clean Operation....................................... |
11 |
Energy-Saving Cooling Mode .......................... |
12 |
Setting the Current Time ................................ |
12 |
PLASMA Puri cation & |
|
Ion Generation Operation............................... |
12 |
Display Luminosity............................................. |
12 |
Timer Setting ....................................................... |
13 |
Sleep Mode .......................................................... |
13 |
Vertical Vane Control........................................ |
14 |
Horizontal Vane Control.................................. |
14 |
Jet Cool Operation ............................................ |
14 |
Forced operation ............................................... |
15 |
Auto Restart Function....................................... |
15 |
E. Maintenance and Service ................................. |
16 |
Indoor Unit............................................................ |
16 |
Outdoor Unit ........................................................ |
18 |
Operation Tips!.................................................... |
18 |
Self-Diagnosis Function ................................... |
18 |
Troubleshooting Tips! Save time |
|
and money!........................................................... |
19 |
Call the service immediately in the |
|
following situations .......................................... |
19 |
FOR YOUR RECORDS
Write the model and serial numbers here:
Model #
Serial #
You can nd them on a label on the side of each unit.
Dealer's Name
Date Purchased
Staple your receipt to this page in the event you need it to prove date of purchase or for warranty issues.
READ THIS MANUAL
and maintain your air conditioner properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your air conditioner.
chart of troubleshooting tips. If you review our chart of
Troubleshooting Tips for service at all.
PRECAUTION
•Contact the authorized service technician for repair or maintenance of this unit.
•Contact the installer for installation of this unit.
•The air conditioner is not intended for use by young children or invalids without supervision.
•Young children should be supervised to ensure that they do not play with the air conditioner.
•When the power cord is to be replaced, replacement work shall be performed by authorized personnel only using only genuine replacement parts.
2 Air Conditioner
Safety Precautions
Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions must be followed. the following indications.
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage.
Meanings of symbols used in this manual are as shown below.
Be sure not to do.
Be sure to follow the instruction.
<![endif]>ENGLISH
Always use a power plug and socket with a ground terminal.
•There is a risk of electric shock.
For electrical work, contact the dealer, seller,
Service Center. Do not disassemble or repair the product by yourself.
•There is risk of re or electric shock.
Use the correctly rated breaker or fuse.
•There is risk of re or electric shock.
Do not install the product on a defective installation stand. Be sure that the installation area does not deteriorate with age.
•It may cause product to fall.
In outdoor unit the step-up capacitor supplies high voltage electricity to the electrical components. Be sure to discharge the capacitor completely before conducting the repair work.
•An charged capacitor can cause electrical shock.
Do not use a defective or underrated circuit breaker. Use the correctly rated breaker and fuse.
•There is risk of re or electric shock .
Always ground the product as per the wiring diagram. Do not connect the ground wire to gas or water pipes lightening rod or telephone ground wire.
•There is risk of re or electric shock.
Do not modify or extend the power cable. If the power cable or cord has scrathes or
must be replaced.
•There is risk of re or electric shock.
Never install the outdoor unit on a moving base or a place from where it can fall down.
•The falling outdoor unit can cause damage or injury or even death of a person.
When installing the unit, use the installation kit provided with the product.
Do not use a multi consent. Always use this appliance on a dedicated circuit breaker.
•Otherwise it can cause electric shock or re.
Install the panel and the cover of control box securely.
•There is risk of re or electric shock due to dust , water etc.
For installation, removal or reinstall , always contact the dealer or an Authorized Service Center.
•There is risk of re, electric shock, explosion, or injury.
submerged) in water , contact an Authorized Service Center for repair before using it again.
•There is risk of re or eletric shock.
Be sure to use only those parts which are listed in the svc parts list. Never attempt to modify the equipment.
• Otherwise the unit may fall and cause severe |
• The use of inappropriate parts can cause an |
injury. |
electrical shock, excessive heat generation |
|
or re. |
Owner’s Manual 3
Safety Precautions
Indoor/outdoor wiring connections must be secured tightly and the cable should be routed properly so that there is no force pulling the cable from the connection terminals.
•Improper or loose connections can cause heat generation or re.
Be sure to check the refrigerant to be used. Please read the label on the product.
•Incorrect refrigerant used can prevent the normal operation of the unit.
Do not place a heater or other heating appliances near the power cable.
•There is risk of re and electric shock.
Do not use the product in a tightly closed space for a long time. Perform ventilation regularly.
•Oxygen de ciency could occur and hence harm your health.
Ventilate the product room from time to time when operating it together with a stove, or heating element etc.
•Oxygen de ciency can occur and hence harm your health.
Take care to ensure that nobody especially kids could step on or fall onto the outdoor unit.
•This could result in personal injury and product damage.
Safely dispose o the packing materials. Like screws, nails, batteries, broken things etc after installation or svc and then tear away and throw away the plastic packaging bags.
•Children may play with them and cause injury.
Don't use a power cord, a plug or a loose socket which is damaged.
•Otherwise it may cause a re or electrical shock.
Do not allow water to run into electric parts. Install the unit away from water sources.
•There is risk of re, failure of the product, or electric shock.
Do not open the front grille of the product during operation. (Do not touch the electrostatic lter, if the unit is so equipped.)
•There is risk of physical injury, electric shock, or product failure.
Turn the main power o and unplug the unit when cleaning or repairing the product.
•There is risk of electric shock.
Take care to ensure that power cable could not be pulled out or damaged during operation.
•There is risk of re or electric shock.
Make sure to check that the power cable plug is not dirty, loose or broken and then only insert the plug completely.
•Dirty, loose or broken power plug can cause electric shock or re.
Do not touch , operate, or repair the product with wet hands. Hold the plug by hand when taking out
•There is risk of electric shock or re.
Do not store or use or even allowammable gas or combustibles near the product.
•There is risk of re.
If strange sound, smell or smoke comes from product.Immediately turn the breaker o or disconnect the power supply cable.
•There is risk of electric shock or re.
When the product is not to be used for a long time, disconnect the power supply plug or turn o the breaker.
•There is risk of product damage or failure, or unintended operation.
Do not place ANYTHING on the power cable.
•There is risk of re or electric shock.
Do not plug or unplug the power supply plug to turn the unit ON/OFF .
• There is risk of re or electric shock.
When ammable gas leaks, turn o the gas and open a window for ventilation befor turning on the product.
•Do not use the telephone or turn switches on or o . There is risk of explosion or re.
Two or more people must lift and transport the product.
•Avoid personal injury.
Keep level even when installing the product.
•To avoid vibration or noise.
Do not install the product where it will be exposed to sea wind (salt spray) directly.
•It may cause corrosion on the product.
Do not install the product where the noise or hot air from the outdoor unit could damage or disturb the neighborhoods.
•It may cause a problem for your neighbors and hence dispute.
Install the drain hose to ensure that the condensed water is drained away properly.
•A bad connection may cause water leakage.
Always check for gas (refrigerant) leakage after installation or repair of product.
•Low refrigerant levels may cause failure of product.
4 Air Conditioner
|
|
Safety Precautions |
Do not use the product for special purposes, |
|
Use a soft cloth to clean. Do not use |
such as preserving foods, works of art, etc. It |
|
harsh detergents, solvents or splashing |
is a consumer air conditioner, not a precision |
|
water etc . |
refrigeration system. |
|
|
• There is risk of damage or loss of property. |
• It may cause product failure. |
• There is risk of re, electric shock, or damage |
|
|
to the plastic parts of the product. |
Do not touch the metal parts of the |
Do not step on or put anyting on the |
|
|
product. (outdoor units) |
or more often if necessary. |
|
|
•There is risk of personal injury.
Do not insert hands or other objects through the air inlet or outlet while the product is operating.
•There are sharp and moving parts that could cause personal injury.
Do not tilt the unit when removing or uninstalling it.
•The condensed water inside can spill .
•There is risk of personal injury and failure of product.
Be cautious when unpacking and installing the product.
•Sharp edges could cause injury.
Do not mix air or gas other than the
•If air enters the refrigerant system, an excessively high pressure results, causing equipment damage or injury.
•A dirty lter reduces the e ciency.
If the refrigerant gas leaks during the repair, do not touch the leakaing refrigerant gas.
•The refrigernat gas can cause frostbite (cold burn)
If the refrigerant gas leaks during the installation, ventilate the area immediately.
•Otherwise it can be harmfull for your health.
Dismantling the unit, treatment of the refrigerant oil and eventual parts should be done in accordance with local and national standards.
If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not use the remote if the batteries have leaked.
•The chemicals in batteries could cause burns or other health hazards.
Do not expose your skin or kids or plants to the cool or hot air draft.
•This could harm to your health.
Replace the all batteries in the remote control with new ones of the same type. Do not mix old and new batteries or
•There is risk of re or product failure.
If you eat the liquid from the batteries, brush your teeth and see doctor. Do not use the remote if the batteries have leaked.
•The chemicals in batteries could cause burns or other health hazards.
Do not drink the water drained from the product.
•It is not sanitary and could cause serious health issues.
Do not recharge or disassemble the
•They may burn or explode.
Do not let the air conditioner run for a long time when the humidity is very high and a door or a window is left open.
•Moisture may condense and wet or damage furniture.
maintaining or repairing the product at an height.
•Be careful and avoid personal injury.
<![endif]>ENGLISH
Owner’s Manual 5
Electrical Safety
Electrical Safety
• This appliance must be properly grounded.
To minimize the risk of electric shock, you must always plug into a grounded oulet.
•Do not cut or remove the grounding prong from the power plug.
•Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance unless the cover screw is metal and not insulated, and the wall receptacle is grounded through the house wiring.
•If you have any doubt whether the air conditioner is properly grounded, have the wall receptacle and circuit checked by a quali ed electrician.
Temporary Use of an Adepter
We strongly discourage the use of an adapter due to potential safety hazards. For temporary connections, use only a genuine adapter, available from most local hardware stores. Ensure that the large slot in the adapter is aligned with the large slot in the receptacle for a proper polarity connection.
To disconnect the power cord from the adapter, use one hand on each to avoid damaging the ground terminal. Avoid frequently unplugging the power cord as this can lead to eventual ground terminal damage.
• Never use the appliance with a broken adapter.
Temporary Use of an Extension Cord
We strongly discourage the use of an extension cord due to potential safety hazards.
This appliance should be installed in accordance with national wiring regulations. This manual acts as a guide to explaining product features.
Symbols used in this Manual
NOTE
This symbol alerts you to the risk of electric shock.
This symbol alerts you to hazards that may cause harm to the air conditioner.
This symbol indicates special notes.
6 Air Conditioner
Product Introduction
Product Introduction
Here is a brief introduction of the indoor and outdoor units.
Indoor Unit
Air Inlet
Plasma Filter
Air Filter
ON/OFF Button
Signal Receiver
Triple Filter
|
|
LED Display |
Ionizer |
|
H1N1 Filter |
|
Air Outlet |
Horizontal Vane |
|
|
|
|
Vertical Louver |
Operation Indication Lamps
Power |
On/O |
: Lights up during the system operation. |
|
||
Timer |
Timer |
: Lights up during timer operation. |
|
Plasma+Ion Plasma+Ion : Lights up during plasma and Ion operation.
<![endif]>ENGLISH
Outdoor Unit
Air intake vents
Connecting wires
Refrigerant pipes
Air outlet vents |
|
Base plate |
Drain hose |
Owner's Manual 7
Operating Instructions
Operating Instructions
How to insert the batteriesB
1. Remove the battery cover by pulling it according to the arrow direction.
2. Insert new batteries making sure that the (+) and (-) of battery are installed correctly.
3. Reattach the cover by sliding it back into position.
NOTE
1. Always use/replace both batteries of same type.
2. If the system is not to be used for a long time, remove the batteries to save their working life.
3. If the display screen of remote controller starts, fading replace both of the batteries.
4. Use 2 AAA(1.5 volt) batteries.
WirelessHoPe awatanto inseRemoter th ConBatteriesollerNirkabelMaintenance
1. Choose a suitable place where its safe & easy to reach.
2. Fix the holder to wall etc with the supplied screws rmly.
3. Slide the remote controller inside the holder.
NOTE
1. Remote controller should never be exposed to direct sunlight.
2.Signal transmitter & receiver should always be clean for proper communication. Use a soft cloth to clean them.
3.In case some other appliances also get operated with remote control, change their position or consult your serviceman.
Operatingatt ries Method
1.The signal receiver is inside the unit.
2.Aim the remote controller towards the unit to operate it. There should not be any blockage in between.
8 Air Conditioner
Operating Instructions
Wireless Remote Controller
The controls will look like the following.
Signal transmitter
|
|
PLASMA |
|
|
|
5 |
|
|
|
1 |
|
12 |
|
|
|
|
|
|
|
|
|
3 |
|
4 |
|
|
|
|
|
2 |
|
|
CANCEL |
9 |
|
|
|
|
|||
6 |
ON |
OFF |
SET |
8 |
|
10 |
15 |
||||
|
|
AUTO CLEAN |
|||
7 |
|
|
|
16 |
|
|
|
|
|
11 |
18 |
17 |
|
13 |
||
14 |
||
|
||
|
Flip-up door |
|
|
(opened) |
Operation Mode
Cooling Operation
Auto Operation or Auto Changeover
NOTE
To use the functions printed in blue at the bottom of the buttons press 2 nd F button rst and then the required
function button. Pressing the 2 nd F button activates the blue printed function of the respective button. To cancel the function press the 2nd F button again else it will automatically cancel if remains idle after 10 seconds.
1. START/STOP BUTTON
Used to turn O /On the unit.
2.OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
3.ROOM TEMPERATURE SETTING BUTTONS
Used to select the room temperature.
4.INDOOR FAN SPEED SELECTOR BUTTON
Used to select fan speed in four steps low, medium, high and CHAOS.
5.JET COOL BUTTON
Used to start or stop the speed cooling.
(It operates fan in super high speed in cooling mode)
6. ON/OFF TIMER BUTTONS
Used to set the time of starting and stopping operation.
7.TIME SETTING BUTTONS
Used to adjust the time.
8.TIMER SET/CANCEL BUTTON
Used to set and to cancel the timer operation.
9. SLEEP MODE AUTO BUTTON
Used to set sleep mode auto operation.
10.ENERGY-SAVING COOLING MODE BUTTON
Used to set energy-saving cooling mode operation.
11.ROOM TEMPERATURE CHECKING BUTTON
Used to check the room temperature.
12.CHAOS SWING BUTTON
Used to stop or start louver movement and set the desired up/down air ow direction.
13.RESET BUTTON
Used prior to resetting time.
14.2nd F BUTTON
Used prior to using modes printed in blue at the bottom of buttons.
15.AUTO CLEAN BUTTON
Used to set auto clean mode.
In some models this button has a 2nd function of LED luminosity control.
16.LED LUMINOSITY BUTTON
Used to adjust LED luminosity.
17.HORIZONTAL AIRFLOW DIRECTION CONTROL BUTTON
Used to set the desired horizontal air ow direction.
18.PLASMA BUTTON
Used to start or stop the Plasma-Puri cation and Ion-Generation function.
<![endif]>ENGLISH
Owner’s Manual 9
Operating Instructions
Operation Mode
ON
1
3
4
2
1 |
Press the START/STOP BUTTON to |
turn the unit on. |
The unit will respond with a beep.
2 |
Open the door of the remote controller and press the |
operation mode button. Each time the button is pressed, the |
operation mode is shifted in the direction of the arrow.
Cooling |
Auto |
Healthy |
|
Operation |
|
3 |
For cooling or heating operation set the desired indoor |
temperature by pressing the ROOM TEMPERATURE |
SETTING BUTTONS.
For cooling the temperature can be set within 18 °C~30 °C
To raise the temperature
To lower the temperature
4 |
Set the fan speed with the remote controller. You can select the fan speed in four steps-low, |
medium, high and CHAOS by pressing the INDOOR FAN SPEED SELECTOR BUTTON. |
Each time the button is pressed, the fan speed mode is shifted.
CHAOS Air |
Fan speed is on low. |
Fan speed is on medium. Fan speed is on high. |
Natural wind by the CHAOS logic
For fresher feeling, press the INDOOR FAN SPEED SELECTOR BUTTON selector and set to CHAOS mode.
In this mode, the wind blows like a natural breeze by automatically changing fan speed according to the CHAOS logic.
10 Air Conditioner
Operating Instructions
Auto Operation
|
In this operation mode the actual setting temperature and the fan speed |
|
are automatically set by the electronic control logic based on the current |
|
room temperature. If you feel hot or cold press the temperature setting |
|
NOTE : You cannot set the actual setting temperature and the indoor fan |
|
|
|
speed in this operation mode. But you can use the Chaos swing |
Auto |
in this operation. |
If the system is not operating as desired, switch manually to |
|
|
another mode. |
|
To run the auto operation follow steps 1, and 2. (See operation mode) |
Healthy Dehumidi cation Operation
<![endif]>ENGLISH
Healthy
temperature.
In this case, however, the setting temperature is not displayed on the remote controller and you are not able to control the room temperature either.
During the healthy function, the
volume is
automatically set according to the optimization algorithm responding to the current room temperature status, so that the room condition is kept healthy and comfortable even in the very humid season.
1, and 2 and 4
(See operation mode)
Auto Clean Operation
operation can be removed.
1. Press the AUTO CLEAN BUTTON to activate this function.
NOTE
2.
closed.
3.This dries up any remains of moisture & cleans the unit internally.
4.If you press AUTO CLEAN BUTTON again during operation, this function is cancelled.
During auto clean function, only START/STOP BUTTON, PLASMA BUTTON and AUTO CLEAN BUTTON can be used.
Owner’s Manual 11
Operating Instructions
Energy-Saving Cooling Mode
Energy-saving cooling mode can save energy in cooling , because it can operate e ciently by setting body-adaptation time according to the change of time and temperature and adjusting automatically desired temperature.
1. Press the START/STOP BUTTON to start the unit.
2. Open the door on the remote controller. Select cooling operation.
3.Press the ENERGY-SAVING COOLING MODE BUTTON.
4.To cancel the energy-saving cooling mode, press the ENERGY-SAVING
COOLING MODEL BUTTON again and unit will operate in previous mode(Cooling or healty dehumidi cation mode).
Setting the Current Time
1. Time can be set only when you press the RESET BUTTON. Having replacing the batteries, you should press the RESET BUTTON to reset the time. Press the Start/Stop button.
2. Press 2nd F button and check if icon is on.
3. Press the TIME SETTING BUTTONS until the desired time is set.
CANCEL
4. Press the TIME SET/CANCEL BUTTON.
SET
NOTE
Check the indicator for A.M. and P.M.
PLASMA Puri cation & Ion Generation Operation
Plasma lter is a technology developed by LG to get rid of microscopic contaminants in the intake air by generating a plasma of high charge electrons. This plasma kills and destroys the contaminants completely to provide clean and hygienic air.
Plasma puri cation and Ion generation can be started by pressing the PLASMA BUTTON on the remote controller. Repressing it will deactivate the operation.
PLASMA
NOTE
This feature can be used in any operation mode and any fan speed can be used while plasma lter is functioning.
Plasma puri cation and Ion generation features can not be operating separately.
12 Air Conditioner
Operating Instructions
Display Luminosity
The unit display Luminosity can be adjusted by using the remote controller. Open the cover of the remote controller and press the LED LUMINOSITY button. Display LED will be dark. Press the button again to set bright display.
(The order of 100% 0% LUMINOSITY is repeated whenever you press the button.)
If you press any button it will return to 100% LUMINOSITY. But, except ROOM TEMPERATURE CHECKING BUTTON.
Timer Setting
1. Make sure to set current time correctly on the display of the remote controller.
2. Press 2nd F button. |
ON |
OFF |
|
|
|
3. Press the ON/OFF TIMER BUTTONS to turn timer on or o . |
|
|
4. Press the TIME SETTING BUTTONS until the desired time is set.
|
|
CANCEL |
5. To set the selected time, press the TIMER SETTING BUTTONS aiming the remote controller at the |
||
signal receptor. |
SET |
|
|
||
To cancel the timer setting |
|
|
Check if |
icon is o . |
|
Press the TIMER CANCEL BUTTON aiming the remote controller at the signal receptor. |
CANCEL |
|
(The timer lamp on the air conditioner and the display will go o .) |
SET |
|
|
|
NOTE
Select one of the following four types of operation.
<![endif]>ENGLISH
Delay o timer |
Delay on timer |
Delay o and on timer |
Delay on and o timer |
Sleep Mode
1.Press the SLEEP MODE AUTO BUTTON to set the time when you want the unit to stop automatically.
2.The timer is programmed in one-hour increments by pressing the SLEEP MODE AUTO BUTTON 1 to 7 times. The sleep mode is available for 1 to 7 times.
To alter the time period in steps of 1 hour, press the SLEEP MODE AUTO BUTTON while aiming at air conditioner.
3.Make sure the Timer LED lights up.
To cancel the sleep mode, press the SLEEP MODE AUTO BUTTON several times until the Timer LED lights o .
NOTE
The sleep mode will operate indoor fan at slow speed in cooling mode and at medium speed in heating mode for pleasant sleep.
In cooling mode or healthy dehumidi cation mode:
The setting temperature will rise automatically two times by 1°C over next consecutive 30 minutes (2 °C in 1 hour) for a comfortable sleep. Now this will be the nal setting temperature as long as sleep mode is functioning.
Owner’s Manual 13