LG RT/MT-42PZ92/H/B/R/S, RT/MT/MZ-42PZ90/H/B/R/S, RT/RZ-BA50, RT/MT/MZ-42PZ91M/91V/B/R/S, RT/MT-42PZ93M/93V/B/R/S Service Manual

...

0 (0)

PLASMA MONITOR/TUNER

SERVICE MANUAL

CAUTION

BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

CHASSIS : RF-03FA

MODEL : RT/MT/MZ-42PZ90/H/B/R/S

MODEL : RT/MT-42PZ92/H/B/R/S MODEL : RT/MT/MZ-42PZ91M/91V/B/R/S MODEL : RT/MT-42PZ93M/93V/B/R/S MODEL : RT/RZ-BA50

website:http://biz.LGservice.com

e-mail:http://www.LGEservice.com/techsup.html

Aug., 2003

Printed in KoreaP/NO : 3828VD0129S

- 2 -

CONTENTS

SAFETY PRECAUTIONS ...................................................................................3

DESCRIPTION OF CONTROLS ........................................................................ 4

SPECIFICATIONS .............................................................................................. 8

ADJUSTMENT INSTRUCTIONS ......................................................................17

BLOCK DIAGRAM.............................................................................................19

ASSEMBLY METHOD........................................................................................20

PRINTED CIRCUIT BOARD ..............................................................................25

EXPLODED VIEW..............................................................................................30

EXPLODED VIEW PARTS LIST........................................................................31

REPLACEMENT PARTS LIST...........................................................................33

SCHEMATIC DIAGRAM ........................................................................................

- 3 -

SAFETY PRECAUTIONS

Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Replacement Parts List. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer.

General Guidance

An isolation Transformer should always be used during the servicing of a receiver whose chassis is not isolated from the AC power line. Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injury from electrical shocks.

It will also protect the receiver and it's components from being damaged by accidental shorts of the circuitry that may be inadvertently introduced during the service operation.

If any fuse (or Fusible Resistor) in this monitor is blown, replace it with the specified.

When replacing a high wattage resistor (Oxide Metal Film Resistor, over 1W), keep the resistor 10mm away from PCB.

Keep wires away from high voltage or high temperature parts.

Due to high vacuum and large surface area of picture tube, extreme care should be used in handling the Picture Tube. Do not lift the Picture tube by it's Neck.

Leakage Current Cold Check(Antenna Cold Check)

With the instrument AC plug removed from AC source, connect an electrical jumper across the two AC plug prongs. Place the AC switch in the on position, connect one lead of ohm-meter to the AC plug prongs tied together and touch other ohm-meter lead in turn to each exposed metallic parts such as antenna terminals, phone jacks, etc. If the exposed metallic part has a return path to the chassis, the measured resistance should be between 1MΩ and 5.2MΩ. When the exposed metal has no return path to the chassis the reading must be infinite. An other abnormality exists that must be corrected before the receiver is returned to the customer.

Leakage Current Hot Check (See below Figure)

Plug the AC cord directly into the AC outlet.

Do not use a line Isolation Transformer during this check.

Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitor between a known good earth ground (Water Pipe, Conduit, etc.) and the exposed metallic parts. Measure the AC voltage across the resistor using AC voltmeter with 1000 ohms/volt or more sensitivity. Reverse plug the AC cord into the AC outlet and repeat AC voltage measurements for each exposed metallic part. Any voltage measured must not exceed 0.75 volt RMS which is corresponds to 0.5mA. In case any measurement is out of the limits specified, there is possibility of shock hazard and the set must be checked and repaired before it is returned to the customer.

Leakage Current Hot Check circuit

1.5 Kohm/10W

To Instrument's exposed METALLIC PARTS

Good Earth Ground such as WATER PIPE, CONDUIT etc.

AC Volt-meter

IMPORTANT SAFETY NOTICE

0.15uF

- 4 -

DESCRIPTION OF CONTROLS

Connection to PC

Note: The connection cables shown above to the right are not included with the Monitor.

A D-sub 15-pin cable and a DVI cable are provided to connect the Monitor to a PC.

Connection to AV equipment

( )( )

REMOTE CONTROL

RS-232C INPUT

(CONTROL/SERVICE)

EXTERNAL SPEAKER

YPBP

(MONO)

AUDIO

S-VIDEO AC INPUTAUDIO INPUT

AUDIO INPUT

COMPONENT INPUT

AUDIO INPUT RGB OUTPUTRGB INPUTDVI INPUT

VIDEO INPUT

EXPANDED

INPUT

VOL.MENU

INPUT

SELECT

ON/OFF

Main Power Button

INPUT SELECT Button

VOLUME (F,G) Buttons

Power Standby Indicator

Illuminates red in standby mode,

Illuminates green when the

Monitor is turned on

Remote Control Sensor

MENU Button

D,E

Buttons

AUDIO

INPUT

VIDEO INPUT

S-VIDEO INPUT

AUDIO

INPUT

RS-232C INPUT

DVI INPUT

RGB INPUT

RGB OUTPUT

EXPANDED INPUT

AUDIO INPUT

COMPO-

NENT INPUT

- Shown is a simplified representation of the Monitor.

- Here shown may be somewhat different from your set.

- 5 -

(MONO)

AUDIO

VIDEO

AV(EXPANDED) INPUT

AUDIO

VIDEO

AV OUTPUT

EXPANDED OUTPUT

REMOTE CONTROL

ANT INDC IN

(DC 12V)

+75 Ω

AV1(EXPANDED)

EXPANDED OUTPUT

ANT INDC IN

(DC 12V)

+75 Ω

REMOTE CONTROL

AV2(EXPANDED)

( )

RS-232C INPUT

(CONTROL/SERVICE)

EXPANDED

INPUT

EXTERNAL SPEAKER

AC INPUT

AUDIO INPUT RGB OUTPUTRGB INPUTDVI INPUT

( )( )

REMOTE CONTROL

RS-232C INPUT

(CONTROL/SERVICE)

EXPANDED

INPUT

EXTERNAL SPEAKER

Y PBP

(MONO)

AUDIO

S-VIDEO AC INPUTAUDIO INPUT

AUDIO INPUT

COMPONENT INPUT

AUDIO INPUT RGB OUTPUTRGB INPUTDVI INPUT

VIDEO INPUT

RCA Type

Scart Type

ANTENA INPUT

AV(EXPAND

ED) INPUT

RT-BA50

RZ-BA50

AV1/2 (EXPAND-

ED) INPUT

EXTERNAL SPEAKER (8 ohm output)

RS-232C INPUT (CONTROL/SE RVICE) PORT

EXPANDED INPUT POWER CORD

SOCKET

DVI INPUT/RGB INPUT/AUDIO INPUT / RGB OUTPUT

AUDIO INPUT/COMPONENT INPUT / REMOTE CONTROL / S-VIDEO/VIDEO INPUT/AUDIO INPUT

EURO SCART SOCKET

DC IN (DC 12V)

AV OUT-

PUT

REMOTE CONTROL

EXPANDED OUTPUT

- 6 -

- Connect the Plasma Display with various external equipments after connecting the Monitor with the PDP Tuner and the Speakers.

1. Connect the RF out socket of the VCR to the aerial socket on the back of the monitor.

2. Connect the aerial cable to the RF aerial in socket of the VCR.

3. Store the VCR channel on the programme number 0 using the ‘Manual programme tuning’ section.

4. Select the programme number where the VCR channel is stored.

5. Press the PLAY button on the VCR.

Antenna Connection

1. Turn the monitor off and disconnect the mains plug.

2. Carefully place the Monitor screen side down on a cushioned surface that will protect the monitor screen from damage.

3. Mount the PDP Tuner gently into the correct position. Make sure it is inserted correctly.

4. Tighten the screws.

5. Connent the EXPANDED OUTPUT socket the on the PDP Tuner to the EXPANDED INPUT socket on the Monitor.

6. Turn the monitor on.

Installing PDP Tuner on the Monitor

- This function works only when the PDP Tuner is installed on the LG plasma display monitor.

Monitor Out Setup

The PDP Tuner has a special signal output capability which allows you to hook up a second TV or monitor. Just connect the second TV or monitor to the AV OUTPUT socket on the PDP Tuner. See the Operating Manual

of the second TV or monitor for further details regarding that device’s input settings.

S-VIDEO

OUT

(R) AUDIO (L) VIDEO

ANT OUT

ANT IN

AV1(EXPANDED)

EXPANDED OUTPUT

ANT INDC IN

(DC 12V)

+75 Ω

REMOTE CONTROL

AV2(EXPANDED)

< Back panel of the PDP Tuner >or

(MONO)

AUDIO

VIDEO

AV(EXPANDED) INPUT

AUDIO

VIDEO

AV OUTPUT

EXPANDED OUTPUT

REMOTE CONTROL

ANT INDC IN

(DC 12V)

+75 Ω

S-VIDEO

OUT

(R) AUDIO (L) VIDEO

ANT OUT

ANT IN

< Back panel of the PDP Tuner >

VCR

(MONO)

AUDIO

VIDEO

AV(EXPANDED) INPUT

AUDIO

VIDEO

AV OUTPUT

EXPANDED OUTPUT

REMOTE CONTROL

ANT INDC IN

(DC 12V)

+75 Ω

< Back panel of the PDP Tuner >

RZ-BA50

Input Mode

Main

Picture

Sub

Picture

Monitor OUT

(AV2(EXP.))

Normal

PIP/DW

TV, AV, AV1(EXP.)

or S-Video

Main Picture

RGB, DVI or

Component

TV or AV1(EXP.)

Main

Picture

TV, AV,

AV1(EXP.) or

S-Video

Sub Picture

Main Picture

RT-BA50

Input Mode

Main

Picture

Sub

Picture

Monitor OUT

(AV(EXP.))

Normal

PIP/DW

TV, AV(EXP.), AV or S-

Video

Main Picture

RGB, DVI or

Component

TV, AV(EXP.)

Main

Picture

TV, AV(EXP.), AV or S-Video

Sub Picture

Main Picture

- 7 -

Watching Cable TV

- After subscribing for a local cable TV station and installing a converter you can watch cable TV.

- For further information of cable TV, contact the local cable TV station.

Watching VCR

- When connecting the Monitor to external equipment, match the colours of connecting ports (Video - yellow, Audio (L) - white, Audio (R) -red).

- Connect the VIDEO INPUT socket (yellow) with the BNC-RCA adaptor to the VIDEO INPUT on the Monitor.

- If you have a mono VCR, connect the audio cable from the VCR to the AUDIO (L/MONO) input on the Monitor.

- If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input. Or, connect the Euro scart socket of the VCR to the Euro scart socket of the monitor.

- Use the orbiter function to Avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR. If a 4:3 picture format is used; the fixed image may remain visible on the screen.

- To avoid picture noise (interference), leave an adequate distance between the VCR and Monitor.

Watching TV programmes

- Turn the Plasma Display on and select the programme you

want.

Watching VCR

1. Use the INPUT SELECT button on the remote control to select

AV(AV1

AV2

) or

AV(EXP.)(AV1(EXP.)

AV2(EXP.)

- If both S-VIDEO and VIDEO sockets have been connected to

the S-VHS VCR simultaneously, only the S-VIDEO can be received.

- If connected to S-VIDEO, select the

S-Video

external input

source.

2. Insert a video tape into the VCR and press the PLAY button on

the VCR. (See VCR owner’s manual)

In using connection 1

1. Select programme number in programme switch of

cable box.

2. Match the Plasma Display programme with selected programme of cable box.

3. Select your desired programme with the remote control for cable box.

In using connection 2

1. Use the INPUT SELECT button on the remote con-

trol and select

AV(AV1

AV2

) or

AV(EXP.)

(

AV1(EXP.)

AV2(EXP.)

2. Tune to cable service provided channels using the cable box.

(MONO)

AUDIO

VIDEO

AV(EXPANDED) INPUT

AUDIO

VIDEO

AV OUTPUT

EXPANDED OUTPUT

REMOTE CONTROL

ANT INDC IN

(DC 12V)

+75 Ω

S-VIDEO

OUT

(R) AUDIO (L) VIDEO

(MONO)

AUDIO

VIDEO

AV(EXPANDED) INPUT

AUDIO

VIDEO

AV OUTPUT

EXPANDED OUTPUT

REMOTE CONTROL

ANT INDC IN

(DC 12V)

+75 Ω

Cable

(R) AUDIO (L) VIDEO

VCR

Cable

(R) AUDIO (L) VIDEO

VCR

< VCR >

< Back panel of the PDP Tuner >

For cable TV

< Cable Box >

- 8 -

Watching external AV source

- When connecting the monitor to an external source, match the colours of AUDIO/VIDEO input jacks on the monitor with the output jacks on the audio/video equipment: Video = yellow, Audio (Left) = white, Audio (Right) = red. Or, connect the Euro scart socket of the VCR to the Euro scart socket of the monitor.

How to use

1. Use the INPUT SELECT button on the remote control to select

(

AV1

AV2

) or

AV(EXP.)(AV1(EXP.)

AV2(EXP.)

2. Operate the corresponding external equipment. See external equip-

ment operating guide.

Watching DVD

Watching DTV

(option)

- To watch digitally broadcast programs, purchase and connect a dig ital set-top box.

How to connect

Connect DVD video inputs to Y, P

B, PR of COMPONENT INPUT

and audio inputs to Audio sockets of AUDIO INPUT. Or, connect the Euro scart socket of the VCR to the Euro scart socket of the set.

How to use

1. Turn on the DVD player, and insert a DVD.

2. Use INPUT SELECT button on the remote control to select

Component

or (

AV1

AV2

) or (

AV1(EXP.)

AV2(EXP.)

Refer to the DVD player's manual for operating instructions.

How to connect

1. Use the monitor’s COMPONENT (Y, PB, PR) INPUT, RGB or DVI

jack for video connections, depending on your set-top box connector. Then, make the corresponding audio connections.

How to use

1. Turn on the digital set-top box. (Refer to the owner’s manual for

the digital set-top box.)

2. Use INPUT SELECT on the remote control to select

Component

RGB

DVI

• Component Input ports You can get better picture quality if you connect DVD player with component input ports as below.

Component ports of the

Monitor

Video output ports of DVD player

Y Y Y Y

B-Y

Cb PB

R-Y

Cr P

< Back panel of a DVD player >

< Back panel of the PDP Tuner >

< Back of the external equipment >

Camcorder

Video game set

< Back panel of the PDP Tuner >

< Back panel of the Monitor >

(MONO)

AUDIO

VIDEO

AV(EXPANDED) INPUT

AUDIO

VIDEO

AV OUTPUT

EXPANDED OUTPUT

REMOTE CONTROL

ANT INDC IN

(DC 12V)

+75 Ω

(R) AUDIO (L) Y P

B R

P(R) AUDIO (L)

DTV OUTPUT

REMOTE CONTROL

EXPANDED

INPUT

Y PBP

(MO

AUDIO

S-VIDEO AUDIO INPUT

AUDIO INPUT

COMPONENT INPUT

AUDIO INPUT RGB OUTPUTRGB INPUTVI INPUT

VIDEO INPUT

< Digital Set-top box >

< Back panel of the PDP Tuner >

< Back panel of the Monitor >

• DTV Input signal

576p(50Hz) 1080i(50Hz) 1152i(50Hz)

Mode

Terminal

Component

o o o

RGB (DTV)

o o o

ANT INDC IN

(DC 12V)

AV(EXPANDED) INPUT

+75 Ω

AUDIO

AV OUTPUT

(MONO)

VIDEO

AUDIO

AUDIO VIDEO

R L

VIDEO

REMOTE CONTROL

EXPANDED OUTPUT

(DC 12V)

EXPANDED

RGB OUTPUT

INPUT

ANT INDC IN

AV(EXPANDED) INPUT

+75 Ω

(MONO)

AUDIO

VIDEO

Y PBP

AUDIO

AUDIO INPUT

COMPONENT INPUT

(R) AUDIO (L) (R) AUDIO (L)

AV OUTPUT

AUDIO

VIDEO

REMOTE

CONTROL

REMOTE CONTROL

S-VIDEO AC INPUTAUDIO INPUT

EXPANDED OUTPUT

VIDEO INPUT

(MONO)

AUDIO

S-VIDEO

- 9 -

Connecting PC

- To enjoy vivid picture and sound, connect a PC to the Monitor.

- Avoid keeping a fixed image on the monitor’s screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible.

- Connect PC to the RGB INPUT(PC INPUT) or DVI INPUT(DIGITAL RGB INPUT) port of the Monitor; change the resolution output of PC accordingly.

- There might be a noise according to some resolution, vertical pattern, contrast or brightness in PC mode. Then change the PC mode into other resolution or change the refresh rate into other rate or adjust the brightness and contrast on the menu until the picture is clean. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult it to the manufacturer of the PC graphic card.

- The synchronization input form for Horizontal and Vertical frequencies is separate.

Setup Instructions to Connect a PC to your Monitor

- We recommend using 640x480, 60Hz for the PC mode, they provide the best picture quality. In RT/RZ-50PZ44/45/46/47/90/91/92/93 series, we recommend using 1024x768, 60Hz for the PC mode, they provide the best picture quality.

- If the resolution of PC is over UXGA, there will be no picture on the Monitor.

- Connect the signal cable from the monitor output port of the PC to the RGB INPUT(PC INPUT) port of the Monitor or the signal cable from the DVI output port of the PC to the DVI INPUT(DIGITALRGB INPUT) port on the Monitor.

- Connect the audio cable from the PC to the Audio input on the Monitor. (Audio cables are not included with the Monitor).

- If using a sound card, adjust PC sound as required.

- This monitor apply a VESA Plug and Play Solution. The monitor provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically to use this monitor.

- DDC protocol is preset for RGB (Analog RGB), DVI (DVI, Digital RGB) mode.

- If required, adjust the monitor settings for Plug and Play functionally.

- If graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of both RGB INPUT (PC INPUT) or DVI INPUT (DIGITAL RGB INPUT) to display the PC on the monitor. If graphic card on the PC does output analog and digital RGB simultaneously, set the monitor to either RGB or DVI; (the other mode is set to Plug and Play automatically by the monitor.)

- DOS mode may not work depending on video card if using a DVI-I cable.

- To see a normal picture, match the VGAmode and DVI signal (640x480, 848x480, 852x480, 1360x768 or 1366x768).

(MONO)

AUDIO

VIDEO

AV(EXPANDED) INPUT

AUDIO

VIDEO

AV OUTPUT

EXPANDED OUTPUT

REMOTE CONTROL

ANT INDC IN

(DC 12V)

+75 Ω

( )( )

RS-232C INPUT

(CONTROL/SERVICE)

EXPANDED

INPUT

EXTERNAL SPEAKER

AUDIO INPUT RGB OUTPUTRGB INPUTDVI INPUT

< Back panel of the PDP Tuner >

< Back panel of the Monitor >

PC Setup

1. Turn on the PC and apply power to the Monitor.

2. Turn on the display by pressing the POWER button on the Monitor’s remote control.

3. Use the INPUT SELECT button on the remote control to select the

RGB

DVI

input source.

4. Set the resolution output of the PC to SXGAor under (1280 x 1024, 60Hz).

- 10 -

- When using the remote control aim it at the remote control sensor of the Monitor.

- There's maybe a defect in consecutive operation of remote control in specified brightness according to this monitor feature.

• Open the battery compartment cover on the back side and insert the batteries with correct polarity.

• Install two 1.5V alkaline batteries of AAA type. Don’t mix used batteries with new batteries.

Installing Batteries

1 2 3

4 5 6

7 8

0PSM SSM

SIZE

REVEAL

UPDATE

MIX

HOLD

INDEX MODE

TIME

POWER

MULTIMEDIA INPUT SELECT

ARC I/II/

PIP/DW

TEXT/

PR-/

PR+/

SWAP

MENU PRPRMUTE

VOL

WIN.POSITION

SPLIT ZOOM

ZOOM-

WIN.SIZE

ZOOM+

SLEEP

LIST

STOP

PLAY

REC

REW

P/STILL

VOL

PIP INPUT

POWER

Switches the Monitor on from stand-

by or off to standby.

MULTIMEDIA

ARC

Changes the picture format.

PIP/DW

Switches the sub picture on or off

PR + /*or PR - /

Selects a program for the sub picture.

SWAP

Alternates between main and sub pic-

ture.

PIP INPUT

Selects the input mode for the sub

picture.

WIN.SIZE

Adjusts the sub picture size.

WIN.POSITION

Moves the sub picture to

DD/ EE

or FF/

direction.

SWAP

Returns to the previously viewed

programme.

NUMBER buttons

Displays on screen menus one by one.

Exits the current menu.

Memorizes menu changes.

SPLIT ZOOM

Enlarge the screen with regular

ration.

VCR BUTTONS

Controls a LG video cassette recorder.

DD/ EE

Selects a menu option.

FF/ GG

(Volume button)

Increases/decreases sound level. Adjusts menu settings.

INPUT SELECT

I/II/

Selects the language during dual language broadcast. Selects the sound output.

TEXT/

These buttons are used for teletext.

SSM

To select the sound appropriate to your viewing program character :

Flat,Speech,Movie,Music

, or

User

LIST

Displays the program table.

SLEEP

Sets the sleep timer.

ZOOM+ / ZOOM-

Enlarges or reduces the main picture size.

MUTE

Switches the sound on or off.

PSM

Adjusts the factory preset picture

according to the room.

- 11 -

D-sub 15 pin cable

AS mark

LG TV

Owner’s Manual

1.5V

Alkaline batteries

BNC-RCA adaptor

(optional)

Power Cord

1 2 3

4 5 6

7 8

0PSM SSM

SIZE

REVEAL

UPDATE

MIX

HOLD

INDEX MODE

TIME

POWER

MULTIMEDIA INPUT SELECT

ARC I/II/

PIP/DW

TEXT/

PR-/

PR+/

SWAP

MENU PRPRMUTE

VOL

WIN.POSITION

SPLIT ZOOM

ZOOM-

WIN.SIZE

ZOOM+

SLEEP

LIST

STOP

PLAY

REC

REW

P/STILL

VOL

PIP INPUT

Remote Control handset

DVI-D Cable

Accessories

- Optional extras can be changed or modified for quality improvement without any notification new optional extras can be added.

- Contract your dealer for buying these items.

Optional Extras

Phone scart cable (Optional)

Tilt wall mounting bracket

Video cables Audio cables

Desktop stand

Wall mounting bracket Ceiling mounting bracket

Speakers

Desktop Speaker stand

Vertical Wall mounting bracket

- 12 -

SPECIFICATIONS

NOTE : Specifications and others are subject to change without notice for improvement

V Scope

This specification can be applied to all model of 42”PDP MONITOR related to RF-03FA Chassis.

V Test Condition

1) Temperature : 25¡ 5°C

2) Relative Humidity: 65¡ 10%

3) Power Voltage:Standard Input Voltage (AC 110V-240V~, 50/60Hz) But Standard input voltage mark value is marked by model.

4) Follow each drawing or spec for spec and performance of parts,based upon P/N of RPL

Warm up set for more than 20min before the

measurement.

V Test and Inspection Method

1) Performance:Follow the Standard of LG TV test

2) Extra standards Safety: Follow the standard of CE, IEC EMC : Follow the standard of CE, IEC

Remark Safety: IEC60065,IEC60095 EMI : EN55013

-Conducted / Radiation EMI : EN55013 (Antenna Terminal Voltage) EMS : EN55024 Safety : IEC60065,IEC60095 EMI : EN55013

-Conducted / Radiation

EMI : EN55013 (Antenna Terminal Voltage)

Model Name

MZ-42PZ44

MZ-42PZ45V

RZ-BA50

MT-42PZ44

MT-42PZ45V

MT-42PZ46

RT-BA50

Market

N-EU

Chassis

RF-03FA

(Monitor)

RF-03FA

(PDP Tuner)

AV BOARD

Brand

LG LG LG LG

Model Name MZ-42PZ44/45V MZ-42PZ90/91V

MT-42PZ44/45V/46/47V MT-42PZ90/91V/92/93V

RZ-BA50

RT-BA50 AP-42EA42 AP-42EA43

Market Place

N-EU

EU, Scart Type AV BOARD

N-EU, RCA Type AV BOARD

EU VGA, SVGA, XGA, SXGA 60Hz Digital RGB Input PAL, SECAM, NTSC PAL, SECAM, NTSC 480i, 480p, 576i, 576p L/R 2 group Discrete IR

V General Specification

1 2 3 4 5

42inch wide Colour Desplay Module 16 : 9 PDP42V5####, Fish Bone 45% Total light ransmittance

1) Temp. : 0 ~ 40

°C

2)Humidity : below 85%

1) Temp. : -20 ~ 60

°C

2)Humidity : below 85% 110 ~240V~, 50/60Hz

No Item Specification Remark

Display Screen Device

Aspect Ratio PDP Module Screen Filter

Operating Environment

Storage Environment

Input Voltage

PDP

LGE Maker : NBK (E-Mesh) LGE Mark SPEC

MZ-42PZ44/45

MURADA SONY SANKEN

- 13 -

V Model Specification

(1) MZ-42PZ4x (MZ-42PZ44/45)

Item

Specification

Remark

(2) RZ-BA50

EU DC 12V PAL B/ G/ I/ D/ K, SECAM L/ L” Upper Heterodyne PAL, SECAM

Item

Specification

Remark

Market

Input Voltage

Broadcasting system

Receiving system

Scart Jack

16 17 18 19 20

9 10 11 12 13 14 15

Market

RGB Input

DVI Input

Video Input System

S-Video Input

Component Input

Audio Input

Wired Control

- 14 -

(3) MT-42PZ4x (MT-42PZ44/45V/46)

N-EU VGA, SVGA, XGA, SXGA 60Hz Digital RGB Input PAL, SECAM, NTSC PAL, SECAM, NTSC 480i, 480p, 576i, 576p, 1080i, 1152i L/R 2 group Discrete IR

Item

Specification

Remark

Market

RGB Input

DVI Input

Video Input System

S-Video Input

Component Input

Audio Input

Wired Control

21 22 23 24 25 26 27 28

(2) RT-BA50

N-EU 12V PAL B/ G/ I/ D/ K, NTSC Upper Heterodyne PAL, SECAM, NTSC

Item

Specification

Remark

Market

Input Voltage

Broadcasting system

Receiving system

Video In/ Out System

29 30 31 32 33

1 2

Remote controller code Remote control

Local Key

Set up method

RGB input

- D - Sub 15 pin

NEC Code

1) Wireless Remote Control

2) Wired Remote Control

-RCA AV B’D

-Tuner Box

Menu, Input select

V, VOLF, VOLG

UpD/ DownE, Power (Main Power) Wall Mount/ Desk top Pivot (Optional)

RGB PC Input

- VGA ~ 85Hz

- SVGA ~ 85Hz

- XGA ~ 75Hz

- SXGA ~ 60Hz RGB - DTV Input

-480p/ 60Hz

-576p/ 50Hz

-1080i/ 50Hz

-1152i/ 50Hz DVI - D (Digital RGB)

Pivot model

MT-42PZ4x

Featur

(MNT)

V Feature and Function

Item

Specification

Remark

- 15 -

RGB out

- D - Sub 15pin Audio input

- Phone Jack RS-232C

- D - Sub pin External Speak output Expanded Control Component input (Y/ P

/ P

Y/Cb/Cr)

Video Input(CVBS) Audio Input

IR Jack ANT In (RF)

- Tuner AV In/ Out

-Scart Jack IR Jack DC Jack Expanded Control ANT In (RF) AV In/ Out (CVBS)

-RCA Jack IR Jack DC Jack Expanded Control Scar Jack

S- Video Input Audio Input

1 1 1

1 2

1 1

1 1 1 1 2

1 1 1 2

1 1

RGBHV

L/ R For RGB Input

115200bps

L/ R Tuner Box Control 480i/ 480p/ 576i/ 576p 480i/ 480p/ 576i/ 480i/ 480p/ 576i/ 576p/ 1080i/ 1152i PAL, SECAM, NTSC L/ R For Video/ S- Video L/ R For Component Discrete IR PAL- BG/ DK/ I, SECAM-L/L’ Scart 1 (TV Out) Scart 2 (MNT Out) Wired Remote Control DC 12V In 36Pin PAL-BG/ DK/ I, NTSC PAL, SECAM, NTSC Input AV Output Wired Remote Control DC 12V In 36Pin Vin, FB, RGB in, L/R in

TV out non-opposition

2) Auto AV non-function Vin, Lin, R in, V out, L out, R out

1) MNT out of Tuner Box non-opposition

2) Auto AV non-opposition

PAL, SECAM, NTSC L/R For S-Video

SPK Output 36Pin MZ-42PZ4x MT-42PZ4x Australia

RZ-BA50

- Follow Scart In/ Out Spec

- Auto AV (Scart 2 priority)

RT-BA50

Feature

(MNT)

RCA

Type

AVB’D

Scart

Type Tuner model

RCA

Type Tuner model

Scart

Type

AV B’D

Item

Specification

Remark

- 16 -

Picture Status Mode

Color Status Mode

Color Temperature

User

Sound Status Mode

AVL(Auto Volume limit) User Clock Off Time

On Time

Auto Sleep

Language (For OSD)

Child Lock

- Local key Lock ISM Method

SET ID (RS- 232C control ID) Low Power

PSM GDynamic, Standard, Mild, User CSM GNormal (9,500

°K)

G Cool (12,000

°K)

G Warm (8,500

°K)

G User (RGB Control) G R, G, B

G Contrast, Brightness, Colour,

Sharpness G Tint SSM G Flat, Speech, Movie, Music, User On Off G Treble, Bass, Balance User Setting Off On : User Setting (Time) Off On : User Setting (Time/ Volume) Off On EU 5 languages G English, French, German, Spanish, Italian

3 languages

G English, Chinese, Russian On Off

G Normal : ISM action On

G Orbiter : 2 min/ 2pixel a cycle

G Inversion : 30 min cycle On/ Off

G White Wash : Any key Off

1 ~ 99

On : 30%

Off

4 - Mode

- Default : Standard 4 - Mode

- Default : Normal

Each +/- 10 Step

- Default : 0 Default Enable For NTSC 5 - Mode

- Default : Flat

- Default : OFF

Default : 12:00 Default : 12:00

Default : 12:00/ Vol. 30

Default : Off

Default : English

- etc. PR standard

Austailia/ China/ russia

Default : Off

--> Module Spec

Default : 1

Default : Off

(picture)

(Sound)

(Time)

(special)

Item

Specification

Remark

+ 37 hidden pages