INSTALLATION MANUAL
AIR CONDITIONER
Please read this installation manual completely before installing the product.
The appliance shall be installed in accordance with national wiring regulations.
Please retain this installation manual for future reference after reading it thoroughly.
Simple Dry Contact
Original instruction
LG Electronics Inc.
EU Representative : LG Electronics European Shared Service Center B.V. Krijgsman 1, 1186 DM Amstelveen, The Netherlands
Manufacturer: LG Electronics Inc. Changwon 2nd factory, 84, Wanam-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, KOREA
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
www.lg.com |
|
MFL70585301 |
|
|
|
|
|
|
Copyright © 2018 LG Electronics Inc. All Rights Reserved. |
|||||||||||||
Rev.00_092718 |
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>ЯЗЫК РУССКИЙ |
<![if ! IE]> <![endif]>MALTI |
<![if ! IE]> <![endif]>PORTUGUÊS |
<![if ! IE]> <![endif]>ENGLISH |
<![if ! IE]> <![endif]> |
<![if ! IE]> <![endif]>SLOVENČINA |
<![if ! IE]> <![endif]>MAGYAR |
<![if ! IE]> <![endif]>ITALIANO |
|
<![if ! IE]> <![endif]>SLOVENŠČINA |
<![if ! IE]> <![endif]>БЪЛГАРСКИ |
<![if ! IE]> <![endif]>ESPAÑOL |
|
<![if ! IE]> <![endif]>VALODA LATVIEŠU |
<![if ! IE]> <![endif]>SRPSKI |
<![if ! IE]> <![endif]>FRANÇAIS |
|
<![if ! IE]> <![endif]>KALBA LIETUVIŲ |
<![if ! IE]> <![endif]>HRVATSKI |
<![if ! IE]> <![endif]>DEUTSCH |
|
<![if ! IE]> <![endif]>GAEILGE |
<![if ! IE]> <![endif]>SVENSKA |
<![if ! IE]> <![endif]>ΕΛΛΗΝΙΚΆ |
|
<![if ! IE]> <![endif]>МАКЕДОНСКИ |
<![if ! IE]> <![endif]>NORSK |
<![if ! IE]> <![endif]>ČEŠTINA |
|
<![if ! IE]> <![endif]>SHQIP |
<![if ! IE]> <![endif]>SUOMI |
<![if ! IE]> <![endif]>NEDERLANDS |
|
<![if ! IE]> <![endif]>ÍSLENSKA |
<![if ! IE]> <![endif]>DANSK |
<![if ! IE]> <![endif]>POLSKI |
|
<![if ! IE]> <![endif]>BOSANSKI |
<![if ! IE]> <![endif]>KEEL EESTI |
<![if ! IE]> <![endif]>ROMÂNĂ LIMBA |
MFL70585301-crop.pdf 1 |
2018. 12. 10. 1:20 |
TABLE OF CONTENTS
3 IMPORTANT SAFETY INSTRUCTIONS
8OVERVIEW
10 PART DESCRIPTION
10 PDRYCB000 (PCB + Case)
10Accessory
11Installation
13 INSTALLATION GUIDE
13Step 1
14Step 2
15ADMINISTRATOR GUIDE
2 Dry Contact
Important Safety Instructions
|
Important Safety Instructions |
<![if ! IE]> <![endif]>ENGLISH |
|
READ ALL INSTRUCTIONS BEFORE USING |
|||
|
|||
THE APPLIANCE. |
|
Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.
! WARNING
It can result in serious injury or death when the directions are ignored.
! CAUTION
It can result in minor injury or product damage when the directions are ignored.
!WARNING
•Installation or repairs made by unqualified persons can result in hazards to you and others.
•Installation work must be performed in accordance with the National Electric Code by qualified and authorized personnel only.
•The information contained in the manual is intended for use by a qualified service technician familiar with safety procedures and equipped with the proper tools and test instruments.
Installation Manual 3
MFL70585301-crop.pdf 2 |
2018. 12. 10. 1:20 |
Important Safety Instructions
•Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.
Installation
•Be sure to request to the service center or installation specialty store when installing products. It will cause fire or electric shock or explosion or injury.
•Request to the service center or installation specialty store when reinstalling the installed product. It will cause fire or electric shock or explosion or injury.
•Do not disassemble, fix, and modify products randomly. It will cause fire or electric shock.
•Be sure to turn off power before installation. It will cause electric shock.
•Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
•Always perform grounding. Otherwise, it may cause electrical shock.
•You need to use a safely insulated power supply which follows IEC61558-2-6 anc NEC Class2. If you do not follow, It may cause
4 Dry Contact
Important Safety Instructions
fire, electric shock, explosion or injury.
•Securely attach the electrical part cover to Module. If the electric part cover of Module is not attached securely, it could result in a fire or electric shock due to dust, water, etc.
•Make the connections securely so that the outside force of the cable may not be applied to the terminals. Inadequate connection and fastening may generate heat and cause a fire.
In-use
•Do not place flammable stuffs close to the product. It will cause fire.
•Do not allow water to run into the product. It will cause electric shock or breakdown.
•Do not give the shock to the product. It will cause breakdown when giving the shock to the product.
•Request to the service center or installation specialty store when the product becomes wet. It will cause fire or electric shock.
•Do not give the shock using sharp and pointed objects. It will cause breakdown by damaging parts.
•Do not touch the board when the power is connected. It can cause a fire, electric
Installation Manual 5
<![endif]>ENGLISH
MFL70585301-crop.pdf 3 |
2018. 12. 10. 1:20 |