LG LDP-7000 BTU User Manual

To prevent the unexpected danger or damage, please read
this information before installing and repairing the phone.
There are "Caution" and "Warning", it means as follows;

● After reading the manual, please keep it ready for the next

user.

● This means reader be careful. In this situation, you

might do something that it could result in danger.

This means danger. It means that it could
cause bodily injury or death.

Warning

Caution

You are capable of doing something that might
result in physical injury or equipment damage.

Important Safety Information

Only trained and qualified service
personnel must install, replace or
service the phone.

Do not spill liquid like water on
the phone.

If so, call for the service
center. It may result in a fire or
an electric shock.

When smoke or smell something
burnng, unplug the power cord or
the phone line. Call for service
center. If left intact for long

time, it may be a cause of fire
of electric shock.

Choose a site with a dry and
well-ventilated area. It may

result in equipment damage.

Warning

Caution

Do not tug the power code or the
phone line. It may result in a

fire, an electric shock or
equipment damage.

Avoid placing the phone in a
vibrating area. If not, It may

result in equipment damage.

Do not drop or throw the phone. It
may

be a cause of an accident,

injury or breakdown.

Do not plug a lot of the power
cord in the outlet. It may result

in a fire or an electric shock.

Do not put the heavy things on
the phone.

It may

be a cause of

equipment damage.

Do not drop or throw the phone.

It may

be a cause of an

accident, injury or breakdown.

Do not install in the place where
shines on the rays of the sun or is
near the heating appliance.

It may

be a cause of fire or breakdown.

Avoid exposure to a volatile
matter such as benzene,
alcoholic and acetone. It may be

a cause of fire, transformation
and discoloration.

Choose a site with an air­conditioned area.

It may result in equipment
damage.

Install the phone in an area that
children can not reach at. It may

injure children or result in
equipment damage.

3

BTU

1. Introduction

The LDP-7000BTU can be connected to a compatible
Bluetooth headset that supports Bluetooth technology.
(version 1.1 or higher)
This allows you freedom to make and receive calls while
on the move or in the office.
Read this user's guide carefully before using the The
LDP-7000BTU.

2. Bluetooth wireless technology

Bluetooth headset is specially designed for special
phones(such as GSM, CDMA mobile phone)may be not
compatible with the LDP-7000 BTU.

The LDP-7000 BTU can be used with any compatible
Bluetooth devices that support the Handsfree or Headset
profiles. (Profile is a set of Bluetooth commands that the
phone uses to control the headset).

The LDP-7000BTU is compliant with and adopts the
Bluetooth Specification 1.1.
However, interoperability between the LDP-7000BTU and
other Bluetooth headset is not guaranteed because it
depends on compatibility.

A followed list is Bluetooth headset model supported by
The LDP-7000BTU.

- Jabra BT-200

- Jabra BT-250

- Plantronics M3000

- Motorola HS810

3. Installation of Option Modules

A BTU(BLUETOOTH Unit) module must be connected
to the LDP-7024D/24LD Digital Key telephones.

You can set up the phone to send and receive a call
through Bluetooth.
In the Bluetooth menu, you can manage connections and
define settings.

4

3-1. Unpacking

Unpack the box and check the items below :

3-2. Installation.

when installing or removing the option module the Line
power must be stopped.
If not, in the worst case, will damage the option module
or Keyset.

※ Caution Warning

The Optional Unit connection should make earlier
and break later than the line cord.

· After disconnecting the line,

unlatch the dummy cover.
(on the bottom of the keyset)

☞ Caution:

Please do not inserting the
dummy cover into Keyset
when unlatching.

· Connect the flat cable into the

optional connector on the
keyset, making sure that it is
connected securely.

※The connector number is

different according to the
keyset.

- LDP-7024D: CN1

- LDP-7024LD: CN6

· Hook the option module cover

onto the Keyset base (line up
the protrusions on the cover
with the receptacles on the
keyset base).
And then turn the screw
clockwise to tighten.

BTU Installation guide

(1ea)

Screw

(2ea)

2

1

Flat
cable

5

4. Before you use the LDP-7000 BTU

1. Make sure that the bluetooth headset is charged.

2. Enable the Bluetooth Usage. ( PGM +  + 4 )

For more information, see the user's guide of the LDP­7024D/24LD.

3. You must first pair LDP-7000 BTU with the headset
you want to use.
The Bluetooth connection between the headset and
LDP-7000 BTU can be established by setting up a
paired link.
With a paired link, the LDP-7000 BTU remembers the
headset's ID, and these 2 items are then ‘paired’
together - eliminating the need to repeat the set up
process with future use.

4. If you want to use another headset, you can erase
paired information and pair LDP-7000 BTU with new
headset.