LG LDT7797ST/00, LDT7797BD/00, LDT5665ST/00, LDT5665BD/00, LDT5665BB/00 Owner’s Manual

...
ENGLISH ESPAÑOL
OWNER'S MANUAL
DISHWASHER
Read this owner's manual thoroughly before operating the appliance and keep it handy for reference at all times.
LDT779#** LDP679#**
LDP567#** LDT566#**
MFL69261715
Rev.03_021817
Copyright © 2017 LG Electronics Inc. All Rights Reserved.
www.lg.com
2
TABLE OF CONTENTS
3 PRODUCT FEATURES
4 SAFETY INSTRUCTIONS
4 IMPORTANT SAFETY INSTRUCTIONS
9 PRODUCT OVERVIEW
9 Exterior Parts 10 Interior Parts 10 Accessories
11 INSTALLATION
11 Installation Parts and Tools 12 Installation Overview 12 Product Dimensions 12 Product Specifications 13 Preparing Cabinet Opening 14 Preparing Electrical Wiring 14 Preparing Water Supply Connection 15 Preparing Dishwasher 16 Sliding Dishwasher into Cabinet 17 Leveling the Appliance 18 Securing Dishwasher to Countertop 18 Connecting Drain Hose 20 Connecting Water Supply 20 Connecting Power 21 Final Check
37 SMART FUNCTIONS
37 Application Installation 37 Product Registration 37 Using the Tag On Function 38 Using the Wi-Fi Function 40 Using Smart Diagnosis™
41 MAINTENANCE
41 Cleaning the Exterior 41 Cleaning the Interior 41 Seasonal Maintenance and Storage 42 Clogged Drain Air Gap or In-Sink Disposal 43 Cleaning the Filters 44 Cleaning the Spray Arms
45 TROUBLESHOOTING
45 FAQs: Frequently Asked Questions 47 User Support Videos 48 Before Calling for Service
52 WARRANTY
22 OPERATION
22 Using the Appliance 23 Control Panel 24 Cycles 25 Options 26 Cycle/Option Guide 27 Loading the Dishwasher 27 Loading the Lower Rack 29 Loading the Silverware Basket 30 Loading the Upper Rack 33 Loading the Cutlery Rack (On Some Models) 35 Adding Cleaning Agents
ENGLISH
PRODUCT FEATURES
3PRODUCT FEATURES
QuadWash™ System
Multi-Motion lower spray arm shoots water in various directions and at optimized intensities to reach every area of the tub. This system provides more powerful and complete cleaning coverage.
Inverter Direct Drive Motor
LG's experience in motor technology results in extraordinary functionality, with advanced features like the Dual Zone option, whisper-quiet operation, energy efciency, and durability. The simple design and high build quality of the motor make it so reliable that it's covered for 10 years under the warranty.
EasyRack Plus
This easy-to-use system of adjustable tines and rack height provides more exibility and versatility when
loading dishes of various shapes and sizes.
Hybrid Drying System
This efcient drying system does not use a heating element during the drying process resulting in superior energy efciency and gentle care for dishes.
Smart ThinQ™
Download the new LG smart phone app to set options, self-diagnose and troubleshoot problems with the appliance, and other useful features. Some of these functions use Wi-Fi or NFC (Near Field Communication) technology and require an NFC-equipped smart phone.
4 SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the safety alert symbol and either the word WARNING or CAUTION.
These words mean:
WARNING
You may be killed or seriously injured if you do not follow instructions.
CAUTION
You may be slightly injured or cause damage to the product if you do not follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and
tell you what may happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of explosion, re, death, electric shock, scalding or injury
to persons when using this product, follow basic precautions, including the following:
California Safe Drinking Water and Toxic Enforcement Act
• This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
INSTALLATION
• Connect to a properly rated, protected, and sized power circuit to avoid electrical overload.
• To reduce the risk of severe injury or death, follow all installation instructions.
The appliance must be installed and electrically grounded by qualied service personnel in accordance with local codes.
• Disconnect the power supply line, house fuse or circuit breaker before installing or servicing the appliance.
When moving or installing the product in a different location, call qualied service personnel for installation and service.
• Keep packing materials out of the reach of children. Packaging material can be dangerous for children. There is a risk of suffocation.
• Moving or installation of the appliance requires two or more people.
• This appliance is not designed for maritime use or for mobile installations such as in RVs, trailers, or aircraft.
ENGLISH
• Store and install the appliance where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions.
• This appliance must be positioned near to an electrical power supply.
• Do not, under any circumstances, cut or remove the ground from the power supply line.
• When installing or moving the appliance, be careful not to pinch, crush, or damage the power supply line.
• Do not install the appliance in humid spaces.
• Destroy the carton, plastic bag, and other packing materials after the appliance is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers.
• Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged power supply line.
• Adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety glasses.
• The installer must ensure that the dishwasher is completely enclosed at the time of installation.
• Use new hoses when connecting the appliance to the water supply. Do not reuse old hoses.
• After installing, check the hose connection for leaks.
• Do not damage or place heavy items on the power supply line of the appliance.
OPERATION
• Repair or immediately replace all power supply lines that have become frayed or otherwise damaged. Do not use a power supply line that shows cracks or abrasion damage along its length or at either end.
• If you detect a strange sound, a chemical or burning smell, or smoke coming from the appliance, unplug it immediately, and contact an LG Electronics customer information center.
• Never unplug the appliance by pulling on the power supply line.
• Do not use an extension cable or adapter with this appliance.
• Do not grasp the power supply line or touch the appliance controls with wet hands.
• Do not modify or extend the power cable.
• If the product has been submerged, contact an LG Electronics customer information center for instructions before resuming use.
Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this or any other appliance.
• Keep the area underneath and around your appliances free of combustible materials (lint, paper, rags, etc.),
gasoline, chemicals and other ammable vapors and liquids.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• If the electrical supply line is damaged, it must only be replaced by the manufacturer or its service agent or
a similar qualied person in order to avoid a hazard.
• Do not abuse, sit on, or stand on the door of the appliance.
• Read all instructions before using the appliance and save these instructions.
• Use this appliance only for its intended purpose.
5SAFETY INSTRUCTIONS
6 SAFETY INSTRUCTIONS
• Do not allow children to play on, in or with the appliance. Close supervision of children is necessary when the appliance is used near children.
• Do not tamper with controls.
• In the event of a gas leak (propane gas, LP gas, etc.) do not operate this or any other appliance. Open a window or door to ventilate the area immediately.
• Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for
such a period, before using the appliance turn on all hot water faucets and let the water ow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is ammable, do not smoke or use an open ame during this time.
• Fix the drain hose securely in place.
• Use only detergents or wetting agents recommended for use in a dishwasher and keep them out of the reach of children.
• Do not let children eat detergent or dishwasher rinse agent.
• When loading items to be washed:
- Locate sharp items so that they are not likely to damage the door seal.
- Load sharp knives with the handles up to reduce the risk of cut-type injuries.
• Do not wash plastic items unless they are marked "dishwasher safe" or the equivalent. For plastic items not so marked, check the manufacturer’s recommendations.
• Do not touch the HEATING ELEMENT during or immediately after use.
• Do not operate your dishwasher unless all ENCLOSURE panels are properly in place.
• Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.
• Do not install or store the dishwasher where it will be exposed to weather conditions.
• After cleaning the dishes, turn off the faucet. Turn on the faucet again and check the connection status of water supply hose before cleaning.
• Do not open the door while operating. For safety reasons, the drain pump operates if the door is opened, resulting in a longer cycle time.
• Be careful not to catch your hand when closing the door of the product.
• Do not plug the dishwasher into a damaged outlet.
Do not install or keep the dishwasher near electrical components or exposed ames.
Do not wash dishes exposed to gasoline, solvents or other ammable materials.
• When cleaning, do not spray water on the product directly.
• Do not press buttons with a sharp object such as an awl or pin.
• Do not use solvent-based detergent.
• Do not come into contact with the steam outlet.
Small parts, such as rack clips and lter retaining posts can be a choke hazard to small children if removed from the dishwasher. Keep out of reach of small children.
ENGLISH
MAINTENANCE
• Do not repair or replace any part of the appliance. All repairs and servicing must be performed by qualied service personnel unless specically recommended in this Owner’s Manual. Use only authorized factory
parts.
• Do not disassemble or repair the appliance by yourself.
• Remove any dust or foreign matter from the power supply line.
• Disconnect this appliance from the power supply before cleaning and attempting any user maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply.
• Remove the door before the appliance is removed from service or discarded to avoid the danger of children or small animals getting trapped inside.
• Unplug the appliance before cleaning to avoid the risk of electric shock.
• Before discarding the appliance, cut off the power supply line and destroy the appliance's control panel.
GROUNDING INSTRUCTIONS
• For a permanently connected dishwasher: This appliance must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead to the appliance.
• Connect the ground wire to the green ground connector in the terminal box.
TIP OVER HAZARD
• Do not use the dishwasher until completely installed.
• Do not push down on the open dishwasher door.
• Failure to follow these instructions may result in serious injury or cuts.
7SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
8 SAFETY INSTRUCTIONS
CAUTION
To reduce the risk of minor injury to persons, malfunction, or damage to the
product or property when using this product, follow basic precautions, including the following:
INSTALLATION
Install the product on a rm and level oor.
• This dishwasher must be connected to a hot water supply with a temperature range between 120 °F (49 °C) and 149 °F (65 °C). This temperature range provides the best washing results and shortest cycle time. The temperature should not exceed 149°F (65 °C) to prevent damage to dishes.
• Do not put the drain hose under the dishwasher during installation.
OPERATION
• Do not place objects on top of the appliance.
• Turn off the water faucets and unplug the appliance if the appliance is to be left for an extended period of time, such as during vacations.
• Do not store or spill liquid detergents, cleaners, or bleaches (chlorine bleach, oxygen bleach) on the appliance. Doing so may result in corrosion, discoloration or damage to the surface of the appliance.
• Do not touch draining water which may be hot.
• If the drain hose and the water supply hose are frozen in winter, defrost before using the appliance.
• Do not put hands, feet, or metal objects below or behind the appliance.
• Do not put the drain hose under the dishwasher during installation.
ENGLISH
PRODUCT OVERVIEW
1
2
7
1
2
7
Exterior Parts
9PRODUCT OVERVIEW
1
2
3
Control Panel & Door Handle
Front Cover
3
Lower Cover
4
Shipping Brace
5
Safety Cover
6
Signal Light (some models)
4 5
6
1 2
5 6
7
3
7
8
4
8
Control Panel
Door Handle
3
Front Cover
4
Lower Cover
5
Shipping Brace
6
Safety Cover
9
Base
8
Leveling Feet
NOTE
• Do not remove the safety cover at any time.
Signal Light (some models)
Base
8
Leveling Feet
9
Signal Light (Front Display)
The top-control models have 3 indicator LEDs centered at the top of the front cover.
• Red : Error (See the Error Codes in Troubleshooting section.)
• White (steady): Normal operation
• White (blinking): Cycle has been paused. (After four minutes in pause mode, the machine turns off.)
Green: Cycle nished normally.
The green light stays on for 90 seconds. To keep the green light on until the door is opened, turn the power on, and then press and hold High Temp on
the control panel for 3 seconds until OFF or On appears in the display. The dishwasher remembers this setting until manually changed.
10 PRODUCT OVERVIEW
6
5
7
9
Interior Parts
1
2
3
4
5
NOTE
• The silverware basket ships installed at the back of the bottom rack. For best performance, install it along the right side as shown in the Interior Parts section.
• Remove all packing materials from the exterior and interior of the dishwasher before installing the appliance.
1
Top Wash Impeller
7
2
Upper Spray Arm
3
8
9
Lower Spray Arm
4
Filtration System
Detergent and Rinse Aid Dispenser
10
6
Drying Vent Cover
Tub Light (some models)
8
11
Cutlery Rack (some models)
Upper Rack
10
Silverware Basket
11
Lower Rack (appearance may vary)
• Press the tab to remove the cable tie by hand. Cutting the tie with a knife or scissors may damage the rack or the silverware basket.
Accessories
Included Accessories
3
2
Installation
brackets
(2ea)
Wood screws
(4ea)
Hose clamp
(1ea)
ENGLISH
INSTALLATION
Installation Parts and Tools
Parts not Provided
Electrical cable Water supply tube Fittings for tube Coupler Teon™ tape
11INSTALLATION
Air gap Wire nuts for
16-gauge wiring
Hose clamp ⅞" UL approved
strain relief
Electrical tape
Tools Needed
Flat-blade
screwdriver
Safety glasses Adjustable wrench Tape measure Utility knife Level
Phillips
screwdriver
Hole saw
min. 2½" bit
Electrical drill Gloves
Tubing cutter Nipper Pliers Wire stripper ¼" Square
drive wrench
12 INSTALLATION
Installation Overview
Preparing Cabinet Opening Preparing Electrical Wiring Preparing Water Supply Connection Preparing the Dishwasher Removing Lower Cover Sliding the Dishwasher into Cabinet
Leveling the Dishwasher Securing the Dishwasher to Countertop Connecting the Drain Hose Connecting Water Supply Connecting Power Final Check
Product Dimensions
Back view Side view
3
23 /4" (603 mm)
5 13
26 /8 - 26 /16" (676 - 681 mm)
5
24 /8" (625 mm)
5
1
4 /2"
(115 mm)
3
9 /8"
(238 mm)
11
4 /16"
(119 mm)
1
/4"
5
(134 mm)
33 /16"
(846 mm)
1
4 /2"
(115 mm)
15
2 /16" (75 mm)
3
4 /4" (120 mm)
3
20 /16" (512 mm)
Water supply hose, drain hose and electric cable should be passed through this area.
33 /8"
(854 mm)
NOTE
• For easiest installation, see marked areas above for water and electrical clearances in base of dishwasher.
Product Specications
The appearance and specications listed in this manual may vary due to constant product improvements.
Electrical requirement 120 V, 60 Hz AC only, minimum 15 A circuit breaker Water pressure 20 - 80 psi (140 - 550 kPa)
3
/4"(W) X 24 5/8"(D) X 33 5/8"(H)
Dimensions
Inlet water temperature 120 °F (49 °C) minimum, 149 °F (65 °C) maximum Net weight 72 - 89 lbs. (33 - 40 kg)
23
603 mm(W) X 625 mm(D) X 854 mm(H)
5
13INSTALLATION
ENGLISH
Preparing Cabinet Opening
This dishwasher is designed to t a standard
dishwasher opening. An opening may be needed on both sides to route plumbing and electrical connections.
24" (610 mm) min.
1
33 /
2" (851 mm) min.
24" (610 mm) min.
Select a location as close to the sink as possible
1
for easy connections to water and drain lines.
To ensure proper drainage, install the
2
dishwasher no more than 12 ft. (3.65 m) from the sink.
WARNING
• Don't use existing holes unless they are in the target area. Otherwise, the water supply and drain hose may be damaged by being crushed or kinked.
CAUTION
• Failure to properly locate the hole for the water and drain lines may prevent the dishwasher from
installing ush with the cabinets and could result
in kinked or damaged lines. Installation damage is not covered by the warranty, and leaks caused by improper installation may result in property damage.
For ush installations only, you may remove the
cabinet brace inside the cabinet.
Cabinet brace
If installing the dishwasher in a corner, leave a
3
minimum of 2" (50 mm) between the dishwasher and the adjacent wall.
To allow for proper clearance of plumbing and
4
electrical, use the template included with the literature to determine the clearance on the side of the cabinet where the cabinet meets the back wall. Using a 2 in the target area as shown on the template.
1
/2" diameter hole saw, drill a hole
4
9
14 INSTALLATION
(165 mm - 197 mm)
Preparing Electrical Wiring
Operate this appliance with the correct voltage
1
as shown in this manual and on the rating plate. Connect it to a dedicated, properly grounded branch circuit which is protected by a time delay fuse. Connect the appliance using 3-wires, including a ground wire.
If an outlet and other power connector are used,
2
it should be in an accessible location adjacent to and not behind the dishwasher and within 4 ft (1.2 m) of the dishwasher's side.
The wiring must be grounded properly. If in
3
doubt, have it checked by a qualied electrician.
Do not connect any other appliance to the same outlet.
Route the wiring.
4
Preparing Water Supply Connection
Make sure the house water supply is turned off before connecting the dishwasher water lines.
Connect the dishwasher to a hot water supply
1
with a temperature range between 120 °F (49 °C) and 149 °F (65 °C). This temperature range provides the best washing results and shortest cycle time. To prevent damage to dishes, the temperature should not exceed 149 °F (65 °C).
When connecting the dishwasher water line,
2
sealing tape or compound should be used on pipe threads to avoid leaks. Tape or compound
should not be used on compression ttings.
The water supply tube must be located in the left
3
side channel.
Electrical cable
Make sure the electrical cable is oriented in the
5
right side channel.
1
4 /2" - 6”
(115 mm - 152 mm)
WARNING
• For personal safety, remove house fuse or open circuit breaker before installation.
• Do not use an extension cable or adapter with this dishwasher.
NOTE
If you nd any damage to the dishwasher, contact your retailer or contractor.
• The included wire nut in 16AWG should be used.
1 3
6 /2" - 7 /4"
Water supply line
NOTE
• Use new hoses when connecting to the water supply. Do not reuse old hoses.
15INSTALLATION
ENGLISH
Preparing Dishwasher
Removable Rear Plastic Shipping Brace
The rear shipping brace can be removed if additional clearance is needed when installing the dishwasher under a low countertop.
NOTE
• Do not pull or lift the dishwasher using the handle; doing so can damage the door and hinges. Open the door and grab the body frame and the top front opening of the tub to move or lift the dishwasher.
Removing Lower Cover
Remove the two screws attaching the lower
1
cover to the dishwasher.
Remove the lower cover from the base.
2
Remove the insulation pad from behind the
3
access panel.
CAUTION
• If at any time the dishwasher is laid on its back, take care not to damage the drain hose.
NOTE
• Make sure that the lower cover replaces in the last step.
NOTE
• Do not push the door of the dishwasher with knees.
16 INSTALLATION
Attaching Mounting Hardware
For countertops made of wood or other material that will not be damaged by drilling, use the metal installation brackets.
Insert the installation brackets into the slots in
1
the upper frame.
2
Installation bracket
Bend the brackets to secure them to the
2
dishwasher tub.
1
Sliding Dishwasher into Cabinet
Slide the dishwasher carefully into the cabinet
1
opening.
Make sure the drain hose inside the cabinet is
2
not kinked or pinched.
Make sure the water supply line and electrical
3
supply are routed through the channels under the dishwasher.
To avoid a kinked or pinched drain hose, be
4
sure to pull on the drain hose while sliding the dishwasher into place. Do not allow any slack behind the dishwasher.
NOTE
• Installation brackets and screws can be found in the silverware basket.
For countertops made of granite, marble, or other materials that could be damaged by drilling, use the wood screws to attach the dishwasher to the cabinet. See installation instructions in Securing Dishwasher to Countertop.
Cap
Screw
After leveling the dishwasher, do not leave the
5
water supply line or power supply line under the base. This is a potential cause of water leaks. Place the water line and power supply line in the channel.
17INSTALLATION
ENGLISH
Leveling the Appliance
Check that dishwasher is level.
• Attach level on top front opening of tub from side to side.
• Attach level on front side of tub.
Level
Make sure that the gap between the door and the tub is equal on both the left and right sides.
The water level should be checked after the initial ll
on the Normal cycle. If the water level is not near the center of both tub lower indentations, the dishwasher may not be correctly leveled. The dishwasher may leak during operation if it is not correctly leveled.
Adjusting the Legs
Adjusting the Front Legs
Use a at-blade screwdriver or a pliers to turn the front legs and adjust the front of the tub.
• Turn the front legs clockwise to raise the front of the tub and counter-clockwise to lower it.
• The adjustments work identically for both front legs.
Adjusting the Rear Legs
• Use a Phillips screwdriver to adjust the back legs and the rear of the tub using the center screw at the base of the appliance in the front.
• Turn the center screw clockwise to raise the rear of the tub and counter-clockwise to lower it.
Water level should be near the center of both tub lower indentations.
NOTE
• To avoid damaging the screw, do not use an electric screwdriver.
18 INSTALLATION
Securing Dishwasher to Countertop
For countertops made of wood or other material that will not be damaged by drilling, use Method 1.
For countertops made of granite, marble, or other materials that could be damaged by drilling, use Method 2.
NOTE
Cover the lter hole with towels to prevent screws from falling down into the pump.
• Use a magnetic screwdriver.
Method 1
Using the provided screws, secure the dishwasher to the countertop through the holes in the bracket.
Screw
Installation bracket
NOTE
• Installation brackets and screws can be found in the silverware basket. See Attaching Mounting Hardware section for more information on attaching installation brackets to dishwasher.
Method 2
Remove the plastic caps from the mounting
1
bracket access holes.
Drive a wood screw through the mounting
2
bracket and into the cabinet frame.
Connecting Drain Hose
40"
(1016 mm)
max.
12"
(305 mm)
min.
If the end of the drain hose does not t the drain
line, use a heat and detergent resistant adapter (not supplied). These may be obtained from a local plumbing supply store.
The two typical connections are shown. To prevent siphoning, one of the following connections should be used.
5
/8"
(16 mm)
For air gap connections, cut off drain hose at dotted line
Drain Requirements
• Follow local codes and ordinances.
• Do not exceed 12 ft. (3.65 m) distance to drain.
• Do not connect drain lines from other devices to the dishwasher drain hose.
• If an extension drain hose is required, use inside diameter, 2-3 ft. length hose and a coupler for connecting the two hose ends.
3
/4"
(19 mm)
For disposal or waste tee connections
1"
(25 mm)
5
/8" or 7/8"
Reinstall the plastic caps.
3
Cap
Screw
Hose clamp
NOTE
• For drain hose installation, use the screw style clamp provided with this dishwasher in the silverware basket.
Coupler
Hose clamp
19INSTALLATION
ENGLISH
NOTE
• If the knockout plug has not been removed, the dishwasher will not be able to drain properly.
Connecting to Disposal with No Air Gap
Remove the knockout plug with a hammer and
1
screwdriver.
Knockout plug
Attach the drain hose to disposal with the hose
2
clamp provided. Move into position and tighten the hose clamp.
Connecting to Disposal or Waste Tee with Air Gap
Remove the knockout plug with a hammer and
1
screwdriver.
Connect end of the drain hose to the air gap with
2
hose clamp provided. This avoids water being siphoned from the tub.
Drain hose
Attach the rubber connector to disposal or waste
3
tee with the hose clamp provided. Move into position and tighten the hose clamp.
Air gap
Rubber hose connector
Connecting Waste Tee with No Air Gap
Remove the knockout plug with a hammer and
1
screwdriver.
Attach the drain hose to waste tee with the hose
2
clamp provided. Move into position and tighten the hose clamp.
Connecting without Air Gap
The height of the drain hose end must be at least 12" (305 mm) and within 40" (1016 mm) from the base of the appliance to avoid water being siphoned from the tub.
40"
(1016 mm)
max.
12"
(305 mm)
min.
Drain pipe
CAUTION
• Hole in side of cabinet may have sharp edges. Smooth or pad edges to avoid damaging drain hose.
20 INSTALLATION
1 2
1 2 3
4
Connecting Water Supply
Before connecting, turn off the water supply.
1
Slide the exible stainless-steel water line or
2
copper tube into the elbow.
Tighten the compression nut and make sure that
3
the line is not kinked or pinched.
Valve Water supply
NOTE
During the nal installation check of the dishwasher, an IE error code may appear on the display. Make sure the water line is not kinked and the water supply for the dishwasher has been turned on before calling for service.
line
Connecting Power
NOTE
• The best location for the electrical conduit is on the right side of the back wall. Re-route the power cable before installation if the electrical conduit pipe is longer than 3" (76 mm) and is centered on the back wall.
Before beginning, turn off electrical power to the
1
unit at the circuit breaker.
Remove the junction box cover and then install
2
the strain relief.
Twist the wire nuts tightly onto the wires; then
3
wrap each connection with electrical tape.
Check again and make sure that all wires are
4
connected correctly: black to black, white to white, green ground wire to green ground wire.
Replace the junction box cover.
5
WARNING
• Verify that the black wire is hot (120 V). If not, or if you are unsure of the power supply, have it checked by a licensed electrician.
CAUTION
• Do not leave stripped wire exposed. Trim
stripped wire to t completely inside wire nuts.
21INSTALLATION
ENGLISH
Final Check
Turn on electrical power.
1
Turn on house water supply.
2
Make sure the door opens and closes smoothly.
3
If necessary, level the dishwasher again.
Run the dishwasher on a Turbo cycle to verify
4
proper operation and check for leaks.
CAUTION
• Only install the lower cover provided with the machine. Do not install cabinet baseboard as it may cause noise and leakage.
Error Code Possible Cause and Solution
Drain hose kinked or pinched.
Feed the drainage and supply hoses through the hole under the sink. Then gradually slide the dishwasher into the cabinet while pulling on the hoses under the sink to take up any slack. This helps
OE Error
IE Error
avoid kinking the hoses or trapping them beneath the dishwasher.
Drain hose connected to disposal.
Remove knockout plug on disposal.
Waste tee is clogged.
Remove knockout plug on waste tee.
Water supply line kinked under dishwasher.
Feed the drainage and supply hoses through the hole under the sink. Then gradually slide the dishwasher into the cabinet while pulling on the hoses under the sink to take up any slack. This helps avoid kinking the hoses or trapping them beneath the dishwasher.
House water supply not turned on.
Cabinet baseboard
Lower cover
Turn water on.
22 OPERATION
OPERATION
Using the Appliance
Before Using the Appliance
• Read the Important Safety Instructions.
• Connect to the hot water supply only. The water supply temperature should be a minimum of 120°F (49°C) for better washing performance and shorter cycle time.
• Follow the instructions for loading the dishwasher to ensure effective cleaning.
• Remove insoluble items such as bones, toothpicks, and pieces of paper while loading the dishwasher.
When loading the dishwasher
Only load items that are dishwasher-safe.
1
Remove solid, burned-on scraps from dishes
2
prior to loading in the dishwasher.
Select the Cycle and Options
6
Select the cycle and options that best t the
load by referring to the Cycle guide. The display will show the estimated time for the cycle and options selected.
Operate the Dishwasher
7
Method 1
• Press the Start button and then close the door in less than four seconds to operate the dishwasher. If the door is not closed within four
seconds, the white LED with time ashes, an
audible tone is heard, and the cycle does not start.
Method 2
Close the door rst and then press the Start button to operate the dishwasher.
If the door is opened during the cycle, the dishwasher will stop. To resume the cycle, see methods 1 and 2 above.
Place items with deep dish bottoms at an angle
3
to help water run off and speed the drying process.
NOTE
• Do not load utensils that are not heat-resistant or have decorative metal trim.
Quick Start
Load the Dishes
1
Scrape the dishes free of excess food, bones, and any other hard, non-soluble residue. Pull each rack out and load the dishes as described in this manual.
Measure the Detergent
2
Using the guidelines in this manual, ll the
detergent cup with the recommended amount of detergent and close the lid. If a prewash is desired, the recess on top of the lid should also
be lled with detergent.
Close the Door
3
Turn on the Dishwasher
4
To turn on the display panel, press the Power button.
Check the Rinse Aid
5
The Rinse Aid rinse aid in the dishwasher is low. Add rinse aid if the level is low to maintain the effectiveness of the dry cycle.
icon will ash if the level of
NOTE
• If the door is opened during the cycle and is not closed within four seconds after selecting the Start button, or if the door is closed without pressing the Start button, the white LED with
time ashes, an audible tone is heard, and the
cycle does not start.
End of Cycle
8
When the cycle is complete, a chime will sound and the display will show End until the door is opened or Power is pressed. To save energy, press and hold High Temp for three seconds to set the End display to automatically turn off a few minutes after the cycle ends.
CAUTION
• Do not open the door during operation or immediately after it has completed the wash cycle as the steam build up may cause scalding as the door is opened.
NOTE
Empty the lower rack rst and then the upper rack. This will avoid water dripping from the upper rack onto dishes in the lower rack.
Auto-Off
The dishwasher automatically turns off after four minutes of inactivity if paused or if no cycle is started.
ENGLISH
Control Panel
2
3
1
23OPERATION
2
4
3
1
1
Power
• Press the Power button to turn power on and
off.
• After the cycle is complete, the power automatically turns off for purposes of safety and economy.
• If there is a power surge, power outage, or disruption of any kind, power is automatically turned off for safety.
• When power is connected again, it will turn on automatically and resume the cycle.
Display
: Rinse Aid Icon
- This icon illuminates when the rinse aid level is
low. The LED automatically shuts off when the
rinse aid is relled or the level is set to 0.
- Refer to the Rinse Aid Dispenser Adjustment
section.
: Digital Display
- The digital display on the control panel shows
the ESTIMATED cycle time. When the cycle and options are selected, the display shows the total estimated time to complete those selections. During operation, the display shows the remaining estimated operating time.
NOTE
• The estimated time shown on the display does not include delay times for heating water, etc.
• If Delay Start is selected, the display shows the delay time in hours.
• Cycle time may vary depending on the soil level of your load.
2
4
3
, : Control Lock
- The Control Lock feature helps prevent settings from being changed during a cycle. Selecting this feature locks all of the buttons, except for the Power button, on the control panel. This feature does not lock the door.
- While a cycle is running, press and hold Half Load and Energy Saver simultaneously for three seconds to activate or deactivate Control Lock.
- To start a new cycle, deactivate Control Lock.
: Wi-Fi (for Wi-Fi models)
- When the appliance is connected to the internet through a home Wi-Fi network, this icon illuminates.
- Press and hold Delay Start for approximately three seconds to connect to the network.
Cancel
• The drain pump activates and the cycle cancels.
Once the dishwasher nishes draining, the
power turns off.
• Press and hold Start for three seconds to
activate.
4
Start
• To operate the machine, either press Start and
close the door within four seconds or close the door and press Start.
• If Start button is not pressed to start the cycle,
an alert will sound.
Chime On/Off
• To activate or deactivate the button sounds,
press and hold Dual Zone and Energy Saver simultaneously for three seconds. The error alert sound cannot be turned off.
24 OPERATION
Cycles
Select your desired cycle.
Auto
This cycle senses the soil amount and soil toughness and is optimized to achieve the best cleaning.
Heavy
This cycle is for heavily soiled dishes and dishes with hardened on soil. The Heavy cycle defaults to the strongest spray intensity and uses it to wash heavily soiled dishes.
Delicate
Use this cycle to clean delicate items such as ne
china and stemware.
Normal
This cycle is for moderately soiled, everyday loads. Select the Night Dry option if leaving dishes overnight. Press and hold Extra Dry for three seconds to activate Night Dry.
• After the cycle ends, the fan runs for an hour to help vent the warm, moist air in the tub. You can stop the fan by opening the door after the cycle ends.
Turbo
This cycle will clean heavily soiled dishes in an hour using slightly more energy and water.
• This cycle does not have drying. Select the Extra Dry and Night Dry option or another cycle for better drying.
Download Cycle
Use a dedicated cycle downloadable via Wi-Fi or NFC.
NOTE
• Only the cycle code for the current Download cycle appears on the appliance. See the smartphone app for cycle codes, names, and more information about the available cycles.
- Default Cycle : P1. Pots & Pans
Machine Clean
This cycle is for cleaning the inside of the dishwasher. Use the cycle without dishes in the machine. It eliminates residual soils, odor, white spots, and other dirt. Add citric acid or another cleaning agent for more effective results.
• Press and hold Heavy for three seconds to activate.
NOTE
• The Machine Clean cycles. To activate or deactivate the icon, press the Delicate button for three seconds.
icon ashes every 30
Rinse
This cycle is a quick rinse for dishes that will not be washed immediately. The cycle rinses dishes that have excess soil to soften dried on residue. Rinsing the dishes helps prevent odors in the dishwasher. No detergent should be used.
• This cycle does not have drying.
• Press and hold Normal for three seconds to activate.
Express
This cycle will quickly clean lightly soiled dishes. (Time : 33 minutes)
• This cycle does not have drying. Select the Extra Dry and Night Dry option or another cycle for better drying.
• Press and hold Turbo for three seconds to activate.
25OPERATION
ENGLISH
Options
Select the desired cycle button and then select the options for that cycle.
Dual Zone
This option automatically sets the spray intensity to soft for the upper spray arm and strong for the lower spray arm. Place heavily soiled dishes like plates and bowls in the lower rack and lightly soiled dishes like cups and small plates in the upper rack to get the best results.
Half Load
This option washes intensively by selecting the upper or lower racks. For small loads, use just the upper or lower rack to save energy and time. By pressing the Half Load button, the settings cancellation of the Half Load option are available.
Energy Saver
This option saves energy by reducing the wash and rinse temperatures. Wash time is increased to maintain wash performance. Do not use this cycle with heavily soiled dishes.
, and the
High Temp
Raises the main wash temperature to improve cleaning.
Extra Dry
Select the Extra Dry option for better drying performance. This option adds extra drying time to the cycle and raises the heated rinse temperature.
• When the rinse aid is empty, the Extra Dry option is selected automatically.
Night Dry
Dishes are often left in the dishwasher overnight after the cycle ends. This can result in the steam inside the tub condensing on dishes, leaving them wet. The Night Dry option runs the ventilation fan periodically to help vent the steam from the tub.
• Press and hold Extra Dry for three seconds to activate.
• The Night Dry option is selected by default on all cycles for which it is available, except the Normal cycle.
Delay Start
The Delay Start feature delays the start of a selected cycle. Each time the Delay Start button is pressed, the delay time increases by an hour. The delay time can be set from 1 to 12 hours, in one-hour increments.
26 OPERATION
Cycle/Option Guide
The cycle guide below shows the available options for each cycle.
Cycle Auto Heavy Delicate Normal Turbo Express Rinse
Soil Level all levels heavy light all levels heavy light light
*Water Usage
**Wash Time with
Options (Mins.)
Dual Zone
Half
Load
***Energy
Saver
Available
Options
High
Temp Extra
Dry
Night
Dry
Delay
Start
13.1-
21.1 L
3.4-
5.6 gal
94 - 179 139 - 214 95 - 133 98 - 190 59 - 121 33 - 103 12 82
26.9 L
7.1 gal
19.7 L
5.2 gal
9.2-
19.5 L
2.4-
5.2 gal
27.5 L
7.3 gal
20.4 L
5.4 gal
6.8 L
1.8 gal
Machine
Clean
12.3 L
3.2 gal
* Actual water consumption will vary depending on soil level and hardness of water. ** The actual running time and cycle time displayed may change depending on options chosen, soil level, water
temperature, and hardness of water. Therefore, display time and actual running time can be different. *** Energy Saver cannot be used at the same time as Extra Dry or High Temp.
: Extra drying time only, no added high-temperature rinse.
: ON by default.
NOTE
• Options are not available for Download Cycle.
27OPERATION
ENGLISH
Loading the Dishwasher
The extra tall tub allows loading of dishes, pans, or other utensils up to 14" high.
For effective washing performance, always follow the following instructions.
• Remove large particles of food debris from plates including bones etc. before loading.
• Items with burnt on food should be soaked prior to loading in the dishwasher.
• Deep pots or dishes should be placed upside down.
• Make sure that all items do not touch each other.
Non-Dishwasher Safe Items
The combination of high water temperature and dishwasher detergents may damage certain items. Do not wash the following items in the dishwasher.
• Copper or anodised aluminium
• Hand painted silver or gold leaf crockery
• Wood or bone handled utensils
• Iron or non rust proof utensils
• Plastic items which are not dishwasher safe
• Expensive ware such as silver and dishes with golden rings
• Fragile item such as crystal glasses
CAUTION
• Do not place pots or pans with plastic handles in the appliance as the handles may deteriorate due to the heat and detergent.
• Water proof or long lasting lipstick smudges on glasses may not be removed during the wash.
Loading the Lower Rack
Loading 10 Place Settings
Loading 12 Place Settings
Lower Rack Loading Tips:
• Plates should be positioned upright and facing the center of the rack and pots, pans and large dishes must be turned upside down.
• Load dinner plates, dishes, soup bowls etc. between the tines.
• Load cookie sheets, cake pans and other large items on the sides or back of the rack. Loading these items in the front of the dishwasher can prevent the water spray from reaching the detergent dispenser.
• Make sure that pot handles and other large items do not stop the rotation of the spray arms.
• The lower rack should not be used for small items such as cups, wine glasses, or small plates. These items should be loaded in the upper rack.
• Make sure that large items do not interfere with the rotation of the spray arms, and do not prevent the detergent dispenser from opening.
28 OPERATION
Folding Down the Lower Tines
Fold tines down to t larger dishes; pull tines back up to t smaller dishes.
Case 1
Case 2
Loading Pots & Bowls
Loading Dishes & Pots
NOTE
• The silverware basket ships installed at the back of the bottom rack. For best performance, install it along the right side as shown.
29OPERATION
ENGLISH
Loading the Silverware Basket
The silverware basket has separators to avoid scratching and tarnishing of delicate silverware.
Loading 10 Place Settings
544
5
5
1
5
5
3 3
4
4
4
3
2
2
2
2
6
2
2
2 2
3 4 6 5
6
2
4
443
5 1
4
5
Silverware Loading Tips:
• For best cleaning results, use the top separators in the basket when loading silverware. The separators will prevent nesting of silverware.
• Load sharp items, such as knives, pointing down.
• When unloading the dishwasher, it is best to start with the silverware basket. Doing so will prevent water droplets from falling on your silverware from the upper rack.
5 5
WARNING
• Be careful when loading and unloading sharp items. Load sharp knives with the handles up to reduce the risk of personal injury.
Loading 12 Place Settings
544 5
5
1
5
1
3
4
4
4
3
2
2
2
2
2
2
6
6
2
3
4 6 5
4
4
4
42
515 1
5
30 OPERATION
Loading the Upper Rack
Loading 10 Place Settings
Loading 12 Place Settings
Upper Rack Loading Tips:
• Place cups and glasses in the rows between the rack tines. Placing them over the rack tines can lead to breakage and water spots.
• To avoid chipping, do not let stemware touch other items.
• Place items so that the open end faces down for cleaning and drying.
• Do not stack items on top of each other.
• Use the upper rack for small or delicate items such as small plates, cups, saucers, glasses, and dishwasher-safe plastic items.
• Cups, glasses, and bowls must be positioned upside down.
• Extra cups or cooking utensils can be laid on the fold down cup racks, which may also provide support for long-stemmed glasses.
• Make sure items do not interfere with the rotation of the spray arms above and below the upper rack.
• When loading larger items in the upper rack, such as wine glasses or taller cups, it may be necessary to remove the cutlery rack if one is present.
Loading the Cup Rack (On Some Models)
Some models have cup racks that provide support for long-stemmed glasses.
The cup racks can be folded up out of the way for tall glasses.
Loading...
+ 86 hidden pages