LG HBS-910 User guide
User’s Guide
LG TONE INFINIM™
Bluetooth® Wireless Stereo Headset
032
Rev 1.0 RU
English
Рyccкий
HBS-910 www.lg.com
Қазақша
Українська
Contact ofce for compliance of this product :
LG Electronics European Shared Service Center B.V.
Krijgsman 1, 1186 DM Amstelveen, The Netherlands
User’s Guide
LG TONE INFINIM™
Bluetooth® Wireless Stereo Headset
All rights reserved. LG Electronics Inc., 2016
NOTE: For the best performance and to prevent any damage to, or misuse of the HBS-910,
please read all of the information carefully prior to using the HBS-910.
Any modications or changes to this manual due to typographical errors or inaccuracies of
stated information shall only be made by LG Electronics Inc.
HBS-910
www.lg.com
ENGLISH
The LG TONE INFINIM (HBS-910) is a lightweight wireless headset that uses Bluetooth technology.
This product can be used as an audio accessory for devices supporting either the A2DP or Hands-Free
Bluetooth Prole.
ENGLISH
Safety Precautions
! CAUTION
Do not disassemble, adjust or repair the product unless necessary.
Do not place the product near excessive heat or ammable material.
Do not replace the battery unless it is necessary as it may explode.
The product may be damaged if an incompatible charger is used.
Make sure that infants and children do not swallow magnets or small components of the product.
If you have a medical device implanted, contact your doctor before use.
Do not pull the earphone cable with excessive force.
For your safety, do not remove this product’s battery.
If you must replace the battery, take the device to your nearest authorised LG Electronics service centre
for assistance.
The Li-Ion battery is a hazardous component which can cause injury.
Battery replacement by a non-qualied individual can cause damage to your device.
Do not replace the battery by yourself. The battery may be damaged, which can cause overheating and
injury. The battery must be replaced by an authorised service provider. The battery should be recycled or
disposed of separately from household waste.
! WARNING
Do not drop the product from a high place.
Make sure that no water, alcohol or benzene comes into contact with the product.
Do not store the product in a wet or dusty place.
Do not place any heavy objects on the product.
This product is not waterproof. Avoid humidity and water.
NOTE
If the product is exposed to excessive sweat, clean the product.
Always keep the earbuds of the earphones clean.
2
HD Speaker
If the communication network of the device you are connecting to supports HD Voice Calling,
you can enjoy making voice calls and listening to music in high denition.
Qualcomm® aptX™ audio
LG HBS-910 is powered by Qualcomm aptX audio. Qualcomm aptX audio is Bluetooth wireless
technology that provides clearer audio for listening to music and watching lms.
Qualcomm aptX audio is automatically enabled when a mobile phone or audio device supports it.
Product Components
ENGLISH
TONE INFINIM HBS-910
(Medium ear gels installed)
User’s Guide Warranty Card WEEE Card (Europe Only)
NOTE: Actual product design may differ from images shown in manual.
CAUTION
!
Make sure authentic LG Electronics components are used. Using a non-authentic component may damage
the product and thus void the warranty.
Extra Ear Gels
(small & large)
Micro USB Charging Cable
3
Product Description
ON OFF
ENGLISH
Indicator lamp
Retractable button
Power switch
Charging port
Call button
Microphone
Previous/Next
jog switch
Play/Pause/Stop button
NOTE: When you increase the volume level (up to level 16), you will hear a warning sound twice,
or a longer sound, starting from volume level 6.
Retractable earbuds
(left/right)
Battery Charging and Alerts
Open the Charging port cover and connect the charger to the Charging port.
Indicator Lamp Red Purple Blue
Battery Status Charging 80% Completed
Slide and hold the Volume jog switch in the volume down (-) direction for 1 second to check the
indicator lamp and battery level by voice.
Battery Status Sufcient Normal Insufcient
Indicator Lamp Blue ashes three times Purple ashes three times Red ashes three times
4
Volume jog switch
ON
OFF
ON OFF
ON
OFF
ON OFF
LG HBS910
LG
HBS-910 Pairing and Connecting
If you start the process after tting your earbuds, you can easily pair and
connect following the voice prompts.
NOTE: If you are prompted for the authorisation code (PIN Code), type 0000.
If you are informed that the battery is insufcient, recharge the battery
before proceeding with pairing.
If pairing is not completed within 3 minutes, the power automatically turns off.
When the power automatically turns off, slide the Power switch from the OFF to the ON position
to turn the power on.
Connecting Quickly
1 Slide the Power switch towards the ON position to turn on the power.
2 The blue indicator lamp turns on and the HBS-910 switches to Search mode.
3 From the mobile phone or device list, select LG HBS910 to connect.
4 A voice message will inform you that the connection is completed.
5 Use the same process to pair the HBS-910 with other devices.
Connecting Manually
1 Press and hold the Call button and slide the Power switch to the ON position to turn it on.
2 The blue indicator lamp turns on and the HBS-910 switches to Search mode.
3 Select LG HBS910 from the device list to connect.
ENGLISH
5
Multiple Connections
The HBS-910 can be connected to a mobile phone and a PC simultaneously.
NOTE: If simultaneously connected to two devices, the main functions work based on the Main
Connected Device.
ENGLISH
1 Press and hold the Call button and slide the Power switch to the ON position to turn it on.
2 Perform Steps 2 to 4 in “Connecting Quickly”. This device becomes the Main Connected Device.
3 Try to connect to HBS-910 using a previously connected device. This device becomes the
Sub Connected Device.
Automatic Reconnection
If you turn on the product, it automatically searches for and connects to the devices (Main Connected
Device and Sub Connected Device) to which it was previously connected. (If the product cannot nd the
device to which it was connected previously, the product switches to Search mode.)
If the product does not automatically connect to the device you want, search for your product in the
device you want to connect to and connect it manually.
Indicator Lamp
HBS-910 Status Description
Power On The blue indicator lamp ashes four times.
Power Off The blue indicator lamp ashes four times.
Search Mode The blue indicator lamp is on.
Headset/Hands-free
Prole Connected
Call Connected The blue indicator lamp ashes once every 5 seconds.
6
The blue indicator lamp ashes once every 5 seconds.
Mobile Calling Functions
Functions Description
Receiving a Call/
Hanging Up
Making a Call
Redial
Voice Dial
Switching Calls
Receiving a Call
While on the Phone
Rejecting a Call Press and hold the Call button for 2 seconds.
Enabling/Disabling
Mute
CAUTION: Do not disable/enable mute while driving, as changing this setting requires both hands.
NOTE: The Voice Dial and Redial functions work on the Main Connected Device or on the device
on which you made the last call. (The Voice Dial and Redial functions may work differently
depending on the mobile phone being used.)
Briey press the Call button.
If you want to turn off the Vibration function of the product, briey slide the
Volume jog switch in the volume down (-) direction.
If you make a call using a mobile phone, the call is automatically connected
to the HBS-910.
On some mobile phones, you should briey press the Play/Pause/Stop button
twice to switch calls.
Press and hold the Call button for more than 1 second to place a call to the
last number you called.
Briey press the Call button.
If the mobile phone does not support the Voice Dial function, you can use the
Redial function.
Briey press the Play/Pause/Stop button twice during a call.
(Every time you press one of these buttons, the call switches to the mobile
phone or the HBS-910.)
You can receive another call while on the phone by pressing and holding the
Call button for 1 second.
The existing call switches to call waiting status. Press and hold the Call button
again for 1 second to switch back to the previous call.
Briey press the Call button to hang up in the middle of a call or to hang up
both calls.
(This feature works differently depending on the mobile phone settings.)
Simultaneously slide and hold the Volume jog switch in the volume up (+)
direction, and slide and hold the Previous/Next jog switch in the position
for 1 second.
ENGLISH
7
Playing Music
Functions Description
ENGLISH
Play
Pause Briey press the Play/Pause/Stop button.
Stop Press and hold the Play/Pause/Stop button for 1 second.
Play Previous/Next Song
Fast Rewind/Forward
Change Equaliser Mode
Switching Music Players
If you stop in the middle of playback and then play music on either of the two connected devices,
the HBS-910’s music playback and control changes to that device.
Briey press the Play/Pause/Stop button.
Music will play from the activated player of the connected device.
Briey slide the Previous/Next jog switch into the or position.
Slide the Previous/Next jog switch in the or position until you reach
the desired section of the track.
Briey press the Play/Pause/Stop button twice. Changes modes with a
beeping sound in the following order:
Bass Boost (default) > Normal > Treble Boost.
Vibration Alert Settings
Slide and hold the Volume jog switch in the volume up (+) direction for 2 seconds when the
HBS-910 is not in use.
If you turn off the vibration alerts, it will not vibrate even when a call is being received or when you are
out of communication range.
NOTE: The vibration alert is automatically set to the ON position when you turn on the power.
8
Out of Range
If the device connected to the product is out of effective communication range (33 feet / 10 meters),
the communication signal becomes weak and the communication is lost.
If the device comes back within effective communication range, the product automatically
reconnects to the device. If the device is not automatically reconnected, press the Call button on
the product to connect to it manually.
If a device that is not in use goes out of communication range when multiple devices are connected,
the product vibrates and a voice message indicates that the connection is lost.
In this case, the automatic reconnection function is not supported.
Find Me
To nd your handset, simultaneously slide and hold the Volume jog switch and the Previous/Next
jog switch in the same direction for 1 second as shown in gures 1 and 2.
For example:
1 Simultaneously slide and hold the Volume jog switch in the volume up (+) position and the
Previous/Next jog switch in the position for 1 second.
2 Simultaneously slide and hold the Volume jog switch in the volume down (-) position and the
Previous/Next jog switch in the position for 1 second.
ENGLISH
9
LG Tone & Talk™
Tone & Talk supports various functions including text and voice directions,
and calling. Go to the Google Play™ store and search for “LG Tone & Talk” or
ENGLISH
scan the QR code on the right to install Tone & Talk.
NOTE: Tone & Talk can be used on Android™ smartphones.
Function Action
Current Time Alert
Voice Memo
Reading Recent
Messages
Find Me
Using Speed Dial to
Make a Call
Using Favourites to
Make a Call
Making a Call from
Call History
Changing the voice
prompt language
NOTE: The Current Time Alert and the Voice Memo features cannot be used at the same time.
You can only use one function at a time when you make selections in the Tone & Talk app.
10
1. Go to Tone & Talk and select Current time alert.
2. Slide and hold the Previous/Next jog switch to the position for 1 second.
1. Go to Tone & Talk and select Voice memo.
2. Slide and hold the Previous/Next jog switch to the position for 1 second.
(This feature may not be supported on some devices.)
Slide and hold the Previous/Next jog switch in the position for 1 second.
Simultaneously slide and hold the Volume jog switch and the Previous/Next jog
switch in the same direction for 1 second.
1. Go to Tone & Talk and select a speed dial contact.
2. Briefly press the Call button twice.
(The number should be specified in the Tone & Talk app.)
1. Go to Tone & Talk and select a favourite contact.
2. Briefly press the Call button twice.
3. Slide and hold the Previous/Next jog switch in the or position for
1 second to select a number.
4. Briefly press the Call button twice.
1. Go to Tone & Talk and select Call History.
2. Briefly press the Call button twice.
3. Slide and hold the Previous/Next jog switch to the or position for
1 second to select a Call History number.
4. Briefly press the Call button twice.
1. Select Advanced > View more in Tone & Talk.
2. Select Voice prompt language to change the language.
Summary of HBS-910 Functions
Function
Power On Power off Slide the Power switch to the ON position.
Power Off Power on Slide the Power switch to the OFF position.
Volume Up
Volume Down
Transferring a Call Talking Press the Play/Pause/Stop button twice.
Answering a Call Ringing Briey press the Call button.
Stop Incoming Call
Vibration Alerting
Vibration On/Off Idle
Find Me Power on
Ending a Call Talking Briey press the Call button.
Call Waiting Talking Press and hold the Call button for 1 second.
Last Number Redial Idle Press and hold the Call button for 1 second.
Voice Dialling (must be
supported by handset)
Call Reject Ringing Press and hold the Call button for 2 seconds.
Mic Mute On/Off Talking
Pairing Mode (Manual)
Battery Status Check Idle
HBS-910 Status
Talking/
Music on
Talking/
Music on
Ringing
Idle Briey press the Call button.
Power off
Action
Slide the Volume jog switch to the volume up (+) position.
Slide the Volume jog switch to the volume down (-) position.
Briey slide the Volume jog switch to the volume down
(-) position.
Slide and hold the Volume jog switch to the volume up
(+) position for 2 seconds.
Simultaneously slide and hold the Volume jog switch
and the Previous/Next jog switch in the same direction
for 1 second.
Simultaneously slide and hold the Volume jog switch in
the volume up (+) position and the Previous/Next jog
switch in the position for 1 second.
Simultaneously press and hold the Call button and slide
the Power switch to the ON position for 2 seconds.
Slide and hold the Volume jog switch in the volume
down (-) position for 1 second.
ENGLISH
11
Play Power on Briey press the Play/Pause/Stop button.
Pause Music on Briey press the Play/Pause/Stop button.
Stop Music on Press and hold the Play/Pause/Stop button for 1 second.
ENGLISH
Next Song Music on
Previous Song Music on
Fast Forward Music on
Rewind Music on
Equaliser Settings Music on Briey press the Play/Pause/Stop button twice.
Briey slide the Previous/Next jog switch to the
position.
Briey slide the Previous/Next jog switch to the
position.
Slide and hold the Previous/Next jog switch in the
position.
Slide and hold the Previous/Next jog switch in the
position.
Troubleshooting
Problems Solutions
The power does not
turn on
Cannot make a call
with the HBS-910
Cannot register the
HBS-910 to the
mobile phone
The sound is low Control the sound level of the device connected to the HBS-910.
12
Check the battery level and charge if necessary.
If the mobile phone does not support headset and hands-free functions,
you cannot use the calling features.
Check the battery level and charge if necessary.
Check whether the HBS-910 is turned on.
Check whether the HBS-910 is in Search mode.
- Simultaneously press and hold the Call button and slide the Power switch
to the ON position and the HBS-910 switches to Search mode.
Specications and Features
Item Comments
Bluetooth Specications V 4.1 (Headset/Hands-Free/A2DP Prole/AVRCP Prole)
Battery Battery 3.7 V / 210 mAh, Li-Polymer
Standby Time Up to 22.5 days*
Talk Time Up to 16 hours*
Music Play Time Up to 10.5 hours*
Charging Time Less than 2 hours
Rated Input Voltage DC 4.75 V ~ 5.3 V, 400 mA
Operating Temperature -10 ˚C (+14 °F) ~ +50 ˚C (+122 °F)
Dimensions/Weight 145 mm (W) X 175 mm (L) X 14.7 mm (H) / 51 g
Operating Frequency 2402 MHz to 2480 MHz
*Certain features may use more power and cause actual time to vary.
ENGLISH
13
Declaration of Conrmation
FCC NOTICE TO USERS :
This device complies with part 15 of the FCC rules.
ENGLISH
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
IMPORTANT NOTE :
To comply with the FCC RF exposure compliance requirements, no change to the antenna or the
device is permitted. Any change to the antenna or the device could result in the device exceeding the
RF exposure requirements and void user’s authority to operate the device.
DECLARATION OF CONFORMITY :
Hereby, LG Electronics declares that this HBS-910 is in compliance with the essential
requirements and other relevant provisions of Directive1999/5/EC. A copy of the
Declaration of Conformity can be found at http://www.lg.com/global/declaration
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
Qualcomm® aptXTM audio is a product of Qualcomm Technologies International, Ltd.
FCC ID: ZNFHBS910
14
Additional Information
1. Radio frequency exposure
This Bluetooth Stereo Headset HBS-910 is a radio transmitter and receiver. When in operation,
it communicates with a Bluetooth equipped mobile device by receiving and transmitting radio
frequency (RF) electromagnetic elds (microwaves) in the frequency range 2.4 to 2.4835 GHz.
Your Bluetooth Headset is designed to operate in compliance with the RF exposure guidelines and
limits set by national authorities and international health agencies when used with any compatible
LG Electronics mobile phone.
2. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially explosive atmosphere. It is rare,
but your electronic device could generate sparks. Sparks in such areas could cause an explosion or
re resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often,
but not always, clearly marked.
3. Battery information
A rechargeable battery has a long service life if treated properly. A new battery or one that has not
been used for a long period of time could have reduced capacity the rst few times it is used.
Do not expose the battery to extreme temperatures, never above +50° or below -10°.
For maximum battery capacity, use the battery in room temperature. If the battery is used in low
temperatures, the battery capacity will be reduced. The battery can only be charged in temperatures
between +10° and +45°.
Removal of waste batteries and accumulators (Product with embedded battery ONLY)
- In case this product contains a battery incorporated within the product which cannot be readily
removed by end-users, LG recommends that only qualied professionals remove the battery,
either for replacement or for recycling at the end of this product’s working life. To prevent damage
to the product, and for their own safety, users should not attempt to remove the battery and
should contact LG Service Helpline, or other independent service providers for advice.
- Removal of the battery will involve dismantling of the product case, disconnection of the electrical
cables/contacts, and careful extraction of the battery cell using specialized tools. If you need the
instructions for qualied professionals on how to remove the battery safely, please visit
http://www.lge.com/global/sustainability/environment/take-back-recycling.
ENGLISH
15
4. Recycling the battery in your
The battery in your Bluetooth Headset must be disposed of properly and should never be placed in
municipal waste.
Disposal of waste batteries/accumulators
ENGLISH
1 This symbol may be combined with chemical symbols for mercury (Hg), cadmium
(Cd) or lead (Pb) if the battery contains more than 0.0005% of mercury, 0.002% of
cadmium or 0.004% of lead.
2 All batteries/accumulators should be disposed separately from the municipal waste
stream via designated collection facilities appointed by the government or the
local authorities.
3 The correct disposal of your old batteries/accumulators will help to prevent
potential negative consequences for the environment, animal and human health.
4 For more detailed information about disposal of your old batteries/accumulators,
please contact your city ofce, waste disposal service or the shop where you
purchased the product.
5. Conditions
- The warranty is valid only if the original receipt issued to the original purchaser by the dealer,
specifying the date of purchase and serial number, is presented with the product to be repaired or
replaced. LG Electronics reserves the right to refuse warranty service if this information has been
removed or changed after the original purchase of the product from the dealer.
- If LG Electronics repairs or replaces the product, the repaired or replaced product shall be
warranted for the remaining time of the original warranty period or for ninety (90) days from
the date of repair, whichever is longer. Repair or replacement may involve the use of functionally
equivalent reconditioned units. Replaced parts or components will become the property of
LG Electronics.
- This Warranty does not cover any failure of the product due to normal wear and tear, or due
to misuse, including but not limited to use in other than the normal and customary manner, in
accordance with instructions for use and maintenance of the product. Nor does this warranty
cover any failure of the product due to accident, modication or adjustment, acts of God or
damage resulting from liquid.
- This warranty does not cover product failures due to improper repair installations, modications
or service performed by a non-LG Electronics authorized person. Tampering with any of the seals
on the product will void the warranty.
16
Bluetooth
Headset
Limited Warranty
SUBJECT TO THE CONDITIONS OF THIS LIMITED WARRANTY, LG ELECTRONICS WARRANTS THIS
PRODUCT TO BE FREE FROM DEFECTS IN DESIGN, MATERIAL AND WORKMANSHIP AT THE TIME
OF ITS ORIGINAL PURCHASE BY A CONSUMER, AND FOR A SUBSEQUENT PERIOD OF ONE (1)
YEAR. SHOULD YOUR PRODUCT NEED WARRANTY SERVICE, PLEASE RETURN IT TO THE DEALER
FROM WHOM IT WAS PURCHASED OR CONTACT YOUR LOCAL LG ELECTRONICS CONTACT
CENTER TO GET FURTHER INFORMATION.
Important safety information
Avoiding hearing damage
Permanent hearing loss may occur if you use your Handsfree car kit at a high volume. Set the volume
to a safe level. You can adapt over time to a higher volume of sound that may sound normal but can
be damaging to your hearing.
If you experience ringing in your ears or mufed speech, stop listening and have your hearing checked.
The louder the volume, the less time is required before your hearing could be affected.
Hearing experts suggest that to protect your hearing:
• Limit the amount of time you use Headset at high volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking near you.
Please refer to your handset user guide for more information on how to adjust listening levels on
your handset.
Using headsets safely
Use of Headset to listen to music while operating a vehicle is not recommended and is illegal in
some areas. Be careful and attentive while driving. Stop using this device if you nd it disruptive or
distracting while operating any type of vehicle or performing any other activity that requires your
full attention.
ENGLISH
17
Руководство пользователя
LG TONE INFINIM™
Беспроводная стереогарнитура Bluetooth
Все права сохранены. LG Electronics Inc., 2016
ПРИМЕЧАНИЕ: Для наилучшего качества работы, а также предотвращения любых
повреждений или неправильного использования HBS-910 внимательно прочитайте
информацию по использованию HBS-910.
Любые изменения и исправления типографских ошибок или неточной информации в
данном руководстве могут быть внесены только LG Electronics Inc.
HBS-910 www.lg.com
®
РУССКИЙ
LG TONE INFINIM (HBS-910) — это легкая беспроводная гарнитура, созданная на
базе технологии Bluetooth.
Данный продукт можно использовать в качестве аксессуара с устройствами,
поддерживающими профиль A2DP или Bluetooth.
Особые указания по технике безопасности
! ВАЖНО
Не разбирайте, не изменяйте и не ремонтируйте продукт самостоятельно.
РУCCКИЙ
Не кладите продукт вблизи источников высоких температур и легковоспламеняющихся материалов.
Не пытайтесь выполнить замену аккумулятора самостоятельно, поскольку это может
привести к его взрыву.
Продукт может быть поврежден при использовании несовместимого зарядного устройства.
Следите за тем, чтобы маленькие дети не проглотили магниты и другие небольшие детали
продукта.
При наличии имплантированного медицинского прибора проконсультируйтесь с врачом
перед использованием устройства.
Во время вытягивания кабеля наушников не прикладывайте чрезмерных усилий.
Для вашей безопасности не извлекайте аккумулятор, встроенный в продукт.
Если вам необходимо заменить аккумулятор, отнесите его в ближайший авторизованный
сервисный центр LG Electronics или обратитесь за консультацией к продавцу.
Литий-ионный аккумулятор является опасным компонентом, который может привести к травме.
Замена аккумулятора неквалифицированным специалистом может привести к повреждению
устройства.
Не производите замену аккумулятора самостоятельно. Аккумулятор может быть поврежден,
в результате чего он может перегреться и стать причиной травмы. Замена аккумулятора
должна производиться авторизованным поставщиком услуг. Переработка или утилизация
аккумулятора должна осуществляться отдельно от бытовых отходов.
! ПРЕДУПРЕЖДЕНИЕ
Не роняйте продукт с большой высоты.
Следите за тем, чтобы на продукт не попадали вода, спирт или бензол.
Не храните продукт в сырых или пыльных местах.
Не ставьте на продукт тяжелые предметы.
Данный продукт не является водонепроницаемым. Избегайте использования в условиях
высокой влажности и не допускайте попадания воды на продукт.
2
ПРИМЕЧАНИЕ
Если на продукт часто попадает пот, выполните очистку продукта.
Поддерживайте чистоту наушников-вкладышей.
Динамик HD
Вы можете совершать голосовые вызовы и слушать музыку в режиме аудио высокой
четкости, если сеть передачи данных на устройстве, к которому подключена
гарнитура, поддерживает передачу голосовых данных в формате HD.
Qualcomm® aptX™ audio
В устройстве LG HBS-910 используется технология обработки звука Qualcomm aptX.
Qualcomm aptX — это беспроводная технология Bluetooth для воспроизведения
более качественного звука во время прослушивания музыки и просмотра фильмов.
Функция обработки звука с помощью Qualcomm aptX активируется автоматически,
если мобильный телефон или аудиоустройство поддерживают эту технологию.
Компоненты продукта
РУCCКИЙ
TONE INFINIM HBS-910
(Установлены подушечки
среднего размера)
Руководство пользователя Гарантийный талон Карта WEEE
ПРИМЕЧАНИЕ. Дизайн реального продукта может отличаться от изображений в
настоящем руководстве.
Дополнительные подушечки
(маленькие и большие)
Зарядный кабель Micro USB
(только для Европы)
3
ВАЖНО
ON OFF
!
Убедитесь, что используются оригинальные компоненты LG Electronics. Использование
неоригинальных компонентов может привести к повреждению продукта и аннулированию гарантии.
Описание продукта
РУCCКИЙ
Переключатель
композиций
Кнопка воспроизведения/
ПРИМЕЧАНИЕ. Как только во время регулировки громкости будет достигнут уровень
громкости 16, дважды раздастся звуковой сигнал. На уровнях
громкости 6 и выше будет раздаваться длинный звуковой сигнал.
Переключатель
Индикатор
скручивания провода
паузы/остановки
питания
Кнопка для
Разъем для подключения
зарядного устройства
Переключатель громкости
Кнопка вызова
Микрофон
Выдвигаемые наушники
(левый/правый)
Зарядка аккумулятора и оповещения
Откройте крышку разъема для подключения зарядного
устройства и подключите зарядное устройство.
Индикатор Красный Фиолетовый Синий
Статус заряда
аккумулятора
4
Зарядка 80% Заряжен
Loading...