LG HBS-900 User Guide [zh]
HBS-900 User Manual
ON
OFF
Bluetooth® Stereo Headset
n
o
d
r
a
k
/
n
a
m
r
a
h
Any modications or changes to this manual due to
typographical errors or inaccuracies of stated information
English
繁體中文
简体中文
Rev 1.0 TW
All rights reserved.
LG Electronics Inc., 2014
Note: For the best performance and
to prevent any damage to, or misuse of the
HBS-900, please read all of the information
carefully prior to using the HBS-900.
shall only be made by LG Electronics Inc.
Description of parts
ON
OFF
ENG
Charging Port
FF/REW Switch
PLAY/PAUSE/STOP
Button
Earbud (R)
LED Indicator
n
o
d
r
a
k
/
n
a
m
r
a
h
Earbud Wire
Retraction Button
CALL Button
Microphone
Earbud (L)
VOLUME Switch (+/-)
Package Contents
Ear Gels (2 Sets)
USB Charging Cable
Specications
Bluetooth® specication
Battery
Standby time / Talk Time Up to 550 hours / Up to 17 hours
Music play time Up to 14 hours
Charging time Less than 2 hours
Charging rated input DC 4.75 V ~ 5.6 V, 400 mA
Operation temperature -10°C ~ 60°C
Dimension / weight 155 mm (W) x 178 mm (L) x 15 mm (H)/54 g
2
Item Description
3.0 (Headset / Hands-Free / A2DP Proles)
Battery 3.7 V / 220 mAh Li-Polymer
Power Switch
Retraction Button
User Manual
Earbud Wire
OFF
ON
How to Use
Power On / Power Off
- Slide the Power switch to the ON or OFF position.
Charging
- When the charger is connected (with the power on or off) the headset will turn off.
- While charging, the LED indicator will show a solid red light and then change to
violet when charged 80% and above.
- When charging is completed, the LED indicator will show a solid blue light.
Low Battery
- An announcement will be made once every 2 minutes.
- If the battery is not charged, the headset will turn off.
Battery Status Alert
- Slide the VOLUME switch to the - position for 1 second.
- There are 3 levels of battery power.
Battery Status High Medium Low
Voice Prompt Battery High Battery Medium Battery Low
LED Indicator
- The HBS-900 battery status indicator will appear on the G3 and iPhone screen.
Retractable Earbud Wire
- By pulling the left or right earbuds, the earbud wires can be extended.
- Pressing the Earbud Wire Retraction button winds the earbud wire automatically.
Blinking
Blue
3 times
Blinking
Violet
3 times
Blinking
Red
3 times
ENG
3
How to Use
Pairing
ENG
- Before using the headset for the rst time, you must pair it with a Bluetooth-enabled
handset.
- To pair your headset with an additional handset, the headset must be placed in
Pairing Mode.
- There are 2 Pairing Mode Methods with the HBS-900.
Easy Pairing (First Time Pairing)
1. Slide the Power switch to the ON position to turn on the HBS-900. When the
headset enters Pairing Mode, the LED indicator will show a solid blue light.
2. Using your handset, nd the Bluetooth Menu and search for or add new devices.
• Select LG HBS900 from the list of devices and pair it with your handset.
3. If asked for the Pass/PIN code please enter 0000 (4 Zeros).
* Note : If your handset supports Secure Simple Pairing (SSP), you will not need to
enter Pass/PIN code.
• Once pairing has completed successfully, you will hear “Your headset paired.”
• The HBS-900 will automatically turn off if not paired within 3 minutes.
Manual Pairing (Pairing with another phone or re-pairing)
• With the power off, press the CALL button and slide the Power switch to the ON
position at the same time for 2 seconds.
• When the headset enters Pairing Mode, the LED indicator will show a solid blue
light. After the procedure repeat Easy Pairing steps 2 through 3.
4
How to Use
Multi-connection
Advanced Multipoint
The HBS-900 is capable of having two devices connected to the headset at the
same time. This will give you the freedom of using call waiting between calls on
both of your connected phones.
Connection
- Pair the headset with one of your Bluetooth-enabled handsets (see the pairing
instructions on page 2).
- Turn off the headset.
- With the power off, press the CALL button and slide the Power switch to the ON
position at the same time for 2 seconds to enter Manual Pairing mode.
- Pair and connect the headset with your other Bluetooth-enabled handset. (this
will be your primary handset).
- Once this handset is paired and connected, go back and connect the originally
paired handset to the headset. This will now be your secondary handset.
* NOTE: When the HBS-900 is connected to two handsets at the same time
(Multipoint), the headset calling functions will work with the primary handset.
* NOTE: In case of failure to connect to the primary phone through Easy Pairing,
HBS-900 will enter pairing mode.
Calling Function
- Voice Dialing and Last Number Redial features work with the primary handset (or
handset which made the last outgoing call).
Call Waiting
- While speaking on an active call, press the CALL button for 1 second to switch
to an incoming call.
- To switch between 2 active calls, press the CALL button for 1 second.
- To terminate the active call or both calls at once, briey press the CALL button.
- If both handsets are receiving an incoming call, the headset will default to the
primary device.
ENG
5
How to Use
Auto Reconnect
ENG
- If the HBS-900 is turned off (either accidentally or intentionally) while connected
to a handset, the headset and handset will disconnect. The headset and handset
will automatically reconnect when the HBS-900 is turned back on while in range.
- The secondary handset need to be connected via selecting LG HBS900 from the
list of devices at Bluetooth menu.
Out of range
- If the paired devices are separated by a range of 10 meters(33 feet) or more, the
headset and handset will disconnect and HBS-900 will vibrate to alert.
* If vibrate is set to off by sliding the VOLUME switch to the + position and hold for
2 seconds, HBS-900 will not vibrate.
- If the headset and handset do not automatically reconnect when they are back
within the required range, briey press the CALL button on the HBS-900 to
reconnect manually.
* It is possible to use these functions only when your handset supports them. For
further information about using these features, please consult your handset’s
user manual.
- While in multi-connection and streaming, the inactive paired device, which is
out of range, will be disconnected. The HBS-900 will alert once with no attempt
to reconnect.
Calling
Answering a call / Ending a call
- When there is an incoming call, the headset will ring and vibrate.
* HBS-900 will not vibrate if vibration function is on ‘off’.
- Briey slide the VOLUME switch to the - position to stop the vibration.
- Briey press the CALL button.
Transferring a call
- While on a call on your handset, press the PLAY/PAUSE/STOP button twice
on the HBS-900 to transfer the audio either from headset to handset or from
handset to headset.
6
How to Use
Voice dialing
- Briey press the CALL button to activate Voice Command.
Note: If the handset does not support Voice Dialing, it is possible that performing
this action will activate Last Number Redial.
Last number redial
- Press and hold the CALL button for 1second to activate Last Number Redial.
The headset will beep, and call the last number dialed.
Call waiting
- Answer a second call without hanging up the rst call by pressing the CALL
button for 1 second (you will hear a beep). Press the CALL button for 1second to
turn to the original call.
- Briey press the CALL button to terminate the active call or both calls at once.
(subject to handset’s support)
Rejecting a Call
- Press the CALL button for 2 seconds when the handset rings.
Mic Mute
- Slide the VOLUME switch to the + position and the FF/REW switch to the
REW position at the same time for 1 second to mute/unmute the Mic during
conversation.
* Precaution : For your safety, do not operate microphone mute during driving.
Volume control
- Slide the VOLUME switch to the + or - position.
Audio streaming controls
- PLAY : Briey press the PLAY/PAUSE button.
- PAUSE : Briey press the PLAY/PAUSE button.
- STOP : Press and hold the PLAY/PAUSE button.
- NEXT SONG : Briey slide the FF/REW switch to the FF position.
- PREVIOUS SONG : Briey slide the FF/REW switch to the REW position.
- FAST FORWARD : Slide and hold the FF/REW switch to the FF position.
- REWIND : Slide and hold the FF/REW switch to the REW position.
ENG
7
How to Use
Equalizer
ENG
- While playing music, press the PLAY/PAUSE/STOP button twice to switch between
Bass Boost (default), Normal, and Treble Boost.
- The bass coming from the speakers can vary as a result of the size of the ear gel
that is being used.
®
aptX
- The HBS-900 features aptX® technology that ensures audio content transmitted via
Bluetooth is instant and crystal-clear.
- aptX® is automatically enabled as long as the source device supports it.
Vibrate Control
- To activate or deactivate the Vibrate function, slide the VOLUME switch to the +
position for 2 seconds. You will hear “Vibrate on” or “Vibrate off” when it is activated
or deactivated.
- When the HBS-900 is set to vibrate off, the headset will not vibrate when receiving an
incoming call or when it is out of range.
- By powering the unit off and then powering the unit back on, the vibration functionality
will be activated.
8
How to Use
SMS Reader
The HBS-900 Bluetooth headset supports SMS reading on
AndroidTM based devices.
In Google Play™ search for the LG Tone & TalkTM application
and install it on your device to use this function.
* The QR code shown here helps you download the LG Tone
& TalkTM application from Google Play. Google Play is a
trademark of Google, Inc.
TM
Tone & Talk
Function Action
Current time alert Slide the FF/REW switch to the FF position for 1 second.
Read latest SMS or MMS Slide the FF/REW switch to the REW position for 1 second.
Direct dial
Favorite call
Dial using Call History
Press the CALL button twice (select Direct dial and set the
telephone number from Speed Dial menu of Tone & TalkTM).
1. Press the CALL button twice.
2. Select the name to call by sliding the FF/REW switch
for 1 second.
3. Press the CALL button twice to call (select Favorite call
and set telephone number from the Speed Dial menu of
Tone & TalkTM).
1. Press the CALL button twice.
2. Select the name to call by sliding the FF/REW switch
for 1 second.
3. Press the CALL button twice to call (select Call history
and set the telephone number from the Speed Dial menu
of Tone & TalkTM).
ENG
9
LED Indicator
Function HBS-900 Status Action
ENG
Power on The blue LED light ickers 4 times.
Power off
Pairing mode The blue LED light stays on.
Operating
Headset / hands-free
prole connected
Call connected
Charging
Charging
Charging complete
The blue LED light ickers 4 times and then
turns off.
The blue LED light ickers 1 time every 5
seconds.
The blue LED light ickers 1 time every 5
seconds.
The red LED light stays on and changes to
violet when charged 80% and above.
The blue LED light stays on.
Troubleshooting
Issue Possible problem Resolution
10
Does not
turn on
Unable to
communicate
with the LG
Bluetooth®
Headset
HBS-900
Unable to pair
the HBS-900
with the
Bluetooth®
device
Low sound
(speaker)
Check whether the battery of
the HBS-900 is fully charged.
Check whether the handset
supports the headset or
hands-free Bluetooth proles.
Check whether the battery of
the HBS-900 is low.
Check and make sure the
headset is on.
Check and make sure the
headset is placed in pairing
mode.
Check the speaker volume. lncrease the volume level.
Charge the battery.
Determine whether your
handset supports the headset
or hands-free Bluetooth proles.
Charge the battery.
Slide the Power switch to the
ON position to turn on the
headset.
With the power off, press the
CALL button and slide the
Power switch to the ON position
at the same time for 1 second
to place the headset in Manual
Pairing mode.
Precautions
Do not drop the unit from high places.
Do not modify, repair, or take apart.
Do not expose directly to water, alcohol, benzene, etc., for cleaning.
Do not expose directly to ammables.
Do not place or keep the unit near ammables.
Keep unit away from humidity & dust.
Do not place heavy objects on the unit.
Only use the headset with an original LG charger, otherwise it may be damaged.
• Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
• There is a risk of explosion if the battery is replaced by an incorrect type.
• Dispose of used batteries according to the instructions.
• The neck strap is made of a shape memory alloy. However, bending the neck strap
repeatedly is not recommended.
Declaration of Conrmation
FCC NOTICE TO USERS :
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
IMPORTANT NOTE :
To comply with the FCC RF exposure compliance requirements, no change to the
antenna or the device is permitted. Any change to the antenna or the device could result
in the device exceeding the RF exposure requirements and void user’s authority to
operate the device.
CE NOTICE TO USERS :
Hereby, LG Electronics Inc. declares that this HBS-900 is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
ENG
FCC ID: BEJHBS900
11
Additional Information
1. Radio frequency exposure
This Bluetooth® Stereo Headset HBS-900 is a radio transmitter and receiver. When in
ENG
operation, it communicates with a Bluetooth® equipped mobile device by receiving and
transmitting radio frequency (RF) electromagnetic elds (microwaves) in the frequency
range 2.4 to 2.4835 GHz.
Your Bluetooth® Headset is designed to operate in compliance with the RF exposure
guidelines and limits set by national authorities and international health agencies when
used with any compatible LG Electronics mobile phone.
2. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially explosive atmosphere.
It is rare, but your electronic device could generate sparks. Sparks in such areas could
cause an explosion or re resulting in bodily injury or even death. Areas with a potentially
explosive atmosphere are often, but not always, clearly marked.
3. Battery information
A rechargeable battery has a long service life if treated properly. A new battery or one that
has not been used for a long period of time could have reduced capacity the rst few times
it is used. Do not expose the battery to extreme temperatures, never above +60°(+140°F)
or below -20°(-4°F). For maximum battery capacity, use the battery in room temperature.
If the battery is used in low temperatures, the battery capacity will be reduced. The battery
can only be charged in temperatures between +10°(+50°F) and +45°(+113°F). For your
safety, do not remove the battery incorperated with the product.
If you need to replace the battery, take it to the nearest authorised LG Electronics service
point or dealer for assistance.
4. Recycling the battery in your Bluetooth® Headset
The battery in your Bluetooth® Headset must be disposed of properly and should never
be placed in municipal waste. The LG Electronics service partner removing battery will
dispose of it according to local regulations.
12
Additional Information
5. Conditions
- The warranty is valid only if the original receipt issued to the original purchaser by the
dealer, specifying the date of purchase and serial number, is presented with the product
to be repaired or replaced. LG Electronics reserves the right to refuse warranty service if
this information has been removed or changed after the original purchase of the product
from the dealer.
- If LG Electronics repairs or replaces the product, the repaired or replaced product
shall be warranted for the remaining time of the original warranty period or for ninety
(90) days from the date of repair, whichever is longer. Repair or replacement may
involve the use of functionally equivalent reconditioned units. Replaced parts or
components will become the property of LG Electronics.
- This Warranty does not cover any failure of the product due to normal wear and
tear, or due to misuse, including but not limited to use in other than the normal and
customary manner, in accordance with instructions for use and maintenance of the
product. Nor does this warranty cover any failure of the product due to accident,
modication or adjustment, acts of God or damage resulting from liquid.
- This warranty does not cover product failures due to improper repair installations,
modications or service performed by a non-LG Electronics authorized person.
Tampering with any of the seals on the product will void the warranty.
Limited Warranty
SUBJECT TO THE CONDITIONS OF THIS LIMITED WARRANTY, LG
ELECTRONICS WARRANTS THIS PRODUCT TO BE FREE FROM DEFECTS
IN DESIGN, MATERIAL AND WORKMANSHIP AT THE TIME OF ITS ORIGINAL
PURCHASE BY A CONSUMER, AND FOR A SUBSEQUENT PERIOD OF ONE
(1) YEAR. SHOULD YOUR PRODUCT NEED WARRANTY SERVICE, PLEASE
RETURN IT TO THE DEALER FROM WHOM IT WAS PURCHASED OR CONTACT
YOUR LOCAL LG ELECTRONICS CONTACT CENTER TO GET FURTHER
INFORMATION.
ENG
13
Important safety information
Avoiding hearing damage
Permanent hearing loss may occur if you use your Handsfree car kit at a high
ENG
volume. Set the volume to a safe level. You can adapt over time to a higher volume of
sound that may sound normal but can be damaging to your hearing.
If you experience ringing in your ears or mufed speech, stop listening and have your
hearing checked. The louder the volume, the less time is required before your hearing
could be affected. Hearing experts suggest that to protect your hearing:
• Limit the amount of time you use Headset at high volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking near you.
Please refer to your handset user guide for more information on how to adjust
listening levels on your handset.
Using headsets safely
Use of Headset to listen to music while operating a vehicle is not recommended and
is illegal in some areas. Be careful and attentive while driving. Stop using this device
if you nd it disruptive or distracting while operating any type of vehicle or performing
any other activity that requires your full attention.
14
Loading...