LG HBS-900 User guide [ru]

LG Electronics

OFF

HBS-900 User Manual

Bluetooth® Stereo Headset

English

Рyccкий

Қазақша Українська

Rev 1.0 RU

www.lg.com

HBS-900 User Manual

OFF

Bluetooth® Stereo Headset

Any modications or changes to this manual due to

typographical errors or inaccuracies of stated information

English

LG Electronics Inc., 2014

Note: For the best performance and

to prevent any damage to, or misuse of the HBS-900, please read all of the information

carefully prior to using the HBS-900.

shall only be made by LG Electronics Inc.

Description of parts

OFF

ENG

Charging Port

FF/REW Switch

PLAY/PAUSE/STOP

Button

Earbud (R)

LED Indicator

Earbud Wire

Retraction Button

CALL Button

Microphone

Earbud (L)

VOLUME Switch (+/-)

Package Contents

Earbuds (2 Sets)

USB Charging Cable WEEE Card

User Manual

Specications

Bluetooth® specication

Battery Standby time / Talk Time Up to 550 hours / Up to 17 hours Music play time Up to 14 hours

Charging time Less than 2 hours Charging rated input DC 4.75 V ~ 5.6 V, 400 mA Operation temperature -10°C ~ 60°C Dimension / weight 155 mm (W) x 178 mm (L) x 15 mm (H)/54 g

Item Description

3.0 (Headset / Hands-Free / A2DP Proles) Battery 3.7 V / 220 mAh Li-Polymer

Power Switch

Earbud Wire

Retraction Button

(Europe Only)

OFF

How to Use

Power On / Power Off

- Slide the Power switch to the ON or OFF position.

Charging

- When the charger is connected (with the power on or off) the headset will turn off.

- While charging, the LED indicator will show a solid red light and then change to

violet when charged 80% and above.

- When charging is completed, the LED indicator will show a solid blue light.

Low Battery

- An announcement will be made once every 2 minutes.

- If the battery is not charged, the headset will turn off.

Battery Status Alert

- Slide the VOLUME switch to the - position for 1 second.

- There are 3 levels of battery power.

Battery Status High Medium Low

Voice Prompt Battery High Battery Medium Battery Low

LED Indicator

- The HBS-900 battery status indicator will appear on the iPhone screen.

Retractable Earbud Wire

- By pulling the left or right earbuds, the earbud wires can be extended.

- Pressing the Earbud Wire Retraction button winds the earbud wire automatically.

Blinking

Blue

3 times

Blinking

Violet

3 times

Blinking

Red

3 times

ENG

How to Use

Pairing

ENG

- Before using the headset for the rst time, you must pair it with a Bluetooth-enabled

handset.

- To pair your headset with an additional handset, the headset must be placed in

Pairing Mode.

- There are 2 Pairing Mode Methods with the HBS-900.

Easy Pairing (First Time Pairing)

1. Slide the Power switch to the ON position to turn on the HBS-900. When the headset enters Pairing Mode, the LED indicator will show a solid blue light.

2. Using your handset, nd the Bluetooth Menu and search for or add new devices.

• Select LG HBS900 from the list of devices and pair it with your handset.

3. If asked for the Pass/PIN code please enter 0000 (4 Zeros).

* Note : If your handset supports Secure Simple Pairing (SSP), you will not need to

enter Pass/PIN code.

• Once pairing has completed successfully, you will hear “Your headset paired.”

• The HBS-900 will automatically turn off if not paired within 3 minutes.

Manual Pairing (Pairing with another phone or re-pairing)

• With the power off, press the CALL button and slide the Power switch to the ON

position at the same time for 2 seconds.

• When the headset enters Pairing Mode, the LED indicator will show a solid blue light. After the procedure repeat Easy Pairing steps 2 through 3.

How to Use

Multi-connection

Advanced Multipoint

The HBS-900 is capable of having two devices connected to the headset at the same time. This will give you the freedom of using call waiting between calls on both of your connected phones.

Connection

- Pair the headset with one of your Bluetooth-enabled handsets (see the pairing

instructions on page 2).

- Turn off the headset.

- With the power off, press the CALL button and slide the Power switch to the ON position at the same time for 2 seconds to enter Manual Pairing mode.

- Pair and connect the headset with your other Bluetooth-enabled handset. (this will be your primary handset).

- Once this handset is paired and connected, go back and connect the originally paired handset to the headset. This will now be your secondary handset.

* NOTE: When the HBS-900 is connected to two handsets at the same time

(Multipoint), the headset calling functions will work with the primary handset.

* NOTE: In case of failure to connect to the primary phone through Easy Pairing,

HBS-900 will enter pairing mode.

Calling Function

- Voice Dialing and Last Number Redial features work with the primary handset (or

handset which made the last outgoing call).

Call Waiting

- While speaking on an active call, press the CALL button for 1 second to switch

to an incoming call.

- To switch between 2 active calls, press the CALL button for 1 second.

- To terminate the active call or both calls at once, briey press the CALL button.

- If both handsets are receiving an incoming call, the headset will default to the

primary device.

ENG

How to Use

Auto Reconnect

ENG

- If the HBS-900 is turned off (either accidentally or intentionally) while connected to a handset, the headset and handset will disconnect. The headset and handset will automatically reconnect when the HBS-900 is turned back on while in range.

- The secondary handset need to be connected via selecting LG HBS900 from the

list of devices at Bluetooth menu.

Out of range

- If the paired devices are separated by a range of 10 meters(33 feet) or more, the

headset and handset will disconnect and HBS-900 will vibrate to alert.

* If vibrate is set to off by sliding the VOLUME switch to the + position and hold for

2 seconds, HBS-900 will not vibrate.

- If the headset and handset do not automatically reconnect when they are back within the required range, briey press the CALL button on the HBS-900 to reconnect manually.

* It is possible to use these functions only when your handset supports them. For

further information about using these features, please consult your handset’s

user manual.

- While in multi-connection and streaming, the inactive paired device, which is

out of range, will be disconnected. The HBS-900 will alert once with no attempt

to reconnect.

Calling

Answering a call / Ending a call

- When there is an incoming call, the headset will ring and vibrate.

* HBS-900 will not vibrate if vibration function is on ‘off’.

- Briey slide the VOLUME switch to the - position to stop the vibration.

- Briey press the CALL button.

Transferring a call

- While on a call on your handset, press the PLAY/PAUSE/STOP button twice

on the HBS-900 to transfer the audio either from headset to handset or from handset to headset.

How to Use

Voice dialing

- Briey press the CALL button to activate Voice Command. Note: If the handset does not support Voice Dialing, it is possible that performing

this action will activate Last Number Redial.

Last number redial

- Press and hold the CALL button for 1second to activate Last Number Redial.

The headset will beep, and call the last number dialed.

Call waiting

- Answer a second call without hanging up the rst call by pressing the CALL

button for 1 second (you will hear a beep). Press the CALL button for 1second to

turn to the original call.

- Briey press the CALL button to terminate the active call or both calls at once. (subject to handset’s support)

Rejecting a Call

- Press the CALL button for 2 seconds when the handset rings.

Mic Mute

- Slide the VOLUME switch to the + position and the FF/REW switch to the

REW position at the same time for 1 second to mute/unmute the Mic during conversation.

* Precaution : For your safety, do not operate microphone mute during driving.

Volume control

- Slide the VOLUME switch to the + or - position.

Audio streaming controls

- PLAY : Briey press the PLAY/PAUSE button.

- PAUSE : Briey press the PLAY/PAUSE button.

- STOP : Press and hold the PLAY/PAUSE button.

- NEXT SONG : Briey slide the FF/REW switch to the FF position.

- PREVIOUS SONG : Briey slide the FF/REW switch to the REW position.

- FAST FORWARD : Slide and hold the FF/REW switch to the FF position.

- REWIND : Slide and hold the FF/REW switch to the REW position.

ENG

How to Use

Equalizer

ENG

- While playing music, press the PLAY/PAUSE/STOP button twice to switch between Bass Boost (default), Normal, and Treble Boost.

- The bass coming from the speakers can vary as a result of the size of the ear gel

that is being used.

aptX

- The HBS-900 features aptX® technology that ensures audio content transmitted via

Bluetooth is instant and crystal-clear.

- aptX® is automatically enabled as long as the source device supports it.

Vibrate Control

- To activate or deactivate the Vibrate function, slide the VOLUME switch to the +

position for 2 seconds. You will hear “Vibrate on” or “Vibrate off” when it is activated

or deactivated.

- When the HBS-900 is set to vibrate off, the headset will not vibrate when receiving an incoming call or when it is out of range.

- By powering the unit off and then powering the unit back on, the vibration functionality

will be activated.

How to Use

SMS Reader

The HBS-900 Bluetooth headset supports SMS reading on AndroidTM based devices.

In Google Play™ search for the LG Tone & TalkTM application and install it on your device to use this function. * The QR code shown here helps you download the LG Tone

& TalkTM application from Google Play. Google Play is a trademark of Google, Inc.

Tone & Talk

Function Action

Current time alert Slide the FF/REW switch to the FF position for 1 second.

Read latest SMS or MMS Slide the FF/REW switch to the REW position for 1 second.

Direct dial

Favorite call

Dial using Call History

Press the CALL button twice (select Direct dial and set the

telephone number from Speed Dial menu of Tone & TalkTM).

1. Press the CALL button twice.

2. Select the name to call by sliding the FF/REW switch

for 1 second.

3. Press the CALL button twice to call (select Favorite call and set telephone number from the Speed Dial menu of

Tone & TalkTM).

1. Press the CALL button twice.

2. Select the name to call by sliding the FF/REW switch

for 1 second.

3. Press the CALL button twice to call (select Call history

and set the telephone number from the Speed Dial menu

of Tone & TalkTM).

ENG

LED Indicator

Function HBS-900 Status Action

ENG

Power on The blue LED light ickers 4 times.

Power off

Pairing mode The blue LED light stays on.

Operating

Headset / hands-free

prole connected

Call connected

Charging

Charging complete

The blue LED light ickers 4 times and then

turns off.

The blue LED light ickers 1 time every 5

seconds.

The blue LED light ickers 1 time every 5

seconds.

The red LED light stays on and changes to violet when charged 80% and above.

The blue LED light stays on.

Troubleshooting

Issue Possible problem Resolution

Does not turn on

Unable to communicate with the LG

Bluetooth®

Headset HBS-900

Unable to pair the HBS-900 with the

Bluetooth®

device

Low sound

(speaker)

Check whether the battery of the HBS-900 is fully charged.

Check whether the handset

supports the headset or hands-free Bluetooth proles.

Check whether the battery of

the HBS-900 is low.

Check and make sure the

headset is on.

Check and make sure the

headset is placed in pairing mode.

Check the speaker volume. lncrease the volume level.

Charge the battery.

Determine whether your

handset supports the headset or hands-free Bluetooth proles.

Charge the battery.

Slide the Power switch to the ON position to turn on the headset.

With the power off, press the CALL button and slide the Power switch to the ON position at the same time for 1 second to place the headset in Manual Pairing mode.

Precautions

Do not drop the unit from high places.

Do not modify, repair, or take apart. Do not expose directly to water, alcohol, benzene, etc., for cleaning. Do not expose directly to ammables. Do not place or keep the unit near ammables. Keep unit away from humidity & dust. Do not place heavy objects on the unit. Only use the headset with an original LG charger, otherwise it may be damaged.

• Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• There is a risk of explosion if the battery is replaced by an incorrect type.

• Dispose of used batteries according to the instructions.

• The neck strap is made of a shape memory alloy. However, bending the neck strap repeatedly is not recommended.

Declaration of Conrmation

FCC NOTICE TO USERS :

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may

cause undesired operation.

IMPORTANT NOTE :

To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to

operate the device.

CE NOTICE TO USERS :

Hereby, LG Electronics Inc. declares that this HBS-900 is in

compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

ENG

FCC ID: BEJHBS900

Additional Information

1. Radio frequency exposure

This Bluetooth® Stereo Headset HBS-900 is a radio transmitter and receiver. When in

ENG

operation, it communicates with a Bluetooth® equipped mobile device by receiving and

transmitting radio frequency (RF) electromagnetic elds (microwaves) in the frequency range 2.4 to 2.4835 GHz.

Your Bluetooth® Headset is designed to operate in compliance with the RF exposure

guidelines and limits set by national authorities and international health agencies when used with any compatible LG Electronics mobile phone.

2. Potentially explosive atmosphere

Turn off your electronic device when in any area with a potentially explosive atmosphere. It is rare, but your electronic device could generate sparks. Sparks in such areas could cause an explosion or re resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked.

3. Battery information

A rechargeable battery has a long service life if treated properly. A new battery or one that has not been used for a long period of time could have reduced capacity the rst few times it is used. Do not expose the battery to extreme temperatures, never above +60°(+140°F) or below -20°(-4°F). For maximum battery capacity, use the battery in room temperature. If the battery is used in low temperatures, the battery capacity will be reduced. The battery can only be charged in temperatures between +10°(+50°F) and +45°(+113°F). For your safety, do not remove the battery incorperated with the product. If you need to replace the battery, take it to the nearest authorised LG Electronics service

point or dealer for assistance.

4. Recycling the battery in your Bluetooth® Headset

The battery in your Bluetooth® Headset must be disposed of properly and should never be placed in municipal waste. The LG Electronics service partner removing battery will

dispose of it according to local regulations.

Disposal of waste batteries/accumulators 1 This symbol may be combined with chemical symbols for mercury (Hg), cadmium

(Cd) or lead (Pb) if the battery contains more than 0.0005% of mercury, 0.002% of cadmium or 0.004% of lead.

2 All batteries/accumulators should be disposed separately from the municipal waste

stream via designated collection facilities appointed by the government or the local

authorities.

3 The correct disposal of your old batteries/accumulators will help to prevent potential

negative consequences for the environment, animal and human health.

4 For more detailed information about disposal of your old batteries/accumulators,

please contact your city office, waste disposal service or the shop where you

purchased the product.

Additional Information

5. Conditions

- The warranty is valid only if the original receipt issued to the original purchaser by the dealer, specifying the date of purchase and serial number, is presented with the product to be repaired or replaced. LG Electronics reserves the right to refuse warranty service if

this information has been removed or changed after the original purchase of the product from the dealer.

- If LG Electronics repairs or replaces the product, the repaired or replaced product

shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. Repair or replacement may involve the use of functionally equivalent reconditioned units. Replaced parts or components will become the property of LG Electronics.

- This Warranty does not cover any failure of the product due to normal wear and

tear, or due to misuse, including but not limited to use in other than the normal and

customary manner, in accordance with instructions for use and maintenance of the product. Nor does this warranty cover any failure of the product due to accident, modication or adjustment, acts of God or damage resulting from liquid.

- This warranty does not cover product failures due to improper repair installations, modications or service performed by a non-LG Electronics authorized person. Tampering with any of the seals on the product will void the warranty.

Limited Warranty

SUBJECT TO THE CONDITIONS OF THIS LIMITED WARRANTY, LG ELECTRONICS WARRANTS THIS PRODUCT TO BE FREE FROM DEFECTS IN DESIGN, MATERIAL AND WORKMANSHIP AT THE TIME OF ITS ORIGINAL PURCHASE BY A CONSUMER, AND FOR A SUBSEQUENT PERIOD OF ONE (1) YEAR. SHOULD YOUR PRODUCT NEED WARRANTY SERVICE, PLEASE RETURN IT TO THE DEALER FROM WHOM IT WAS PURCHASED OR CONTACT YOUR LOCAL LG ELECTRONICS CONTACT CENTER TO GET FURTHER INFORMATION.

ENG

Important safety information

Avoiding hearing damage

Permanent hearing loss may occur if you use your Handsfree car kit at a high

ENG

volume. Set the volume to a safe level. You can adapt over time to a higher volume of

sound that may sound normal but can be damaging to your hearing. If you experience ringing in your ears or mufed speech, stop listening and have your hearing checked. The louder the volume, the less time is required before your hearing could be affected. Hearing experts suggest that to protect your hearing:

• Limit the amount of time you use Headset at high volume.

• Avoid turning up the volume to block out noisy surroundings.

• Turn the volume down if you can’t hear people speaking near you. Please refer to your handset user guide for more information on how to adjust listening levels on your handset.

Using headsets safely

Use of Headset to listen to music while operating a vehicle is not recommended and is illegal in some areas. Be careful and attentive while driving. Stop using this device

if you nd it disruptive or distracting while operating any type of vehicle or performing any other activity that requires your full attention.

Русский

OFF

HBS-900 Руководство пользователя

Стереогарнитура Bluetooth

Примечание. Для наилучшего качества работы,

а также предотвращения любых повреждений или неправильного использования HBS-900, внимательно прочитайте информацию по использованию HBS-900.

Любые изменения и исправления типографских ошибок или

неточной информации в данном руководстве могут быть

LG Electronics Inc., 2014

внесены только LG Electronics Inc.

Описание деталей

OFF

РУС

Переключатель перемотки вперед/ назад

Кнопка ВОСПРОИЗВЕДЕНИЯ/ ПАУЗЫ/ОСТАНОВКИ

Комплектация упаковки

Наушники-вкладыши

(2 набора)

Разъем для подключения зарядного устройства

Световой индикатор

Наушник-вкладыш (П)

Переключатель ГРОМКОСТИ (+/-)

Зарядный кабель USB

Кнопка автосматывания

провода наушника

Кнопка ВЫЗОВА

Микрофон

Наушник-

вкладыш (Л)

Руководство

пользователя

Характеристики

Элемент Описание

Технические характеристики Bluetooth®3.0 (профили: наушники / гарнитура / A2DP) Аккумулятор Аккумулятор 3,7 В / 220 мАч, литий-полимерный Режим ожидания / Режим разговора До 550 часов / до 17 часов Время воспроизведения музыки До 14 часов Время зарядки Менее 2 часов Номинальное потребление при зарядке 4,75 ~ 5,6 В пост. тока, 400 мА Рабочий диапазон температур От -10 °C до 60 °C Размер / вес 155 мм (Ш) x 178 мм (Д) x 15 мм (В)/54 г

Переключатель питания

Кнопка автосматывания

провода наушника

(только для Европы)

Карта WEEE

OFF

Порядок использования

Включение / выключение питания

- Сдвиньте переключатель питания в положение ВКЛ. или ВЫКЛ.

Зарядка

- При подсоединении зарядного устройства (с включенным или выключенным питанием) гарнитура отключается.

- Во время зарядки светодиодный индикатор горит красным цветом и меняется на фиолетовый, когда уровень заряда аккумулятора достигает 80% и более.

- По завершении зарядки светодиодный индикатор загорается синим светом.

Низкий заряд аккумулятора

- Каждые 2 минуты подается сигнал о низком уровне заряда аккумулятора.

- Если аккумулятор не заряжен, гарнитура автоматически выключается.

Проверка уровня заряда аккумулятора

- Сдвиньте переключатель ГРОМКОСТИ в положение "-" на 1 секунду.

- Существует три уровня заряда аккумулятора.

Уровень заряда

аккумулятора

Световой

индикатор

- Индикатор состояния заряда аккумулятора стереогарнитуры HBS-900 появится на экране телефона.

Сматываемый провод наушника

- Потяните левый или правый наушник, чтобы удлинить провод.

- Нажмите кнопку автосматывания провода наушника для автоматического возврата провода.

Высокий Средний Низкий

Мигает

Синий 3 раза

Мигает

Фиолетовый

3 раза

Мигает

Красный

3 раза

РУС

+ 43 hidden pages

LG HBS-900 User guide [ru]

Specifications and Main Features

Frequently Asked Questions

User Manual