User’s Guide
LG TONE Ultra™
Bluetooth® Wireless Stereo Headset
English
All rights reserved. LG Electronics Inc., 2016
NOTE: For the best performance and to prevent any damage to, or misuse of the HBS-820S, please read all of the information carefully prior to using the HBS-820S.
"OZ NPEJŻDBUJPOT PS DIBOHFT UP UIJT NBOVBM EVF UP UZQPHSBQIJDBM FSSPST PS JOBDDVSBDJFT PG stated information shall only be made by LG Electronics Inc.
HBS-820S |
www.lg.com |
ENG
The LG TONE Ultra (HBS-820S) is a lightweight wireless headset that uses Bluetooth technology.
This product can be used as an audio accessory for devices supporting either the A2DP or Hands-Free Bluetooth 1SPŻMF
Safety Cautions
! CAUTION
Do not disassemble, adjust, or repair the product arbitrarily.
%P OPU QMBDF UIF QSPEVDU OFBS FYDFTTJWF IFBU PS żBNNBCMF NBUFSJBM
Do not arbitrarily replace the battery as it may explode.
The product may be damaged if an incompatible recharger is used.
Make sure that any infant or child does not swallow a magnet or a small component of the product.
Make sure that foreign objects do not enter the charger’s connectors (charging port and power
QMVH 'BJMJOH UP EP TP NBZ SFTVMU JO ŻSF PS FMFDUSJD TIPDL
For your safety, do not wear the product while it is being charged.
If you have a medical device implanted, contact your doctor before use. Do not pull the earphone cable with excessive force.
For your safety, do not remove the battery incorporated in the product. Lithium-ion polymer Battery is hazardous component which can cause injury.
#BUUFSZ SFQMBDFNFOU CZ OPO RVBMJŻFE QSPGFTTJPOBM DBO DBVTF EBNBHF UP ZPVS EFWJDF
The battery should be recycled or disposed of separately from household waste.
! WARNING
Do not drop the product from a high place.
Make sure there is no water, alcohol, or benzene in contact with the product.
Do not store the product in a wet or dusty place.
Do not place any heavy objects on the product.
Product is sweat and water resistant.
It is not waterproof and should not be submerged in water.
NOTE
If the product is exposed to excessive sweat, clean the product. Keep the earbud of the earphone always clean.
HD Speaker
If the communication network of the device you are connecting to supports HD Voice Calling, you
DBO FOKPZ NBLJOH WPJDF DBMMT BOE MJTUFOJOH UP NVTJD JO IJHI EFŻOJUJPO
Qualcomm® AptX™
LG HBS-820S is powered by Qualcomm aptX audio. Qualcomm aptX audio is Bluetooth wireless technology that provides clearer audio for listening to music and watching movies.
Qualcomm aptX audio is automatically enabled when a mobile phone or audio device supports it.
Product Components
ENG
TONE Ultra HBS-820S |
Extra Ear Gels |
Micro USB Charging Cable |
|||
(Medium ear gels & standard size |
(small & large) |
|
|||
stabilizer tips installed) |
|
|
|
|
|
User’sGuide |
|
|
|
|
|
|
|
|
|
|
|
LGTONEUltra |
|
|
|
|
|
|
|
|
|
|
|
User’s Guide |
Warranty Card |
WEEE Card |
|||
|
|
|
|
|
(Europe Only) |
NOTE: Actual product design may differ from images shown in manual.
3
ENG
! CAUTION
Make sure authentic LG Electronics components are used. Using a non-authentic component may damage the product and thus void the warranty.
Product Description
Power switch |
|
Indicator lamp |
|
Charging port |
|
|
ON |
OFF |
|
|
Volume jog |
|
|
switch |
|
|
Microphone |
Speaker/ |
Speaker |
|
Earphones |
|
Call button |
mode switch |
|
|
|
|
|
Previous/Next |
|
|
jog switch |
|
|
Play/Pause/Stop button |
|
Earbuds (left/right) |
NOTE: When you control the volume (level 15), you will hear a control sound two times or as a long sound from volume level 10 and higher.
4
Battery Charging and Alerts
Open the Charging port cover and connect the charger to the Charging port.
Indicator Lamp |
Red |
Purple |
Blue |
Battery Status |
Charging |
80% |
Completed |
Slide and hold the Volume jog switch in the volume down (-) direction for 1 second to check the Indicator lamp and battery level by voice.
Battery Status |
4VGŻDJFOU |
Normal |
*OTVGŻDJFOU |
|
|
|
|
Indicator Lamp |
#MVF żBTIFT UISFF UJNFT |
1VSQMF żBTIFT UISFF UJNFT |
3FE żBTIFT UISFF UJNFT |
|
|
|
|
HBS-820S Pairing and Connecting
If you start the process after putting in your earbuds, you can easily pair and connect following the voice prompts.
*G ZPV IFBS UIBU UIF CBUUFSZ JT JOTVGŻDJFOU SFDIBSHF UIF CBUUFSZ CFGPSF proceeding with pairing.
If pairing is not completed within 3 minutes, the power automatically turns off.
When the power automatically turns off, slide the Power switch from the OFF to the ON position to turn the power on.
Connecting Quickly
|
|
|
|
MAKE PHONE VISIBLE |
ON |
OFF |
ON |
OFF |
Phone |
|
|
|
|
Allow other Bluetooth devices to find |
|
|
|
|
my phone |
AVAILABLE DEVICES
|
|
|
LG HBS820S |
ON |
OFF |
ON |
OFF |
Search for devices
ENG
5
|
1 |
Slide the Power switch toward the ON position to turn on the power. |
|
|
2 |
The blue Indicator lamp turns on and the HBS-820S switches to Search mode. |
|
|
3 |
From the mobile phone or device list, select LG HBS820S to connect. |
|
ENG |
4 |
A voice message will indicate that the connection is completed. |
|
5 |
Use the same process to pair the HBS-820S with other devices. |
||
|
Connecting Manually
1Press and hold the Call button and slide the Power switch to the ON position to turn it on.
2The blue Indicator lamp turns on and the HBS-820S switches to Search mode.
3Select LG HBS820S from the device list to connect.
Multiple Connections
The HBS-820S can be connected to a mobile phone and a PC simultaneously.
The HBS-820S can be connected to an additional device while it is already connected to a device.
1Press and hold the Call button and slide the Power switch to the ON position to turn it on.
2The blue Indicator lamp turns on and the HBS-820S switches to Search mode.
3From the mobile phone or device list, select LG HBS820S to connect.
4A voice message will indicate that the connection is completed. This device becomes the “Main Connected Device.”
5Try to connect to HBS-4using a previously connected device. This device becomes the “Sub Connected Device.”
NOTE: If simultaneously connected to two devices, the device that was connected most recently is the “Main Connected Device.” The main functions work based on the “Main Connected Device.”
Automatic Reconnection
If you turn on HBS-820S, it will automatically connect to the most recent (main or peripheral) device it was connected to. (If a device cannot be found, Search mode will be activated.)
If the product does not automatically connect to the device you want, Search for your product on the device you want to connect to and connect it manually.
6