LG HBS-810 Owner's Manual

Anatel: 4069-15-1003

(01) 07893299905780

HBS-810 User Manual

Bluetooth® Stereo Headset

Rev 2.0 SCA

English Español Portuguese

HBS-810 User Manual

Bluetooth® Stereo Headset

Note: Please read all information carefully prior to using the HBS-810 in order to prevent product damage and to enjoy the best performance.

Any modications or changes to this manual due to typographical errors or

inaccuracies of stated information shall only be made by LG Electronics Inc.

English

Table of Contents

Introduction 3

ENG

- Included in the Package 3

Description of Parts 4 How to Use 5

- Power On/Power Off 5

- Charging 5

- Low Battery 5

- Battery Status Alert 5

- Retractable Earbuds 6

- Pairing 6

- Advanced Multipoint 7

- Auto Reconnect 8

- Calling 9

• Answering a Call 9

• Transferring a Call 9

• Voice Dialing 9

• Last Number Redial 9

• Ending a Call 9

• Call Waiting 10

• Rejecting a Call 10

• Microphone Mute 10

- Volume Control 10

- Vibration Control 11

- Audio Streaming 11

- Equalizer 12

- aptX® 12

- Tone & TalkTM 12 Summary of Button Functions 14 LED Indicator 16 Troubleshooting 17 Specifications 18 Precautions 19 Declaration of Confirmation 20 Additional Information 22 Limited Warranty 26

(Except Mexico and Argentina)

Important Safety Information 27

Introduction

The LG TONE ULTRATM (HBS-810) is a lightweight wireless headset that uses Bluetooth®

technology.

This product can be used as an audio accessory for devices supporting either the A2DP or hands-free Bluetooth prole.

Included in the Package

Extra Ear Gels

(1 Set - Small)

HBS-810

(Medium ear gels installed)

*Actual product design may differ from images shown in this manual.

*USB Charging

Cable

User Manual Warranty Card

(Argentina only)

ENG

Description of Parts

Headset

ENG

FF/REW Jog Button PLAY/PAUSE/STOP Button

Charging Port

LED Indicator

Earbud (R)

CALL Button Microphone

Earbud (L)

VOLUME Jog Button (+/-)

Power Switch

Power On/Power Off

- Slide the Power switch to the ON or

OFF position.

Charging

- When the charger is connected (with

the power on or off) the headset will power off.

- While charging, the LED indicator will show a solid red light. When charged 80% or more, the indicator will show a

violet light.

- When the device is fully charged, the

LED indicator will show a solid blue light.

Low Battery

- A low battery alert will play once every

2 minutes.

- If the battery is not charged, the headset

will power off.

How to Use

Battery Status Alert

- Slide the VOLUME jog button to the “-” position for 1 second to check the battery

status of the headset.

Battery

High Medium

Status

Voice

Battery

Prompt

High

LED

Blinking

Indicator

Blue

NOTE: When paired, some mobile devices may display the headset’s battery level at

the top of the screen.

Battery

Medium

Blinking

Violet

Low

Battery

Low

Blinking

Red

ENG

How to Use

Retractable Earbuds

ENG

- Pull the earbuds to extend them to the

desired length.

- To retract the earbuds, pull the cords out slightly, and they will automatically retract

into place.

- If the earbuds do not retract, pull the earbuds out completely to retract them.

Pairing

Before using the headset for the rst time, you must pair it with a Bluetooth-enabled

device.

1) Easy Pairing

1. Slide the Power switch to the ON

position.

2. If it is your rst time pairing the

device or it does not detect a

previously paired device, it will enter Pairing mode. The LED

indicator will be solid blue.

3. Make sure the device you wish to pair with is discoverable. Under the Bluetooth menu, search for or add new devices.

4. Select LG HBS810 from the list

of devices.

5. If asked for a Pass/Pin Code, enter 0000 (4 zeros).

6. Once the devices are paired, you will hear “Your headset paired.” If a connection has been made, a

vibrating alert is generated.

NOTE: The headset will automatically power off if not paired within 3 minutes.

2) Manual Pairing (pairing with another phone or re-pairing)

1. With the power off, press the CALL

button and slide the Power switch

to the ON position at the same time for 2 seconds.

2. When the headset enters Pairing mode, the LED indicator will show

a solid blue light. Repeat Easy Pairing steps 3 through 6.

Advanced Multipoint

The headset can be connected to two devices at the same time. This will give you the freedom to use call waiting

between calls on both of your connected phones.

Pairing with Two Devices

- First, pair the headset with the Bluetooth- enabled mobile device you want to use

as your secondary device (see Pairing instructions).

- Once paired, power off the headset.

- With the power off, press the CALL

button and slide the Power switch to

the ON position at the same time for 2 seconds to enter Manual Pairing mode.

How to Use

- Pair and connect the headset with your

other Bluetooth-enabled mobile device.

This will be your primary device.

- Once the primary mobile device is paired and connected with the headset,

reconnect the headset to the initially

paired mobile device.

NOTE: If a connection has been made, a

vibrating alert is generated.

NOTE: When the headset is connected to two mobile devices at the same time (Multipoint), the headset calling functions will work with the primary mobile device.

NOTE: If the headset fails to connect to the primary phone through Easy Pairing, it will enter Pairing mode.

Calling

- Voice Dialing and Last Number Redial features work with the primary mobile device (or the mobile device that made

the last outgoing call).

ENG

How to Use

Call Waiting

ENG

- While on a call, press the CALL button for 1 second to answer an incoming call.

- To switch between two active calls, press the CALL button for 1 second.

- To end both calls, briey press the

CALL button.

- If both paired mobile devices are receiving an incoming call, the headset will default to the primary device.

Auto Reconnect

- If in range of each other when the

headset is powered on, the headset and the primary mobile device will automatically reconnect.

- The secondary mobile device will need to be manually connected. Select LG HBS810 from the list of devices in the Bluetooth menu and pair.

NOTE: If a connection has been made, a

vibrating alert is generated.

Out of Range

- If the paired devices are separated by

a range of 33 feet (10 meters) or more, the headset and mobile device will disconnect, and the headset will vibrate

to alert you.

NOTE: To power off device vibration, slide the VOLUME jog button to the “+” position and hold for 2 seconds.

- If the headset and mobile device do not automatically reconnect when they are back within the required range, briey

press the CALL button on the headset to

manually reconnect.

- While in multi-connection and streaming,

the inactive paired device will be

disconnected when out of range. The

headset will alert you once with no

attempt to reconnect.

Calling

Answering a Call

- When receiving an incoming call, the

headset will ring and vibrate.

- Briey slide the VOLUME jog button to the “-” position to stop the vibration.

NOTE: The headset will not vibrate if

vibration has been deactivated.

- Briey press the CALL button to answer the incoming call.

Transferring a Call

- You can manually transfer the call to or from the headset by pressing the PLAY/PAUSE/STOP button twice on the headset (mobile device and headset must be paired).

How to Use

Voice Dialing

- Briey press the CALL button to activate Voice Command. For best results,

record the voice dialing tag through your headset.

NOTE: If your mobile device does not support voice dialing, this action may activate Last Number Redial.

Last Number Redial

- Press and hold the CALL button for 1 second to activate Last Number Redial. The headset will beep and then call the last number dialed.

Ending a Call

- Briey press the CALL button.

ENG

How to Use

Call Waiting

ENG

- Answer a second call without hanging up

the rst call by pressing the CALL button for 1 second. Press the CALL button for 1 second to return to the rst call.

- Briey press the CALL button to end

both calls.

Rejecting a Call

- Activate Call Reject by pressing the CALL button for 2 seconds when the mobile

device rings.

NOTE: These functions may not be available on all mobile devices. For further information about using these features, please consult your mobile device’s user manual.

Microphone Mute

- Slide the VOLUME jog button to the “+” position and the FF/REW jog button to the REW position at the same time for 1 second to mute/unmute the microphone

during conversation.

Caution: For your safety, do not use this

function while driving.

Volume Control

- Slide the VOLUME jog button to the “+” or “-” position to adjust the speaker volume.

Caution: Listening to music for long periods of time at high volume levels may cause hearing damage or loss. To prevent this, the headset will emit a warning beep when you are using the upper 6 volume

levels.

Vibration Control

- To activate or deactivate the device vibration, slide the VOLUME jog button to the “+” position for 2 seconds. You will hear “Vibrate on” or “Vibrate off” when it

is activated or deactivated.

- When vibration is deactivated, the

headset will not vibrate when receiving

an incoming call or when it is out of range of a paired mobile device.

- Vibration will automatically be reactivated

when the device is powered on.

NOTE: When pairing the headset with a mobile device, the headset will vibrate when pairing is complete, even if the

vibration function is deactivated.

Audio Streaming

Play

- Briey press the PLAY/PAUSE/STOP

button.

How to Use

Pause

- While playing music, briey press the PLAY/PAUSE/STOP button.

Stop

- While playing music, press and hold the PLAY/PAUSE/STOP button for 1 second.

Next song

- Briey slide the FF/REW jog button to the FF position.

Previous song

- Briey slide the FF/REW jog button to the REW position.

Fast Forward

- Slide and hold the FF/REW jog button to the FF position.

Rewind

- Slide and hold the FF/REW jog button to the REW position.

ENG

How to Use

Equalizer

ENG

- While playing music, press the PLAY/ PAUSE/STOP button twice to switch between Bass Boost (default), Normal, and Treble Boost.

NOTE: The size of the ear gel can affect

the amount of bass you hear.

aptX

- The headset features aptX technology that ensures audio content transmitted

via Bluetooth is seamless and crystal clear.

- aptX is automatically enabled as long as

the source device supports it.

Tone & Talk

The HBS-810 Bluetooth headset supports SMS reading on AndroidTM-based devices.

To download the app, search for Tone & Talk in Google PlayTM* or scan the QR code. Follow the installation instructions. *Google Play is a trademark of Google,

Inc.

Function Action

Current time alert

Read latest SMS or MMS

Designated contact

Favorite contacts

Call logs

Slide the FF/REW jog button to the FF position for 1 second. Slide the FF/REW jog button to the REW position for 1 second.

1. Select Designated contact in the headset call settings of

the app.

2. To call the Designated contact, press the CALL button twice

on your headset.

1. Select Favorite contacts in the headset call settings of

the app.

2. Press the CALL button twice on your headset.

3. Use the FF/REW jog button to choose the contact.

4. To call the Favorite contact, press the CALL button twice.

1. Select Call logs in the headset call settings of the app.

2. Press the CALL button twice on your headset.

3. Use the FF/REW jog button to choose the contact.

4. To call the contact, press the CALL button twice.

How to Use

ENG

Summary of Button Functions

Function Headset Status Action

ENG

Power on Power off

Power off Power on

Volume up Talking/Music on

Volume down Talking/Music on

Transferring a call Talking

Answering a call Ringing

Stop incoming call

vibration

Vibration on/off Idle

Ending a call Talking

Call waiting Talking

Last number redial Idle

Voice dialing (must be supported on mobile device)

Ringing

Idle

Slide the Power switch to the ON position.

Slide the Power switch to the OFF position.

Slide the VOLUME jog button to the “+” position.

Slide the VOLUME jog button to the “-” position.

Press the PLAY/PAUSE/STOP button twice.

Briey press the CALL button.

Briey slide the VOLUME jog button to the “-” position.

Slide the VOLUME jog button to the “+” position for 2 seconds.

Briey press the CALL button.

Press the CALL button for 1 second.

Briey press the CALL button.

Summary of Button Functions

Function Headset Status Action

Call reject Ringing

Microphone mute

on/off

Pairing mode (Manual) Power off

Battery status check Idle

Play Power on

Pause Music on

Stop Music on

Next song Music on

Previous song Music on

Fast forward Music on

Rewind Music on

Equalizer settings Music on

Talking

Press the CALL button for 2 seconds.

Slide the VOLUME jog button to the “+” position and the FF/REW jog button to the REW position at the same time for 1 second.

Press the CALL button and slide the Power switch to the ON

position at the same time for 2 seconds.

Slide the VOLUME jog button to the “-” position for 1 second.

Briey press the PLAY/PAUSE/STOP button.

Press and hold the PLAY/PAUSE/STOP button for 1 second.

Briey slide the FF/REW jog button to the FF position.

Briey slide the FF/REW jog button to the REW position.

Slide and hold the FF/REW jog button in the FF position.

Slide and hold the FF/REW jog button in the REW position.

Press the PLAY/PAUSE/STOP button twice.

ENG

LED Indicator

Function Headset Status

ENG

Operating

Charging

Power on The blue LED light ickers 4 times. Power off The blue LED light ickers 4 times, then powers off. Pairing mode Solid blue LED light.

Headset/hands-free

prole connected

Call connected The blue LED light ickers 1 time every 5 seconds.

Charging

Charging complete Solid blue LED light.

The blue LED light ickers 1 time every 5 seconds.

Solid red LED light, which changes to violet when charged 80% or more.

Indicator

Troubleshooting

Problem Possible Causes Possible Solution

Does not power on

Unable to

communicate with

the LG Bluetooth

Headset HBS-810

Unable to pair the

HBS-810 with the

Bluetooth device

Low sound (speaker) Check the speaker volume. lncrease the volume level.

Check whether the battery of the headset is fully charged.

Check whether the mobile device

you are trying to pair supports the headset or hands-free

proles.

Check whether the battery of the headset is low.

Check to make sure the headset is on.

Check to make sure the headset is placed in Pairing mode.

Bluetooth

Charge the battery.

Determine whether your mobile

device supports the headset or hands-free Bluetooth proles.

Charge the battery.

Slide the Power switch to the ON position to power on the headset.

With the power off, press the CALL

button and slide the Power switch to

the ON position at the same time for 1 second to manual place the headset in Manual Pairing mode.

ENG

Specications

ENG

Item Description

Electrical data Operating

Bluetooth version

Battery

Talk time Up to 17 hours Music play time Up to 13 hours Standby time Up to 550 hours Charging time Less than 2 hours Operation temperature 14°F ~ 140°F (-10°C ~ 60°C) Dimensions/weight 147mm(W)x164mm(L)x14.9mm(H)/41g

4.75 - 5.3 V 0 400 mV

4.1 (Headset/Hands-Free/A2DP proles) Battery 3.7 V/220 mAh Li-Polymer

Precautions

Do not drop the device.

Do not modify, repair, or disassemble. Do not expose directly to water, alcohol, benzene, etc., for cleaning. Do not expose directly to ammables. Do not place or keep the device near ammables. Keep the device away from excessive humidity and dust. Do not place heavy objects on the device. Only charge the headset with an original LG charger, otherwise it may be damaged.

• Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• Risk of damage or explosion if incorrect battery is used.

• Dispose of used batteries according to the instructions.

• This product contains small parts, including ear gels, earbuds, and cables. Keep out of reach

of children.

• If you have an implanted medical device, consult with a doctor prior to using this product.

• If you need to replace the battery, take it to the nearest authorised LG Electronics service point

or dealer for assistance.

• Li-Ion Battery is a hazardous component which can cause injury.

• Battery replacement by non-qualied professional can cause damage to your device.

ENG

Declaration of Conrmation

FCC NOTICE TO USERS:

ENG

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause

undesired operation.

Changes or modications not expressly approved by the manufacturer (or party responsible) for compliance could void the user’s authority to operate the equipment.

FCC Part 15.105 statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Declaration of Conrmation

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

- Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT NOTE:

To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the

device.

Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.

FCC ID: ZNFHBS810

IFT : RCPLGHB15-1991

ENG

Additional Information

1. Radio frequency exposure

ENG

This Bluetooth Stereo Headset HBS-810 is a radio transmitter and receiver. When in operation it communicates with a Bluetooth-equipped mobile device by receiving and transmitting radio frequency (RF) electromagnetic elds (microwaves) in the frequency range 2.4 to 2.4835

GHz. Your Bluetooth headset is designed

to operate in compliance with the RF exposure guidelines and limits set by

national authorities and international health

agencies when used with any compatible LG Electronics mobile device.

2. Potentially explosive atmosphere

Power off your electronic device when in any area with a potentially explosive

atmosphere. Although this is uncommon,

your electronic device could generate sparks. Sparks in such areas could cause

an explosion or re resulting in bodily injury

or even death. Areas with a potentially

explosive atmosphere are often, but not always, clearly marked.

3. Emergency calls

IMPORTANT! This Bluetooth headset and the electronic

device connected to the headset operate

using radio signals, mobile and landline networks as well as user-programmed functions, which cannot guarantee

connection under all conditions.

Therefore you should never rely solely

upon any electronic device for essential

communications (e.g. medical emergencies). Remember, in order to make or receive calls, the headset and the electronic device connected to the headset must be powered

on and in a service area with adequate

mobile signal strength. Emergency calls may not be possible on all mobile phone networks

or when certain network services and/or phone features are in use. Check with your local service provider.

4. Battery information

A rechargeable battery has a long service life if treated properly. A new battery or one that has not been used for a long period

of time could have reduced capacity the rst few times it is used. Do not expose the battery to extreme temperatures, never above +60°C (+140°F) or below -10°C (14°F). For maximum battery capacity, use the battery at room temperature. If the battery is used in low temperatures,

the battery capacity will be reduced.

The battery can only be charged in temperatures between +10°C (+50°F) and +45°C (+113°F). For your safety, do not remove the battery incorporated with

the product. If you need to replace the

battery, take it to the nearest authorized

LG Electronics service point or dealer for assistance.

Additional Information

5. Recycling the battery in your Bluetooth headset

The battery in your Bluetooth headset must

be disposed of properly and should never

be placed in municipal waste. The LG Electronics service partner who removes

the battery will dispose of it according to local regulations.

ENG

Additional Information

6. Conditions

ENG

(Except Mexico and Argentina)

- The warranty is valid only if the original

receipt issued to the original purchaser

by the dealer, specifying the date of purchase and serial number, is presented

with the product to be repaired or replaced. LG Electronics reserves the right to refuse warranty service if

this information has been removed or

changed after the original purchase of the

product from the dealer.

- If LG Electronics repairs or replaces the

product, the repaired or replaced product shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. Repair or replacement may involve the use of

functionally equivalent reconditioned

units. Replaced parts or components will become the property of LG Electronics.

- This warranty does not cover any failure of the product due to normal wear and tear, or due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with instructions for use and maintenance

of the product. Nor does this warranty cover any failure of the product due to

accident, modication or adjustment, acts of God or damage resulting from liquid.

- This warranty does not cover product failures due to improper repair installations, modications or service performed by a non-LG Electronics authorized person. Tampering with any

of the seals on the product will void the warranty.

- THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL, OTHER THAN THIS PRINTING INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW.

Additional Information

• Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. The warranty provided does not affect the consumer’s

statutory rights under applicable national

legislation in force, nor the consumer’s rights against the dealer arising from their

sales/purchase contract.

ENG

+ 63 hidden pages