LG HBS-760 TonePRO, TONE PRO HBS-760 User Manual
HBS-760 User Manual
English
Español
Bluetooth
®
Stereo Headset
Rev 1.0 US
All rights reserved.
LG Electronics Inc., 2015
Note: Please read all information carefully prior to
using the HBS-760 in order to prevent damages to
the product and to enjoy the best performance.
WARNING :
This product contains chemicals known to the State
of California to cause cancer and birth defects or
reproductive harm.
Wash hands after handling.
Table of Contents
Introduction 3
ENG
- Included in the Package 3
Description of Parts 4
How to Use 5
- Power On / Power Off 5
- Charging 5
- Low Battery 5
- Battery Status Alert 5
- Pairing 5
- Multi-connection 6
- Auto Reconnect 7
- Calling 7
• Answering a Call 7
• Transferring a Call 7
• Voice Dialing 8
• Last Number Redial 8
• Ending a Call 8
• Call Waiting 8
• Rejecting a Call 8
• Mic Mute 8
- Volume Control 8
- Vibration Control 9
- Audio Streaming 9
- Equalizer 9
- aptX 9
- Tone & Talk 10
Summary of HBS-760 Functions 11
LED Indicator 12
Troubleshooting 12
Specifications 13
Precautions 13
Declaration of Confirmation 14
Additional Information 14
Limited Warranty 17
Important Safety Information 17
2
Introduction
The LG TONE PROTM (HBS-760) is a lightweight wireless headset that uses
Bluetooth technology.
This product can be used as an audio accessory for devices supporting either the
A2DP or Hands-Free Bluetooth Prole.
Included in the Package
ENG
HBS-760
(Medium ear gels installed)
Extra Ear Gels
(small & large)
User Manual Warranty Card Quick Start Guide
* Actual product design may differ from images shown in manual.
*USB Charging Cable
3
ENG
Description of Parts
Headset
LED Indicator
Power Switch
Charging Port
FF/REW Switch
PLAY/PAUSE/STOP Button
Earbud (R)
Microphone
VOLUME Switch (+/-)
CALL Button
Earbud (L)
4
How to Use
Power On / Power Off
- Slide the Power switch to the ON or OFF position.
Charging
- When the charger is connected (with the power on or off) the headset will turn off.
-
While charging, the LED indicator will show a solid red light and then change to
violet when charged 80% and above.
- When charging is completed, the LED indicator will show a solid blue light.
Low Battery
- A low battery alert will play once every 2 minutes.
- If the battery is not charged, the headset will turn off.
ENG
Battery Status Alert
- Slide the VOLUME switch to the - position for 1 second to check the battery status
of the HBS-760.
Battery Status High Medium Low
Voice Prompt Battery High Battery Medium Battery Low
Blinking
Blinking
Blinking
LED Indicator
Blue
Violet
Red
Pairing
- Before using, HBS-760 must be paired/connected with a Bluetooth-enabled device.
1) Easy Pairing
a) Slide the Power switch to the ON position.
b) If it is your rst time pairing the device or if it has been paired but no paired
device is within range, it will enter Pairing Mode.
• The LED indicator will be solid blue.
c) On the device you wish to pair, nd the Bluetooth menu and search for or add
new devices.
5
ENG
How to Use
d) Select LG HBS760 from the list of devices.
e) If asked for a Pass/Pin Code enter 0000 (4 Zeros).
f) Once the devices are paired, you will hear “Your headset paired.”
• The HBS-760 will automatically turn off if not paired within 3 minutes.
2) Manual Pairing (pairing with another phone or re-pairing)
a) With the power off, press the CALL button and slide the Power switch to the
ON position at the same time for 2 seconds.
b) When the headset enters Pairing Mode, the LED indicator will show a solid
blue light. After the procedure repeat Easy Pairing steps c though f.
Multi-connection
Advanced Multipoint
The HBS-760 is capable of having two devices connected to the headset at the
same time. This will give you the freedom of using call waiting between calls on
both of your connected phones.
Connecting
- Pair the headset with one of your Bluetooth-enabled handsets (see the pairing
instructions on pages 5 and 6).
- Turn off the headset.
- With the power off, press the CALL button and slide the Power switch to the ON
position at the same time for 2 seconds to enter Manual Pairing Mode.
- Pair and connect the headset with your other Bluetooth-enabled handset. This
will be your primary headset.
- Once the handset is paired and connected, connect the originally paired handset
to the headset. This will now be your secondary handset.
* NOTE: When the HBS-760 is connected to two handsets at the same time
(Multipoint), the headset calling functions will work with the primary handset.
* NOTE: In case of failure to connect to the primary phone through Easy Pairing,
HBS-760 will enter Pairing Mode.
Calling
- Voice Dialing and Last Number Redial features work with the primary handset
(or handset which made the last outgoing call).
6
Loading...