English
Español
HBS-760 User Manual
Bluetooth® Stereo Headset
Rev 1.0 SCA
All rights reserved. LG Electronics Inc., 2016
NOTE: Please read all information carefully prior to using the HBS-760 in order to prevent product damage and to enjoy the best performance.
Any modifications or changes to this manual due to typographical errors or inaccuracies of stated information shall only be made by LG Electronics Inc.
www.lg.com
<![endif]>ENG
2
Table of Contents
Introduction |
3 |
- Included in the Package |
3 |
Description of Parts |
4 |
How to Use |
5 |
- Power On / Power Off |
5 |
- Charging |
5 |
- Low Battery |
5 |
- Battery Status Alert |
5 |
- Pairing |
5 |
- Multi-connection |
6 |
- Auto Reconnect |
7 |
- Calling |
7 |
• Answering a Call |
7 |
•Transferring a Call |
7 |
• Voice Dialing |
7 |
• Last Number Redial |
8 |
• Ending a Call |
8 |
• Call Waiting |
8 |
• Rejecting a Call |
8 |
• Mic Mute |
8 |
- Volume Control |
8 |
- Vibration Control |
8 |
- Audio Streaming |
9 |
- Equalizer |
9 |
- aptX |
9 |
-Tone &Talk |
10 |
Summary of HBS-760 Functions |
11 |
LEDIndicator |
12 |
Troubleshooting |
12 |
Specifications |
13 |
Precautions |
13 |
Declaration of Confirmation |
14 |
AdditionalInformation |
15 |
Limited Warranty (Except Argentina) |
17 |
Important SafetyInformation |
18 |
Introduction
The LGTONE PROTM (HBS-760) is a lightweight wireless headset that usesBluetooth technology.
This product can be used as an audio accessory for devices supporting either the A2DP or
Hands-Free Bluetooth Profile.
Included in the Package
<![endif]>ENG
HBS-760 |
Extra Ear Gels |
*USB Charging Cable |
||||||||||||
(Medium ear gels installed) |
(small & large) |
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
User Manual |
Warranty Card |
|
(Argentina only) |
* Actual product design may differ from images shown in manual.
3
Description of Parts
Headset
<![if ! IE]><![endif]>ENG
LEDIndicator |
Microphone |
|
Power Switch |
VOLUMESwitch(+/-) |
|
Charging Port |
||
CALL Button |
||
|
||
|
Earbud(L) |
FF/REWSwitch
PLAY/PAUSE/STOPButton
Earbud(R)
4
How to Use
Power On / Power Off
- Slide the Power switch to the ON or OFF position.
Charging
-When the charger is connected (with the power on or off) the headset will turn off.
-While charging, the LED indicator will show a solid red light and then change to violet when charged 80% and above.
-When charging is completed, the LED indicator will show a solid blue light.
Low Battery
-A low battery alert will play once every 2 minutes.
-If the battery is not charged, the headset will turn off.
Battery Status Alert
-Slide the VOLUME switch to the - position for 1 second to check the battery status of the
HBS-760.
Battery Status |
High |
Medium |
Low |
|
Voice Prompt |
Battery High |
Battery Medium |
Battery Low |
|
LED Indicator |
Blinking |
Blinking |
Blinking |
|
Blue |
Violet |
Red |
||
|
Pairing
- Before using, HBS-760 must be paired/connected with aBluetooth-enabled device.
1)Easy Pairing
a)Slide the Power switch to the ON position.
b)If it is your first time pairing the device or if it has been paired but no paired device is within range, it will enter Pairing Mode.
•The LED indicator will be solid blue.
c)On the device you wish to pair, find theBluetooth menu and search for or add new devices.
<![endif]>ENG
5
<![endif]>ENG
6
How to Use
d)Select LG HBS760 from the list of devices.
e)If asked for a Pass/Pin Code enter 0000 (4 Zeros).
f)Once the devices are paired, you will hear “Your headset paired.”
•The HBS-760 will automatically turn off if not paired within 3 minutes.
2)Manual Pairing (pairing with another phone or re-pairing)
a)With the power off, press the CALL button and slide the Power switch to the ON position at the same time for 2 seconds.
b)When the headset enters Pairing Mode, the LED indicator will show a solid blue light.
After the procedure repeat Easy Pairing steps c though f.
Multi-connection
Advanced Multipoint
The HBS-760 is capable of having two devices connected to the headset at the same time.This will give you the freedom of using call waiting between calls on both of your connected phones.
Connecting
-Pair the headset with one of your Bluetooth-enabled handsets (see the pairing instructions on pages 5 and 6).
-Turn off the headset.
-With the power off, press the CALL button and slide the Power switch to the ON position at the same time for 2 seconds to enter Manual Pairing Mode.
-Pair and connect the headset with your other Bluetooth-enabled handset.This will be your primary headset.
-Once the handset is paired and connected, connect the originally paired handset to the headset.This will now be your secondary handset.
*NOTE: When the HBS-760 is connected to two handsets at the same time (Multipoint), the headset calling functions will work with the primary handset.
*NOTE:In case of failure to connect to the primary phone through Easy Pairing, HBS-760 will enter Pairing Mode.
Calling
-Voice Dialing and Last Number Redial features work with the primary handset (or handset which made the last outgoing call).
|
|
How to Use |
|
|
|
|
Call Waiting |
|
|
|
|
|
- While on a call, press the CALL button for 1 second to switch to an incoming call. |
|
|
|
|
|
-To switch between 2 active calls, press the CALL button for 1 second. |
|
|
<![if ! IE]> <![endif]>ENG |
|
|
-To end both calls briefly press the CALL button. |
|
|
||
|
-If both handsets are receiving an incoming call, the headset will default to the primary device. |
|
|
|
|
|
Auto Reconnect |
|
|
|
|
|
|
|
|
-The headset and handset will automatically reconnect when the HBS-760 is turned back on while in range.
-The secondary handset will need to be connected manually. Select LG HBS760 from the list of devices in the Bluetooth menu and pair.
Out of Range
-If the paired devices are separated by a range of 33 feet (10 meters) or more, the headset and handset will disconnect and the HBS-760 will vibrate to alert you*.
*To turn off device vibration, slide the VOLUME switch to the + position and hold for 2 seconds.
-If the headset and handset do not automatically reconnect when they are back within the required range, briefly press the CALL button on the HBS-760 to reconnect manually.
-While in multi-connection and streaming, the inactive paired device will be disconnected when out of range.The HBS-760 will alert you once with no attempt to reconnect.
Calling
Answering a Call
-When there is an incoming call, the headset will ring and vibrate.
-Briefly slide the VOLUME switch to the - position to stop the vibration*.
*The HBS-760 will not vibrate if the vibration function has been turned off.
-Briefly press the CALL button to answer the incoming call.
Transferring a Call
-You can manually transfer the call to or from the headset by pressing the PLAY/PAUSE/
STOP button twice on the HBS-760 (handset and headset must be paired).
Voice Dialing
- Briefly press the CALL button to activate Voice Command. For best results, record the voice dialing tag through your headset.
NOTE:If your handset does not support voice dialing, this action may activate Last Number
Redial.
7
<![endif]>ENG
How to Use
Last Number Redial
-Press and hold the CALL button for 1 second to activate Last Number Redial. The headset will beep and then call the last number dialed.
Ending a Call
- Briefly press the CALL button.
Call Waiting
-Answer a second call without hanging up the first call by pressing the CALL button for 1 second. Press the CALL button for 1 second to return to the original call.
-Briefly press the CALL button to terminate both calls at once.
Rejecting a Call
- Activate call reject by pressing the CALL button for 2 seconds when the handset rings.
*These functions may only be used if your handset supports them. For further information about using these features, please consult your handset’s user manual.
Mic Mute
-Slide the VOLUME switch to the + position and the FF/REW switch to the REW position at the same time for 1 second to mute/unmute the Mic during conversation.
* Caution: For your safety, do not use this function while driving.
Volume Control
-Slide the VOLUME switch to the + or - position to adjust the speaker volume.
-To prevent hearing loss, which is caused by listening to music for long periods of time, the HBS-760 will emit a long beep tone or two beeps when you use the upper 6 volume levels.
Vibration Control
-To activate or deactivate device vibration, slide the VOLUME switch to the + position for 2 seconds. You will hear “Vibrate on” or “Vibrate off” when it is activated or deactivated.
-When vibration is turned off, the headset will not vibrate when receiving an incoming call or when it is out of range.
-Vibration will automatically be activated when the device is powered on.
8
How to Use
Audio Streaming
Play
-Briefly press the PLAY/PAUSE/STOP button.
Pause
-While playing music, briefly press the PLAY/PAUSE/STOP button.
Stop
-While playing music, press and hold the PLAY/PAUSE/STOP button for 1 second.
Next song
-Briefly slide the FF/REW switch to the FF position.
Previous song
-Briefly slide the FF/REW switch to the REW position.
Fast Forward
-Slide and hold the FF/REW switch to the FF position.
Rewind
- Slide and hold the FF/REW switch to the REW position.
Equalizer
-While playing music, press the PLAY/PAUSE/STOP button twice to switch between Bass Boost (default), Normal, andTreble Boost.
-The size of the ear gel can affect the amount of bass you hear.
aptX
-The HBS-760 features aptX technology that ensures audio content transmitted via
Bluetooth is seamless and crystal-clear.
-aptX is automatically enabled as long as the source device supports it.
<![endif]>ENG
9
How to Use
<![endif]>ENG
Tone & Talk
The HBS-760Bluetooth headset supports SMS reading on AndroidTM based devices.
To download the application, search forTone &Talk in Google PlayTM* or scan the QR code. Follow the installation instructions.
* Google Play is a trademark of Google,Inc.
Function |
|
Action |
|
|
|
||
Current time alert |
Slide the FF/REW switch to the FF position for 1 second. |
||
Read latest SMS or MMS |
Slide the FF/REW switch to the REW position for 1 second. |
||
|
1. |
Select Designated contact in the Headset call settings of |
|
Designated contact |
|
the app. |
|
2. |
Press the CALL button twice on your headset to call the |
||
|
|||
|
|
Designated contact. |
|
|
1. |
Select Favorite contacts in the Headset call settings of the app. |
|
Favorite contacts |
2. |
Press the CALL button twice on your headset. |
|
3. |
Use the FF/REW switch to choose the contact. |
||
|
|||
|
4. |
Press the CALL button twice to call the contact. |
|
|
1. |
Select Call logs in the Headset call settings of the app. |
|
Call logs |
2. |
Press the CALL button twice on your headset. |
|
3. |
Use the FF/REW switch to choose the contact. |
||
|
|||
|
4. |
Press the CALL button twice to call the contact. |
|
|
|
|
10
Summary of HBS-760 Functions
Function |
HBS-760 Status |
|
Power on |
Power off |
|
Power off |
Power on |
|
Volumeup |
Talking/Musicon |
|
Volumedown |
Talking/Musicon |
|
Transferringacall |
Talking |
|
Answering a call |
Ringing |
|
Stop incoming call |
Ringing |
|
vibration alerting |
||
|
||
Vibrationon/off |
Idle |
|
Ending a call |
Talking |
|
Call waiting |
Talking |
|
Last number redial |
Idle |
|
Voicedialing |
Idle |
|
(handsetmustsupport) |
||
Call reject |
Ringing |
|
Mic mute on/off |
Talking |
|
Pairingmode(Manual) |
Power off |
|
Battery status check |
Idle |
|
Play |
Power on |
|
Pause |
Music on |
|
Stop |
Music on |
|
Nextsong |
Music on |
|
Previous song |
Music on |
|
Fast forward |
Music on |
|
Rewind |
Music on |
|
Equalizer settings |
Music on |
Action
SlidethePowerswitchtotheONposition.
Slide the Power switch to the OFF position.
SlidetheVOLUMEswitchtothe+position.
SlidetheVOLUMEswitchtothe-position.
PressthePLAY/PAUSE/STOPbuttontwice. BrieflypresstheCALLbutton.
BrieflyslidetheVOLUMEswitchtothe-position.
SlidetheVOLUMEswitchtothe+positionfor2seconds. BrieflypresstheCALLbutton.
PresstheCALLbuttonfor1second.
PresstheCALLbuttonfor1second.
BrieflypresstheCALLbutton.
PresstheCALLbuttonfor2seconds.
SlidetheVOLUMEswitchtothe+positionandtheFF/REW switchtotheREWpositionatthesametimefor1second.
PresstheCALLbuttonandslidethePowerswitchtotheON positionatthesametimefor2seconds.
SlidetheVOLUMEswitchtothe-positionfor1second. BrieflypressthePLAY/PAUSE/STOPbutton.
BrieflypressthePLAY/PAUSE/STOPbutton.
PressandholdthePLAY/PAUSE/STOPbuttonfor1second. BrieflyslidetheFF/REWswitchtotheFFposition.
BrieflyslidetheFF/REWswitchtotheREWposition. SlideandholdtheFF/REWswitchintheFFposition. SlideandholdtheFF/REWswitchintheREWposition. PressthePLAY/PAUSE/STOPbuttontwice.
<![endif]>ENG
11
<![endif]>ENG
LED Indicator
Function |
HBS-760 Status |
Indicator |
|
|
Pairing mode |
Solid blue LED light. |
|
Operating |
Headset / hands-free profile |
The blue LED light flickers 1 time. |
|
|
connected |
|
|
|
Call connected |
The blue LED light flickers 1 time. |
|
|
Charging |
Solid red LED light, which changes to violet when |
|
Charging |
charged 80% and above. |
||
|
|||
|
Charging complete |
Solid blue LED light. |
Troubleshooting
Issue
Does not turn on
Unable to communicate with the LG Bluetooth Headset HBS-760
Unable to pair the HBS-760 with the
Bluetooth device
Low sound (speaker)
Possible problem |
Resolution |
|
Check whether the battery of |
Charge the battery. |
|
the HBS-760 is fully charged. |
||
|
||
Check whether the handset |
Determine whether your handset |
|
supports the headset or |
supports the headset or hands-free |
|
hands-free Bluetooth profiles. |
Bluetooth profiles. |
|
Check whether the battery of |
Charge the battery. |
|
the HBS-760 is low. |
||
|
||
Check and make sure the |
Slide the Power switch to the ON |
|
headset is on. |
position to turn on the headset. |
|
|
With the power off, press the CALL |
|
Check and make sure the |
button and slide the Power switch |
|
headset is placed in Pairing |
to the ON position at the same time |
|
Mode. |
for 2 seconds to place the headset in |
|
|
Manual Pairing mode. |
|
Check the speaker volume. |
lncrease the volume level. |
|
|
|
12