LG HBS-700 User manual

LG Electronics
BLUETOOTH® Stereo Headset HBS-700 User Manual
Note: Please read all information carefully prior to using
HBS-700 in order to prevent damages to the product and to
typographical errors or inaccuracies of stated information
shall only be made by LG Electronics Inc.
English
Français
All rights reserved.
LG Electronics Inc., 2012
enjoy the best performance.
Rev 1.0 CA
ENG
2
Table of Contents
Introduction 3
- Included in the package 3 Description of parts 4 How to use 4
- Wearing 4
- Charging 5
- Low battery 5
- Battery status check 5
- Power on / Power off 5
- Pairing 5
- Multi-connection 6
- Auto reconnect 7
- Audio streaming 7
-Bass Boost 8
- Volume control 8
- Calling 8
• Answering a call 8
• Transferring a call 8
• Voice dialing 8
• Last number redial 9
• Ending a call 9
• Call waiting 9
• Rejecting a call 9
- SMS reader 9
Summary of button functions 10 LED indication 11
Troubleshooting 11
Specification 12 Precautions 12 Declaration of confirmation 13 Additional information 13 Limited warranty 16 Important safety information 16
Introduction
The LG Bluetooth® Stereo Headset HBS-700 is a light weight wireless headset that
uses Bluetooth® technology.
This product can be used as an audio accessory for devices supporting either the
A2DP or Hands-Free Bluetooth® Prole.
Included in the package
ENG
LG HBS-700
Bluetooth® Stereo Headset
Charger User manual
Earbuds
3
Description of parts
Headset
ENG
Memory ex neck strap
REW Button
FF Button
PLAY / PAUSE /
STOP Button
Earphone (R)
How to use
Wearing
4
Charging port
Power Switch
VOLUME UP Button
VOLUME DOWN Button
CALL Button, LED indicator
Microphone
Earphone (L)
How to use
Charging
- When the charger is connected, with the power on or off, the headset will turn off.
- While charging, the LED indicator will show a solid red light.
- When charging is complete, the LED indicator will turn off.
Low battery
- A low battery tone will play once every 30 seconds.
- If the battery is not charged, the headset will turn off.
Battery status check
- Press and hold the VOLUME DOWN button for 3 seconds.
- There are 3 levels of battery status.
Battery status High Medium Low
LED display
Power on / Power off
- Move the power switch to the ‘ON’ or ‘OFF’ position.
Pairing
- Before using the headset for the rst time, you must pair it with a Bluetooth-enabled
Device.
- There are 2 Pairing Mode Methods with the HBS-700.
1) Easy Pairing
a) Move the Power Switch to the “ON” position. b) If it is your rst time paring the device it will automatically enter pairing mode.
Solid blue for 1 second Solid violet for 1 second Solid red for 1 second
If it has been paired but no paired device is in range it will enter Pairing mode after 10 seconds.
ENG
5
How to use
• The LED indicator will be Solid Blue
c) On the device you wish to pair, nd the bluetooth menu and “search for” or
ENG
“add” new devices d) Select “LG HBS-700” From the list of devices e) If asked for a Pass/Pin Code enter 0000 (4 Zeros) f) Once pairing is complete you will hear a beep
• The HBS-700 will automatically turn off if not paired within 3 minutes.
2) Manual Pairing (Pairing with another phone or re-pairing)
a) With the Power off, press the CALL button and move the power switch to the
‘ON’ position at the same time for 4 seconds.
b) When the headset enters Pairing Mode, the LED indicator will show a solid
blue light. After the procedure repeat Easy Pairing steps c through f.
Multi-connection
- In Multi-Connection mode, only one device can be used to make/receive calls, and the other connected device can only be used for streaming Audio.
- To enter Multi-Connection mode:
1. Connect your HBS-700 to the device you wish to use for making calls.
2. Power off the HBS-700
3. Place your HBS-700 into pairing mode and pair/connect to a Bluetooth Stereo
enabled audio device (not your handset). (This Bluetooth Stereo enabled audio device must only support the A2DP/AVRCP proles, not the headset/hands­free proles)
4. Once the Bluetooth Stereo enabled device is paired and connected, press the
CALL button once briey on the HBS-700 to reconnect with the handset (only the headset/hands-free prole will connect).
5. The handset is now paired with the headset/hands-free prole of the HBS-700.
The Bluetooth Stereo enabled audio device is paired with A2DP/AVRCP stereo proles.
6
How to use
* NOTE: In order to access Multi-Connection mode, at least one of the two devices
you are trying to connect to the HBS-700 must be able to select a prole, or one of the two devices must only support one prole (Either Headset/ Hands-Free or A2DP/AVRCP). For example: Two handsets which support both the Headset/Hands-Free and A2DP/AVRCP proles cannot be
connected to the HBS-700 simultaneously. But, one handset supporting
Headset/Hands-Free/A2DP/AVRCP and a Bluetooth Stereo Dongle supporting only A2DP/AVRCP is OK.
Auto reconnect
- If the HBS-700 is turned off (either accidentally or intentionally) while connected to a handset, the headset and handset will disconnect. The headset and handset will
automatically reconnect when the HBS-700 is turned back on while in range.
Out of range
- If the paired Devices are separated by a range of 33 feet (10 meters) or more, the
headset and handset will disconnect.
- If the headset and handset do not automatically reconnect when they are back
within the required range, briey press the CALL button on the HBS-700 to
reconnect manually.
Audio streaming
Play
- Briey press the PLAY/PAUSE/STOP Button.
Pause
- While playing music, briey press the PLAY/PAUSE/STOP button.
Stop
- While playing music, press and hold the PLAY/PAUSE/STOP button for 1 second.
Next Song
- Briey press the FF button.
Previous song
- Briey press the REW button.
ENG
7
How to use
Fast forward
- Press and hold the FF button.
ENG
Rewind
- Press and hold the REW button.
Bass Boost
- While playing music, press and hold VOLUME UP and VOLUME DOWN buttons
simultaneously for 1 second to switch between EQ’s (Normal or Bass Boost). The headset will beep.
Volume control
- Press the VOLUME UP or VOLUME DOWN button to adjust the speaker volume.
- There are eight levels of speaker volume in hands-free mode.
- There are sixteen levels of speaker volume in audio streaming mode.
Calling
Answering a call
- When there is an incoming call, the headset will ring.
- Briey press the CALL button to answer the incoming call.
Transferring a call
- If you make a call from the handset, the call will (depending on the phone settings)
automatically transfer to the headset. If the call is not automatically transferred, you can manually transfer the call to, or from, the headset by pressing and holding VOLUME UP button for 3 seconds on the HBS-700 (handset and headset must
be paired).
Voice dialing
- Briey press the CALL button to activate “Voice Command”. For best results,
record the Voice dialing tag through your headset.
NOTE: If your handset does not support Voice dialing, this action may activate
8
Last Number Redial.
How to use
Last number redial
- Press and hold the CALL button for 1 second to activate “Last number redial”. The headset will beep and then call the last number dialled.
Ending a call
- Briey press the CALL button.
Call waiting
- Answer a second call without hanging up the rst call by pressing the CALL button
for 1second. Press the CALL button for 1second to return to the original call.
- Briey press the CALL button to terminate both calls at once.
Rejecting a call
- Activate call reject by pressing the CALL button for 1 second when the handset rings.
* These functions may only be used if your handset supports them. For further
information about using these features, please consult your handset’s user manual.
SMS reader
The HBS-700 Bluetooth Headset supports SMS reading on Android TM based
devices.
In the Google Play™ Store search for the LG ‘BT Reader’ application and install on
your device to use this function.
* The 2D barcode shown below helps you download the ‘BT Reader’ application
Google Play™ Store. Google Play is a trademark of Google, Inc.
ENG
9
Summary of button functions
ENG
Function
Power on Power off Move the power switch to the ‘ON’ side. Power off Power on Move the power switch to the ‘OFF’ side. Volume up Talking Briey press the VOLUME UP button. Volume down Talking Briey press the VOLUME DOWN button.
Transferring a call Talking
Answering a call Ringing Briey press the CALL button. Ending a call Talking Briey press the CALL button. Call waiting Talking Press the CALL button for 1 second. Last number redial Idle Press the CALL button for 1 second. Voice dialing
(handset must
support)
Call reject Ringing Press the CALL button for 1 second.
Pairing mode
(Manual)
Battery status check Play Power on Briey press the PLAY/PAUSE/STOP button. Pause Music on Briey press the PLAY/PAUSE/STOP button.
Stop Music on
Next song Music on Briey press the FF button. Previous song Music on Briey press the REW button. Fast forward Music on Press and hold the FF button. Rewind Music on Press and hold the REW button.
Bass Boost Music on
10
HBS-700 Status
Press and hold VOLUME UP button for 3 seconds.
Idle Briey press the CALL button.
Power off
Idle Press the VOLUME DOWN button for 3 seconds.
Press the CALL button and move the power switch to the ‘ON’ side at the same time for 4 seconds.
Press and hold the PLAY/PAUSE/STOP button
for 1 second.
Press and hold VOLUME UP and VOLUME DOWN buttons simultaneously for 1 second.
Action
LED indication
Function HBS-700 Status Action
Power on The blue LED light ickers 4 times.
Power off
Pairing mode The blue LED light stays on.
Operating
Headset / hands-free
prole connected
Call connected
Charging The blue LED stays on.
Charging
Charging complete
The blue LED light ickers 4 times and then
turns off.
The blue LED light ickers 2 times every 5
seconds.
The blue LED light ickers 2 times every 5
seconds.
LED turns off.
Troubleshooting
Issue Possible problem Resolution
Does not turn on
Unable to communicate with the LG Bluetooth® Headset HBS-700
Unable to pair the HBS-700 with the Bluetooth® device
Low sound (speaker) Check the speaker volume. lncrease the volume level.
Check whether the battery of the HBS-700 is fully charged.
Check whether the handset supports the headset or
hands-free Bluetooth proles.
Check whether the battery of the HBS-700 is low.
Check and make sure the headset is on.
Check and make sure the headset is placed in pairing mode.
Charge the battery.
Determine whether your handset supports the headset or hands-
free Bluetooth proles.
Charge the battery.
Move the power switch to the ‘ON’ side to turn on the headset.
With the Power off, press the CALL button and move the power switch to the ‘ON’ side at the same time for 4 seconds to manually place the headset in pairing mode.
ENG
11
Specication
ENG
Item Description
Bluetooth® specication Battery Talk Time Up to 10Hrs Music play time Up to 10 Hrs Standby time Up to 360Hrs Charging time < 2.5Hrs Operation temperature -10°C ~ 60°C Dimension / weight 135.6mm(W) X 167.3mm(L) X 16.9mm(T) / 32g
2.1+EDR (Headset / Hands-Free / A2DP Proles) Battery 3.7V / 195mAh Li-Polymer
Precautions
Do not drop the device. Do not modify, repair, or disassemble.
Do not expose directly to water, alcohol, benzene, etc for cleaning. Do not expose directly to ammables. Do not place or keep the device near ammables. Keep the device away from excessive humidity and dust.
Do not place heavy objects on the device. Only use the headset with an original LG charger, otherwise it may be damaged.
• Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
• There is a risk of explosion if the battery is replaced by an incorrect type.
• Dispose of used batteries according to the instructions.
• The neck strap is made of a shape memory alloy. However, bending the neck
strap repeatedly is not recommended.
12
Loading...
+ 28 hidden pages