English
Español
All rights reserved.
LG Electronics Inc., 2007
Note : For the best performance and
to prevent any damage to, or misuse of the
HBM-760/761, please read all of the information
carefully prior to using the HBM-760/761.
Any modifications or changes to this manual due to
typographical errors or inaccuracies of stated information
shall only be made by LG Electronics Inc.
LG Electronics
BLUETOOTH®Mono Headset
HBM-760 / HBM-761 User manual
HBM-760
HBM-761
3
Introduction
The LG Bluetooth®Headset HBM-760/761 is a light weight wireless
Headset utilizing Bluetooth®technology. This product can be used
as an audio accessory for devices supporting either the Headset or
Handsfree Bluetooth®Profiles.
Bluetooth®Headset User manual
Charger
Warranty Card
Included in package
2
Table of Contents
Introduction 3
Part Description 4
How to use 5
- Change direction 5
- Charging 5
- Low battery 5
- Power on 5
- Power off 6
- Pairing 6
- Auto Reconnect 7
- Volume control 7
- Calling 8
�Answering a call 8
�Making a call 8
�Voice dialing 8
�Last number redial 8
�Ending a call 8
�Transferring a call 8
�Call waiting 8
�Call Reject 8
Summary of button functions 9
LED indication 9
Troubleshooting 10
Specification 10
Precautions 11
Declaration of confirmation 13
Additional information 13
Limited warranty 16
Important safety information
16
Front
Back
4 5
How to use
Volume UP / Down Button
LED indicator
Speaker
MIC
On the left Rotation On the right
Change direction
Charging Port
Part Description
Earloop
Power Button
Charging
Low battery
Power on
- Remove the cover on the charging port and connect the charger.
- When the charger is connected, with power on or off, the Headset
will turn off. While charging, the LED indicator will show a solid blue light
.
- The buttons will not function while the device is charging.
- It takes 2 hours to fully charge the Headset.
- When charging is complete, the LED indicator will turn off.
- A low battery tone will play once every 30 seconds.
- If the battery is not charged, the Headset will turn off.
- Press and Hold the PWR button for 4 seconds.
�The power will turn on and a booting tone will play.
Call Button
On the left Rotation On the right
[HBM-760]
[HBM-761]