LG HBM560 User Manual

FCC CONCERNS

RF Exposure Statement:

The antenna(s) used for this device must not be co-located or operating in conjunction with any other antenna or transmitter.

Do not

Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment.

The LG Bluetooth® headset HBM-560 is a light weight wireless Headset utilizing Bluetooth® technology.

This product can be used as an audio accessory for devices supporting either the Headset or Handsfree Bluetooth® Profiles.

■Included in package

■Change direction

■Charging

- Remove the cover on the charging port and connect the charger.

- When the charger is connected, with power on or off, the headset will turn off. While charging, the LED indicator will show a solid blue light. - The buttons will not function while the device is charging.

- It takes 2 hours to fully charge the headset.

- When charging is complete, the LED indicator will turn off.

■Low battery

- The LED indicator will blink blue when the battery power is low.

- When the battery is not charged, the LED indicator will blink blue and then turn off.

■Power on

- Press and hold the PWR/END button for 2 seconds. ● The headset will turn on and a booting tone will play.

■Power off

-Press and hold the PWR/END button for at least 2 seconds.

●A shutdown tone will play, the Bluetooth® link will disconnect, and the headset will turn off.

■Pairing

-Prior to using the Headset for the first time, you must pair it with a Bluetooth-enabled handset.

-Enter the pairing mode with pressing and holding the CALL button for 5 seconds.

●You will hear two short beeps and the LED indicator will show a solid blue light, when the device enters Pairing Mode.

Using your Handset, find the Bluetooth® Menu and "search for" or "add” new devices.

Select ”LG HBM-560” from the list of devices and pair it with your handset.

When asked for the Pass/PIN code during the pairing procedure, please enter “0000” (4Zeros).

●Once pairing has completed successfully, you will hear a beep.After pairing successfully, be sure to “Connect” to the HBM-560.

●If you want to pair with other devices in the future, the headset must be placed in Pairing Mode.

●If the HBM-560 is in "Pairing Mode" for 3 minutes, without being paired to a device, the Headset will automatically turn off.