LG HBM-520 User Manual
All rights reserved.
LG Electronics Inc., 2008
Note : For the best performance and
to prevent any damage to, or misuse of the
HBM-520, please read all of the information
carefully prior to using the HBM-520.
Any modifications or changes to this manual due to
typographical errors or inaccuracies of stated information
shall only be made by LG Electronics Inc.
LG Electronics
BLUETOOTH®Mono Headset
HBM-520 User manual
English
Español
Français
3
Introduction
The LG Bluetooth®Headset HBM- 520 is a light weight wireless
Headset utilizing Bluetooth®technology. This product can be used
as an audio accessory for devices supporting either the Headset
or Handsfree Bluetooth®Profiles.
Bluetooth®Headset User manual
Charger
Warranty Card
Included in package
2
Table of Contents
Introduction 3
Part Description 4
How to use 4
- Change direction 4
- Charging 5
- Low battery 5
- Power on 5
- Power off 5
- Pairing 5
�Easy Pairing 5
�Manual Pairing 6
- Auto Reconnect 6
- Volume control 7
- Calling 7
�Answering a call 7
�Making a call 7
�Voice dialing 7
�Last number redial 7
�Ending a call 7
�Transferring a call 7
�Call waiting 8
�Call Reject 8
- Multipoint 8
- Ear Loop Attachment and Removal 9
Summary of button functions 9
LED indication 10
Troubleshooting 10
Specification 11
Precautions 11
Declaration of confirmation 13
Additional information 13
Limited warranty 16
Important safety information 16
Ear loop
Back
4 5
Volume UP /
Down Button
Speaker
Rear MIC
Part Description
Power Button
Charging
Low battery
Power on
Pairing
Power off
How to use
- Remove the cover on the charging port and connect the charger.
- When the charger is connected, with power on or off, the Headset
will turn off.
- While charging, the LED indicator will show a solid blue light.
- The buttons will not function while the device is charging.
- It takes 2 hours to fully charge the Headset.
- When charging is complete, the LED indicator will turn off.
- A low battery tone will play once every 30 seconds.
- If the battery is not charged, the Headset will turn off.
- Press and Hold the PWR button for 3 seconds.
�The power will turn on and a booting tone will play.
- Press and hold the PWR button for 4 seconds.
�A shutdown tone will play, the Bluetooth link will disconnect,
and the power will turn off.
- Prior to using the Headset for the first time, you must pair it with a
Bluetooth-enabled handset.
- There are 2 Pairing Mode Methods with the HBM-520.
1) Easy Pairing
�With the Power off, press and hold the PWR button for 3 seconds,
to turn on the HBM-520.
�The Headset will enter Auto-Reconnect mode, for 10 seconds
(If your Headset has been previously paired to the handset, the
Headset will automatically reconnect to the handset, when the
HBM-520 is powered on.)
�After 10 seconds, the HBM-520 will automatically enter Paring Mode.
�When the Headset enters Pairing Mode, the LED indicator will show
a solid blue light.
Front
LED indicator
Charging Port
Call Button
Front MIC
How to use
Change direction
76
How to use
Volume control
Auto Reconnect
� Using your handset, find the Bluetooth Menu and “search for” or
“add” new devices.
�
Select “LG HBM-520” from the list of devices and pair it with your handset.
� When asked for the Pass/PIN code during the pairing procedure,
please enter “0000” (4 Zeros).
� Once pairing has completed successfully, you will hear a beep.
� After pairing successfully, be sure to “Connect” to the LG HBM-520.
� If you want to pair with a different device in the future, the Headset
must be placed in Pairing Mode.
� If the Headset is in Pairing mode for three minutes without being
connected to a handset, the HBM-520 will automatically turn off.
2) Manual Pairing
� With the Power off, press and hold the PWR button for 5 seconds.
� When the Headset enters Pairing Mode, the LED indicator will show
a solid blue light.
� Using your handset, find the Bluetooth Menu and “search for” or
“add” new devices.
� Select “LG HBM-520” from the list of devices and pair it with your
handset.
� When asked for the Pass/Pin code during the pairing procedure,
please enter “0000” (4 Zeros)
� Once pairing has completed successfully, you will hear a beep.
� After pairing successfully, be sure to “Connect” to the LG HBM-520.
� If you want to pair with a different device in the future, the Headset
must be placed in Pairing Mode.
� If the Headset is in Pairing mode for three minutes without being
connected to a handset, the HBM-520 will automatically turn off.
- When the HBM-520 turns off (accidentally or intentionally) while
connected to a handset, the Headset and handset will disconnect.
The Headset and handset will automatically reconnect when the
HBM-520 is turned back on.(as long as both devices are within
the required range of 33ft. or 10m).
[ Out of range ]
- When the HBM-520 and your handset are separated by a distance of
33 feet (10 meters) or more, the Headset and handset will disconnect.
Calling
How to use
Answering a call
- When there is an incoming call, the Headset will ring.
- Briefly press the CALL button to answer an incoming call.
Making a call
- If you make a call from the handset, the call will (subject to phone
settings) automatically transfer to the Headset. If the call is not
automatically transferred, you can manually transfer the call by briefly
pressing the CALL button on the HBM- 520 (Headset and handset
must be paired).
Voice dialing*
- Briefly press the CALL button to activate “Voice Command”.
You will get the best results if you record the voice dialing tag through
your Headset.
NOTE: If the handset does not support Voice Dialing, it is possible
that performing this action will activate Last Number redial.
Last number redial*
- Press and hold the CALL button for 1second to activate “Last Number
Redial”. The Headset will beep, and call the last number dialed.
Ending a call
- Briefly press the CALL button.
Transferring a call*
- While on a call on your handset, briefly press the CALL button to transfer
the audio to the Headset.(Headset and handset must be paired).
- And to transfer a call from the Headset to handset, press and hold
VOLUME UP button for 5 seconds.
When the handset and HBM- 520 are brought back within the required
distance, the HBM- 520 will automatically reconnect with the handset.
- If the Headset and handset do not automatically reconnect when they
are back within the required range, briefly press the CALL button on
the HBM-520 to reconnect manually.
- Press the VOLUME UP or VOLUME DOWN button to adjust the
speaker volume.
- There are eight levels of speaker volume
.
8
How to use
Summary of button functions
Function
HBM-520
Status
Action
Power on Power off Press the PWR button for 3 seconds.
Power off Power on Press the PWR button for at least
4 seconds.
Volume up Talking Briefly press the Volume Up button.
Volume down Talking Briefly press the Volume Down button.
Transferring a call Talking - Handset to Headset
Briefly press the CALL button on the
HBM-520(Headset and handset must
be paired)
- Headset to handset
Press and hold the VOLUME UP button
on the HBM-520 for 5 seconds.
Answering a call Ringing Briefly press the CALL button.
Ending a call Talking Briefly press the CALL button.
Call waiting Talking Press the CALL button for 1 second.
Last number redial Idle Press the CALL button for 1 second.
Voice dialing Idle Briefly press the CALL button.
(handset must support)
Manual pairing Power off
Press the
PWR
button for 5 seconds.
Call reject Ringing Press the
CALL
button for 1 second.
Multipoint
Call waiting*
- Answer a second call without hanging up the first call by pressing the
CALL button for 1second. Press the CALL button for 1 second to
return to the original call.
- Briefly press the CALL button to terminate the active call or both calls
at once. (subject to handset's support)
Call Reject*
- Activate Call Reject by pressing the CALL button for 1second when
the handset rings.
* It is possible to use these functions only when your handset supports
them. For further information about using these features, please
consult your handset's user manual.
The LG HBM-520 is capable of having two handsets connected to the
Headset at the same time. This will give you the freedom of having only
one Headset to operate both your handsets.
Multipoint Connect
- Pair the Headset with one of your Bluetooth-enabled handsets.
(per the pairing instructions on pages 5-6).
- Turn off the Headset.
- With the power off, press and hold the PWR button on the HBM-520
for 5 seconds to enter Manual Pairing mode.
- Now, pair and connect the Headset with your other Bluetooth-enabled
handset. (This will be your Primary handset).
- Once this handset is paired and connected, go back and connect the
first paired handset to Headset. (This will be your Secondary handset).
* Note: When the HBM-520 is connected to two handsets at the same
time (Multipoint), the Headset calling functions will work with
the most recently used handset.
Calling Function
- Voice Dial and Last Number Redial features work with the Primary
handset. (most recently used handset).
- The first connected device is set as primary handset and the next
connected device is set as secondary handset.
- The device which made the last outgoing call will always be set as
the primary handset.
- To answer an incoming call on your secondary handset, while on a call
on your primary handset, hang-up the active-call (briefly press the CALL
button) and then answer the incoming-call (briefly press the CALL
button again).
9
How to use
Ear Loop Attachment and Removal
Attaching the ear loop
- Hold the ear loop just above the base (C shaped part), and snap it
into place behind the speaker on the HBM-520.
Removing the ear loop
- Hold the ear loop at the base (C shaped part), and pull, to unhook
the ear loop from the HBM-520.
Note: The ear loop can be attached to the HBM-520, as an option,
if necessary. Not every user will need to attach the ear loop.
Troubleshooting
10
Do not modify, repair, or take apart.
Do not expose directly to water,
alcohol, benzene, etc. for cleaning.
Do not expose directly to flammables.
Does not turn on Check whether the battery Charge the battery.
of the HBM-520 is fully
charged.
Unable to Check whether Determine whether your
communicate with the handset supports handset supports
the LG Bluetooth
®
the Headset or Handsfree the Headset or Handsfree
Headset HBM-520 Bluetooth profiles. Bluetooth profiles.
Check whether the battery Charge the battery.
of the HBM-520 is low.
Unable to pair the Check and make sure the Press and hold the PWR
HBM-520 with the Headset is on. button for at least 3 seconds
Bluetooth
®
device to turn on the Headset.
Check and make sure With the power off, press
the Headset is placed and hold the PWR button
in pairing mode. for 5 seconds to place the
Headset in pairing mode.
Low sound
(speaker)
Check the speaker volume.
lncrease the volume level.
LED indication
Function HBM-520 Status Action
Operating Power on The blue LED light flickers 4 times.
Power off The blue LED light flickers 4 times
and then turns off.
Pairing mode The blue LED light stays on.
Headset/handsfree The blue LED light flickers
Profile connected 2 times every 5 seconds.
Call connected The blue LED light flickers
2 times every 5 seconds.
Charging Charging The blue LED is stays on.
Charging complete LED is turned off.
Precautions
Specification
ITEM Description
Bluetooth®specification V2.1 (Handsfree / Headset profiles)
Battery Battery 3.7V / 120mAh Li-Polymer
Stand by time Up to 250Hrs
Talk Time Up to 7Hrs
Charging time < 2Hrs
Operation temperature -10℃~60℃
Dimension / weight
18.4mm(W) X 52.5mm(L) X 12.0mm(T) / 10.9g
Do not drop the unit from high places.
11
Declaration of Confirmation
1312
FCC NOTICE TO USERS :
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
IMPORTANT NOTE :
To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure requirements
and void user's authority to operate the device.
Hereby, LG Electronics Inc. declares that this HBM-520 is in compliance
with the essential requirements and other relevant provisions of Directive
1999/5/EC.
Additional Information
1. Radio frequency exposure
This Bluetooth®Headset, HBM-520, is a radio transmitter and
receiver. When in operation, it communicates with a Bluetooth
®
equipped mobile device by receiving and transmitting radio frequency
(RF) electromagnetic fields (microwaves) in the frequency range
2.4 to 2.4835 GHz. The output power of the radio transmitter is low,
0.001 watt. Your Bluetooth
®
Headset is designed to operate in
compliance with the RF exposure guidelines and limits set by
national authorities and international health agencies when used
any compatible LG Electronics mobile phone.
2. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially
explosive atmosphere. It is rare, but your electronic device could
generate sparks. Sparks in such areas could cause an explosion or
fire resulting in bodily injury or even death. Areas with a potentially
explosive atmosphere are often, but not always, clearly marked.
Keep unit away from humidity & dust.
Do not place heavy objects on the unit.
Precautions
Please only use the Headset with an LG
original charger (Travel Adaptor, Vehicle
Power Charger). Otherwise the Headset
might be damaged.
�Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
�There is a risk of explosion if the battery is
replaced by on incorrect type.
�Dispose of used batteries according to
the instructions.
Do not place or keep the unit near
flammables.
1514
3.Emergency calls
IMPORTANT!
This Bluetooth
®
Headset and the electronic device connected to the
Headset operate using radio signals, cellular and landline networks
as well as user - programmed functions, which cannot guarantee
connection under all conditions. Therefore you should never rely
solely upon any electronic device for essential communications (e.g.
medical emergencies). Remember, in order to make or receive calls,
the Headset and the electronic device connected to the Headset must
be switched on and in a service area with adequate cellular signal
strength. Emergency calls may not be possible on all cellular phone
networks or when certain network services and/or phone features are
in use. Check with your local service provider.
4. Battery information
A rechargeable battery has a long service life if treated properly.
A new battery or one that has not been used for a long period of
time could have reduced capacity the first few times it is used.
Do not expose the battery to extreme temperatures, never above
+60°(+140°F) or under -20°(-4°F). For maximum battery capacity,
use the battery in room temperature. If the battery is used in low
temperatures, the battery capacity will be reduced. The battery
can only be charged in temperatures between +10°(+50°F) and
+45°(+113°F). For your safety, do not remove the battery incorperated
in the product. If you need to replace the battery, take it to the nearest
authorised LG Electronics service point or dealer for assistance.
5. Recycling the battery in your Bluetooth
®
Headset
The battery in your Bluetooth
®
Headset must be disposed of properly
and should never be placed in municipal waste. The LG Electronics
service partner removing battery will dispose of it according to local
regulations.
6. Conditions
-The warranty is valid only if the original receipt issued to the original
purchaser by the dealer, specifying the date of purchase and serial
number, is presented with the product to be repaired or replaced.
LG Electronics reserves the right to refuse warranty service if this
information has been removed or changed after the original
purchase of the product from the dealer.
- If LG Electronics repairs or replaces the product, the repaired or
replaced product shall be warranted for the remaining time of the
original warranty period or for ninety (90) days from the date of
repair, whichever is longer. Repair or replacement may involve the
use of functionally equivalent reconditioned units. Replaced parts
or components will become the property of LG Electronics.
- This Warranty does not cover any failure of the product due to
normal wear and tear, or due to misuse, including but not limited to
use in other than the normal and customary manner, in accordance
with instructions for use and maintenance of the product. Nor does
this warranty cover any failure of the product due to accident,
modification or adjustment, acts of God or damage resulting from
liquid.
- This warranty does not cover product failures due to improper
repair installations, modifications or service performed by a nonLG Electronics authorized person. Tampering with any of the seals
on the product will void the warranty.
- THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR
ORAL, OTHER THAN THIS PRINTED INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS
VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT
LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL
EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW.
�
Some countries/states do not allow the exclusion or limitation of
incidental or consequential damages, or limitation of the duration
of implied warranties, so the preceding limitations or exclusions
may not apply to you. The warranty provided does not affect the
consumer's statutory rights under applicable national legislation in
force, nor the consumer's rights against the dealer arising from
their sales/purchase contract.
Additional Information Additional Information
Loading...