LG HBM310 Users manual

All rights reserved.

LG Electronics Inc., 2008

Note : For the best performance and

to prevent any damage to, or misuse of the

HBM-310, please read all of the information

carefully prior to using the HBM-310.

Any modifications or changes to this manual due to

typographical errors or inaccuracies of stated information

shall only be made by LG Electronics Inc.

LG Electronics

BLUETOOTH®Mono Headset
HBM-310 User manual

English

Español
Français

3

Introduction

The LG Bluetooth®Headset HBM- 310 is a light weight wireless
Headset utilizing Bluetooth®technology. This product can be used
as an audio accessory for devices supporting either the Headset
or Handsfree Bluetooth®Profiles.

Included in package

2

Table of Contents

Introduction 3
Part Description 4
How to use 5

- Charging 5

- Low battery 5

- Power on 5

- Power off 5

- Pairing 5

- Auto Reconnect 7

- Volume control 7

- Calling 8

�Answering a call 8
�Making a call 8
�Voice dialing 8
�Last number redial 8
�Ending a call 8
�Transferring a call 8
�Call waiting 8
�Call Reject 8

Summary of button functions 9
LED indication 9
Troubleshooting 10
Specification 10
Precautions 11
Declaration of confirmation 13
Additional information 13
Limited warranty 16
Important safety information 16

Bluetooth®Headset User manual

Charger

Warranty Card

Front

Back

4 5

Volume UP / Down Button

LED indicator

Speaker

MIC

Charging Port

Part Description

Power Button

Charging

Low battery

Power on

- Remove the cover on the charging port and connect the charger.

- When the charger is connected, with power on or off, the Headset
will turn off. While charging, the LED indicator will show a solid blue light

.

- The buttons will not function while the device is charging.

- It takes 2 hours to fully charge the Headset.

- When charging is complete, the LED indicator will turn off.

- A low battery tone will play once every 30 seconds.

- If the battery is not charged, the Headset will turn off.

- Press and Hold the PWR button for 4 seconds.

�The power will turn on and a booting tone will play.

Call Button

Pairing

Power off

- Press and hold the PWR button for 2 seconds.

�A shutdown tone will play, the Bluetooth link will disconnect,

and the power will turn off.

- Prior to using the Headset for the first time, you must pair it with a
Bluetooth-enabled handset.

- There are 2 Pairing Mode Methods with the HBM-310.

How to use