
LG Electronics
BLUETOOTH® Mono Headset
HBM-280 User Manual
Note: For the best performance and to prevent
Any modications or changes to this manual due to
typographical errors or inaccuracies of stated information
English
Español
Rev 1.0 US
All rights reserved.
LG Electronics Inc., 2011
any damage to, or misuse of the HBM-280,
please read all of the information
carefully before to use.
shall only be made by LG Electronics Inc.

Table of Contents Introduction
ENG
Introduction 3
- Included in Package 3
Description of parts 4
How to use 4
- Change direction 4
- Charging 5
- Low battery 5
- Battery status alert 5
- Power on 5
- Power off 5
- Pairing 6
- Auto-reconnect 7
- Volume control 7
- Calling 7
• Answering a call 7
• Making a call 7
• Voice dialing 8
• Last number redial 8
• Ending a call 8
• Transferring a call 8
• Call waiting 8
• Call reject 8
• Mic mute 8
- Advanced multipoint 9
- Audio streaming (A2DP) 10
- HD speaker 10
- SMS reader 10
Summary of button functions 11
LED indication 12
Troubleshooting 12
Specification 13
Precautions 13
Declaration of confirmation 14
Additional information 14
Limited warranty 17
Important safety information 17
The LG Bluetooth® Headset HBM-280 is a light weight wireless headset that uses
Bluetooth® technology.
This product can be used as an audio accessory for devices that support the
headset or hands-free Bluetooth® proles.
Included in the package
LG HBM-280
Bluetooth® Headset
Ear loop Charger
User manual Warranty Card
ENG

Description of parts How to use
Front
ENG
LED Indicator
Back
Microphone
Call Button
Volum Up/Down
Button
Speaker
Power Switch
Charging Port
How to use
Change direction
Left Right
Charging
- When the charger is connected, with power on or off, the headset will turn off.
- While charging, the LED indicator will show a solid white light.
- The buttons will not function while the device is charging.
- It takes 2 hours to fully charge the headset.
- When charging is complete, the LED indicator will turn off.
Low battery
- An announcement will play once every 2 minutes.
- If the battery is not charged, the headset will turn off.
Battery status alert
- By pressing and holding the VOLUME DOWN button for 3 seconds, you can check
the battery status of the HBM-280. The audible battery status alert will inform you of
the battery level. There are 3 levels of battery power:
1. Battery High
2. Battery Medium
3. Battery Low
Power on
- Move the power switch to the ‘ON’ position.
• The power will turn on and a startup tone will play.
- The audible battery status alert will let you know the battery level.
Power off
- Move the power switch to the ‘OFF’ position.
• A shutdown tone will play, the Bluetooth link will disconnect and the power will
turn off.
ENG